Go to home page
Wish lists
€ 0,00 *

Filter products

7-chamber rear light unit (1 pair) without board. Dimensions
7-chamber rear light unit (1 pair) without board. Dimensions
7-chamber rear light unit (1 pair) without circuit board. Overall dimensions: 32x12x7mm The base body is chrome-plated on the inside. (500907037) Instructions can be downloaded here. Suitable lighting circuit boards in SMD technology can be found under item number 3103 (for 12V) or 3104 (for 7,2V) or 3105 (for 4,8V). Also the lighting set for Carson trailers, item 7786. When using the lighting circuit boards (not included), the following lighting functions are possible. (suitable control required).Tail lightBrake lightReverse lightIndicator/hazard warning lightsRear fog light

Available immediately, delivery time: 1-4 days

Product number: 1905

15,99 € 19,49 € (17.96% saved)
Low loader tires, 1 piece, solid rubber, 59 29 x x 16mm (outside
Low loader tires, 1 piece, solid rubber, 59 29 x x 16mm (outside
Low loader tire, 1 piece, solid rubber, 59 x 29 x 16mm (outside x inside x wide) Fulda Ecotonn 245/70 R 17.5. Scope of delivery: 1 piece. Article has been replaced by successor article 10496. Matching rims: made of plastic: article 1911, 3821, 4365, 5113, 8544, 8864. made of aluminum: article 7978, 8198, 8822.  

No longer available

Product number: 6970

6,28 €
Details
Spray paint can 100ml, black, satin finish, TS-29
Spray paint can 100ml, black, satin finish, TS-29
1x spray paint can 100ml, black, satin finish. TS-29. Acrylic paint spray for plastic, wood, metal, glass and ceramics. This paint spray is very handy and, thanks to its content and size, is suitable for spraying models. As it is made from paint, its drying time is short. The can contains 100 ml. With 2-4 of these cans (depending on the opacity of the paint) a Tamiya truck cab can be painted. Tamiya paint sprays are not affected by acrylic or enamel paints. After spraying the entire model surface with paint spray, details can be painted with acrylic or enamel paints. By combining three types of paint, colorful paints can be produced easily and reliably.Contents: 100 mlSignal word DangerHazard statements:H222 Extremely flammable aerosol.H229 Pressurized container: may burst if heated.H315 Causes skin irritation.H318 Causes serious eye damage.H335 May cause respiratory irritation.H336 May cause drowsiness or dizziness.EUH066 Repeated exposure may cause skin dryness or cracking.Safety statements:P102 Keep out of reach of childrenP210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211 Do not spray on an open flame or other ignition source.P251 Do not pierce or burn, even after use.P261 Avoid breathing gas/mist/vapours/spray.P271 Use only outdoors or in a well-ventilated area.P280 Wear protective gloves/protective clothing/eye protection/face protectionP302+P352 IF ON SKIN: Wash with plenty of water/acetone.P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.P310 Immediately call a POISON CENTER or doctor/physician.P332+P313 If skin irritation occurs: Get medical advice/attention.P362+P364 Take off contaminated clothing and wash before reuse.P405 Store locked up.P410+412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.Warning! Not suitable for children under 14 years.

Available immediately, delivery time: 1-4 days

Product number: 7781

Content: 0.1 liters (€77,00 / 1 liter)

7,70 € 10,49 € (26.6% saved)
Marker lights orange, 2 piece, scale 1 / 14
Marker lights orange, 2 piece, scale 1 / 14
2x orange marker lights, suitable for 1/14 scale from 7,2-12 V. Made of plastic with glued-in SMD LED. LxWxH: 8x4x1,2mm collar: 3,2x2mm 500907382 200mm cable length. Incl. 2 resistors

Available immediately, delivery time: 1-4 days

Product number: 9906

30,99 €
2 rectangular headlights with LED lighting for 12V
2 rectangular headlights with LED lighting for 12V
2 rectangular headlights with LED lighting for 12V. (207078). Housing made of plastic. Light disc grooved. Dimensions approx. 8,5x8,5x7mm. Total height with base approx. 14mm. Mounting base 2mm diameter 50090757 12V versionIdeal for front and rear lighting for the Carson LR634 track loader.Scope of delivery2 housings, black2 light discs, clear, grooved2 resistors with 510 Ohm are included.2 lighting boards with approx. 20cm cableInstructions

Available immediately, delivery time: 1-4 days

Product number: 7647

21,99 € 26,99 € (18.53% saved)
new/untreated EPAL Euro pallet in scale 1:14,5. Suitable
new/untreated EPAL Euro pallet in scale 1:14,5. Suitable
1 new/untreated EPAL Euro pallet in 1:14,5 scale. Matching the Wedico scale. Handcrafted from untreated pinewood. With original EPAL and EURO branding stamps. 83x55x10mm. EPAL Euro pallet. The pallet is sawn all around and not sanded - like the original! Dimensions: 83 x 55 x 10 mm We only have this item in stock in small quantities! The delivery time can therefore be around 3 weeks!

Available immediately, delivery time: 1-4 days

Product number: 7664

5,59 € 5,99 € (6.68% saved)
Tie rod, bent, steel. Improves steering behavior
Tie rod, bent, steel. Improves steering behavior
1 tie rod, bent, steel. Improves the steering behavior. Suitable for all Tamiya Euro tractors. (500013516). Overall length 105mm with each M3 thread on both ends.

Available immediately, delivery time: 1-4 days

Product number: 6612

7,49 € 8,49 € (11.78% saved)
Bellows, soft, (as a dummy air suspension). Made of rubber,
Bellows, soft, (as a dummy air suspension). Made of rubber,
Bellows, soft, (as a dummy air suspension). Made of rubber, suitable for light models to 5kg. (2 piece). Height 21mm, diameter 20mm. (500907357)

Available immediately, delivery time: 1-4 days

Product number: 5237

5,99 € 6,99 € (14.31% saved)
1x spray paint tin 100ml, clear coat, glossy, TS 13
1x spray paint tin 100ml, clear coat, glossy, TS 13
1x spray paint can 100ml, clear varnish, glossy. TS-13. Acrylic paint spray for plastic, wood, metal, glass and ceramic. This paint spray is very handy and, thanks to its content and size, is suitable for spraying models. As it is made from a paint base, its drying time is short. The can contains 100 ml. With 2-4 of these cans (depending on the opacity of the paint) a Tamiya truck cab can be painted. Tamiya paint sprays are not affected by acrylic or enamel paints. After spraying the entire model surface with paint spray, details can be painted with acrylic or enamel paints. By combining three types of paint, colorful paints can be produced easily and reliably.Contents: 100 mlSignal word DangerHazard statements:H222 Extremely flammable aerosol.H229 Pressurized container: may burst if heated.H315 Causes skin irritation.H318 Causes serious eye damage.H335 May cause respiratory irritation.H336 May cause drowsiness or dizziness.EUH066 Repeated exposure may cause skin dryness or cracking.Safety statements:P102 Keep out of reach of childrenP210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211 Do not spray on an open flame or other ignition source.P251 Do not pierce or burn, even after use.P261 Avoid breathing gas/mist/vapours/spray.P271 Use only outdoors or in a well-ventilated area.P280 Wear protective gloves/protective clothing/eye protection/face protectionP302+P352 IF ON SKIN: Wash with plenty of water/acetone.P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.P310 Immediately call a POISON CENTER or doctor/physician.P332+P313 If skin irritation occurs: Get medical advice/attention.P362+P364 Take off contaminated clothing and wash before reuse.P405 Store locked up.P410+412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.Warning! Not suitable for children under 14 years.

Available immediately, delivery time: 1-4 days

Product number: 8572

Content: 0.1 liters (€76,90 / 1 liter)

7,69 € 9,99 € (23.02% saved)
2 off-road tires 11R22.5 Tamiya. Hollow tires. Outside: 84mm
2 off-road tires 11R22.5 Tamiya. Hollow tires. Outside: 84mm
2 off-road tires 11R22.5 Tamiya. Hollow tires. Outside: 84mm. Inside: 43mm. Width: 22mm. Suitable for all standard rims in Tamiya scale.

Available immediately, delivery time: 1-4 days

Product number: 11116

11,00 € 11,99 € (8.26% saved)
Rectangular spotlights with LED lighting, 7,2V. 2 pieces
Rectangular spotlights with LED lighting, 7,2V. 2 pieces
2 rectangular headlights with LED lighting, 7,2V. Plastic housing, grooved light disc. Housing approx. 8,5x8,5x7 mm. Total height with base approx. 14mm. Mounting base 2mm diameter 50090714 7,2V versionIdeal for front and rear lighting for the Carson LR634 track loader.Scope of delivery2 housings, black2 light discs, clear, grooved2 resistors with 220 Ohm are included.2 lighting boards with approx. 20cm cableInstructions

Available immediately, delivery time: 1-4 days

Product number: 7646

22,99 € 27,99 € (17.86% saved)
Spray paint can 100ml, black, glossy, TS-14
Spray paint can 100ml, black, glossy, TS-14
1x spray paint can 100ml, black, glossy. TS-14. Acrylic paint spray for plastic, wood, metal, glass and ceramic. This paint spray is very handy and, thanks to its content and size, is suitable for spraying models. As it is made from paint, its drying time is short. The can contains 100 ml. With 2-4 of these cans (depending on the opacity of the paint), a Tamiya truck cab can be painted. Tamiya paint sprays are not affected by acrylic or enamel paints. After spraying the entire model surface with paint spray, details can be painted with acrylic or enamel paints. By combining three types of paint, colorful paints can be produced easily and reliably.Contents: 100 mlSignal word DangerHazard statements:H222 Extremely flammable aerosol.H229 Pressurized container: may burst if heated.H315 Causes skin irritation.H318 Causes serious eye damage.H335 May cause respiratory irritation.H336 May cause drowsiness or dizziness.EUH066 Repeated exposure may cause skin dryness or cracking.Safety statements:P102 Keep out of reach of childrenP210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211 Do not spray on an open flame or other ignition source.P251 Do not pierce or burn, even after use.P261 Avoid breathing gas/mist/vapours/spray.P271 Use only outdoors or in a well-ventilated area.P280 Wear protective gloves/protective clothing/eye protection/face protectionP302+P352 IF ON SKIN: Wash with plenty of water/acetone.P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.P310 Immediately call a POISON CENTER or doctor/physician.P332+P313 If skin irritation occurs: Get medical advice/attention.P362+P364 Take off contaminated clothing and wash before reuse.P405 Store locked up.P410+412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.Warning! Not suitable for children under 14 years.

Available immediately, delivery time: 1-4 days

Product number: 8573

Content: 0.1 liters (€79,80 / 1 liter)

7,98 € 9,99 € (20.12% saved)
1x spray primer 180ml, fine white.
1x spray primer 180ml, fine white.
1x spray primer 180ml, fine white. Well-covering primer for plastic and metal. Spray can with spray head, 180ml capacity. 87044/XNUMX RC Crawler Car XNUMXGhz XNUMXWD Off-Road Vehicle. Superfine spray primer - the first step to perfect painting. High coverage and adhesion without covering the model details. The primer evens out light scratches and unevenness. This is available in different container sizes (100ml/180ml) and colors.The primers are suitable for the following surfaces/materials: plastic (ABS, polystyrene (PS)), metal (steel, aluminum, die-cast (zinc die-cast)), wood, ceramic.The primed surface can also be wet-coated or painted before the paint is applied. be sanded. For this purpose we recommend TAMIYA sandpaper and sanding sponges, which can be used dry and wet and are available in grits from 320 to 3.200. TIP: Basics for selecting primers: White primers are ideal for light paint/varnish applications and light grey or dark grey colours. Grey primer for dark paintwork/colour applications.When painting red tones (e.g. TS-8 Italian Red) to prepare the model with the primer Pink (300087146), this allows the subsequent red tone on the model to shine more strongly and with more depth. Do you want to age the model, weather it or with signs of wear, it is recommended to use the primer oxide red (300087160). If you remove and/or scratch the subsequently applied paint, the effect of rust or rust spots will occur. fallen pieces of paint.Signal word DangerHazard statements:H222 Extremely flammable aerosol.H229 Pressurized container: may burst if heated.H315 Causes skin irritation.H318 Causes serious eye damage.H335 May cause respiratory irritation.H336 May cause drowsiness or dizziness.Safety statementsP102 Keep out of the reach of children.P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211 Do not spray on an open flame or other ignition source.P251 Do not pierce or burn, even after use.P261 Avoid breathing gas/mist/vapors/spray.P271 Use only outdoors or in a well-ventilated area.P280 Wear protective gloves/protective clothing/eye protection/face protection.P302+P352 IF ON SKIN: Wash with acetone and plenty of water.P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.P310 Immediately call a POISON CENTER or doctor/physician.P332+P313 If skin irritation occurs: Get medical advice/attention.P362+P364 Take off contaminated clothing and wash before reuse.P405 Store locked up.P410+412 Protect from sun exposure. Do not expose to temperatures above 50 °C/122 °F.Caution! Not suitable for children under 14 years.

Available immediately, delivery time: 1-4 days

Product number: 7784

Content: 0.18 liters (€66,67 / 1 liter)

12,00 € 14,79 € (18.86% saved)
2 aluminum U-profile, 1m long 21x7x1,5mm material thickness
2 aluminum U-profile, 1m long 21x7x1,5mm material thickness
2 aluminum U-profiles, 1m long, 21x7x1,5mm, material thickness 1,5mm, drawn from bright aluminum. Rounded edges. Dimensions correspond to the Tamiya frame profile. (500907063). 2x 1m pieces.

Available immediately, delivery time: 1-4 days

Product number: 7652

21,99 € 24,49 € (10.21% saved)
3-chamber rear light unit (1 pair) around with
3-chamber rear light unit (1 pair) around with
3-chamber rear light unit (1 pair) round with red/orange light discs, ALU base body 11mm diameter. Slot width for LEDs 2,2mm! 500907039. Item number 5641 (12V) or 3817 (7,2V with series resistor if necessary) is suitable as a light source. Both bulbs can be used lying down for the indicator light (middle) or standing up for the brake and tail light (top and bottom). For those who like low power consumption, we offer SMD LEDs with soldered wires under item numbers 6341 (red) and 6340/6342 (white)! These LEDs can be used almost anywhere in model making due to their very small size of just 2x1,25mm. In addition, the annoying fiddling around of soldering the wires to these tiny things is no longer necessary! Fastened using a central M2 screw. 4 holes with a 2mm diameter for the wires to pass through. Tip: We recommend that you first mount the red light discs on the aluminum base body and only then carefully separate the outer spray edge. This can prevent the thin connecting bridge between the red parts from breaking. The light discs are available separately as replacement items under item number 3407 if required.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 3240

17,99 € 19,49 € (7.7% saved)
1 sentence roof lamps boards for 7,2V. 2 boards with SMD LED
1 sentence roof lamps boards for 7,2V. 2 boards with SMD LED
1 set of roof lamp boards for 7,2V. 2 boards with SMD LED and series resistor to match the roof lamps. Longer wire = positive pole! 500907184 These boards fit the following items:3818381925024004523556026361Mixing up the connections will destroy the SMD LED!!!!Diameter of the board approx. 8,3mmTotal thickness approx. 2,3mm

Available immediately, delivery time: 1-4 days

Product number: 7440

12,99 € 14,49 € (10.35% saved)
2 streets-wide tires, 385 / 65R22.5, TAM-scale, 83mm
2 streets-wide tires, 385 / 65R22.5, TAM-scale, 83mm
2 wide road tires, 385/65R22.5, hard. TAM scale, 83mm outside, 44mm inside, 28mm wide. Original Tamiya spare part, 2 pieces. 309808176/300056528. These tires fit the following Tamiya models: -Refrigerated trailer -Container trailer -Mercedes-Benz Actros 1851 Gigaspace Matching rims: Items 2498, 2666, 4441, 3566, 5612, 4542, 4548,4543, 7139, 4545, 4541, 4544, 4546, 4547, 2499.

Available immediately, delivery time: 1-4 days

Product number: 8369

14,99 € 16,79 € (10.72% saved)
1x hitch, plastic, black, actuated via servo
1x hitch, plastic, black, actuated via servo
1x towing eye, plastic, black, operated by servo. Bolt closes automatically via spring. With drawbar piece. Jaw dimensions: 30x17mm. Total height 30mm. With small fastening parts. (907182). Dimensions of the towing eye:Total length of drawbar piece: 52mmThickness of the towing eye: 4mmOuter diameter of eyelet: 9,5mmInner diameter of eyelet: 4,3mmConvex towing bolt, max. outer diameter 4mmPressure spring closes the towing bolt without being actuated by a servo. To open the towing bolt, the servo must exert a pulling force against the spring pressure.Other drawbar pieces available: Article 8429.

Available immediately, delivery time: 1-4 days

Product number: 7876

43,90 € 59,99 € (26.82% saved)
driven rear axle with self-locking differential
driven rear axle with self-locking differential
1x driven rear axle with self-locking differential with/without through-drive. Tamiya scale. Officially licensed by ZF Friedrichshafen AG. 500907268 The CARSON drive concept for TAMIYA trucks in 1:14 scale. Convert your TAMIYA 2- or 3-axle TAMIYA tractor into an all-rounder with our self-locking axles. The components can be easily replaced as they are attached to the existing mounting points. A huge advantage of these axles is that no additional space is needed for a switching servo (linkages and Bowden cables), as they lock independently/automatically in the event of a loss of traction. Officially licensed by ZF Friedrichshafen AG.You decide how you want to convert your 2- or 3-axle tractor, this is possible in two stages:Configuration options for:2-axle tractors:Mercedes-Benz Actros Gigaspace 1845, MAN TGX 18.540, SCANIA R470, VOLVO FH12, Mercedes-Benz 1838LS, Mercedes-Benz 18501, 4x2 rear axle drive (with self-locking differential)- TAMIYA® 3-speed manual transmission (modular kit) with a CARSON rear axle (self-locking)2, 4x4 all-wheel drive with 2+2 speed transmission (front axle/rear axle/transfer case self-locking)- CARSON 2-speed manual transmission Compact in conjunction with the CARSON 2-speed transfer case torque compensation (self-locking), driven front axle (self-locking), rear axle (self-locking), drive shaft set 4x4.3-axle tractor: Mercedes-Benz Actros 3363, MAN TGX 26.540, SCANIA R620)1, 6x4 rear axle drive (with self-locking differential)- TAMIYA® 3-speed manual transmission (modular system) with two CARSON rear axles (self-locking), drive shaft set 6x4.2, 6x6 all-wheel drive with 2+2 speed transmission (front axle / rear axle / transfer case self-locking)- CARSON 2-speed manual transmission Compact in conjunction with the CARSON 2-speed transfer case torque compensation (self-locking), driven front axle (self-locking), two rear axles (self-locking), drive shaft set 6x6. CARSON rear axle with self-locking differentialDetailed rear axle for TAMIYA model trucks in 1:14 scale. The axle is equipped with a self-locking differential and can be built with or without a through drive; both shafts and housing covers are included in the scope of delivery. If traction is lost, the differential locks independently/automatically and generates 100% traction. A big advantage of this drive axle is that NO shift servos, Bowden cables and linkages are required for the differential locks, which also benefits the clarity and space available in the chassis. The axle components are housed in a heavy-duty reinforced plastic axle housing. Furthermore, the rear axle can also be operated in conjunction with the standard TAMIYA 3-speed manual transmission; only the 3x6 drive shaft set (4) must be used for the 500907279-axle tractors. - True to detail rear axle - Reinforced plastic axle housing - High ground clearance thanks to a "slim" differential housing (height 33 mm) - 12-fold ball bearing - Hardened steel bevel gears - Axle ratio 1:2,66 - 5 mm transmission/input shaft - Aluminum rim driver 12 mm hexagon - Easy conversion to an axle with and without through-drive (both shafts and housing cover are included in the axle kit) - Dimensions rear axle LxWxH: 44 x 135 x 33 mm - Weight approx. 150g - Delivered as a kit with pre-assembled differential - Suitable for TAMIYA swing and independent suspension - Fits all TAMIYA and CARSON truck rims with 12mm hex drive - Self-locking differential (shift servo, linkages and Bowden cables are not required) Officially licensed by ZF Friedrichshafen AG. These axle(s) also fit the pendulum spring system (item 12698).

Available immediately, delivery time: 1-4 days

Product number: 10031

175,00 € 200,00 € (12.5% saved)
1x Sprühgrundierung 180ml, fine gray. Good covering
1x Sprühgrundierung 180ml, fine gray. Good covering
1x spray primer 180ml, fine grey. Well-covering primer for plastic and metal. (87042). Spray can with spray head, 180ml capacity. 87042/XNUMX RC Crawler Car XNUMXGhz XNUMXWD Off-Road Vehicle. Superfine spray primer - the first step to perfect painting. High coverage and adhesion without covering the model details. The primer evens out light scratches and unevenness. This is available in different container sizes (100ml/180ml) and colors.The primers are suitable for the following surfaces/materials: plastic (ABS, polystyrene (PS)), metal (steel, aluminum, die-cast (zinc die-cast)), wood, ceramic.The primed surface can also be wet-coated or painted before the paint is applied. be sanded. For this purpose we recommend TAMIYA sandpaper and sanding sponges, which can be used dry and wet and are available in grits from 320 to 3.200. TIP: Basics for selecting primers: White primers are ideal for light paint/varnish applications and light grey or dark grey colours. Grey primer for dark paintwork/colour applications.When painting red tones (e.g. TS-8 Italian Red) to prepare the model with the primer Pink (300087146), this allows the subsequent red tone on the model to shine more strongly and with more depth. Do you want to age the model, weather it or with signs of wear, it is recommended to use the primer oxide red (300087160). If you remove and/or scratch the subsequently applied paint, the effect of rust or rust spots will occur. fallen pieces of paint.Signal word DangerHazard statements:H222 Extremely flammable aerosol.H229 Pressurized container: may burst if heated.H315 Causes skin irritation.H318 Causes serious eye damage.H335 May cause respiratory irritation.H336 May cause drowsiness or dizziness.Safety statementsP102 Keep out of the reach of children.P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211 Do not spray on an open flame or other ignition source.P251 Do not pierce or burn, even after use.P261 Avoid breathing gas/mist/vapors/spray.P271 Use only outdoors or in a well-ventilated area.P280 Wear protective gloves/protective clothing/eye protection/face protection.P302+P352 IF ON SKIN: Wash with acetone and plenty of water.P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.P310 Immediately call a POISON CENTER or doctor/physician.P332+P313 If skin irritation occurs: Get medical advice/attention.P362+P364 Take off contaminated clothing and wash before reuse.P405 Store locked up.P410+412 Protect from sun exposure. Do not expose to temperatures above 50 °C/122 °F.Caution! Not suitable for children under 14 years.

Available immediately, delivery time: 1-4 days

Product number: 8445

Content: 0.18 liters (€66,67 / 1 liter)

12,00 €
Ball bearing set for Tamiya 3-axle trucks, such as the Scania 620
Ball bearing set for Tamiya 3-axle trucks, such as the Scania 620
1 ball bearing set for Tamiya 3-axle trucks, such as Scania620, MAN TGX and Freightliner CASCADIA, Actros 3363, Arocs 3363, Volvo FH16, Scania770, 32 pieces. Contains the following ball bearings: 27 pieces 11x5x4mm (888) 4 pieces 12x6x4mm (890) 1 piece 8x5x2,5mm (891) Suitable and recommended for all Tamiya 3-axle tractors.

Available immediately, delivery time: 1-4 days

Product number: 7312

28,49 €
Tip:
Carson Goldhofer semi-trailer in Tamiya scale
Carson Goldhofer semi-trailer in Tamiya scale
1x Carson Goldhofer semi-trailer in Tamiya scale. Kit with assembly instructions. Includes 2 loading ramps and support legs. Unpainted. Weight approx. 6000g. (907060) Corresponds to the original STN-L3. Steel frame, laser-cut and spot-welded; folding and split loading ramps; 3 axles (ball-bearing) with twin tires and dummy air springs; 12 low-loader tires; 7-chamber taillights (without bulbs); license plate (illuminable); platform with sideboards; milled aluminum underride guard; mechanically adjustable trailer supports; dummy hydraulic cylinder; illustrated assembly instructions; dimensions: 910/1220 x 190 x 142 mm; weight: approx. 6.000 g; suitable lighting circuit boards for the taillights (for 7,2V): item 3104 or 13235

Available immediately, delivery time: 1-4 days

Product number: 6978

475,00 € 585,00 € (18.8% saved)
1 ball head 5x3mm, total length 12mm, brass. M3 thread
1 ball head 5x3mm, total length 12mm, brass. M3 thread
1 ball head 5x3mm, total length 12mm, brass. M3 thread, thread length 5mm. Suitable for 5mm open ball sockets.

Available immediately, delivery time: 1-4 days

Product number: 8095

0,79 € 5,89 € (86.59% saved)
Standard CS-3 servo with JR connector. Dimensions: 38,5 x 19 x 32 mm
Standard CS-3 servo with JR connector. Dimensions: 38,5 x 19 x 32 mm
1x standard servo CS-3 with JR connector. Dimensions: 38,5x19x32mm. 4,8-6V voltage. Actuating torque at 4,8V: 31Ncm. Actuating time approx. 0,17sec./60°. Weight 39 g. Accessories: 2 rudder levers and screws.

Available immediately, delivery time: 1-4 days

Product number: 8851

10,95 € 11,49 € (4.7% saved)
Driver figure kit compatible with Tamiya. Paints and tools not included.
Driver figure kit compatible with Tamiya. Paints and tools not included.
1x driver figure kit suitable for Tamiya. Paints, tools, and glue are not included in the kit.

Available immediately, delivery time: 1-4 days

Product number: 9731

12,00 € 13,49 € (11.05% saved)
1x spray paint tin 100ml, aluminum silver, shiny, TS 17
1x spray paint tin 100ml, aluminum silver, shiny, TS 17
1x spray paint can 100ml, aluminum silver, glossy. TS-17. Acrylic paint spray for plastic, wood, metal, glass and ceramic. This paint spray is very handy and, thanks to its content and size, is suitable for spraying models. As it is made from paint, its drying time is short. The can contains 100 ml. With 2-4 of these cans (depending on the opacity of the paint) a Tamiya truck cab can be painted. Tamiya paint sprays are not attacked by acrylic or enamel paints. After spraying the entire model surface with paint spray, details can be painted with acrylic or enamel paints. By combining three types of paint, colorful paints can be produced easily and reliably.Contents: 100 mlSignal word DangerHazard statements:H222 Extremely flammable aerosol.H229 Pressurized container: may burst if heated.H315 Causes skin irritation.H318 Causes serious eye damage.H335 May cause respiratory irritation.H336 May cause drowsiness or dizziness.EUH066 Repeated exposure may cause skin dryness or cracking.Safety statements:P102 Keep out of reach of childrenP210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211 Do not spray on an open flame or other ignition source.P251 Do not pierce or burn, even after use.P261 Avoid breathing gas/mist/vapours/spray.P271 Use only outdoors or in a well-ventilated area.P280 Wear protective gloves/protective clothing/eye protection/face protectionP302+P352 IF ON SKIN: Wash with plenty of water/acetone.P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.P310 Immediately call a POISON CENTER or doctor/physician.P332+P313 If skin irritation occurs: Get medical advice/attention.P362+P364 Take off contaminated clothing and wash before reuse.P405 Store locked up.P410+412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.Warning! Not suitable for children under 14 years.

Available immediately, delivery time: 1-4 days

Product number: 8576

Content: 0.1 liters (€76,90 / 1 liter)

7,69 €
Off-road tires for Tamiya, hollow, TAM scale 83mm, 1 couple
Off-road tires for Tamiya, hollow, TAM scale 83mm, 1 couple
2 off-road tires for Tamiya, hollow, TAM scale, 83mm outer, 44mm inner, 21mm wide. Inscription FULDA CROSSFORCE 13R22.5. Scope of delivery: 1 pair = 2 pieces. (500907011) Technical specifications: Scale 1:14 Construction: Hollow-chamber tire Outer diameter: 83mm Width: 21mm Inner diameter: 44mm Durable high-performance tire for primarily off-road use. Suitable for the original Tamiya rims. The flexible hollow chamber design achieves optimal traction. Matching front tire: Item 11219 Fulda Variotonn. Matching tire insert 15mm/narrow (2 pieces): Item 11757 Scope of delivery: Fulda Crossforce off-road tire rear (2 pieces)

Available immediately, delivery time: 1-4 days

Product number: 10471

19,90 € 26,49 € (24.88% saved)
6-chamber taillight unit (1 pair) without circuit board. total
6-chamber taillight unit (1 pair) without circuit board. total
6-chamber rear light unit (1 pair) without circuit board. Total width 38mm, 11mm high, 6mm deep. Width of the light unit 26,5mm. (500907038) The base body is chrome-plated on the inside. Matching lighting circuit boards in SMD technology can be found under item number 3233 (for 12V) or 3234 (for 7,2V). When using the lighting circuit boards (not included), the following lighting functions are possible: Tail light Brake light Reversing light Indicator/hazard warning light Fog tail light

Available immediately, delivery time: 1-4 days

Product number: 3134

15,90 € 19,49 € (18.42% saved)
CARSON Reflex Stick Multi Pro LCD 2,4GHz Remote Control
CARSON Reflex Stick Multi Pro LCD 2,4GHz Remote Control
CARSON Reflex Stick Multi Pro LCD 2,4GHz remote control with 14 channels. 14-channel transmitter, 14-channel receiver and manual. With 15 model memories. Reflex Stick Multi Pro LCD - Professional, modern and technically high-quality 14-channel remote control system with 15 model memories for universal use in many RC vehicles and ships. 14 channels can be controlled independently via 2 joysticks and 10 switches (4x buttons / 4x step switches / 2x rotary potentiometers), for example functions such as light / sound, horn, cable winch, support legs, water pump and fire monitor.The REFLEX STICK Multi Pro 14 Channel LCD System is fully compatible with the MFC 01/03 and DMD unit from TAMIYA. Scope of delivery:14 channel 2.4 GHz transmitter, 14 channel 2.4 GHz receiver and multilingual manual.Required accessories:4x Mignon AA cells. Mignon battery set article 9492Recommended accessories:500503060 Reflex 6 / 14Ch Switch 2 (2x2.5A, max. 16V)500503061 Reflex 6 / 14Ch Switch 4 (4x2.5A, max. 16V)500503062 Reflex Switch 2/4 power distributor500606073 Plug-in charger (item 10723)Transmitter charging cable: item 9673500501544 Receiver500609042 Mignon battery set (AA)Technical data:- Operating voltage transmitter 4,8 - 6 V (4 AA cells)- 2.4G FHSS system (Frequency HoppingSpread Spectrum)- 2.4G servo reverse (reversal of the direction of rotation) and trim function for channels- 4x buttons ON/OFF/ON, 4x switches ON/OFF/ON, 2x rotary potentiometers- Power supply for the receiver 4,8 - 6 V- Plug system Graupner J/R- Dual Rate channel 1-4 (servo travel limitation)- EPA channel 1-4 (servo travel limitation)- ABS function channel 1-4 (Stutter brake)- EXP function channel 1-4 (exponential)Technical details:- 14 controllable channels- 15 model memories- Includes charging socket- 100% compatible with TAMIYA MFC 01/03 and DMD unit- Blue illuminated LC displayIt is not possible to bind several receivers at the same time with this system.Receivers that can be used with this system:Article 11259, 4-channel receiverArticle 12422, 4-channel receiver, waterproofArticle 12421, 5-channel receiverArticle 12420, 5-channel receiver, waterproof

Available immediately, delivery time: 1-4 days

Product number: 10326

125,00 € 159,99 € (21.87% saved)
Driver figure ROBERT. With overalls, cap, and boots
Driver figure ROBERT. With overalls, cap, and boots
1x Driver Figure Robert. With overalls, cap, and boots. Figure is not poseable. Scale 1:14. Total height (seated) approx. 110 mm. Height from seat (buttocks) to head approx. 65 mm. Required seat area approx. 40 x 35 mm (width x depth). Weight approx. 70 g.

Available immediately, delivery time: 1-4 days

Product number: 9918

9,98 € 9,99 € (0.1% saved)
Spray primer 180ml, fine light grey. Good coverage primer.
Spray primer 180ml, fine light grey. Good coverage primer.
1x spray primer 180ml, fine light grey. Good covering primer for plastic and metal. Spray can with spray head, 180ml capacity. 87064/XNUMX RC Crawler Car XNUMXGhz XNUMXWD Off-Road Vehicle. Superfine spray primer - the first step to perfect painting. High coverage and adhesion without covering the model details. The primer evens out light scratches and unevenness. This is available in different container sizes (100ml/180ml) and colors.The primers are suitable for the following surfaces/materials: plastic (ABS, polystyrene (PS)), metal (steel, aluminum, die-cast (zinc die-cast)), wood, ceramic.The primed surface can also be wet-coated or painted before the paint is applied. be sanded. For this purpose we recommend TAMIYA sandpaper and sanding sponges, which can be used dry and wet and are available in grits from 320 to 3.200. TIP: Basics for selecting primers: White primers are ideal for light paint/varnish applications and light grey or dark grey colours. Grey primer for dark paintwork/colour applications.When painting red tones (e.g. TS-8 Italian Red) to prepare the model with the primer Pink (300087146), this allows the subsequent red tone on the model to shine more strongly and with more depth. Do you want to age the model, weather it or with signs of wear, it is recommended to use the primer oxide red (300087160). If you remove and/or scratch the subsequently applied paint, the effect of rust or rust spots will occur. fallen pieces of paint.Signal word DangerHazard statements:H222 Extremely flammable aerosol.H229 Pressurized container: may burst if heated.H315 Causes skin irritation.H318 Causes serious eye damage.H335 May cause respiratory irritation.H336 May cause drowsiness or dizziness.Safety statementsP102 Keep out of the reach of children.P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211 Do not spray on an open flame or other ignition source.P251 Do not pierce or burn, even after use.P261 Avoid breathing gas/mist/vapors/spray.P271 Use only outdoors or in a well-ventilated area.P280 Wear protective gloves/protective clothing/eye protection/face protection.P302+P352 IF ON SKIN: Wash with acetone and plenty of water.P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.P310 Immediately call a POISON CENTER or doctor/physician.P332+P313 If skin irritation occurs: Get medical advice/attention.P362+P364 Take off contaminated clothing and wash before reuse.P405 Store locked up.P410+412 Protect from sun exposure. Do not expose to temperatures above 50 °C/122 °F.Caution! Not suitable for children under 14 years.

Available immediately, delivery time: 1-4 days

Product number: 8658

Content: 0.18 liters (€61,00 / 1 liter)

10,98 € 14,79 € (25.76% saved)
Drive tire for Tamiya, hollow, TAM scale 82mm, 1 piece
Drive tire for Tamiya, hollow, TAM scale 82mm, 1 piece
1 drive tire for Tamiya, hollow, TAM scale, 82mm outer diameter, 44mm inner diameter, 21mm wide. Labeled: FULDA ECOCONTROL 315/80R22.5 (500907014). Bulk prices: (only taken into account when placing an order) 5 pieces or more: €10,70 each; 10 pieces or more: €10,40 each. This item has been replaced by item 11369!

Available immediately, delivery time: 1-4 days

Product number: 6359

Ab 10,40 €
Details
Bellows, hard (as dummy air suspension). Made of rubber,
Bellows, hard (as dummy air suspension). Made of rubber,
Air bellows, hard, (as air suspension dummy). Made of rubber, suitable for heavy models. (2 pieces). Height 21mm, diameter 20mm. 500907358

Available immediately, delivery time: 1-4 days

Product number: 5236

6,09 € 6,99 € (12.88% saved)
1 set of roof lamp boards for 7,2-12V. With angel eyes
1 set of roof lamp boards for 7,2-12V. With angel eyes
1 set of roof lamp circuit boards for 7,2-12V. With blue/white angel eyes effect. With SMD LEDs and series resistor.Set = 2 pieces. Longer wire = positive pole! 500907554 Scope of delivery:2 circuit boards with blue and white SMD LEDs and SMD resistors.Circuit board diameter: 8,5mm1 Zener diode 5,1V (this is only required for 12V operation!)2 chrome-plated reflectors, suitable for roof lamps and lamp brackets. InstructionsBlue angel eye effect (parking light) and white high beam light.Suitable for the articles:2502, 3246, 3819, 6361, 3818, 4004, 5235.

Available immediately, delivery time: 1-4 days

Product number: 7910

32,99 €
Tamiya S-parts disc set MB Arocs / 56352
Tamiya S-parts disc set MB Arocs / 56352
S-parts window set for Mercedes-Benz Arocs 3363 6x4, ClassicSpace 1/14 56352, Arocs 4151. 319115460. Contains sun visor, windshield, side windows. Window set suitable for the Tamiya models: Arocs 3363 6x4>/li> Arocs 3348 6x4 rear tipper Arocs 4151 8x4 rear tipper

Available immediately, delivery time: 1-4 days

Product number: 10539

12,19 € 14,99 € (18.68% saved)
Plastic cab suitable for SCANIAs from Tamiya
Plastic cab suitable for SCANIAs from Tamiya
1 plastic driver's cab suitable for SCANIAs from Tamiya. Unpainted. 309335474. The driver's cab fits the following Tamiya models: -Scania R470 4x2 -Scania R630 6x4

Available immediately, delivery time: 1-4 days

Product number: 9033

36,59 €
Seat with seat console, plastic, dark grey. Seat
Seat with seat console, plastic, dark grey. Seat
1 seat with seat console, plastic, dark gray. Seat area approximately 35x34mm. The seat is delivered in 3 parts. Height 65mm. (500907359). Suitable for Tamiya scale.

Available immediately, delivery time: 1-4 days

Product number: 5603

7,59 € 8,49 € (10.6% saved)
CS-9 MG power servo with JR connector. Dimensions: 40x20x38mm
CS-9 MG power servo with JR connector. Dimensions: 40x20x38mm
1x power servo CS-9 MG with JR connector. Dimensions: 40x20x38mm. 4,8-6V voltage. Actuating torque at 4,8V: 85Ncm. Actuating time approx. 0,1sec./60°. Weight 50 g. Accessories: 2 rudder levers and screws. This powerful servo is equipped with ball bearings and metal gears. It is also splash-proof and is therefore ideal as a steering servo in vehicles that sometimes move in damp environments!

No longer available

Product number: 7939

27,99 € 29,99 € (6.67% saved)
Details
1 piece work light, approx. 11mm diameter, total height
1 piece work light, approx. 11mm diameter, total height
1 piece work light, approx. 11mm diameter, total height approx. 23mm, adjustable with base, (500907576). Due to the small housing, only small lighting fixtures are suitable for lighting, such as SMD LEDs: Article 6340, 6342.

Available immediately, delivery time: 1-4 days

Product number: 3249

6,30 € 6,99 € (9.87% saved)
1 molding parts kit S-parts clear. For Scania Tamiya
1 molding parts kit S-parts clear. For Scania Tamiya
1 injection molded parts set S-parts, for Scania from Tamiya. Transparent, slightly grey colored. 309115185. This parts set fits the following Famiya models:-Scania R470-Scania R620The injection molded part contains the parts:Windscreen2x side windowsSun visor

Available immediately, delivery time: 1-4 days

Product number: 8979

12,00 € 16,49 € (27.23% saved)
1 engine f. Tilting drive (spindle motor) 6V (3-9V) 300U / min
1 engine f. Tilting drive (spindle motor) 6V (3-9V) 300U / min
1 motor for tilt drive (spindle motor) 6V (3-9V) 300rpm. Idle 500mA. Current max. 2A. Reduction ratio 50:1. 125 gr. (shipping weight 155gr.). 907066. Diameter 27,5mm/33mm (motor/gearbox). Shaft diameter 5mm flattened to 4mm. Shaft 12mm long.Motor length: 38/44mm (without/with connections)Gearbox length: 20mm.Recommended motor for the tilt spindle item 4099!Suitable as a drive for the mast double spindle of the crawler loader LR634, Carson, item 7575.You can find a suitable universal motor mount for this gear motor under item number 10697.Technical specifications:Nominal voltage: 6V DCWorking voltage: 3-9V DCIdle speed: 300rpmIdle current: 500mASpeed ​​in continuous operation: 270rpmContinuous current: 2AContinuous torque: 200mNmPeak torque: 600mNmReduction ratio: 50:1Weight: 125gr.

Available immediately, delivery time: 1-4 days

Product number: 4218

52,90 € 55,99 € (5.52% saved)
1 set of injection molded parts, AA parts, clear. For ACTROS from
1 set of injection molded parts, AA parts, clear. For ACTROS from
1 injection molded parts set AA parts, clear. For ACTROS from Tamiya. 319000498. Suitable for Actros Gigaspace 1851 and 3363 The injection molded part contains the parts: All headlight lenses

Available immediately, delivery time: 1-4 days

Product number: 8381

9,19 € 11,99 € (23.35% saved)
driven front axle with self-locking differential
driven front axle with self-locking differential
1x driven front axle with self-locking differential with/without through-drive. Tamiya scale. Officially licensed by ZF Friedrichshafen AG. 500907267. The CARSON drive concept for TAMIYA trucks in 1:14 scale. Convert your TAMIYA 2- or 3-axle TAMIYA tractor into an all-round all-wheel drive vehicle with our self-locking axles. The components can be easily replaced as they are attached to the existing mounting points. A huge advantage of these axles is that no additional space is needed for a switching servo (linkages and Bowden cables), as they lock independently/automatically in the event of a loss of traction. Officially licensed by ZF Friedrichshafen AG.You decide how you want to convert your 2- or 3-axle tractor - this is possible in two stages:Configuration options for:2-axle tractors:Mercedes-Benz Actros Gigaspace 1845, MAN TGX 18.540, SCANIA R470, VOLVO FH12, Mercedes-Benz 1838LS, Mercedes-Benz 18501: 4x2 rear axle drive (with self-locking differential)- TAMIYA 3-speed manual transmission (modular kit) with a CARSON rear axle (self-locking)2: 4x4 all-wheel drive with 2+2 speed transmission (front axle/rear axle/transfer case self-locking)- CARSON 2-speed manual transmission Compact in conjunction with the CARSON 2-speed transfer case torque compensation (self-locking), driven front axle (self-locking), rear axle (self-locking), drive shaft set 4x4.3-axle tractor: Mercedes-Benz Actros 3363, Arocs 3363, MAN TGX 26.540, SCANIA R620)1: 6x4 rear axle drive (with self-locking differential)- TAMIYA 3-speed manual transmission (modular system) with two CARSON rear axles (self-locking), drive shaft set 6x4.2: 6x6 all-wheel drive with 2+2 speed transmission (front axle/rear axle/transfer case self-locking)- CARSON 2-speed manual transmission Compact in conjunction with the CARSON 2-speed transfer case torque compensation (self-locking), driven front axle (self-locking), two rear axles (self-locking), drive shaft set 6x6. CARSON front axle with self-locking differential: Detailed driven front axle for TAMIYA model trucks in 1:14 scale. The axle is equipped with a self-locking differential and can be built with or without a through drive; both shafts and housing covers are included in the scope of delivery. If traction is lost, the differential locks automatically and generates 100% traction. A big advantage of this drive axle is that NO shift servos, Bowden cables and linkages are required for the differential locks, which also benefits the clarity and space available in the chassis. The axle components are housed in a heavy-duty reinforced plastic axle housing and are ideally equipped for any construction site use. To convert 2- and 3-axle tractors, the 2-speed manual transmission, the 2-speed transfer case, a driven front axle, one or two rear axles and the respective drive shaft set 4x4 or 6x6 are required. - Front axle faithfully reproduced - Reinforced plastic axle housing - CNC-milled aluminum steering knuckle/steering lever - High ground clearance thanks to a slim differential housing (height 33 mm) - 16-fold ball bearing - Self-locking differential (shift servo, linkages and Bowden cables are not required) - Hardened steel bevel gears - Axle ratio 1:2,66 - Maximum steering angle 42° - 5 mm gearbox/input shaft - Aluminum rim driver 12 mm Hexagon- Easy conversion to axle with and without through drive (both shafts and housing cover are included in the kit)- Dimensions front axle LxWxH: 44 x 160 x 33 mm- Weight approx. 175 g- Matching aluminum rims (front drive) Art. No. 500907272 (item 10039) 10-hole design narrow version and 500907278 (item 10042) 10-hole design wide version 12mm hexagon driver.- Incl. Tie rod - The installation kit (500907280) is required for mounting the AG front axle (item 10037). - Officially licensed by ZF Friedrichshafen AG. Since this axle has the same gear ratio as the Tamiya kit differentials (rear axles), this driven front axle can also be combined with the kit axles.

Available immediately, delivery time: 1-4 days

Product number: 10032

199,00 € 235,00 € (15.32% saved)
Tip:
Tamiya Mercedes-Benz Arocs 3363 6 ClassicSpace 4x56352
Tamiya Mercedes-Benz Arocs 3363 6 ClassicSpace 4x56352
Tamiya Mercedes Benz Arocs 3363 ClassicSpace 6x4. 300056352 kit. Unpainted. Cabin length: 141mm. NEW Toy Fair 2017 Complete kit for building a working model. To fully complete the model as a driving model, the following are also required:Paint(s), drive battery, RC components (remote control, servos, etc.)The truck kit contains:Pre-drilled and threaded frame componentsAll parts for 2 driven axles with differential1 non-driven steering axleLeaf spring packages for all axles. Rims and tiresUnpainted plastic cab. Plastic fendersUnpainted plastic parts for attachment to the driver's cabWindows, mirrors, windshield wipers and other attachmentsTrue-to-original interior fittingsFunctional fifth wheel couplingHeadlights, indicators, tail light units - without lighting fixtures. Sun visor, signal horns, switchable 3-speed gearbox (kit), cardan shaft. Electric motor (7,2V)Plastic parts for servo mounts, battery compartmentAll necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, stickers, etc.Richly illustrated, comprehensive assembly instructionsRecommended accessories:Remote control REFLEX-Stick Multi Pro 14 (item 9494).Multifunctional unit MFC-03 for lighting, sound, speed controller. Article 8484. Technical data: Scale: 1:14 Cab length: 141 mm Length: 538 mm Arocs 3363, the workhorse as a truck model. This truck, with its exceptional design and impressive performance data, is now also available as an RC model. The Tamiya Arocs 3363 was the highlight of the 2017 Nuremberg Toy Fair. The model, manufactured in 1:14 scale, has a high deadweight and can be coupled to both Tamiya and Carson trailers via its fifth wheel.A kit that is impressiveThis truck kit is equipped with proven Tamiya technology and has the best values ​​in terms of flexibility and stability thanks to the ladder frame or chassis made of aluminum. The radiator grille in excavator tooth look and the headlights protected by sturdy grilles indicate the hard work of the original on the construction site. Tamiya, the manufacturer already known for its Actros Gigaspace models, has succeeded in creating another high-quality and impressive RC model with the replica of the Mercedes-Benz Arocs 3363 6X4 M-Cab Classic Space. The body is made of high-quality ABS plastic, the interior is excellently reproduced and the driver's cabin can be folded forward just like the original. The coil spring damping and the leaf springs ensure realistic driving behavior.Accessories and extensionsIf the kit is additionally equipped with the multifunctional module MFC-03, the realistic light and sound functions of the Arocs can also be reproduced. To control the model, a remote control unit with at least 4 channels is required. A 7,2V drive battery and a steering servo are also required for driving.Are you looking for a stable and functional storage or transport box? Please see the relevant items 12198 or 12197.

Available immediately, delivery time: 1-4 days

Product number: 10318

389,00 € 465,00 € (16.34% saved)
Road tires for Tamiya, hollow, TAM scale 83mm (2 pieces)
Road tires for Tamiya, hollow, TAM scale 83mm (2 pieces)
2 road tires for Tamiya, hollow, TAM scale 83mm outside, 44mm inside, 21mm wide. Marking 11.00x22.5. 309805456. Standard kit tires. 300056527. These tires fit the following Tamiya models:-Rungenteleskop-Semi-trailer-Flatbed-Semi-trailer-Tank-Semi-trailer-Box-Semi-trailer-Mercedes-Benz 1838LS-Mercedes-Benz 1850L-Mercedes-Benz Actros 1851 Gigaspace -Mercedes-Benz Actros 3363 (rear only)-Mercedes-Benz Arocs 3363 6x4-Scania R470 Highline-Scania R620 Highline-MAN TGX 26.540 6x4 XLX-MAN TGX 18.540 4x2 XLX-Volvo FH12 Globetrotter-Aeromax-King Hauler-Knight Hauler-Globe Liner-Freightliner Cascada Evolution-Grand HaulerMatching rims: Article 4540, 7138, 4539, 7574, 4443, 4442

Available immediately, delivery time: 1-4 days

Product number: 8370

12,00 € 12,19 € (1.56% saved)
Low-loader tire, 4 piece, solid rubber, 59x29x16mm (outside)
Low-loader tire, 4 piece, solid rubber, 59x29x16mm (outside)
Low loader tires, 4 pieces, solid rubber, 59 x 29 x 16mm (outside x inside x wide) Fulda Ecotonn 245/70 R 17.5. Delivery includes 4 pieces! (500907583). Matching rims: made of plastic: items 1911, 3821, 4365, 5113, 8544, 8864, 12220. made of aluminum: items 7978, 8198, 8822.

Available immediately, delivery time: 1-4 days

Product number: 10496

23,99 € 26,49 € (9.44% saved)
Studs conversion kit for Tamiya 1-front axle. Significant
Studs conversion kit for Tamiya 1-front axle. Significant
Wheel bolt conversion kit for 1 Tamiya front axle. Significant reduction in play compared to the kit bolts. Steel. (500907091).

Available immediately, delivery time: 1-4 days

Product number: 5620

15,99 € 18,29 € (12.58% saved)
1x spray paint tin 100ml, white, shiny, TS 26
1x spray paint tin 100ml, white, shiny, TS 26
1x spray paint can 100ml, white, glossy. TS-26. Acrylic paint spray for plastic, wood, metal, glass and ceramic. This paint spray is very handy and, thanks to its content and size, is suitable for spraying models. As it is made from paint, its drying time is short. The can contains 100 ml. With 2-4 of these cans (depending on the opacity of the paint) a Tamiya truck cab can be painted. Tamiya paint sprays are not affected by acrylic or enamel paints. After spraying the entire model surface with paint spray, details can be painted with acrylic or enamel paints. By combining three types of paint, colorful paints can be produced easily and reliably.Contents: 100 mlSignal word DangerHazard statements:H222 Extremely flammable aerosol.H229 Pressurized container: may burst if heated.H315 Causes skin irritation.H318 Causes serious eye damage.H335 May cause respiratory irritation.H336 May cause drowsiness or dizziness.EUH066 Repeated exposure may cause skin dryness or cracking.Safety statements:P102 Keep out of reach of childrenP210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211 Do not spray on an open flame or other ignition source.P251 Do not pierce or burn, even after use.P261 Avoid breathing gas/mist/vapours/spray.P271 Use only outdoors or in a well-ventilated area.P280 Wear protective gloves/protective clothing/eye protection/face protectionP302+P352 IF ON SKIN: Wash with plenty of water/acetone.P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.P310 Immediately call a POISON CENTER or doctor/physician.P332+P313 If skin irritation occurs: Get medical advice/attention.P362+P364 Take off contaminated clothing and wash before reuse.P405 Store locked up.P410+412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.Warning! Not suitable for children under 14 years.

Available immediately, delivery time: 1-4 days

Product number: 8585

Content: 0.1 liters (€79,80 / 1 liter)

7,98 €
1 Kugellagersatz for Tamiya-3-axle trucks as Scania620,
1 Kugellagersatz for Tamiya-3-axle trucks as Scania620,
1 ball bearing set for Tamiya 3-axle trucks. 30 pieces. Contains the following ball bearings:26 pieces 11x5x4mm4 pieces 12x6x4mmSuitable and recommended for all Tamiya 3-axle tractors.For MAN TGX, Cascadia there is another set: Article 7312.Particularly suitable for:-Tamiya KingHauler-Tamiya GlobeLiner-Tamiya Ford Aeromax-Tamiya Knight Hauler-Tamiya Knight Hauler Chrome Edition

Available immediately, delivery time: 1-4 days

Product number: 9707

23,99 € 30,99 € (22.59% saved)
Injection molded parts kit BB parts, red-clear for ACTROS by Tami
Injection molded parts kit BB parts, red-clear for ACTROS by Tami
1 injection-molded parts set BB parts, red-clear for ACTROS from Tamiya. Lamp lenses for rear light 319000499 Actros 1851 4x2 and Actros 3363 6x4 Suitable for the Tamiya models: Actros 1851 GigaSpace Actros 3363 6x4 GigaSpace Arocs 3363 6x4 ClassicSpace Arocs 3348 6x4 rear tipper Arocs 4151 8x4 rear tipper

Available immediately, delivery time: 1-4 days

Product number: 8389

8,19 € 10,99 € (25.48% saved)
Trailer support pair (Carson FLIEGL trough trailer)
Trailer support pair (Carson FLIEGL trough trailer)
1 pair of trailer support legs (Carson FLIEGL tipper trailers). 1 pair, metal. Aluminum housing, steel support with guide, INCLUDING 2 MOTORS, support plates. Overall height 76-114mm. (907218). This set contains the supports (item 8537) and 2 matching motors (item 8538) for the Fliegl trailer. The motors are designed for operation at 7,2V. This set fits almost all Carson trailer chassis (except Goldhofer trailers).

Ready to ship in 5 days, delivery time 1-4 days

Product number: 8890

159,00 € 199,98 € (20.49% saved)
Hexagon drivers (1 pair) with internal teeth,
Hexagon drivers (1 pair) with internal teeth,
Hexagon driver (1 pair) with internal teeth, wrench size 12mm. Height 6mm. Aluminum. For Tamiya drive axles. Supplied in 2 pieces = 1 pair.

Available immediately, delivery time: 1-4 days

Product number: 6550

5,39 € 6,19 € (12.92% saved)
1 molding parts kit S-parts clear. For MANs of Tamiya
1 molding parts kit S-parts clear. For MANs of Tamiya
1 injection molded parts set S-parts, clear. For MANs from Tamiya. 319115281. (new version). This parts set fits the following Tamiya models:-MAN TGX 18.540 4x2 XLX-MAN TGX 26.540 6x4 XLXThe injection molded branch contains the parts:Windscreen2x side window door2x side windowSun visorInsert radiator grille

Available immediately, delivery time: 1-4 days

Product number: 8705

12,19 € 16,79 € (27.4% saved)
Injection molded parts set T-parts, clear. For Scania from Tamiya
Injection molded parts set T-parts, clear. For Scania from Tamiya
1 injection molded parts set T-parts, clear. For Scania from Tamiya. 309225094. This parts set fits the following Tamiya models:-Scania R470-Scania R620The injection molded part contains the parts:All headlight lenses

Available immediately, delivery time: 1-4 days

Product number: 8980

7,29 € 10,79 € (32.44% saved)
Carson 1:14 tire insert 15mm
Carson 1:14 tire insert 15mm
1:14 tire insert 15mm. 2 pieces. Suitable for standard tires. This is a tire insert (medium strength) made of cellular rubber, which keeps the truck tire in shape and provides additional stability. Depending on the load, the better flex behavior on the road and on the off-road course is noticeable through higher traction. Can be used for all TAMIYA tractors, semitrailers and trailers with narrow tires. Width of the tire insert: 15 mm Scope of delivery: 2 tire inserts Suitable for the following tires: - TAMIYA modular tires - narrow version: 8370 CARSON tires - wide version: 10471, 11369.

Available immediately, delivery time: 1-4 days

Product number: 11757

11,00 € 11,49 € (4.26% saved)
1x Tamiya MFC-03 multifunction unit
1x Tamiya MFC-03 multifunction unit
1x Tamiya MFC-03 multi-function unit for tractors. Includes 33 realistic sound, light and function options for tractors in Tamiya scale. (56523) EURO-Style!Functional range:Sounds:Acoustic signal, engine start, idling, parking brake, driving with/without trailer, coupling, uncoupling, gear shifting noises, air pressure brake, brake bleeding, brake, horn (short and long), indicators, hazard lights, reversing, air release, switching off the engine, warning when the battery power is running low.Light:Position light (parking light), headlights, fog lights, additional roof lamps, gear indicator (only above roof lamps), indicators, hazard lights, brake light, reversing light.Additional functions:Electronic speed controller with sensitive control and brake, vibration function (shaking of the driver's cab), control of the support device.Scope of delivery:Speaker, resonance body, LEDs, cable, vibration module, central control unit, instructions.Useful accessories:If the light functions (or additional servo functions) are to be transmitted to the trailer/semi-trailer without a cable connection, numerous Infrared transmission modules are available. Here is a selection: IR transmitter AIRU from Servonaut: Article 5087IR receiver and trailer module AMO from Servonaut: Article 5086 IR transmitter especially for MFC-xx: Article 7920, 11178IR receiver for the above transmitter: Article 7921, 11176, 11177

Available immediately, delivery time: 1-4 days

Product number: 8484

329,00 € 415,00 € (20.72% saved)