ScaleART model building manufacturer

PAGE

ScaleART sealing washer IN-233-706 for screw nipple

ScaleART Sealing washer IN-233-706 for screw nipples.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 10578

€ 0,55 *

Subscriptions

ScaleART nipple straight, made of stainless steel, for 3mm hose

ScaleART straight nipple, made of stainless steel, for 3mm hose. Incl. union. Connection thread M3. New article 10/2020. Straight nipple 3mm including unionScope of delivery: 1 straight nipple 3mm 1 union 3mm 1 hollow screw M3 1x sealing washer The hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The visually and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily assembled and, above all, disassembled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections.Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.!Suitable hose: Article 11971.Suitable union wrench: Article 12024.Successor article for article 10573.

Available immediately, delivery time: 1-4 days

Product number: 12031

€ 6,90 *

Subscriptions

ScaleART nipple angled 90 °, made of stainless steel, for 3mm

ScaleART nipple angled 90°, made of stainless steel, for 3mm hose. Incl. union. Connection thread M3. New article 10/2020. Angled nipple 3mm incl. unionScope of delivery:1 angled nipple 3mm1 union 3mm1 hollow screw M32x sealing washerThe hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The optically and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily installed and, above all, dismantled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be reused without having to shorten them. All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections. Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.! Matching hose: article 11971. Matching union wrench: article 12024. Successor to article 10572.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 12028

€ 10,00 *

Subscriptions

Cardan Set 60-200mm -ScaleDRIVE-

1x Cardan Set Scale Drive. adjustable from 60-210mm. For diameters 4mm and 5mm shaft, aluminum shot.

Available immediately, delivery time: 1-4 days

Product number: 9641

€ 37,00 *

Subscriptions

ScaleART sealing washer IN-233-706 for screw nipple

ScaleART Sealing washer IN-233-706 for screw nipples.

Available immediately, delivery time: 1-4 days

Product number: 10571

€ 3,18 *

Subscriptions

ScaleART nipple straight, made of stainless steel, for 4x2,5mm hose

ScaleART straight nipple, made of stainless steel, for 4x2,5mm hose. Incl. union. Connection thread M3. New article 10/2020. Straight nipple 4mm including unionScope of delivery: 1 straight nipple 4mm 1 union 4mm 1 hollow screw M3 1x sealing washer The hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The visually and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily assembled and, above all, disassembled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections.Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.Matching hose 4x2,5mm: Article 12020.Matching union wrench: Article 12025.

Available immediately, delivery time: 1-4 days

Product number: 12041

€ 6,90 *

Subscriptions

ScaleART nipple angled 90 °, made of stainless steel, for 4x2,5mm

ScaleART nipple angled 90°, made of stainless steel, for 4x2,5mm hose. Incl. union. Connection thread M3. New article 10/2020. Angled nipple 4mm including unionScope of delivery: 1 angled nipple 4mm 1 union 4mm 1 hollow screw M3 2x sealing washer The hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The visually and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily assembled and, above all, disassembled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections.Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.Matching hose 4x2,5mm: Article 12020.Matching union wrench: Article 12025.

Available immediately, delivery time: 1-4 days

Product number: 12035

€ 10,20 *

Subscriptions

Leaf spring set -ScaleDRIVE-

1x Leaf Spring Set, Kit, ScaleDRIVE fits the Tamiya Chassis, as Front Axle Suspension, Material: Plastic and Titanium Bronze, Fits Tamiya and Scaledrive Chassis The eye relief of the main spring is 99mm.

Available immediately, delivery time: 1-4 days

Product number: 9619

€ 41,50 *

Subscriptions

ScaleART hydraulic hose 3mm

ScaleART hydraulic hose 3mm. By the meter: 1m. Pressure up to 16 bar. Outside diameter 3,1mm inside diameter 1,9mm.

Available immediately, delivery time: 1-4 days

Product number: 10577

€ 3,00 *

Subscriptions

Pendulum suspension, kit, ScaleDRIVE compatible with Tami

Pendulum suspension, kit, Scale Drive compatible with Tamiya, ScaleART and WDC axes, matches the three-axes

Available immediately, delivery time: 1-4 days

Product number: 9620

€ 90,00 *

Subscriptions

ScaleART union nut for 3mm hose.

ScaleART union nut for 3mm hose. Union nut for 3mm hose.Scope of delivery: 1 union nut 3mm The hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This allows higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The optically and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily installed and, above all, removed again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. Double connections can also be made using the two available sleeve screws (short and long). Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.! Matching hose: Article 11971. Matching union wrench: Article 12024.

Available immediately, delivery time: 1-4 days

Product number: 12029

€ 1,90 *

Subscriptions

ScaleART hydraulic hose 4x2,5mm. By the meter: 1m. Max. 12

ScaleART hydraulic hose 4x2,5mm. Sold by the meter: 1m. Max. 12 bar. Outside diameter: 4mm Inside diameter: 2,5mm. The 4x2,5mm hose is highly flexible and can be laid very easily. However, it tends to kink quickly in tight radii. If the hose kinked during assembly, you should replace it as it will burst at this point later. The larger inside diameter makes it ideal as a return line between the valve block and the pump. Since there is no pressure here, the low pressure resistance is not a problem.

Available immediately, delivery time: 1-4 days

Product number: 12020

€ 5,30 *

Subscriptions

ScaleART hydraulic hose 4mm. By the meter: 1m. Up to max. 30th

ScaleART hydraulic hose 4mm. Sold by the meter: 1m. Up to max. 30 bar. Outside diameter 4mm, inside diameter 2mm. The 4x2mm hose is mainly used for systems with increased flow. This is, for example, the pressure line between the pump and valve block and for connecting telescopic cylinders. It is relatively stiff and somewhat cumbersome to lay. This means it does not tend to bend so quickly on radii and is quite robust. An oil cooler should be used from 20 bar.

Available immediately, delivery time: 1-4 days

Product number: 12019

€ 7,50 *

Subscriptions

ScaleART hydraulic hose 3mm. By the meter: 1m. Print up to 20

ScaleART hydraulic hose 3mm. By the meter: 1m. Pressure up to 20 bar. Outside diameter 3,1mm inside diameter 1,9mm.

Available immediately, delivery time: 1-4 days

Product number: 11971

€ 5,30 *

Subscriptions

Rear differential -ScaleDRIVE-

1x rear axle differential, kit, differential axle without through drive, 6-way ball bearing, ratio 2,67:1, not lockable! Milled steel and bronze gears. Input shaft 4mm with one-sided flattening. Rim adapter with 22mm bolt circle - for 10 screws. Output shafts on the outside with M3 thread.

Available immediately, delivery time: 1-4 days

Product number: 9630

€ 94,50 *

Subscriptions

ScaleART nipple straight incl. union for 3mm hose

ScaleART nipple straight, with sealing washer, including D3 union for 3mm hose. Thread M3. The matching hydraulic hose has the item number 10577. Item 10572 is available as an angled nipple.

Available immediately, delivery time: 1-4 days

Product number: 10573

€ 5,95 *

Subscriptions

Cardan Set 46-60mm -ScaleDRIVE-

1 Cardan Set Scale Drive, adjustable from 46-60mm. For diameters 4mm and 5mm shaft, aluminum shot.

Available immediately, delivery time: 1-4 days

Product number: 9640

€ 37,00 *

Subscriptions

ScaleART straight nipple, made of stainless steel, for 2mm hose. I

ScaleART straight nipple, made of stainless steel, for 2mm hose. Incl. union. Connection thread M3. New article 10/2020. Straight nipple 2mm including unionScope of delivery: 1 straight nipple 2mm 1 union 2mm 1 hollow screw M3 2x sealing washer The hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The visually and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily assembled and, above all, disassembled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections.Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.!Suitable hose: Article 10571.Suitable union wrench: Article 12023.

Available immediately, delivery time: 1-4 days

Product number: 12026

€ 8,43 *

Subscriptions

Servo kit "" kit "" -ScaleDRIVE-

1 servo installation kit, kit, ScaleDRIVE for switching and steering servo fits Tamiya chassis for standard servos made of aluminum, black anodized

Available immediately, delivery time: 1-4 days

Product number: 9621

€ 37,00 *

Subscriptions

ScaleART union nut for 4mm hose.

ScaleART union nut for 4mm hose. Union nut for 4mm hose.Scope of delivery: 1 union 4mm The hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This allows higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The optically and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily installed and, above all, removed again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections. Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.! Matching hose: Article 12019, 12020. Matching union wrench: Article 12025.

Available immediately, delivery time: 1-4 days

Product number: 12030

€ 1,59 *

Subscriptions

Front differential -ScaleDRIVE-

1x front differential, kit, differential axle without drive-through 10 ballraces translation 2,67: 1 not blocked! Milled steel and bronze gears.

Available immediately, delivery time: 1-4 days

Product number: 9631

€ 132,49 *

Subscriptions

ScaleART nipple straight, made of stainless steel, for 4x2mm hose

ScaleART straight nipple, made of stainless steel, for 4x2mm hose. Incl. union. Connection thread M3. New article 10/2020. Straight nipple 4mm including unionScope of delivery: 1 straight nipple 4mm 1 union 4mm 1 hollow screw M3 1x sealing washer The hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The visually and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily assembled and, above all, disassembled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections.Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.Matching hose 4x2mm: Article 12019.Matching union wrench: Article 12025.

Available immediately, delivery time: 1-4 days

Product number: 12033

€ 6,90 *

Subscriptions

Front Axle not driven -ScaleDRIVE-

1x front axle, not driven, kit. Glass fiber reinforced plastic. 4 ball bearings, 2 axle widths. Each set includes 2 axle bodies. This allows an axle width of either 165mm (Wedico scale) or 177mm (Tamiya scale) to be achieved. The spring packages (suitable for the two scales) can also be mounted with different spring package spacing.

Available immediately, delivery time: 1-4 days

Product number: 9623

€ 51,99 *

Subscriptions

ScaleART nipple angled 90 °, made of stainless steel, for 2mm socket

ScaleART nipple angled 90°, made of stainless steel, for 2mm hose. Incl. union. Connection thread M3. New article 10/2020. Angled nipple 2mm including unionScope of delivery: 1 angled nipple 2mm 1 union 2mm 1 hollow screw M3 2x sealing washer The hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The visually and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily assembled and, above all, disassembled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections.Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.!Suitable hose: Article 10571.Suitable union wrench: Article 12023.

Available immediately, delivery time: 1-4 days

Product number: 12021

€ 10,00 *

Subscriptions

Rim narrow silver for Tamiya -ScaleDRIVE-

Narrow rim for Tamiya -ScaleDRIVE- ABS plastic, cast. ScaleART 10 hole drilling pattern. Fits Tamiya models. 1 pair. Inner central hole: 16mm.Bolt circle: 22mm.Total width: 22mm.Tread width: 20mm.Outer diameter: 47mm.

Available immediately, delivery time: 1-4 days

Product number: 9634

€ 7,95 *

Subscriptions

ScaleART nipple angled 90 °, made of stainless steel, for 4x2mm

ScaleART nipple angled 90°, made of stainless steel, for 4x2mm hose. Incl. union. Connection thread M3. New article 10/2020. Angled nipple 4mm incl. unionScope of delivery:1 angled nipple 4mm1 union 4mm1 hollow screw M32x sealing washerThe hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The optically and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily assembled and, above all, disassembled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be reused without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections.Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.!Suitable hose 4x2mm: Article 12019.Suitable union wrench: Article 12025.

Available immediately, delivery time: 1-4 days

Product number: 12032

€ 10,10 *

Subscriptions

Cardan Set 60-200mm -ScaleDRIVE-

1x Cardan Set Scale Drive. adjustable from 60-210mm. For diameters 4mm and 5mm shaft, aluminum shot.

Available immediately, delivery time: 1-4 days

Product number: 9638

€ 168,49 *

Subscriptions

1 through drive set, kit, (for 1 axle) -extends the

1 through-drive set, kit, (for 1 axle) - extends the ScaleDRIVE axles with through-drive. Double ball bearing. Drive pinion made of stainless steel. Through-drive outlet 2mm with one-sided flattening.

Available immediately, delivery time: 1-4 days

Product number: 9632

€ 16,90 *

Subscriptions

ScaleART tool key for 3mm union. Combined G

ScaleART tool wrench for 3mm coupling. Combined open-end/ring wrench for 3mm coupling. Made of stainless steel, lasered. New article 10/2020.

Available immediately, delivery time: 1-4 days

Product number: 12024

€ 10,20 *

Subscriptions

Wide rim silver for Tamiya -ScaleDRIVE-

Rim width for Tamiya -ScaleDRIVE- ABS plastic, cast. ScaleART 10 hole drilling pattern. Fits Tamiya models. 1 pair.

Available immediately, delivery time: 1-4 days

Product number: 9635

€ 7,95 *

Subscriptions

Distributor -caleDRIVE- 2,65: 1

Transfer case, kit, ScaleDRIVE 6-fold ball bearing, ratio 2,65:1, milled steel gears. All shafts and screws made of stainless steel. The shafts have a diameter of 4mm with a flattening.Technical data:Total height: 54mmTotal width (at the mounting flange): 56mmDistance between the shaft connections: 30mm (center-center)Installation depth: 16mmLength of the shaft connections: 5,5mmReduction ratio: 2,65:16-fold ball bearingShaft diameter: 4mm

Available immediately, delivery time: 1-4 days

Product number: 9639

€ 51,99 *

Subscriptions

Euro rim narrow for Tamiya Front

Euro rim narrow for Tamiya, aluminum rim turned from solid. ScaleART 10 hole drilling pattern, suitable for Tamiya models. 1 pair. Inner center hole: 16mm. Bolt circle: 22mm. Total width: 22mm. Tread width: 20mm. Outer diameter: 47mm.

Available immediately, delivery time: 1-4 days

Product number: 9625

€ 29,00 *

Subscriptions

Rim narrow chromed ScaleDRIVE. 20/22mm wide

Chrome rim narrow for Tamiya ABS plastic, cast. ScaleART 10 hole drilling pattern. 1 pair. Chrome-plated rim pair. Bolt circle diameter 22mm. Rim width: 20mm. Total width: 22mm. Outer diameter: 47mm Core hole diameter: 16mm Holes: 10 pieces each 2mm Scope of delivery: 2 rims

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9636

€ 12,99 *

Subscriptions

ScaleART tool key for 4mm union. Combined G

ScaleART tool wrench for 4mm coupling. Combined open-end/ring wrench for 4mm coupling. Made of stainless steel, lasered. New article 10/2020.

Available immediately, delivery time: 1-4 days

Product number: 12025

€ 10,20 *

Subscriptions