MFR-1210 mini speed controller from BEIER. Especially for Nebenant

1x MFR-1210 Mini Cruise Control from BEIER. Especially for auxiliary and auxiliary drives.

Mini speed controller for DC brush motors
Especially for auxiliary and auxiliary drives and
for the complete cruise control of small models
Supply voltage: 6 - 16 V DC
Max. Motor current: 10 A
BEC with 5,0 V and 0,5 A (max 1 A)
PWM clock frequency 20 kHz
Jerk-free EMF motor brake
Gentle polarity reversal by monitoring the engine speed
Acoustic warning signal in the event of overtemperature, overcurrent and interference
Small size: 26 x 19 x 6 mm

The MFR-1210 Mini Travel Controller is a small and versatile travel controller for brush motors up to 10 A. It steers steplessly and sensitively the forward and reverse travel and includes a BEC with 5 V.
At a PWM clock frequency of 20 kHz, no annoying whistling sounds are audible.
The MFR-1210 is suitable for use in functional model making, especially for auxiliary and auxiliary drives, but also for the complete drive of small models.

Due to the small dimensions and the simple connection, movements of, for example, semi-trailer supports and lift arms, or tilting functions and turning the tower in tanks can be easily implemented and controlled.
As soon as no gas is given and the gas channel is in neutral, the cruise control actively brakes with the EMF engine brake until the model comes to a standstill (with a braking ramp).

For gentle operation of the engine and battery, the engine speed is continuously monitored. This is especially important when switching between forward and reverse travel. Before a polarity reversal, the motor is braked to a standstill and then accelerated in the other direction.

The speed controller requires no additional training of the transmitter. The zero point range (center position) of the throttle channel is suitable for almost all remote controls, with 1,500 ms.

By acoustic signals the mini cruise control warns of over temperature, overcurrent and missing signal from the receiver.

In order to equip the motor movements with the appropriate sound and to control the speed of the motors, the speed controller can be connected to the servo outputs of the following BEIER modules:

Sound module USM-RC-2
Light module SM-IR-16-2
Expansion module EXM-2