Rims / Hubs

Alcoa rim for wide tires for front axle, aluminum, 10 holes

1x Alcoa rim for wide tires for front axle, aluminum, 10 holes 2mm, for Tam size core hole diameter 18mm. (14115). Bolt circle diameter 25mm. Round hole motif For use with Tamiya front axles, we recommend item 4445 as a rim adapter. You will also need 10 screws (ideally hexagon head screws). (e.g. item 3531). Dimensions: Outside diameter (horn): 47mm Outside diameter of tire seat: 44,8mm Width: 24mm Core hole: 18mm Fastening holes: 10x 2mm on bolt circle 25mm Outside holes: 10x 3mm If the self-locking front axles (item 10032) from Carson are used, the rim adapters with item number 10438 are recommended. In addition, item 10439 is available as a spacer ring - this allows the track width to be increased by 2mm at a time. If LESU steering axles (driven) are used, item 12909 is the suitable adapter. Item 4442 is available as an all-round rim with a matching design. Hexagon model screws are suitable as rim screws (e.g. item 6). Alternatively, combinations of stud bolts and cap nuts can also be used. (e.g. item 3531).

Available immediately, delivery time: 1-4 days

Product number: 4441

€ 16,90 *

Subscriptions

Alcoa rim for all-round tires, aluminum, 10 holes 2mm, for

Alcoa rim for all-round tires, aluminum, 10 holes 2mm, for Tamiya size. Core hole diameter 18mm. Width 20mm, bolt circle diameter 25mm. (14900). Outside diameter 47mm. For use with Tamiya drive axles, we recommend item 4447 as a rim adapter. In addition, 10 screws (ideally hexagon head screws) are required. (e.g. item 3531/2930). When using LESU drive axles, adapter 12910 is available. Item 4441 is available as a wide rim with an identical design. These rims are also used as double rims on the drive axle. For this, 2 rims are attached to the axle in mirror image. Depending on your own taste, the gap between the double tires can be increased by using the spacer ring 10439. However, longer screws or studs must then be used.

Available immediately, delivery time: 1-4 days

Product number: 4442

€ 16,49 *

Subscriptions

Alcoa crossbar rim for trailer axle Alu, 10 holes 2mm,

Alcoa center rim for trailer axle aluminum, 10 holes 2mm, for Tamiya size. Core hole diameter 18mm. (14117). Bolt circle diameter 25mm. Width: 24mmOuter diameter: 45mmOuter diameter at rim flange: 47,5mmFor use with 4mm trailer axles we recommend item 4446 as a rim adapter. In addition, 10 screws (ideally hexagon head screws) are required. (e.g. item 3531).These rim adapters are preferably used for this:Item 12903Item 4554Item 4552Item 4553Item 4555Please note:The rims have 2mm mounting holes. The rim adapters 4552-4555 have holes for M1,6 threads.

Available immediately, delivery time: 1-4 days

Product number: 4444

€ 16,90 *

Subscriptions

1x spacer aluminum suitable for hubs and rims with 25mm

1x aluminum spacer ring suitable for hubs and rims with 25mm bolt circle. Thickness 1mm. 10 holes 1,7mm on 25mm bolt circle. Also suitable for wheel spacers. When used in pairs with the hubs (item 10438), the wheel space can be widened by 2mm.

Available immediately, delivery time: 1-4 days

Product number: 10439

€ 4,94 *

Subscriptions

Rear hub with lid, aluminum, PCD 25mm, 10x

Rear wheel hub with cover, aluminum, bolt circle 25mm, 10x M1,6 thread. For RÜST rims. With aluminum hub cap, O-ring. Tamiya size (14010). Outer diameter of the hub cap: 17,8mm. These adapters fit all original Tamiya drive axles (those with the SW12 hexagon socket). The adapters also fit the self-locking drive axle from Carson (item 10031).

Available immediately, delivery time: 1-4 days

Product number: 4447

€ 18,49 *

Subscriptions

Rear hub with lid, aluminum, PCD 25mm, 10x

Available immediately, delivery time: 1-4 days

Product number: 12904

€ 18,49 *

Subscriptions

RÜST nut protection rings (1 pair), aluminum also for widening

Ruest maternity rings (1 pair), Alu also Spurverbreiterung.Tamiya size. Thickness 3,5mm. Diameter 32 / 18,2mm. For pitch circle diameter 25mm (14300).

Available immediately, delivery time: 1-4 days

Product number: 6389

€ 13,99 *

Subscriptions

RÜST nut protection rings (1 pair) in all-wheel design aluminum

RÜST nut protection rings (1 pair) in all-wheel design aluminum. Tamiya size. Thickness 3,5mm. Diameter 32mm. Suitable for bolt circle 25mm. (14350).

Available immediately, delivery time: 1-4 days

Product number: 12905

€ 18,97 *

Subscriptions

Aluminum hub suitable for driven steering axles with SW12 6-ka

1x aluminum hub suitable for driven steering axles with hexagon SW12. For use with rims with 25mm bolt circle! With 1 hub cap (aluminum) with O-ring fastening. 1 hubs are required for 2 axle. Suitable for the driven steering axles from LESU. Matching narrow rims with round hole motif (not included) article 4442. Outer diameter: 29,7mm Bolt circle diameter: 25mm with 10x M1,6 thread Outer diameter of hub shoulder: 18mm Drive: via hexagon socket to match the hexagon socket SW12 Central bore: 4mm With article 10439 (not included) the track width can be widened by 2mm each (when using 1 spacer ring per side). The use of VA hexagon screws (article 6) is recommended.

Available immediately, delivery time: 1-4 days

Product number: 12910

€ 16,90 *

Subscriptions

Trailer hub with cover, aluminum, bolt circle 25mm, 10x 1,6mm

Trailer hub with cover, aluminum, bolt circle 25mm, 10x M1,6 thread. For Tamiya size for hexagon socket SW6. (12). This trailer hub fits perfectly with the Alcoa center rim for trailer axle (item 14001).

Available immediately, delivery time: 1-4 days

Product number: 12903

€ 16,90 *

Subscriptions

Aluminum hub suitable for Carson powered steering axle

1x aluminum hub suitable for driven steering axles with hexagon SW12. For use with rims with 25mm bolt circle! With 1 hub cap (aluminum) with O-ring fastening. 1 hubs are required for 2 axle.Suitable for the driven, self-locking axles (item 10032).Matching wide rims with round hole motif (not included) item 4441.Outer diameter: 29,7mmBolt circle diameter: 25mm with 10x M1,6 threadOuter diameter of hub shoulder: 18mmDrive: via hexagon socket to match the hexagon socket SW12Central bore: 4mmWith item 10439 (not included) the track width can be widened by 2mm each (when using 1 spacer ring per side).The use of VA hexagon screws (item 6) is recommended.

Available immediately, delivery time: 1-4 days

Product number: 12906

€ 16,90 *

Subscriptions

Aluminum hub suitable for driven steering axle with SW12 6-kan

1x aluminum hub suitable for driven steering axles with hexagon SW12. For use with rims with 25mm bolt circle! With 1 hub cap (aluminum) with O-ring fastening. 1 hubs are required for 2 axle. Suitable for the driven, LESU steering axles. Matching wide rims with round hole motif (not included) article 4441. Outer diameter: 29,7mm Bolt circle diameter: 25mm with 10x M1,6 thread Outer diameter of hub shoulder: 18mm Drive: via hexagon socket to match the hexagon socket SW12 Central bore: 4mm With article 10439 (not included) the track width can be widened by 2mm each (when using 1 spacer ring per side). The use of VA hexagon screws (article 6) is recommended.

Available immediately, delivery time: 1-4 days

Product number: 12909

€ 16,90 *

Subscriptions

Aluminum hub suitable for driven steering axles with SW12 6-ka

1x aluminum hub suitable for driven steering axles with hexagon SW12. For use with rims with 25mm bolt circle! With 1 hub cap (aluminum) with O-ring fastening. 1 hubs are required for 2 axle.Suitable for the driven, self-locking axles (item 10032).Matching narrow rims with round hole motif (not included) item 4442.Outer diameter: 29,7mmBolt circle diameter: 25mm with 10x M1,6 threadOuter diameter of hub shoulder: 18mmDrive: via hexagon socket to match the hexagon socket SW12Central bore: 4mmWith item 10439 (not included) the track width can be widened by 2mm each (when using 1 spacer ring per side).The use of VA hexagon screws (item 6) is recommended.

Available immediately, delivery time: 1-4 days

Product number: 12908

€ 16,90 *

Subscriptions