1x UFR-1230-D Double speed controller from BEIER. Especially for Ket

Speed ​​controller for TWO brushed DC motors. Specially developed for tracked vehicles/ships. Powerful BEC with 5,6V 3A.
Optional load control, inertia and handbrake function.
Very detailed information on "Drive Teacher" adjustable.
The speed controller is characterized by a high level of sensitivity. The control is very realistic and dynamic and guarantees absolute driving pleasure.
With a wide range of setting options, the speed controller can be easily and individually adapted to the most diverse model requirements and driving characteristics.
The settings are made via a DIP switch or using the "Drive Teachers".

At the 8 light outputs the illumination of the model can be connected directly to the cruise control.
All lighting and additional functions of the cruise control can be controlled via nautic and multiswitch modules.
Features:
-Supply Voltage: 6-18V
-Max. Motor current 2x 30 A (continuous) 60A (short-term)
-PWM Clock 20 or 40kHz
-8 Switching outputs for lighting
- Powerful BEC 5,6V 3A short-circuit proof
-3 proportional inputs (Gas1, Gas2, steering, tax)
-2 proportional outputs (for sound module)
-Mailsafe At reception interference (motor stop)
-Anlaufschutz At power
Battery pack voltage monitoring
Temperature Monitoring
-Kurzschlusschutz Motor Drive

About DIP switch:
-Lastenregelung On / off
Handbrake function on / off
-Handbremsfunktion On / off
-Choice Of battery types: LiPo / other type
-Anlernfunktion (Setup) for gas channel on / off

About Drive Teacher adjustable (K-USB 2 required!):
-firmwareupdate
-Diagnose
-Kanalinvertierung
-disconnection Undervoltage monitoring
Reduction of return speed to 50%
Choosing the PWM clock frequency 20 or 40kHz
Setting the load control
Activation / adjustment of Inertia
-Activation of the emergency brake function
Setting the handbrake hardness
-Setting the 2 throttle curves
Configuration of the switching outputs (output type, brightness, xenon)
Configuration of the light switch
Configuration of the control channel

Configuration of nautic / multiswitch modules
The speed controller is delivered with a standard configuration and is immediately ready for use!

The data cable is therefore only required if settings of the standard configuration are to be changed.

Technical data:
-Abmessung: 80 50 x x 23 mm
-Weight: 95g
Connection cable: 2x2,5qmm, 25cm long with Deans-T plug
-Motor Cable: 4x 2,5qmm, about 25cm long
-Service cable to the receiver: 3x0,14qmm, 30cm long.