1 MPX high current socket, green, 6-pin original multiplex, 1 piece.

1 servo HS-645MG (Hitec). Powerful standard servo. Dimensions: 40x20x37mm. 55gr. Metal gear. 2 ball bearings. 77/96Ncm. 0,24s/60°. Uni/JR connector. Powerful standard servo. Ideal as a steering servo. Scope of delivery: 1 servo 5 control discs/levers Fastening material Gearing: 24T Ball bearing: yes Waterproof: no Torque at 4,8V: 8kgcm Torque at 6,0V: 10kgcm Gear: metal Motor type: brushed Electronic type: analog

1 Servo HS-40 (Hitec). Analogue nano servo. Dimensions: 20x8,6x17mm. 4,8gr. Nylon gear. 6 / 7,6Ncm. 0,12s / 60 °. Uni / JR plug. Power is supplied with 4 different servo arms.

1 MPX high-current connector, green, 6-pin, original Multiplex, 1 piece. M6-50. New version! Up to 50A continuous current.

Servo tester Power Peak. The ideal helper for setting up servos. Small, light, handy with digital display. 4,8 - 6V. The ideal helper for setting up optimal servo centers, no remote control equipment requiredSmall, light, handy and with digital displayUp to 4 servos can be connected3 different modes selectable: manual adjustment, automatic center output (1500 micro sec.), continuous operationClock frequency adjustable for analog and digital servosOperating range: 4,8V to 6V, pulse length spectrum: 800-2200 micro sec.Dimensions: 75x38x27 mm, weight: 27 gBelongs in every toolbox and every workshopIdeal helper for setting up or troubleshooting servos, controllers, switching components and all modules that are controlled via a PWM signal.

1 servo HS-85MG (Hitec). Analogue powerful mini servo. Dimensions: 29x13x30mm. 22g metal gear. 3/4kgcm. 0,14-0,16s/60° Uni/JR connector. Servo is supplied with various servo levers. Ball bearing. It is considered one of the most robust servos in this class. The analogue HS-85MG servo with its 3-pole brush motor offers unparalleled durability thanks to its exclusive metal gear and a ball bearing on the output shaft, which is particularly suitable when low play and high positioning precision are important. The HITEC servo HS-85MG delivers maximum performance with minimal weight and with these data is also a favorite for industrial applications. The long service life and the uniquely designed gear make it one of the most reliable and efficient mini servos on the market.Features:- Longlife potentiometer- High durability- Metal gear- Ball bearingTechnical dataWidth: 13 mmHeight: 30 mmLength: 29 mmWeight: 0.022 kgServo type: standardSpecial features: analogMotor type servos: brushedGear: metalOperating voltage in V: 4,8-6,0 V

1 servo HS-81 (Hitec). Analogue standard micro servo. Dimensions: 29,8x12x29mm. 17gr. Nylon gear. 2,6/3Ncm. 0,11s/60°. Uni/JR connector. Servo is supplied with various servo levers. The HS-81 impresses with its good price-performance ratio. The analogue HS-81 servo is equipped with a 3-pole brush motor and elastic nylon gears.Technical dataWidth: 12 mmHeight: 30 mmLength: 30 mmWeight: 0.017 kgServo type: standardSpecial features: analogMotor type servos: brushedGear: nylonOperating voltage in V: 4,8-6,0 V

1 servo HS-65MG (Hitec). Analogue powerful micro servo. Dimensions: 24x12x24mm. 12g metal gear. 2Ncm. 0,11-0,14s/60°. Uni/JR connector. Servo is supplied with various servo levers.

1x metal horn for servo, half arm. HITEC, output lever. Cyan. 4 holes 1,6mm. Teeth T24. Suitable for servos: HS-5245 / 5625 / 5645 / 5925 / 5945MG / 7235 / 7245MH / 5085GM.

1 servo HS-5645MG (Hitec). Powerful digital servo. Dimensions: 41x20x38mm. 60gr. Metal gear. 2 ball bearings. 103/121Ncm 0,23s/60°. Uni/JR connector. For 4,8-6V! Very powerful digital servo. Also suitable as a steering servo. Scope of delivery: 1 servo 4 control discs/levers 1 metal half-arm servo lever Fastening material

1 servo HS-225MG (Hitec). Analogue mini servo. Dimensions: 32,4x16,8x31mm. 31gr. Metal gear. 39/48Ncm. 0,14s/60°. Uni/JR connector. Servo is supplied with 4 different servo arms. Servo with 1 ball bearing. When a lot of torque and high speed is required despite low weight and small dimensions!

Servo HS-82MG (Hitec). Analogue standard micro servo. Dimensions: 30x12x30mm. 19gr. Metal gear. 2,8/3,4 kgcm. 0,12s/60° Uni/JR connector. Servo is supplied with various servo arms. It is considered one of the most robust servos in this class. The analogue HS-82MG servo with its new powerful motor offers unparalleled durability thanks to its exclusive metal gear. The HS-82MG delivers maximum performance with minimal weight and with these data is also a favorite for industrial applications. The HITEC servo HS-82MG delivers maximum performance with minimal weight and with these data is also a favorite for industrial applications. The long service life and the uniquely designed gear make it one of the most reliable and efficient mini servos on the market.Features:- Longlife potentiometer- High durability- Metal gearTechnical dataWidth: 12 mmHeight: 30 mmLength: 30 mmWeight: 0.019 kgServo type: standardSpecial features: analogMotor type servos: brushedGear: metalOperating voltage in V: 4,8-6,0 V

1 servo HS-646WP (Hitec). Powerful analog servo. Dimensions: 41x20x40mm metal gear. 2 ball bearings. 70/90Ncm 0,26s/60°. Uni/JR connector. For 4,8-8,4V! The waterproof analog standard servo is tested according to the industry standard IP67. The HS-646WP offers what it should: it is 100% waterproof, unparalleled durability thanks to its exclusive metal gear, with 2 ball bearings on the output shaft. It is particularly suitable when high positioning precision and low play are important. The HITEC servo HS-646WP delivers maximum performance with minimal weight and with these data is sure to be a favorite for industrial applications. The long service life and the uniquely designed gear make it one of the most reliable and efficient analog servos on the market. The waterproof HS-646WP is ideal for ship and submarine model building, as well as off-road cars. Technical data: Width: 21 mm Height: 40 mm Length: 41 mm Weight: 0.058 kg Servo type: Standard Special features: Wide-voltage analog Motor type servos: brushed Gearbox: Metal Operating voltage in V: 4,8-8,4 V Setting time s/60° at 4,8 volts: 0.26 Setting time s/60° at 6,0 volts: 0.22 Torque in kgcm at 4,8 volts: 7 Torque in kgcm at 6,0 volts: 9 Gearing: 24T Ball bearings: Yes Waterproof: Yes Recommended flight: No Recommended helicopter: No Recommended car: Yes Recommended boat: Yes  

1 BID chip (battery identification) for storing battery data and parameters. 1 BID chip with 30cm cable. (4-pin) 1 BID chip (battery identification) for storing battery data and parameters. 1 BID chip with 30cm cable. (4-pin) Safe and easy operation, as well as automatic storage of the most important battery data in the robbe BID system. Simply connect the BID chip to the charger and start charging. The BID chip automatically makes all necessary settings on the charger. The BID chip prevents incorrect settings on the charger, which could damage the battery. The BID chip is so small and light (0,5 g) that it can be attached to the battery or shrink-wrapped. Plug connections are attached to both sides of the chip, allowing for easy handling and reducing cable weight. The following data is stored in the chip: (Charging settings) Battery type Cell count Battery capacity Charging current Discharge current Date (initial use) Delta peak cut-off voltage Cut-off temperature (per charging process): Current charged capacity Current discharged capacity Maximum charged capacity Maximum discharged capacity Number of charging cycles

1 Roxxy BL-Control 930-6. Controller for brushless motors. Forward/reverse function programmable. For internal and external rotor operation. (8630). Forward and reverse functions programmable.Governor mode, optionally programmable with or without speed controller mode.Plug-on programmer for simple and clear setting of functions.Can be set to either internal or external rotor operation.Brake can be switched on and off via programming.High clock frequency (32000 Hz) for sensitive control.Integrated temperature protection.Designed for 6-18 NC/NiMH cells or 2-6 LiPo cells.Programmable undervoltage shutdown.Coordinated with the ROXXY BL motor series, but can also be used for other BL motors.With the usual robbe protection and filter functions (POR start-up protection, RX filter).Weight: 29g.Dimensions: 49x25x10mmShort term: 35ABEC: 5,5V/max. 2A Additional functions (only with optional programmer!) - Shutdown voltage - Shutdown module - Motor timing - Acceleration - Start - Power - Braking force - Governor (speed controller mode)

HITEC Servo D-625MW digital servo Dimensions: 40x20x38mm. 68g. Metal gear. 6,3/8,8/10,0kgcm. 0,20s/0,15s/0,13S/60°. Voltage 4,8-7,4Volt. Connector JR-UNI

1 servo HS-5625MG (Hitec). Powerful digital servo. Dimensions: 41x20x38mm. Metal gear. 2 ball bearings. 80/100Ncm 0,17s/60°. Uni/JR connector. For 4,8-6V! For applications that require a fast standard digital servo, the HS-5625MG is an excellent choice. The HS-5625MG servo is fully programmable and offers unparalleled durability thanks to its exclusive metal gear, which is particularly suitable when low backlash and high positioning precision with moderate mechanical shock are important. The HITEC servo HS-5625MG delivers maximum performance with minimal weight and with these data is sure to be a favorite for industrial applications. The long service life and the uniquely designed gear make it one of the most reliable and efficient mini servos on the market. The HS-5625MG servos for the demanding model sports enthusiast, whether in the aircraft, car or boat sector. Features: Digital MOS-FET amplifier Longlife potentiometer High holding power Two ball bearings Metal gear Technical data: Width: 20 mm Height: 38 mm Length: 41 mm Weight: 0.06 kg Servo type: Standard Special features: Digital Servo motor type: brushed Gear: Metal Operating voltage in V: 4,8-6,0 V Setting time s/60° at 4,8 volts: 0.17 Setting time s/60° at 6,0 volts: 0.14 Torque in kgcm at 4,8 volts: 8 Torque in kgcm at 6,0 volts: 10 Gearing: 24T Ball bearings: Yes Waterproof: No Recommended flight: Yes Recommended helicopter: Yes Recommended car: Yes Recommended boat: Yes  

1x special servo HSR-2645CR (Hitec). 360° servo. Dimensions: 41x20x38mm. 53gr. Endlessly rotating servo! 80/100Ncm metal gear. Uni/JR connector. For 4,8-7,4V! 46/72 rpm. Ball bearing. Endlessly rotating servo with 1 control disc (round) and fastening material. Servo rotates endlessly in both directions (suitable for drives), depending on the position of the control stick (encoder in the transmitter). Digital servo, programmable, wide-voltage: 4,8-7,4V. 2 ball bearings. 3 metal number wheels.

1 BID chip (battery identification) For storing battery data and parameters. Safe and easy operation as well as automatic storage of the most important battery data in the BID system. Simply connect the BID chip to the charger and start the charging process. The BID chip automatically makes all necessary settings on the charger. The BID chip prevents incorrect settings on the charger, which could damage the battery. The BID chip is so small and light (0,5 grams) that it can be attached to the battery can be attached or shrunk in. There are plug-in connections on both sides of the chip, which enable easy handling and save cable weight. The following data is stored in the chip: (charging settings) Battery type Number of cells Battery capacity Charging current Discharging current Date (initial commissioning) Delta peak Switch-off voltage Switch-off temperature (per charging process) :current loaded capacitycurrent discharged capacitymaximum charged capacitymaximum discharged capacityNumber of charging cycles

1 servo HS-5585MH (Hitec). Powerful digital servo. Dimensions: 40x20x38mm. 59gr. Metal gear. 2 ball bearings. 114/117Ncm 0,17s/60°. Uni/JR connector. For 4,8-8,4V! Suitable for 2s operation! Powerful digital servo. Also suitable as a steering servo. Scope of delivery: 1 servo 4 control discs/levers Fastening material

1 servo HS-5565MH (Hitec). Powerful digital servo. Dimensions: 40x20x38mm. 59g. Metal gear. 2 ball bearings. 110/140Ncm 0,11s/60°. Uni/JR connector. For 6-8,4V! Powerful digital servo. Also suitable as a steering servo.Scope of delivery:1 servo4 control discs/leversFastening materialSuitable for 2S LiPo operation.Technical data:Width: 20 mmHeight: 38 mmLength: 40 mmWeight: 59 grServo type: standardSpecial features: wide-voltage digitalMotor type servos: brushedGearbox: metalOperating voltage in V: 4,8-8,4 VSetting time s/60° at 6,0 volts: 0.11Setting time s/60° at 7,4 volts: 0.09Torque in kgcm at 6,0 volts: 11Torque in kgcm at 7,4 volts: 14Gearing: 24TBall bearings: YesWaterproof: NoRecommendation for flight: YesRecommendation for helicopter: YesRecommendation for car: YesRecommendation for boat: Yes

1 special servo HSR-1425CR (Hitec). 360° servo. Dimensions: 41x20x37mm. 42gr. Endlessly rotating servo! 28/34Ncm nylon gear. Uni/JR connector. For 4,8-6V! 44/52 rpm. 2 ball bearings. Endlessly rotating servo with 1 control disc (round) and mounting material. Servo rotates endlessly in both directions (suitable for drives), depending on the position of the control stick (encoder in the transmitter). Width: 20 mm Height: 37 mm Length: 41 mm

1x ROXXAR 20A speed controller (multiplex). Affordable controller for car and ship models. Max. 20A. 6-7 NiMH cells. With BEC 5V, max. 2-3 servos. Electronic speed controller with forward, neutral, brake and reverse functions. Full-fledged reverse stage for RC cars, trucks and ship models. Microprocessor-controlled, with high motor clock frequency for standard and tuning motors. Gearbox-friendly thanks to the special arrangement of the dynamic brake and reverse gear.- POWER-MOS field effect transistors- Receiver supply BEC 5V, 2-3 servos- High clock frequency for sensitive control- Start-up protection, prevents the motor from starting accidentally- Thermal overload protection- Undervoltage shutdown- Controller shutdown if there is no or incorrect signal- Automatic programming, only the neutral position is programmed- LED display for operating and programming functionDimensions:41 x 47 x 26mmWeight: 63gr.Number of cells: 6-7Max.Current: 20A

Servo MD250MW (Hitec). Digital 15mm servo. Dimensions: 35x15x33mm. 31gr. Metal gear. 4,9/8 kgcm. 0,16s/60° Uni/JR connector. Servo is supplied with aluminum servo arm. Magnetic encoder / Hall sensorHighest resolution of the servo travelSuper fine responseProgrammableHigh actuating forceExcellent holding forceMetal gear2 ball bearings MR106/MR8525 toothing on the servo outputServo is supplied with aluminum servo armTechnical data:Acting time: 0,2 sec/60° at 4,8V. 0,16 sec/60° at 6V0,13 sec/60° at 8,4VTriving force: 4,9 kgcm at 4,8V. 6kgcm at 6V. 8kgcm at 8,4V.Dimensions: 35x15x33 mm

1 BID key (battery identification) for storing battery data and parameters. BID system = battery identification system. Safe and easy operation and automatic storage of the most important battery data in the BID system. Simply connect the BID key to the charger and start the charging process. The BID key automatically makes all the necessary settings on the charger. The BID key prevents incorrect settings on the charger, which could damage the battery. The BID key is so small and light (4,5 g) that it can be attached to the battery. The key has plug connections that make it easy to use and save cable weight. The following data is stored in the BID key: (Charging settings) Battery type Number of cells Battery capacity Charging current Discharge current Date (first use) Delta peak cut-off voltage Cut-off temperature (per charging process): Current charged capacity Current discharged capacity Maximum charged capacity Maximum discharged capacity Number of charging cycles

1x S-BEC 5V/6V switchable, 3A. Input voltage 6-21V. Max. output current 3A. Output voltage 5,0V/6,0V switchable! The total current consumption of all connected consumers must not exceed 3A! (max. 5A for 5 sec.). The BEC must be protected from moisture! All consumers must ALWAYS be supplied from ONE voltage source. The simultaneous use of a BEC controller and this power BEC is NOT permitted. To deactivate the controller BEC (BEC of the speed controller), interrupt/cut through and insulate the positive cable of the receiver connection cable of your speed controller (usually the RED cable).

1 BID cable (battery identification) 50cm cable (4-pin) on both sides with BID-plugs. WITHOUT BID chip!

1 charger Power Peak Uni7 EQ, 230V. (308564). With 7 charging outputs that can all be used simultaneously. Total charging current max. 3,6A. The charging outputs are divided according to battery type: 2 outputs with CC-CV shutdown for LiPo/LiFe batteries with integrated balancer. 4 constant current outputs for NiCd/NiMH batteries, one of which has a delta peak shutdown. Output 7 is also equipped with a CC-CV shutdown and is set for the voltage level of lead batteries. - Short circuit protection - Reverse polarity protection - Protection against incorrect connection Output 1: 1000mA 1-4S LiPo/LiFe cells with CC-CV shutdown and equalizer. Output 2: 500mA 1-4S LiPo/LiFe cells with CC-CV shutdown and equalizer. Output 3: 1000mA 4-8 NiCd/NiMH cells with delta peak shutdown. Output 4: 250mA 4-8 NiCd/NiMH cells. Output 5: 250mA 4-8 NiCd/NiMH cells. Output 6: 120mA 4-8 NiCd/NiMH cells. Output 7: 500mA for 1,3, 6 or 150 cell lead battery with CC-CV shutdown. Technical data: Dimensions: 130x80x560mm Weight: XNUMXg.

1 servo HS-75BB (Hitec). Analogue, strong special servo. Dimensions: 44x23x25mm. 35g. Nylon gear. 6,7/8,4kgcm. 0,45s/60°. Uni/JR connector. Servo is supplied with various servo arms. Voltage 4,8-6 volts. Ball bearing output. Special servo: This servo does NOT work proportionally! It runs slowly - without interruption - from full deflection to full deflection. Low-profile servo of the <= 23 mm classThe robust HS-75BB low-profile servo especially for retractable landing gear or special functions.The servo does not work proportionally, but runs slowly from full deflection to full deflection (180 degrees) without interruption.The HS-75BB analog servo impresses with its three-pole brush motor, elastic nylon gears and a ball bearing on the output shaft, which is particularly suitable when low play and high positioning precision are important.Features:-Low profile design-High torque-Slow speed for realistic retraction action-Nylon gear-1 ball bearingTechnical dataWidth: 23 mmHeight: 25 mmLength: 44 mmWeight: 0.035 kgServo type: low profileSpecial features: analogMotor type servos: brushedGear: nylonOperating voltage in V: 4,8-6,0 VPositioning time s/60° at 4,8 Volt: 0.45Setting time s/60° at 6,0 Volt: 0.34Torque in kgcm at 4,8 Volt: 7Torque in kgcm at 6,0 Volt: 8Gearing: 24TBall bearings: YesWaterproof: NoRecommendation for flight: YesRecommendation for helicopter: NoRecommendation for truck: YesRecommendation for boat: Yes

HITEC DPC 11 servo programmer adjustment verschiedenenr servo parameter storing, testing, retrieving with DPC 11 software. Downloadable software Series DXXX, HSB 9XXX, HS7-XXX HS 5XXX

1 Multiplex RX-4/16 M-Link, FLEXX receiver. 4+16-channel, 2,4 GHz receiver. Max. 4 proportional and 16 switching channels (55837). Universal receiver with serial SRXL servo output. Adjustable Multiplex Smart-ID for intelligent model recognition. With hold/fail-safe function. Frequency band: 2,4 GHz. Modulation: FHSS. Channels: 4x proportional plus max. 16 switching functions. Connector system: UNI/JR. Voltage: 3,5-9 V. Dimensions: 34 x 20 x 11 mm. Weight: 7 g.

1 charger (Hitec). 12V/230V charger with max. 6A. Charging/discharging device. X1-RED. Universal charger for home and on the go at a fair price. Illuminated display. 12V/230V charger with max. 6A. LCD screen.Charging, discharging, cyclic charging/discharging NiXX, balancing LiXX, battery voltage display (LiXX), warning signals, safety functions.Battery types: LiPo, Lilon, LiFe, NiMh, NiCd, lead batteryNumber of cells: LiXX: 1-6, NiXX: 1-16, Pb/lead: 1-6Input voltage: 11-18V DC or 100-230V ACCharging current: max. 6ADischarging current: up to 2ADimensions: 123 x 73 x 159mmWeight: 470gScope of delivery:Charger, connection cable 220V AC, universal charging cable with multiplex plug, 1x XT60 cable, 1x balancer adapter board (MPX/TP/FP).Operating instructions.12V / 230 V charger with max. 6AThe HITEC charger X1 RED is a microprocessor-controlled 12V / 230 V ultra-performance charger with management functions for all common battery types. Its slim tower design enables easy front operation. All inputs: 4mm battery plug, balancer connection (XH), temperature sensor ports, USB-5V/2,1A and Micro B-USB. Special features are the easy-to-read 3,2-inch LCD screen and the HITEC Charge Master software, with which you can conveniently operate the X1 RED via the computer. This compact 60-watt power charger allows you to carry out all your charging processes easily and conveniently. Features: Optimized operating software 10 different charging/discharging profiles Integrated balancer for lithium batteries Suitable for different lithium battery types Lithium charging programs: Normal, Fast, Balance and Storage Charging PC Charge Master Software Efficient fan for maximum performance with low heat generation Slim tower design Reverse polarity protection

Equalizer adapter JST, multiplex. Balancer connection to charger: EH. adapters and adapter cables.

1 receiver Multiplex RX-4/9 M-Link, FLEXX. 4+9 channel, 2,4GHz receiver. Max. 4 proportional and 9 switching channels. (55837). Universal receiver with SRXL serial servo output. Adjustable multiplex smart ID for intelligent model recognition. With hold/fail-safe function.Frequency band: 2,4GHzModulation: FHSSChannels: 4x proportional plus max. 9x switching functionPlug system: UNI/JRVoltage: 3,5-9VDimensions: 34x20x11mmWeight: 7gr.

1 POWER-PEAK D7 charger (multiplex). Powerful 2-way home charging station with battery management and integrated power supply. With 2 integrated equalizers and BID system. Both outputs can be used completely independently of each other! 2-way charger with power supply, 12V (DC) and 220V (AC) input. BID chip function! (Battery Identification System) Maximum power 2x 20A simultaneously! Processor-controlled high-performance charging/discharging station, with management functions for all common battery types. With integrated equalizers for 1 to 7 cell Li-Po/Li-Ion/Li-Fe batteries.Features:for Li-Po, Li-Fe, Li-Ion, NiCD, NiMh, Pb batteriesCharging/dischargingBalancer (LiXX)Battery voltage display (LiXX)Safety functionsMax. number of cells: Li-Po/Li-Fe: 1-6 cells, NiCd/NiMh: 1-18 cells, Pb: 2-24VInput voltage AC: 110-240V, DC:10,5-18VCharging/discharging currents: 0,1-20A (per output)Dimensions/weight: 270x200x85mm / 2,6kgOf course, batteries with and without a BID chip can be charged! Set contents:Charger, power cable, crocodile clips, BID key, instructions.

HITEC Servo D-955TW digital servo dimensions: 40x20x37mm. 66g. Titanium gear. 18/24/29kgcm. 0,19s/0,15s/0,12s/60°. Voltage 4,8-7,4Volt. Connector JR-UNI

1 multi-charger (Hitec). 4-way professional charger/discharger for 12 and 220V. Microprocessor-controlled high-performance charging/discharging station HiTEC X4ACplus. 4-way charger with power supply and 12V input. Maximum power 4x 6A simultaneously! Processor-controlled high-performance charging/discharging station, with management/care functions for all common battery types. With integrated equalizer for 6-cell Li-Po/Li-Ion/Li-Fe batteries.Features:for Li-Po, Li-Fe, Li-Ion, NiCD, NiMh, Pb batteriesCharging/dischargingcyclic charging/discharging (Nixx)Balancer (LiXX)Battery voltage display (LiXX)Safety functionsMax. number of cells: Li-Po/Li-Fe: 1-6 cells, NiCd/NiMh: 1-15 cells, Pb: 2-20VInput voltage DC: 11-18VInput voltage AC: 110-240VCharging/discharging currents: 0,1-6A (max. 4x 50W)/0,1-1A (max. 4x 5W)Dimensions/weight: 255x170x66mm / 1,73kg

HITEC Servo D-845WP digital servo Dimensions: 66x32x32mm. 227g Waterproof to IP67. 32,5 / 40,5 / 50 kg cm 0,26s / 0,21s / 0,17s / 60 ° Spg. 4,8-7,4Volt. Plug JR UNI

1 POWER-PEAK C8 charger (Multiplex). Powerful computer charging station with battery management and integrated power supply unit. With integrated equalizer and BID system. 12V / 230V charger with max. 10A.High-performance computer charging/discharging station with battery management.BID system display of capacity, voltage, equalizer single cell voltage, charging time, battery storage (BID), battery type, etc.Optional automatic or manual charging/discharging, BID system, display of: charged and discharged capacity, input and charging voltage, equalizer single cell voltage.Battery types: LiPo, Lilon, LiFe, NiMh, NiCd, lead batteryNumber of cells: LiXX: 1-8, NiXX: 1-21, Pb/lead: 1-8Input voltage: 10-15V DC or 230V ACCharging current: up to 10ADischarge power: up to 35WEqualizer current: 250mABID chip system: yesDimensions: 145 x 180 x 70mmWeight: 750gr.Scope of delivery:Charger, power cable, connection cable 12V DC, equalizer adapter JST/XH, 2 crocodile clips (red/black), BID key.Every battery pack to be charged can be equipped with the BID system. The following BID items are available for this (not included): BID key, item 11457 BID chip, items 8049, 8050 BID cable, item 8051 (not required for BID key)  

1 servo HS-53 (Hitec). Analogue standard micro servo. Dimensions: 22,8x11,6x22,6mm. 8gr. Nylon gear. 1,5/1,9kgcm. 0,14s/60°. Uni/JR connector. Servo is supplied with various servo arms.1 servo HS-53 (Hitec). Analogue standard micro servo. Dimensions: 22,8x11,6x22,6mm. 8gr. Nylon gear. 1,5/1,9kgcm. 0,14s/60°. Uni/JR connector. Servo is supplied with various servo arms. Servo properties: Nylon plastic gear Dust-proof plastic housing JR/hitec connector system Technical data: Properties HS-53 (HiTec) Operating voltage: 4,8-6,0V Actuating time 4.8V: Actuating time 6.0V: 0,11s / 60° Actuating torque 4,8V: 1,5 kgcm Actuating torque 6,0V: 1,9 kgcm Weight: 8 g Dimensions: 22,8 x 11,6 x 22,6 mm Area of ​​application: Slow and park flyers, models up to 1400 mm wingspan, hydraulic valve actuation.

1 Servo Tiger MG (Multiplex). Powerful standard servo. Dimensions: 40x20x40mm. 57gr. Metal gear. 2 ball bearings. 80/100Ncm. 0,16s/40°. Uni/JR connector. Powerful standard servo. Also suitable as a steering servo.Scope of delivery: 1 servo 8 control discs/levers Fastening material Instructions

HITEC Servo D-980TW digital servo Dimensions: 43,8x22,4x40mm. 78,2g. Titanium gear. 26 / 36 / 44kgcm. 0,28s / 0,21s / 0,17S / 60 °. Spg. 4,8-7,4Volt. Plug JR UNI

HITEC Servo D-930SW digital servo Dimensions: 40x20x37mm. 66g. Metal gears. 8 / 10 / 13kgcm. 0,10s / 0,08s / 0,07s / 60 ° Spg. 4,8-7,4Volt. Plug JR UNI

Multiplex USB PC cable RX + S + telemetry. Enables the reading / programming / updating / setting of many M-Link, PPM, M-PCM, via RX Data Manager. Update MultiMate, programming of sensors

HFP-30 servo programming device for Multiplex digital servos. HFP-30 servo programming deviceThe HFP-30 servo programming device (HiTEC Field Programmer) is used to program/set and test HiTEC digital servos and is impressively easy to use. It offers numerous functions on the large and easy-to-read LCD screen. Suitable for the following HiTEC servos: HS-5XXX, 7XXX, HSB-9XXX and the new D series (with the exception of HS-59xx servos)Programmable functions:Setting the center and end points (180° function)Setting the direction of rotation (clockwise/counterclockwise)Setting the dead zone (electronic "play")Setting the speed (servo can be made slower)Setting the soft start (servo slowly runs to its neutral position when switched on for the first time)Setting the fail-safe functionSetting the overload protection (servo becomes "soft" if overloaded for too long, which prevents it from burning out in the worst case scenario)Saving or loading settingsResetting to factory settingsOperating voltage 4,8 - 8,4V, depending on servo typeA must for every HiTEC servo owner!

1x Super S-BEC 5,2V/6V/6,8V/7,4V/8,4V switchable. Input voltage 11,1-60V. Output current 10A (continuous), 15A (short). Dimensions: 54x31x16mm. Weight 48g. With contactless safety switch! The total current consumption of all connected consumers must not exceed 10A! (max. 15A for 5 sec.). The BEC must be protected from moisture! All consumers must ALWAYS be supplied from ONE voltage source only. The simultaneous use of a BEC controller and this power BEC is NOT permitted.To deactivate the controller BEC (BEC of the speed controller), interrupt/cut and insulate the positive wire of the receiver connection cable of your speed controller (usually the RED cable).The desired output voltage is set using mini DIL switches on the back of the housing.Factory default: 6,0V.A bright, white LED signals when the adjustable undervoltage of the battery is reached.

1 charger POWER PEAK B6 EQ-BID. Compact, inexpensive charging/discharging station with 12V and 230V connection. 12V / 230V charger with max. 5A.Compact and inexpensive charging/discharging station with battery management.BID system display of capacity, voltage, equalizer single cell voltage Optional automatic or manual charging/discharging, BID system, display of: charged and discharged capacity, input and charging voltage, equalizer single cell voltage.Battery types: LiPo, Lilon, LiFe, LiHV, NiMh, NiCd, lead batteryNumber of cells: LiXX: 1-6, NiXX: 1-14, Pb/lead: 1-6Input voltage: 10-15V DC or 230V ACCharging current: 0,1 - 5ADischarging current: 0,1 - 10A (max. 5W)Equalizer current: 300mADimensions: 142 x 89 x 25mmWeight: 230gr.Scope of delivery: charger, power cable, connection cable 12V DC, switching power supply 230V -5A, temperature sensor, BID chip, USB cable, balance adapter 2-6S (TP/JST/XH), universal charging cable with crocodile clips, receiver and transmitter charging cable Futaba.

HITEC Servo D-954SW digital servo Dimensions: 40x20x37mm. 66g. Metal gears. 18 / 24 / 29kgcm. 0,19s / 0,15s / 0,12s / 60 °. Spg. 4,8-7,4Volt. Plug JR UNI

HITEC Servo D-951TW Digital Servo Full Metal Case. Dimensions: 40x20x38mm. 80g. Titanium transmission. 21 / 29 / 35kgcm. 0,23s / 0,17s / 0,14s / 60 °. Spg. 4,8-7,4Volt. Plug JR UNI

1 servo HS-5086WP (Hitec). Digital micro servo. Dimensions: 31x15x31mm. 28gr. Metal gear. 1 ball bearing. 30/40Ncm. 0,18s/60°. Uni/JR connector. The waterproof, digital micro servo is tested according to the industry standard IP67. The HS-5086WP servo offers what it should: it is 100% waterproof, unparalleled durability thanks to the exclusive metal gear with a ball bearing on the output shaft, which is particularly suitable when low play and high positioning precision are important. The programmable servo HS-5086WP delivers maximum performance with low weight and with these data is sure to be a favorite for industrial applications. The long service life and the uniquely designed gear make it one of the most reliable and efficient digital micro servos on the market.Width: 15 mmHeight: 31 mmLength: 31 mmWeight: 28 gr.Servo Type: StandardSpecial features: DigitalMotor type servos: brushedGear: MetalOperating voltage in V: 4,8-6,0 VTegration time s/60° at 4,8 volts: 0.18VTegration time s/60° at 6,0 volts: 0.15Torque in kgcm at 4,8 volts: 3Torque in kgcm at 6,0 volts: 4Gearing: 24TBall bearings: YesWaterproof: YesRecommendation flight: NoRecommendation helicopter: NoRecommendation car: YesRecommendation boat: Yes

1 multi-charger (Hitec). 4-way professional charger/discharger for 12V. HiTEC H4. Microprocessor-controlled high-performance charging/discharging station. 12V 4-way charger with max. 16A.Its high-quality aluminum housing, the very easy-to-read graphic display, with intuitive operation and the 4 microprocessor-controlled charging outputs with integrated balancers make the HiTEC H4 the perfect charger.Charging, discharging, storage charging LiXX, cyclic charging NiXX, balancing LiXX, multi-peak NiXX.Battery types: LiPo, Lilon, LiFe, NiMh, NiCd, lead batteryNumber of cells: LiXX: 1-6, NiXX: 1-15, Pb/lead: 1-12Input voltage: 11-18V DCCharging current: 0,1 - 8A (4A max. 120W, 2x max. 240W)Discharging current: 0,1 - 2A (max. 10W) ​​or 4A (max. 20W)Dimensions: 205 x 163 x 52mmWeight: 1200gr.Scope of delivery:Charger, connection cable 12V DC, crocodile clips, channel bridge cable (Y-cable), universal charging cable with UNI plug, Tamiya, Traxxas, Deans 2-pin, H4 mounting bracket.

1 PowerBox (Hitec). ePowerBox 17A. Power supply with 17A Power supply specially adapted to the X1 Pro charger, but which can also be used as a compact power supply for other chargers worldwide.Features:- LED indicator- Powerful fan- Input voltage 100-240V for worldwide use- Active power factor correction filter for safe operation- Two outputs/top and side- With on/off switch- USB socket for mobile devicesFunctions:- regulated fan- Input voltage AC: 100 - 240 Volt- Output voltage: 13,8 Volt DC +/-0,2V- Output current: 17 A + /-0,5 A- USB output: 5 V 2,1 ADelivery contentsPower supply ePOWER BOX 17A, power cable 230 VTechnical dataWidth: 126 mmHeight: 51 mmLength: 92 mmWeight: 0.602 KgInput voltage: AC 100-240 VPower in watts: 330BID chip system: No

HITEC Servo D-940TW digital servo Dimensions: 40x20x38mm. 68g. Titanium gear. 10,0 / 13,5 / 16,5kgcm. 0,11s / 0,08s / 0,07S / 60 °. Spg. 4,8-7,4Volt. Plug JR UNI

1 BID cable (battery identification) 30cm cable (4-pin) on both sides with BID-plugs. WITHOUT BID chip!