Robbe Model Sports

Graupner receiver HOTT GR-16, 2,4GHz. 8-channel, Graupner

1 Graupner receiver HOTT GR-16, 2,4GHz. 8-channel, Graupner. HOTT system 2,4GHz. The GR-16 receiver can control up to 8 servos. Two LEDs indicate the operating status. Servo connections on the front. Wide voltage range: 3,6-8,4V. Current consumption: approx. 70mA. Dimensions: 64 x 21 x 14mm. Connector system: JR. Model: GR-16 HoTT. HF modulation: FHSS. Channels: 8. Frequency: 2,4GHz. Weight: 12g. The Graupner GR-16 HoTT receiver has approximately... It has a range of 4000m and can be configured with up to 8 channels. Utilizing GRAUPNER HoTT 2,4GHz technology, the receiver features a secure hopping telemetry transmission high-frequency section with high-quality components and state-of-the-art software. A diversity antenna always switches to the better antenna signal for reception and always uses the antenna that was last used for reception for transmission. This ensures that the return channel data is transmitted via the better-positioned antenna. The receiver transmits the parameters "receiver voltage," "receiver temperature," and "signal strength" to the transmitter without additional sensors. Features: The use of up to 75 channels ensures extreme operational reliability and is insensitive to external interference. The wide receiver voltage range of 3,6 V - 8,4 V (functional down to 2,5 V) ensures full functionality even with voltage fluctuations. Two LEDs indicate the operating status. Compact size and minimal weight. Very high receiver input sensitivity, resulting in a very long range. Front-mounted servo connectors facilitate installation and guarantee secure connections. Failsafe, Hold, OFF, and Standard (Channel 1 = Failsafe, all others Hold) are programmable. Compatible with all HoTT transmitters. Functions with optional SMART-Box. 3 mixers are programmable. Servo curves are programmable linearly, degressively, and exponentially. Sum signal at the "Channel 8" output. Programmable. Servo travel limiting and reversal also possible in the receiver. Failsafe, hold, and off for the servo channels individually programmable. Warning thresholds for undervoltage, overtemperature, and undertemperature programmable. Servo test function. The SMART-Box is available as an option and is not included with the receiver. Compatible with all HoTT transmitters. Technical data: Channels: 8. Sum signal output: Yes. Dimensions approx.: 46 x 21 x 14 mm. Weight approx.: 12 g. Frequency: 2400 ... 2483.5 MHzModulation: 2.4 GHz FHSSRange: approx. 4000 m Current consumption: 70 mA Operating voltage: (2,5V) 3,6V to 8,4VA Number of antennas: 2 (Diversity) Antenna length: 2x wire 145 (antenna 30) mm Temperature range: -15 to +70°CHoTT- is the synthesis of know-how, engineering and worldwide tests by professional pilots. A 2,4 GHz system that is setting the standard for the future of RC model building. HoTT (Hopping Telemetry Transmission) offers safety with up to 75 channels. HoTT uses Frequency Hopping Spread Spectrum technology. (FHSS) HoTT offers integrated real-time telemetry. (Expandable) HoTT is fully programmable using the Smartbox. System Features: Simple and extremely fast binding; range test and undervoltage warning function; extremely wide receiver operating voltage range from 3,6 V to 8,4 V (functional down to 2,5 V); failsafe, free channel mapping; binding of any number of receivers for channel expansion (max. (32 channels) Up to 4 servos can be controlled simultaneously in blocks with a servo cycle time of 10 ms (Digital servos only!) Maximum interference immunity thanks to optimized frequency hopping and wide channel spread. Extremely fast rebinding, even at maximum distance. Real-time telemetry evaluation. Future-proof thanks to update capability via USB interface.

No longer available

Product number: 8486

€ 85,60 * € 89,90 * (4.78% saved)

Subscriptions

Details

Graupner receiver HOTT GR-24, 2,4GHz. 12-channel, Graupner

1 Graupner receiver HOTT GR-24, 2,4GHz. 12-channel, Graupner. HOTT system 2,4GHz. The GR-24 receiver can control up to 12 servos. Two LEDs signal the operating status.Front servo connections.Large voltage range: 3,6-8,4V.Current consumption: approx. 70mA.Dimensions: 64 x 31x 14mm.Plug system: JRModel: GR-24 HoTTHF modulation: FHSSChannels: 12Frequency: 2,4. 16GHzWeight: 24gr.The Graupner GR-12 controls up to 24 servos. Thanks to antenna diversity, the best antenna signal is always used. Receiver voltage, temperature and signal strength are transmitted to the HoTT transmitter without additional sensors. The GR-3,6 is extremely insensitive to interference. The wide voltage range guarantees full functionality from 8,4 V to 2,5 V and is even functional up to 24 V. The servo connections on the front make installation easier and always guarantee a tight connection. The operating status of the receiver is displayed using two LEDs . Compared to the previous version, the size and weight have been reduced, but the range has been significantly increased. Failsafe, Hold, Off and Standard are freely programmable on the GR-33700. For older transmitters without the bi-directional Graupner HoTT technology, we recommend installing one Graupner Smart Box (No. 75). Take advantage of the additional programming and telemetry data options.Product featuresThe use of up to 3,6 channels ensures extreme operational reliability and is insensitive to external interference.The wide receiver voltage range of 8,4 V - 2,5 V (functional up to 1. 5 V) ensures full functionality even in the event of voltage fluctuations. Two LEDs signal the operating status. The size and weight could be reduced. The receiver input sensitivity and thus the range has been further increased. Front-side servo connections. Failsafe, Hold, OFF and standard (channel 8 failsafe, all other hold) programmable.Functions with SMART-BOX:19 mixers programmableServo curves linear, degressive and exponential programmableSum signal input or output on channel 22programmable (e.g. for V-Stabi, Microbeast, quadrocopter, wireless student function with mc-31/14 HoTT , flight simulators, satellite function) Limitation and reversal of the servo paths also possible in the receiver Failsafe, hold and OFF for the servo channels individually programmable Warning thresholds for undervoltage, overtemperature and undertemperature programmable Servo test function Technical data Width [mm]: 15 mm Height [mm]: 70 mm Temperature range [°C]: -2 . .. +145 °CAntenna length [mm]: 30x wire 16 (antenna 2400) mmTotal weight [g]: 2483,5 gFrequency: 4000 ... 46 MHzRange approx. [m]: 46 mLength [mm]: 31 mmDimensions [LxWxH in mm]: 14 x 2.4 x 70 mmModulation: 2,5 GHz FHSSCurrent consumption [mA]: 3,6 mAOperating voltage [V]: (8,4) 12 ... 2 VChannels: XNUMXNumber of antennas:XNUMX

No longer available

Product number: 8561

€ 128,95 * € 129,90 * (0.73% saved)

Subscriptions

Details

Superglue, MEDIUM VISCOSE. 20g bottle. Seal SPEED

1x superglue, MEDIUM VISCOSE. 20g bottle. Robbe Speed Type 2. One component and therefore easy to use. Curing time 10-30 seconds. Store in a cool place. Cap color: green. Superglue: universally applicable. Curing time: 10-30 seconds. Viscosity: medium viscosity. Storage: store in a cool place.

Available immediately, delivery time: 1-4 days

Product number: 12529

€ 2,59 * € 2,99 * (13.38% saved)

Subscriptions

Superglue, LOW LIQUID. 20 gr. vial. Seal Type1

1x superglue, THIN. 20g bottle. Robbe Speed Type 1. One component and therefore easy to use. Curing time 3-10 seconds. Store in a cool place. Cap color: white. Superglue: universally applicable. Curing time: 3-10 seconds. Viscosity: thin. Storage: store in a cool place.

Available immediately, delivery time: 1-4 days

Product number: 12531

€ 2,59 * € 2,99 * (13.38% saved)

Subscriptions

Servo DES 707 BB, MG, Graupner. With metal gears and 2

1 servo DES-707 BB,MG, Graupner. With metal gear and 2 ball bearings. Voltage 4,8-6,0V. Dimensions: 40x39x19,5mm without mounting flanges. Weight 53g. Torque 133/150 Ncm (4,8/6,0V). Very powerful digital servo - ideal as a steering servo. Actuating torque 133 Ncm at 4,8V or 150 Ncm at 6,0V. Actuating time 0,17s/40° at 4,8V or 0,14s/40° at 6,0V. Current consumption max. 1,6A (4,8V) / 1,95A (6,0V). Toothing: 25Z. Supplied with various control discs and fastening material.

Available immediately, delivery time: 1-4 days

Product number: 8098

€ 55,10 * € 59,89 * (8% saved)

Subscriptions

Superglue, THICK. 20 gr. vial. Robbe DICK

1x superglue, THICK. 20g bottle. Robbe Speed Thick. One component and therefore easy to use. Curing time 10-30 seconds. Store in a cool place. Cap color: yellow. Superglue: universally applicable. Curing time: 10-30 seconds. Viscosity: thick. Storage: store in a cool place.

Available immediately, delivery time: 1-4 days

Product number: 12532

€ 2,59 * € 2,99 * (13.38% saved)

Subscriptions

Glühbirnchen, red, 6V, 2,3mm diameter 50mA, 10cm

Incandescent bulbs, red, 6V, 2,3mm diameter, 50mA, 10cm wire length. 2 pieces. White connecting wires.

No longer available

Product number: 7840

€ 3,99 *

Subscriptions

Details

Light bulb, red, 6V, 3mm diameter, 50mA, 10cm

Light bulb, red, 6V, 3mm diameter, 50mA, 10cm wire length. 2 pieces. (1655). Yellow wires.

Available immediately, delivery time: 1-4 days

Product number: 7841

€ 3,87 *

Subscriptions

Servo DES-708 BB, MG, Digital.Graupner. With metal gear

1 servo DES-708 BB,MG, digital.Graupner. With metal gear and 2 ball bearings. Voltage 4,8-6,0V. Dimensions: 40x39x19,5mm without mounting flanges.Weight 53g. Torque 88/105 Ncm (4,8/6,0V). Graupner digital servo DES 708.Standard servo from Graupner.Toothing: 25ZThis Graupner servo is supplied with 4 servo disks and mounting material.

Available immediately, delivery time: 1-4 days

Product number: 9583

€ 49,60 * € 52,90 * (6.24% saved)

Subscriptions

Chain 1/8 inch 38 links. Length 120 mm spare part 8.3 (2x)

Chain 1/8 inch 38 links. Length 120 mm, spare part 8.3 from robbe forklift. Total width 3,7 mm. Length of a single link 1/8 inch or 3,175 mm. Scope of delivery: 2 chain pieces.

Available immediately, delivery time: 1-4 days

Product number: 7599

€ 68,00 *

Subscriptions

Superglue Cleaner. 20ml. vial. Seal Remover

1x superglue cleaner. 20ml. bottle. Robbe cleaner. Single component and therefore easy to use. Store in a cool place. Cap color: white. Removes adhesive residue from hands, upholstery, plastics and many other materials. A material test is recommended before use.

Available immediately, delivery time: 1-4 days

Product number: 12533

€ 3,80 * € 3,99 * (4.76% saved)

Subscriptions

MC-28HoTT computer remote control transmitter, 16-channel, Graupner

1 MC-28HoTT computer remote control transmitter, 16-channel, Graupner. HOTT system 2,4GHz. 16 control functions, 120 model memories. 2 4D joysticks, 10 switches/buttons, 2 proportional sliders. Four-dimensional perfection - The Graupner remote control mc-28 HoTT with 4D control sticks is designed for the functional model builder who needs additional functions on the control stick. The 4D control sticks have an additional button that can be defined as a button or switch in the software and a self-neutralizing potentiometer. This can be used, for example, to control the camera inclination and direction of a cameracopter or a crane boom. The mc-28 is suitable for almost all models. 16 control functions, 2 channels can be reprogrammed to multi-channel functions so that numerous additional switching tasks can be handled, 120 internal model memories, integrated telemetry and voice output as well as the fast and safe bi-directional transmission of the Graupner HoTT 2,4 GHz technology make the mc-28 a true all-rounder. The mc-28 remote control has an internal circular polarized patch antenna with a very high range and reliability. Two large, high-contrast displays provide information about telemetry data and parameters at all times and enable quick and easy programming. The switches and buttons on the remote control can be freely assigned and thus individually adapted. 12 mixers are available for programming. 8 switching phase programs with announcement function can be adapted and named for each model. Thanks to the micro SD card and micro USB interface, telemetry data and model memory can be imported and exported. Upgrades to the computer system are also performed in a straightforward manner. Built-in Bluetooth v2.1+ EDR module with 115200 baud for the Graupner HoTT Viewer for Android application (firmware >=2.2) for displaying telemetry data on the mobile phone and for voice output via the mobile phone. The voice outputs can be individually scheduled and preset. Warnings can be defined on the mobile phone. Furthermore, a Bluetooth® v2.1+ EDR headset can be connected directly without a smartphone. Current software and firmware can be found in the "Service/Help" section under "Updates" at www.graupner.de. Manufacturer's recommended age: 14 years and up. Product features: Ailerons with new offset function for easy course corrections and quick turns; 3 ring limiters for Voith-Schneider drives and similar; Channel sequencer for 3 channels for folding propellers and landing gear doors; Logical switches; Trim memory; Multi-channel function for channel expansion up to 14 additional channels; Music player and internal speaker for voice outputs and music; Servo assignment swapping on the Receiver output on transmitter and receiver side. PPM signal adjustable at the data output. General HoTT features: Simple and extremely fast binding. Range test and warning function. Undervoltage warning. Extremely wide receiver operating voltage range from 3,6 V to 8,4 V (functional down to 2,5 V). Failsafe, free channel mapping, mixing functions and all servo settings are easily programmable with the internal telemetry.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 10649

€ 968,99 * € 1.099,00 * (11.83% saved)

Subscriptions

Activator for superglue. 150ml. Spray can. seal

1x Activator for superglue. 150ml. Spray can. Robbe ACTIVATOR. One-component and therefore easy to use. For all cyanoacrylate adhesives. Just a touch of activator is enough to accelerate curing. Suitable for all superglues. Activator in spray form for accelerating and curing cyanoacrylate adhesives. For quick fixing, spray the adhesive gap with activator and apply the adhesive into the gap. Adjust parts if necessary and spray on activator.

Available immediately, delivery time: 1-4 days

Product number: 12530

Content: 0.15 liters (33,27 €* / 1 litre)

€ 4,99 *

Subscriptions

Charging cable banana plug/MPX plug ca.30cm cable 14AWG

1x charging cable, banana plug/MPX plug. Approx. 30cm cable, 14 AWG, 2,0 mm² cross section, for charging a battery pack with an MPX socket. Gold-plated multi-pin plugs, 4 mm connector plug.

Available immediately, delivery time: 1-4 days

Product number: 12811

€ 5,99 *

Subscriptions

Multi-function switch module SXH with 1 output of 16A max

1 Multi-function switching module SXH with 1 output, max. 16A. Max. voltage 21,5V. On/Off (memory). Weight: 8g. Dimensions: 16 x 13 x 4mm. This heavy-duty switching module is the "electronic successor" to conventional mechanical servo-mounted switches. Designed for high loads and voltages, devices such as pumps can be conveniently switched on and off via transmitter and receiver. The module is connected to a receiver output and switches the voltage of your device's external power supply on or off using the transmitter's stick or switch. Switching functions: On/Off (memory). Maximum switchable voltage: 5-cell LiPo batteries, 14-cell NiMH batteries (21,5V). Designed for currents up to 16A. The module is powered by the receiver battery up to max. 8,5V (2-cell LiPo batteries). Weight approx.: 8g. Approximate dimensions: 16 x 13 x 4 mm.

Available immediately, delivery time: 1-4 days

Product number: 12247

€ 27,39 *

Subscriptions

RIM adapter trailer axle set with 2 piece. 5mm bore

Rim adapter trailer axle set with 2 pieces. 5mm bore, with plastic dummy hubs, black. robbe 33350035 Including 4 ball bearings 4x9x4mm. Suitable for all rims with a bolt circle diameter of 22mm. Ball bearings are included!

No longer available

Product number: 6493

€ 14,90 *

Subscriptions

Details

Square rubber grommets for servos, 20 piece. F1120. Approximately 9x6mm,

Square rubber grommets for servos, 20 piece. F1120. Approximately 9x6mm, 4mm thick.

No longer available

Product number: 6015

€ 5,49 * € 6,50 * (15.54% saved)

Subscriptions

Details

Speed controller Rokraft 50µP, up to 7A. robbe 8417. With BEC

Rokraft 50µP speed controller, up to 7A. Robbe 8417. With 5V BEC system for 1-2 servos. Compact speed controller for small models or special functions. With 2,8mm Faston connector for the drive battery. Miniature speed controller with very sensitive motor control for small models. Microprocessor-controlled with high motor clock frequency. Non-linear control curve for sensitive control in the lower partial load range. Full forward and reverse control with high resolution and no disruptive braking function in the neutral position - for perfect maneuvering! Operating voltage: 4-7 NiCd/NiMH cells (5-8,4V) max. Short-term current: 7A Weight: 14g Dimensions: 40 x 28 x 8mm Features: Fine, proportional control High motor clock frequency (hec) Sensitive start-up Flexible silicone connection cables Powerful BEC power supply Wear-free output stage Over-temperature protection (TP) POR - power-on protection PCO - under-voltage shutdown Rx filter - switches off the controller in case of missing or invalid transmitter signal Splash-proof thanks to acrylic lacquer sealing (WP) Simplest programming of the forward, stop, dynamic ranges Brake and reverse – only one input button and LED monitor display. Technical data: Dimensions: 40 x 28 x 8 mm. Protection functions: hec, BEC, POR, eps, PCO. Weight approx.: 14 g. Short-term current: 7 A. Load current: 5 A. Number of cells: 4-7 NC/NiMH with BEC or 6 V lead-acid battery. Connector system: Futaba 2.8 mm Faston. Functions: Forward, Stop, Reverse. BEC: 5V, 0,5A

Available immediately, delivery time: 1-4 days

Product number: 7337

€ 33,30 *

Subscriptions

Charging cable banana plug/XT60 plug. approx. 50cm cable 14AWG

1x Charging cable with banana plug/XT60 connector. Approx. 50cm cable, 14 AWG, 2,0mm² cross-section. For charging a battery pack with XT60 socket. Gold-plated lamellar connectors, 4mm plug diameter. Alternative items: Items 13581, 13570

Available immediately, delivery time: 1-4 days

Product number: 12810

€ 6,99 *

Subscriptions

Charging cable banana plug/TAMIYA plug approx. 30cm cable

1x charging cable banana plug/TAM plug. Approx. 30cm cable 14 AWG, 2,0 mm² cross section for charging a battery pack with TAMIYA socket. Gold-plated lamella plugs, connection plug 4mm.

Available immediately, delivery time: 1-4 days

Product number: 12812

€ 4,59 *

Subscriptions

Transmitter battery LIPO 1S2P 4000 mAh 3,7V. Suitable for MC-26

1x transmitter battery LIPO 1S2P 4000 mAh 3,7V. Suitable for the Graupner transmitters MZ-24, MZ-18, MC-26. 3,7V. 4000mAh. 75gr. 86x41x13mm.

End of life - article no longer available!

Product number: 12875

€ 29,89 *

Subscriptions

Details

Searchlight (1 piece), 20mm Dia. Plastic,

Searchlight (1 piece), 20mm diameter, plastic, chrome-plated, pivoting, rotating housing and holder, lens, bulb 6V (1374)

Available immediately, delivery time: 1-4 days

Product number: 3330

€ 6,35 *

Subscriptions

Kugelbolzen M2,5. 9mm distance. With Allen. (2

Kugelbolzen M2,5. 9mm distance. With Allen. (2 piece). D4,8mm ball.

No longer available

Product number: 4151

€ 6,00 *

Subscriptions

Details

MC-26HoTT computer remote control transmitter, 16-channel, Graupner

1 MC-26HoTT computer radio control transmitter, 16-channel, Graupner. HOTT system 2,4GHz. 16 control functions, 120 model memories. 2 2D joysticks, 10 switches/buttons, 2 proportional sliders. The Graupner mc-26 HoTT radio control with 2D joysticks is also designed for functional model builders. The mc-26 is suitable for almost all models. 16 control functions, 2 channels can be reprogrammed for multi-channel functions, allowing numerous additional switching tasks to be handled, 120 internal model memories, integrated telemetry and voice output, as well as the fast and reliable bidirectional transmission of Graupner HoTT 2,4GHz technology, make the mc-26 a true all-rounder. The mc-26 radio control features an internal circularly polarized patch antenna with very long range and reliability. Two large, high-contrast displays provide real-time information on telemetry data and parameters, enabling quick and easy programming. The remote control's switches and buttons can be freely assigned and thus individually customized. Twelve mixers are available for programming. Eight switching phase programs with voice prompts can be customized and named for each model. Telemetry data and model memory can be imported and exported via micro-SD card and micro-USB interface. Upgrades to the computer system are also performed with ease. Voice outputs can be individually scheduled and played back. Current software and firmware can be found in the "Service/Help" section under "Updates" at www.graupner.de. Manufacturer's recommended age: 14 years and up. Product features: WK with new offset function for easy course corrections and quick turns; 3 ring limiters for Voith-Schneider drives and similar; 3-channel channel sequencer for folding propellers and landing gear doors; Logical switches; Trim memory; Multi-channel function for channel expansion up to 14 additional channels; Music player and internal speaker for voice outputs and music; Adjustable PPM signal at the data output. General HoTT features: Simple and extremely fast binding; Range test and warning function; Low voltage warning; Extremely wide receiver operating voltage range from 3,6 V to 8,4 V (functional down to 2,5 V); Failsafe, free channel mapping, mixing functions, and all servo settings are easily configured with the internal telemetry. programmable

Ready to ship in 40 days, delivery time 1-4 days

Product number: 12841

€ 554,50 * € 579,00 * (4.23% saved)

Subscriptions

Servo Robbe FS 31 pico (8449). 8mm servo 4,7gr., 9Ncm,

Servo Robbe FS 31 pico (8449). 8mm servo 4,7gr., 9Ncm, 0,15sec / 45 17 ° x x 22,0 8 mm. Incl. Assembly parts / Servohebel.

No longer available

Product number: 3324

€ 24,00 *

Subscriptions

Details

Glühbirnchen, clear 6V, 3mm diameter 100mA, 10cm

Bulb, clear, 6V, 3mm diameter, 100mA, 10cm strand length. 2 piece. (1658) SOLD OUT.

End of life - article no longer available!

Product number: 5624

€ 4,20 *

Subscriptions

Details

Charging cable banana plug/BEC plug approx. 30cm cable AWG20

Charging cable with banana plug/BEC plug, approx. 30cm cable, AWG20, 0,5mm², for charging a battery with a BEC socket. 4mm connector. (46105)

Available immediately, delivery time: 1-4 days

Product number: 13520

€ 4,40 *

Subscriptions

Kugelbolzen M2,5. 6mm distance. With Allen. (2

Kugelbolzen M2,5. 6mm distance. With Allen. (2 piece). D4,8mm ball.

End of life - article no longer available!

Product number: 4149

€ 6,40 *

Subscriptions

Details

Anlenkgestänge for Cargo-steering axle, robbe 33500024

Anlenkgestänge for Cargo-steering axle, robbe 33500024.

No longer available

Product number: 1756

€ 7,20 *

Subscriptions

Details

Key channel 2 positions for Futaba, short

Key channel 2 positions for Futaba, short 1-(1). 1-pole switch without center. robbe 8233.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 6114

€ 13,95 *

Subscriptions

Transmitter battery with Molex connector for F-series transmitters

Transmitter battery with Molex connector for transmitters of the F-series. 2x4 cells 3500mAh NiMH. 172x45x23mm. 445 gr. (4569) eg for FC16 boat 's truck.

No longer available

Product number: 5729

€ 63,99 *

Subscriptions

Details

Speed controller rookie 20 TAM, up to 20A robbe 8400. Complete

Rookie 20 TAM speed controller, up to 20A Robbe 8400. Fully functional forward/reverse. 5-10 cells, BEC 5V 1,2A. Weight 60g. Short-term current 25A. 46x37x25mm. With Tamiya connector for the drive battery. For standard 540 motors and tuning motors with 15 turns or more. Microprocessor-controlled with high motor clock frequency. Gearbox-friendly due to the special arrangement of the dynamic brake and reverse stages. Easy programming of forward, stop, dynamic brake, and reverse functions. Only 1 input button and LED monitor display. Proportional controller for brushed motors. Cell count: 5-10 NiCd/NiMH or 6-12V lead-acid battery. Battery connector system: 1.5 mm² JST/TAM. Fine and proportional control. High motor clock frequency (hec). Sensitive start-up. Flexible silicone connection cable. Powerful 5V/1,2A BEC system. Wear-free output stage. Over-temperature protection (TP). POR - power-on protection. PCO - under-voltage cutoff. Rx filter - switches off the controller if the transmitter signal is missing or invalid. Splash-proof thanks to acrylic lacquer coating (WP). Easiest programming of forward, stop, dynamic brake, and reverse ranges. Only one input button and LED monitor display.

End of life - article no longer available!

Product number: 7024

€ 34,99 * € 38,99 * (10.26% saved)

Subscriptions

Details

Multi-Servo Adjuster for 4 servos. MSA10 A servo channel

Multi-Servo Adjuster for 4 servos. MSA10 A servo channel is divided into up to 4 servo outputs. Each of these max. 4 servos can be adjusted individually. F1651.

No longer available

Product number: 5730

€ 85,00 *

Subscriptions

Details

1 Benders set for 2mm pipes. Complements Article 6591

1 Benders set for 2mm pipes. Complements Article 6591. robbe. Comprising: Nut Profile (backstop) for 2mm pipes, each 1 bending roller 5,10,20mm

End of life - article no longer available!

Product number: 6592

€ 24,00 *

Subscriptions

Details

Doll 100mm Country Girl, robbe 1633

Doll 100mm Country Girl, robbe 1633.

End of life - article no longer available!

Product number: 1754

€ 14,49 *

Subscriptions

Details

MAN TGA window set Robbe 33010014

Available immediately, delivery time: 1-4 days

Product number: 3484

€ 21,90 *

Subscriptions

Fire extinguishers (1: WDC), 2 piece, plastic, unpainted,

Fire extinguishers (1: WDC), 2 piece, plastic, unpainted, hollow, 43mm high 13mm diameter. NO LONGER beschaffbar!

Ready to ship in 8 days, delivery time 1-4 days

Product number: 6351

€ 5,50 *

Subscriptions

Tube of high-performance grease. 50g. (robbe)

1 tube of high-performance grease. 50g. (robbe). Special shaft grease. Hazard statements: H319, H361d, H413. Properties: Ideal for greasing stern tubes. Prevents water ingress, extremely water-resistant, wide operating range from -10°C to +120°C. Friction and wear are reduced to a minimum by special additives. Corrosion-protective. Suitable for plain and rolling bearings. Water hazard class WiGKO2.2. Labeling elements 12/2022: Labeling according to Regulation (EC) No. 1272/2008. This mixture is not classified as hazardous within the meaning of Regulation (EC) No. 1272/2008. Hazard pictograms: not applicable. Signal word: not applicable. Hazard statements: not applicable. Precautionary statements: not applicable. Wording of H and EUH statements (number and full text): H319 Causes serious eye irritation. H361d Suspected of damaging the unborn child. H413 May cause long-lasting harmful effects to aquatic life. 2.3 Other hazards: No information available.

Available immediately, delivery time: 1-4 days

Product number: 12716

Content: 0.05 kg (145,80 €* / 1 kilogram)

€ 7,29 *

Subscriptions

Charging cable with banana plugs/8-way, approx. 30cm cable, 14 AWG

1x Charging cable with banana plugs/8-way, approx. 30cm cable, 14 AWG, 1,0mm² cross-section. With 8 different output connectors. Gold-plated lamellar connectors, 4mm plugs. Multi-charging cable with 8 different outputs. Connector 1: 4mm lamellar connector, gold-plated (banana plug) red/black. Connector 2: 1x Tamiya socket, 1x Tamiya mini socket, 1x XT-60 connector, 1x T-plug, 1x TRX connector, 1x BEC connector, 1x Micro JST, 1x loose end for self-configuration

Available immediately, delivery time: 1-4 days

Product number: 13522

€ 11,89 *

Subscriptions

Channel number label for frequency monitoring 40 MHz,

Channel number label for frequency monitoring 40 MHz, robbe 80711000

Ready to ship in 8 days, delivery time 1-4 days

Product number: 3128

€ 2,59 *

Subscriptions

Forklift Linde H50 kit robbe 3349, M = 1: 16 max

Forklift Linde H50 kit robbe 3349, M=1:16 max. lifting height 200mm L:285mm W:115mm H:170/270mm. Now with rear swing axle. NO LONGER AVAILABLE! NO LONGER AVAILABLE! Article only as a source of information in the shop! A model with high play value that is a lot of fun to play with! Contents of the kit: Colored body parts (half shells). Ball-bearing, driven front axle with differential. Drive motor with gearbox. Oscillating rear axle. Rims and tires, rim caps. All parts for the tiltable, fully functional lifting mast. Lifting motor with gearbox parts. Lifting cylinder (threaded spindles) for lifting mast. Fork carrier and forks. Cab frame, steering column, steering wheel. Holder for steering servo and tilt servo (tilting mast). Reversing switch for lifting motor. Electric main switch. Counterweight, protective roof. Driver's seat with console, hood, stick dummies. Rear part, rear grille, exhaust, antenna tube. Extensive illustrated assembly instructions, decal sheet. The video also shows accessories that are not part of the kit! For this model you will find extensive accessories that increase the play value of this forklift even more! We recommend the following for the driving model: 1x Servo S3115 Micro (item 7594) for the mast tilt function1x Servo S3003 (item 3989) for the steering function1x Controller THOR15HC (item 3019) for the drive motor1x Controller THOR4 (item 3020) for the lifting motor1x Drive battery (item 5561) 6V/2000mAh

End of life - article no longer available!

Product number: 3178

€ 419,00 *

Subscriptions

Details

Charging cable, banana plug/open end, approx. 30cm cable, 14AW

1x Charging cable with banana plugs/open, approx. 30cm cable, 14 AWG, 2,0mm² cross-section, for making your own charging cable. Gold-plated lamellar connectors, 4mm plug.

Available immediately, delivery time: 1-4 days

Product number: 13517

€ 4,40 *

Subscriptions

Charging cable banana plug/Futaba transmitter, approx. 50cm cable

1x Charging cable banana plug/Futaba transmitter, approx. 50cm cable AWG20, 0,5mm² for charging a Futaba transmitter battery. Positive terminal inside. (46101). 4mm connector.

Available immediately, delivery time: 1-4 days

Product number: 13518

€ 4,40 *

Subscriptions

Charging cable banana plug/Graupner transmitter, approx. 50cm, AWG20

1x Charging cable banana plug/Graupner transmitter, approx. 50cm cable AWG20, 0,5mm², for charging a Graupner transmitter battery (charger-transmitter). (46102). 4mm connector.

Available immediately, delivery time: 1-4 days

Product number: 13519

€ 4,40 *

Subscriptions

USB-C data/fast charging cable, 1,2m, USB-C to USB-C

1x USB-C Data/Fast Charging Cable, 1,2m. USB-C to USB-C data and fast charging cable. 1x 100W/240W USB-C cable, 1,2m. 1. Fast charging is possible: This USB-C cable supports multiple fast charging protocols, such as PD3.1/PD3.0, PD3.0/PD2.0, FCP, etc., so it can support up to 100W or 240W of power, making it perfect for fast charging a variety of devices, including mobile phones, laptops, and game consoles. 2. Two length options: The cable is available in two different lengths, 1,2m and 2m, so you can choose the best length for your needs. 3. Wide Compatibility: The cable is compatible with a wide range of devices, including MacBook Pro, Samsung, Switch, PS5, Xiaomi, Huawei, and more. 4. High-Quality Design: The cable is built with high-quality materials and advanced technology to ensure reliable performance and durability. It has a stable, tangle-free design that makes it easy to use and carry. 5. Data Transfer Capability: In addition to fast charging speeds, this USB-C cable also has data transfer capabilities, making it a versatile and convenient accessory for all your devices.

Available immediately, delivery time: 1-4 days

Product number: 13537

€ 5,95 * € 6,99 * (14.88% saved)

Subscriptions

Charging cable with banana plugs/4mm gold contacts, approx. 30cm long

1x Charging cable with banana plug/4mm gold contact, approx. 30cm cable AWG14, 2,1mm², for charging a battery pack with 4mm gold contact connector. 4mm (banana plug) connector.

Available immediately, delivery time: 1-4 days

Product number: 13630

€ 4,40 *

Subscriptions

Robbe Model Sports

Filter products