1 shackle approx. 8,6x5,6mm, with threaded bolt M1. Brass. 1 piece! Inner dimensions: 2,8x5mm. Thread: M1Shackle thickness: 1mm

Turnbuckle brass, 2 piece, with right and left thread. M2x18. Length 26-40mm. Diameter 3,0mm. Length middle part 18mm m. Cross hole for toggle.

Turnbuckle brass, 2 piece, with right and left thread. M1x8. Length 12-18mm. Diameter 1,8mm. Length middle part 8mm with transverse hole for toggle.

2 piece of halogen ceiling spotlight, 14x10mm. Plastic, housing with lens Pears 6V / 100mA.

Turnbuckle brass, 2 pieces, with right and left thread. M1,4x9. Length 15-21mm. Diameter 2,2mm. Length of middle part 8mm with cross hole for toggle. Hole in the anchorage eyes: 1,2mm

Light bulbs, clear, 6V, 2,3mm diameter, 50mA, 10cm strand length. White connecting strands. 2 piece.

Searchlight (2 pieces), 10,5 mm diameter, chrome-plated plastic, fixed, housing with base, light discs, bulbs total height approx. 15 mm. 2x searchlight 10,5 mm 6 V. Fixed spotlight with glass disc, bright bulb 6 V/100 mA. Technical data: Diameter 10,5 mm, height 15 mm, operating voltage 6 volts, current 100 mA, wire length approx. 100 mm

Searchlight (1 piece), 15mm diameter, plastic, chrome-plated, swivelling, housing and holder, lens, bulb 6V. 1x searchlight 15 mm 6V. 2-way movable spotlight (swivelling and rotating) with glass lens and bright bulb 6V/100mA. Technical data: Diameter 15mm Height 24mm Operating voltage 6 volts Current 100 mA Wire length approx. 100mm  

1x screw lock, medium strength, 10ml.

Servo tester KM8008. Useful tool for testing and setting servos. Also ideal for finding the neutral position. This servo tester is a useful tool for testing servos. Also ideal for finding the neutral position before installation.Functions:1. Manually checking the travel and direction of rotation of servos2. Servo test automatic function3. Determining the neutral position of servosTechnical data:Output voltage 5V factory settingInput voltage 6 V - 24 V (centre contact is the PLUS pole)No-load current 15 mADimensions approx. 50 x 40 x 24 mmWeight approx. 35 gIn manual mode (displayed via LED) the servo is controlled with the rotary potentiometer. In automatic mode the servo's setting speed is set.

Yellow light (1 piece), 7mm diameter, 13mm height. Plastic, orange cover, aluminum base. 1 bulb 6V/50mA. White connecting wires, approx. 100mm long. Total height: 19mm.

Shackle approx. 7x4mm, bolt diameter approx. 1mm, brass. 2 pieces. 2 small and precise shackles with functioning thread made of brass.Packaging content: 2 pieces. Height: 7mm Width: 4mm Thread: M1 Shackle thickness: 1mm

Bulb, clear, 6V, 3mm diameter, 50mA, 10cm strand length. 2 piece. White connecting strands.

1x UHU lightning-fast superglue. 3g pipette. Fine dosing tip for precise gluing. Flows into the smallest corners and gaps. Stable and shock-proof container. Bonds securely: -many plastics - porcelain - metal - wood - rubber. Stable container. Lightning fast, with pipette. 3g liquid.

Corrugated surface plate (2pcs) double rice grain. Dim. 0,6x183x285mm. Very easy to bend. Well editable. For scale 1:16 to 1:14. Material: polystyrene. 2 pieces. Corrugation size approx. 3x1,6mm.

Set (9 pieces) of precision applicator tips. For the fine dosing of all kinds of adhesives. For the fine dosing of all kinds of adhesives. 9 different cannula thicknessesCannulas from approx. 0,5 -1,5 mmLength approx. 30 mmPerfect for precise application of adhesives, greases, solutions or paintsFor attaching to 4,5 mm tubes, e.g. for syringes of 1 ml or 5 ml or suitable for numerous superglue bottles

Blue light (1 piece), 7mm diameter, 13mm height. Plastic, blue cover, aluminum base. 1 bulb 6V/50mA. White connecting wires, approx. 100mm long.

Flash module. Suitable for connecting LEDs, lamps, etc. Max. current 8A when flashing, 5A when continuously operating. Flash module is suitable for connecting LEDs, lamps, etc. with a current requirement of max. 8A/channel when flashing, 5A/channel when continuously operating. (Note the series resistor for LEDs!) The output flashes, the flash speed can be regulated depending on the proportional channel and can be switched on or off. This module is suitable for connection to a remote control receiver. Connection of the switching module to an output of the receiver. The switching voltage is connected to input 3. Consumers are connected to the connector strip and supplied by the external voltage. Technical data: Operating voltage 4,8-9 V Switching voltage max. 30V Switching current max. 8ASwitch function 1 Dimensions approx. 12x40 mm Weight approx. 3,5g

Bulb, yellow, 6V, 2,3mm diameter, 10cm strand length. 2 piece. White connecting strands.

Bulb, yellow, 6V, 3mm diameter, 50mA, 10cm strand length. 2 piece. White connecting strands.

Uno Switch (1 channel switching module) 1x 5A, switching voltage up to 30V, operating voltage 4,8 - 9V, 12x40m, 5g. Uno Switch (1 channel switching module)This switching module can be used if 1 consumer is to be switched with one channel. The module is equipped with a memory function that allows 1 consumer to be switched. This is often required, for example, when remotely controlling lighting. Any free proportional channel or 3-stage switch can be used as a transmitter.The switching module is plugged directly into a receiver output. This means that any free channel on the transmitter can be used to switch consumers in the model. All variants are wired ready for installation - just connect a power source up to a maximum of 30 V and the consumer to be switched.The new series of electronic switching modules is manufactured entirely in Germany.Technical data:Switching functions: 1Switching current max. 1x 5ASwitching voltage max. 30VOperating voltage 4,8 - 9VDimensions approx. 12x40 mmWeight 5g

Relay polarity reversal module for multi-switch decoder Switching relay with connection cable for multi-switch decoder to increase the switching capacity to 16 A. The relays are already wired in such a way that after connecting the motor and battery, the functions forward, stop and reverse are available. Suitable for switching special functions with high power consumption, such as pumps, electric motors, etc. This module cannot be operated directly on the receiver. Technical data: Dimensions: 62 x 35 x 20 mm Weight: approx. 40 g Switching function: 1 Operating voltage: 4,8 - 12 V Switching voltage max: 24 V Switching current max: 16 A

Mini speed controller MIKROSPEED 6V. Speed ​​controller for stepless speed control forward-stop-backward. Maximum 6V, maximum 1A. The MIKROSPEED 1 speed controller is suitable for stepless control of the motor speed with reversal of the direction of rotation of DC micro motors with a maximum current requirement of 1 A. The speed controller can be controlled with a proportional or switching channel. To do this, the speed controller must be plugged into the corresponding slot in the receiver. With a proportional channel, the direction of rotation can be changed and the speed can be continuously regulated. With a 3-stage switch, the motor will only work at max. speed forward/stop/max. speed backward. The MIKROSPEED I speed controller and the electric motor are supplied with power from the receiver battery or via the built-in BEC of another speed controller for the drive. The maximum voltage must not exceed 6V. Suitable plug connections for the motor are available.Notes on useThis product is only intended for installation in RC models with a maximum operating voltage of 6 V =.Technical data:Operating voltage 4,8-6VCurrent load max. 1ADimensions without cable 9x14 mmWeight approx. 3gFunction continuously forward/stop/backward

Relay module 16A for multi-switch decoder. This relay module can be connected to the multi-switch decoder with the item number 6453 and 6464.Switching relay with connection cable for multi-switch decoder to increase the switching capacity up to 16 A. Suitable for switching special functions with high power consumption, such as pumps, electric motors, etc.This module cannot be operated directly on the receiver. Technical data:Dimensions 55 x 20 x 20 mmWeight approx. 25 gSwitching function 1Switching voltage max: 24 VSwitching current max: 16 A

1x UHU all-purpose superglue. 3g tube. No solvents. No pungent fumes. Bonds almost all solid and flexible materials - also suitable for polystyrene. Bonds reliably: - many plastics - porcelain - ceramics - metal - wood - rubber - polystyrene. No solvents, no pungent fumes. Can be corrected. Does not stick fingers together immediately. 3g liquid.

High current connector, green, 8-pin. 1 pair (1x plug, 1x coupling) for soldering. 6A per pin. Reverse polarity protected. Ideal as separable connections when multi-pin cable harnesses are used. Suitable for lighting and special functions. Can be used, for example, for power lines between the ship's hull and superstructure. After soldering, the individual lines are insulated with shrink tubing. Reverse polarity protected for soldering Suitable for cables up to 0,5 mm² cross-section Load capacity up to 6A per pin Dimensions 10x7x13 mm Scope of delivery: 1x 8-pin socket, 1x 8-pin plug Note: The term plug or socket does not refer to the design of the plug connection, but always to the electrical contacts.

Grinding sticks (10 pieces) with 2 different grits (80 and 240). Double-sided. 170mm long. 5x with 13mm width and 5x with 10mm width.

Masking tape 1mm wide, self-adhesive, 18m long, WITHOUT hand dispenser! 2 pieces. Ideal for masking curves and rounded edges as a painting aid. Acid-free. 2 rolls of 18m each. Flexible masking tape 1mm wideThis acid-free tape was developed to follow curved lines and contoured surfaces without warping, tearing or letting paint through.Ideal for model making, airbrushing, art, crafts and hobbies. The tape sticks, holds and can be removed cleanly and without leaving any residue. Precise masking for sharp paint edges.Acid-free.Packaging:Two rolls of 18m each