Servonaut

PAGE

Tip

1x Servonaut S22 speed controller for model trucks and

1x Servonaut S22 speed controller for trucks and functional models/vehicles. Speed controller for 7,2 to 12V and 20A/5min at 16 kHz clock frequency. BEC 5V/3A. 2 switching outputs, 700mA each for brake light and reversing light, control output for Servonaut sound modules, including instructions, dimensions approx. 70x38x9mm. For functional models of size 1:16 to 1:8. Further development of the well-known S20 controller! Better resolution and sensitivity: 450 speed levels! The inertia of a heavy vehicle is realistically reproduced. Integrated protective functions: - Overload protection - Overtemperature protection - Undervoltage protection Also suitable for bell-shaped armature motors! Seamless EMF braking, no loss of control when driving downhill. Delay-free change forward/backward. Powerful 5V/3A receiver supply with large cooling surface. Diagnostic LEDs.Undervoltage shutdown for 6 or 10 cells NiMH and 2 or 3 cells LiPo.Automatic zero setting with start-up protection.Instructions for this article are available for download. Downloading is free! (except for your online costs).NEW article - follow-up article to the S20!

Available immediately, delivery time: 1-4 days

Product number: 9182

€ 104,99 *

Subscriptions

1x GM32U390, 7,2V planetary gear motor 390U / min. With

1x GM32U390, 7,2V planetary gear motor 390rpm. With quiet, robust planetary gear. As a drive motor for models with underfloor drive. 6mm shaft output. Successor to GM32U370 with approx. 50% more power!Motor data:Voltage: 7,2VPoles: 5Interference suppression: yesIdle speed: 6000 rpmIdle current: 250 mANominal speed: 5000 rpmNominal current: 1,6 ANominal torque: 2,5 NcmNominal power: 14,0 WBlocking current: 10 ABlocking torque: 18 NcmData for motor with gearbox:Reduction ratio: 14:1Diameter: 37mmLength: 85,6 mmWeight: 362 grShaft diameter: 6mmIdle speed: 470 rpmNominal speed: 390 rpmNominal torque: 34,6 NcmThe motor mounts 6242, 7424, 7658, 7379, 7380, 12298.

Available immediately, delivery time: 1-4 days

Product number: 9261

€ 89,50 *

Subscriptions

1x Servonaut MF8 mini-speed controller for adjusting and

1x Servonaut MF8 mini speed controller for actuators and auxiliary drives. WITHOUT BEC! Load capacity up to 8A. Frequency 4kHz. Voltage 6-12V (5-10 NiMH cells). Dimensions: 50x19x7mm. Integrated protection functions: -Overload protection -Overtemperature protection -Undervoltage protection -Automatic zero setting, no start-up protection For drive systems, the S10 or S22 controllers are recommended. These controllers have BEC and connections for brake and tail lights. Instructions are available for downloading this article. Downloading is free! (except for your online costs). NEW ITEM - replaces the previous MFR!

Available immediately, delivery time: 1-4 days

Product number: 9191

€ 33,59 *

Subscriptions

Trailer electronics AMO, with infrared receiver, 7,2V-12V

Trailer electronics AMO with infrared receiver, 7,2V-12V, controls 6 outputs, driving light, brake light, indicator light and tail light plus a special function, 700mA per output - short-circuit proof. One servo output for switching functions (2 in conjunction with K15/30/60) two servo outputs proportional (in conjunction with AIR4 and AIR7/AIRU), integrated BEC for servos 5V/1A, suitable for all Servonaut systems and with the AIR7/AIRU also for most systems from other manufacturers. Dimensions approx. 70x30x12mm. Instructions are available for downloading this article. Downloading is free! (except your online costs).Trailer electronics with IR receiverSuitable for all Servonaut systems and with AIRU module also for most systems from other manufacturersControls 5 to 6 outputs e.g. driving light, brake light, indicator light and tail light and a special functionAlso suitable for road train applications.All outputs 700 mA short-circuit proofOne servo output for switching functions (two in conjunction with K15/30/40/60), two servo outputs proportional (in conjunction with AIR4 and AIR4/AIRU)Integrated BEC for servo 5V/1ASupply voltage: 7,2 to 12 VCurrent consumption: 20 mA (quiescent)Switching function: 5-6Switching voltage: same as supply voltageServo outputs: 3-4Protection function: short circuit, overloadDimensions: approx. 70 x 30 x 12 mmScope of delivery: Module with IR receiver and 3-stage switchIR transmitter AIR4, AIRU or LA10 are NOT included in delivery. Please order separately.

Available immediately, delivery time: 1-4 days

Product number: 5086

€ 95,20 *

Subscriptions

1 Truck sound module SM3 with speed and

1 truck sound module SM3 with engine noise depending on speed and driving situation. Compressed air noise, horn, starting, stopping. 7,2-12V 3 watts at 8 ohms. A free receiving channel required! Successor sound module to the previous SMT. Half the size of the predecessor, space-saving installation. 5 engine types selectable! Previous engine types of the SMT and SMX! Reverse warning tone, adjustable idle and full throttle speed. 5 setups for US or European trucks. Mini volume control for hidden installation on the model. Starter and horn are operated using the joystick or button/switch with 3 positions on the transmitter.Wavetable sound synthesis.Can be combined with many speed controllers from other manufacturers (forward-backward controller without braking range).Power is supplied from the drive battery.With battery connector (BEC).Optional sound controller SM-EQ available as an accessory.Dimensions approx. 55x28x13mm.Instructions are available for downloading this article. Downloading is free! (except for your online costs).Recommended loudspeakers with 7,2V supply voltage:Article with 8 ohms: 7028, 9851, 9852, 9854.Recommended loudspeakers with 12V supply voltage:Article 8962.

Available immediately, delivery time: 1-4 days

Product number: 8961

€ 147,99 *

Subscriptions

Infrared Kingpin matching Tamiya. With retaining clip

Infrared Kingpin matching Tamiya. Diode retaining clip for AMO-IR reception. The diode is simply clicks on. Delivery without IR diode. KBT.

Available immediately, delivery time: 1-4 days

Product number: 5089

€ 10,29 *

Subscriptions

1 motor suppressor consisting of capacitors and 3

1 motor suppressor consisting of 3 capacitors and application instructions. 2x 10nF, 1x 22nF capacitor.

Available immediately, delivery time: 1-4 days

Product number: 7541

€ 2,59 *

Subscriptions

1x Servonaut MFX mini-speed controller for adjusting and

1x Servonaut MFX mini speed controller for actuators and auxiliary drives or servo motors. Load capacity up to 10A. Frequency 16kHz. Voltage 6-12V (5-10 NiMH cells). Dimensions: 50x19x7mm. Integrated protection functions: -Overload protection -Overtemperature protection -Undervoltage protection -Diagnostic LED -Intelligent zero setting, no start-up protection -Can be used as universal servo electronics with adjustable control characteristics. -For servo operation, an additional potentiometer with 2kOhm or 5kOhm is required (NOT included!). No controller whistling (16KHz clocking) Instructions are available for downloading this article. Downloading is free! (except for your online costs). NEW ITEM - replaces the previous MFR!

Available immediately, delivery time: 1-4 days

Product number: 9181

€ 57,69 *

Subscriptions

Flat speaker 8 Ohm / 5W. For 12V operation. 90x40x14mm

1x flat speaker 8 Ohm/5W. For 12V operation. 90x40mm. Depth 14mm. For SMT, SMX and SM7 at 12V and SM3 at 7,2V. Loud89. Dimensions approx. 90x40x14mm. Loudspeaker boxes (not included) are available for this: Item 10826 or 11283 (for high roof) or 10828 (for AROCS high roof).

Available immediately, delivery time: 1-4 days

Product number: 9854

€ 13,70 *

Subscriptions

1x Motorhalter engines Pairing GM32-gear

1x motor bracket Suitable motors to GM32-gear. Universal bracket with bolts and nuts. Width 61,5mm to match Tamiya frame.

Available immediately, delivery time: 1-4 days

Product number: 6242

€ 10,59 *

Subscriptions

Infrared Kingpin matching Carson. With retaining clip

Infrared kingpin suitable for Carson. With retaining clip for AMO IR receiver diode. The diode is simply clicked in. Delivery without IR diode. KBC. For Carson trailers! For standard modular fifth wheel plate. Adjustments are necessary for Goldhofer semi-trailers and dump trucks. Does NOT fit flatbed trailers

Available immediately, delivery time: 1-4 days

Product number: 5361

€ 10,29 *

Subscriptions

Tip

1x Servonaut M24, speed controller with lighting system for trucks

Servonaut M24 speed controller with lighting system for trucks and functional models/vehicles. Speed controller for 7,2 to 12V and 20A/5 min. at 16 or 32 kHz clock frequency, BEC 5,3V/4A, lighting system with 6 switching outputs each 700mA, including instructions, dimensions approx. 43x13x80mm. Equally suitable for conventional motors and bell-armature motors. Instructions are available for downloading for this article. Downloading is free! (except for your online costs).

Available immediately, delivery time: 1-4 days

Product number: 9766

€ 198,99 *

Subscriptions

1x Servonaut S10 speed controller for small trucks and...

1x Servonaut S10 speed controller for small trucks and functional models/vehicles. Speed controller for 7,2 to 12V and 10A/5min at 16 kHz clock frequency. BEC 5V/1A. 2 switching outputs, 20mA each for brake light and reversing light. Incl. instructions, dimensions approx. 55x19x7mm. For small functional models. Integrated protective functions: - Overload protection - Overtemperature protection - Undervoltage protection Also suitable for bell-shaped armature motors! Seamless EMF brake, no loss of control when driving downhill. Delay-free changeover forwards/backwards. BEC: 5V/1A receiver supply. Diagnostic LEDs. Undervoltage shutdown for 6 or 10 cells NiMH and 2 or 3 cells LiPo. Automatic zero setting with start-up protection. Instructions are available for downloading this article. Downloading is free! (except your online costs).NEW article - improved follow-up article to the MFR!

Available immediately, delivery time: 1-4 days

Product number: 9192

€ 62,50 *

Subscriptions

1 UAT1 holder for underfloor drive. Motor holder

1 UAT1 holder for underfloor drive. Motor holder for Tamiya models with cardan shaft length > 100mm. For GM32 motors. The sheet thickness is: 2mm. This holder and a GM32 gear motor create a quiet, space-saving and almost backlash-free underfloor drive for Tamiya models. Replaces the standard three-speed gearbox. Very easy to install thanks to the special motor holder and driver. The driving speed with the GM32U360 or GM32U390 motors corresponds to the TM72 or TruckPuller2 in 1st gear. There is enough space for the correct arrangement of the tie rod. Set of motor holder and cardan driver. Dimensions: 69x62x40mm Suitable for Tamiya tractors with a long wheelbase, such as 2-axle vehicles with a European driver's cab and US three-axle vehicles with a long hood.

Available immediately, delivery time: 1-4 days

Product number: 7379

€ 25,60 *

Subscriptions

1x truck sound module SM7 with turbocharger 5 engines, 5

1x truck sound module SM7 with turbocharger 5 engines, 5 horns to choose from compressed air noise, siren, starting, stopping, gearshift noise. 7,2-12V. 7 watts. Successor to the SMX module! Sound module for truck models - successor to the proven SMX, significantly smallerDynamic turbocharger sound in a class of its own - even closer to the originalDriving situation-dependent engine sound with turbochargerIgnition, starter and shutdown noise, reversing warning tone5 truck horns, compressed air noises, siren5 engines: Actros V6, Scania V8, TGA in-line cylinder, DAF in-line 6-cylinder, Scania in-line 6-cylinderMulti-channel sound synthesisTurbocharger, compressed air, warning tone and switching noises can be set and adjusted separately in volume via Servonaut CARD (available as an accessory)Switching noises and warning tone with K15/30/40/60, reversing warning tone and brake-synchronized compressed air also available with M20+/M24 and S20/S22, function limited with speed controllers from other manufacturersStarter and horn can be operated optionally via switching inputs (Multiswitch) or a receiver channelSound module can be connected directly to an auxiliary motor or servo motor to simulate a power take-off noiseSmall separate volume control ideal for hidden installation on the modelFor 7,2V to 12V loudspeakers from 4 ohmsPower is supplied from the drive batteryWith battery plug (matching counterpart is BECB)Can be combined with SM+ for additional soundsOptional sound control SM-EQ available as an accessoryDimensions approx. 65 mm x 35 mm x 12 mmInstructions are available for download for this article. Downloading is free! (except for your online costs).Recommended loudspeakers with 7,2V supply voltage:Article 6049.Recommended loudspeakers with 12V supply voltage:Article 7028 or 9854.

Available immediately, delivery time: 1-4 days

Product number: 9066

€ 198,99 *

Subscriptions

2,4GHz receiver with 9 servo channels, RX9. Partner capable.

2,4GHz receiver with 9 servo channels. RX9. Partner capable. Supports up to 2 multi-switch or multiprop modules. Servo outputs can be switched on/off remotely. Monitoring of driving voltage without accessories. This receiver of the latest generation is the successor to the previous Servonaut receivers R9 and R12 and is of course completely compatible. This receiver can be expanded to 12 or 16 channels and can be linked to TWO HS-12/HS-16 transmitters. This makes it easy to hand over a model. Receiver 55x28x9mm (without antenna). Antenna length 13cm.Note:The multiswitch/multiprop systems from Robbe and Graupner are supported by this receiver.Supply voltage: 4,8 - 7,4VBattery monitoring: for NiCd/NiMH 6 or 10 cells, LiPo/LiFePo 2 to 4 cells.Servonaut receiver of the latest generation (2018).To match this RX9 receiver, inexpensive channel extensions to 12 or 16 channels are offered.Extension by 3 channels (so 12 channels in total): article 11137Extension by 7 channels (so 16 channels in total): article 11138Extended settings possible via CARD (article 9096) or the HS-12 and HS-16 transmitters.

Available immediately, delivery time: 1-4 days

Product number: 11136

€ 137,99 *

Subscriptions

1x miniature speaker Visaton 4 ohms

1x miniature speaker Visaton 4 Ohm for 7,2V operation. 4/8 watts. Diameter 45mm. Matching speaker box: Item 6050, 7814.

Available immediately, delivery time: 1-4 days

Product number: 6049

€ 22,49 *

Subscriptions

1x mini lighting system ML4 V2 with 4 functions on 4

1x mini lighting system ML4 V2 with 4 functions on 4 short-circuit-proof switching outputs 700mA/24V for indicators, breakdown indicators, parking lights and driving lights. As an extension for E20, T20, F30T, M212T, M220, also universally usable. The indicator can be switched off either manually or automatically after 5 seconds. Supply comes from the receiver with 4,8V to 6V. 1 free receiver channel required. Dimensions approx. 43x20x13mm. NEW in version 2.0: Can also be operated via multiswitch - XENON mode with xenon effect for low beam CLASSIC mode with incandescent lamp effects With battery plug, suitable for BECB - Instructions are available for downloading for this article. Downloading is free! (except for your online costs).

Available immediately, delivery time: 1-4 days

Product number: 9501

€ 43,99 *

Subscriptions

MB Actros / Arocs rear light board. LH6MB of Servonaut

MB Actros/Arocs rear light board. The new LH6 boards from Servonaut automatically adapt to the battery voltage and are therefore suitable for 7,2-12V. Does not fit Arocs 3348. Item 11047 fits here. 7 or 8 LEDs per side and a combination of light guides, color and diffuser discs, which are included in the scope of delivery, ensure even and complete illumination of the chambers in the rear lights. The LH6 boards can be combined with all common lighting systems that switch minus, i.e. work with a common positive pole. - for 7.2 to 12 volts, no conversion necessary when changing to 12V - 5 light functions: indicator, parking light (dimmed), brake light, rear fog and reversing light - good optics thanks to 2x7 LEDs and included light guides, diffuser and color discs - high-quality 100cm long cable with PTFE insulation - suitable for Actros/Arocs and Servonaut M20+/M24/ML4/LA10/K40 - universally suitable for all lighting systems with a common positive pole - Scope of delivery: 2 boards (1x left, 1x right), light guide, diffuser - Illustration shows assembled rear light with original Tamiya parts (not included)

Available immediately, delivery time: 1-4 days

Product number: 10305

€ 38,29 *

Subscriptions

1 steering servo mounting plate, black, for Tamiya. SVP

1 steering servo mounting plate, black, for Tamiya. Made of Delrin/POM. SVP. 58,5 x 59,5 x 3mm. Mounting plate for steering servo in standard size (cutout 42,5x21mm). Material thickness 3mm. Steering axle is installed rotated by 180° (tie rod to the rear!) Suitable for Tamiya frames. Useful in conjunction with underfloor drives.

Available immediately, delivery time: 1-4 days

Product number: 7348

€ 8,20 *

Subscriptions

Lighting system LA10 of Servonaut with 10 switching outputs

Lighting system LA10 from Servonaut with 10 switching outputs and IR transmitter. Outputs: Can be used with light bulbs or LEDs WITH series resistors. - Lighting system with 10 switching outputs and IR transmitter - Classic or Xenon light (jumper) - Parking, low beam, flasher and high beam - Indicators L/R and breakdown indicators - Front fog lights / cornering light and rear fog light - 2 extra outputs - IR transmitter for AMO trailer electronics already installed - 2 servo inputs for direct transmission to the trailer - Graupner Nautic and Robbe Multiswitch compatible - Adjustable via Prog-Card or Display-Card: 1. Cornering light 2. American tail light 3. Brightness of the outputs 4. Xenon and incandescent lamp intensity - Outputs 700mA, overload-proof - For battery voltages 7,2 to 12V - Dimensions approx. 52 x 32 x 15 mm - IR diode not included Matching transmitter diode: Article 10825 (with 3-pin socket). The CARD (Article 9096)!

Available immediately, delivery time: 1-4 days

Product number: 10304

€ 125,00 *

Subscriptions

1 transmitting diode (infrared). Spare part for AIRU (new), AIR4 (new

1 transmitting diode (infrared). Spare part for AIRU (new), AIR4 (new), LA10.

Available immediately, delivery time: 1-4 days

Product number: 10825

€ 5,34 *

Subscriptions

Arocs headlamp circuit boards (1 pair). Servonaut

Arocs headlight boards (1 pair). The new boards from Servonaut automatically adjust to the battery voltage and are therefore suitable for 7,2-12V. For Arocs from Tamiya. Left + right. These boards fit the Tamiya Arocs 3363/3348/4151. The boards are suitable for 7.2 to 12 V and do not need to be converted. The lighting functions include indicators, parking lights (dimmed), low beam, high beam, fog lights or fog/cornering lights on the MB Actros/Arocs and MAN TGX as well as daytime running lights on the Actros. Optimized light guides for each individual LED ensure excellent optics. A 40cm long cable with PTFE insulation is included in the delivery. The headlights fit Tamiya Scania, Tamiya Actros, Tamiya Arocs, and Tamiya MAN TGX. All of them are compatible with Servonaut M20+/M24/ML4/LA10/K40. They are also suitable for all lighting systems with a common positive pole and at least 100mA switching capacity.

Available immediately, delivery time: 1-4 days

Product number: 10544

€ 61,80 *

Subscriptions

RB35Plus67,12V gear motor 67 rpm. Alternative to

1x RB35Plus67,12VGeared motor 67rpm. Alternative to the RB35 standard but with approx. 30% more power. Motor data:Voltage: 12VPoles: 3Interference suppressed: internally pre-suppressedIdle speed: 6200 rpmIdle current: 120 mANominal speed: 5100 rpmNominal current: 470 mANominal torque: 0,6 NcmNominal power: 3,1 WShort-term max. load speed: 3100 rpmShort-term max. load current: 1000 mAShort-term max. load torque: 1,7 NcmShort-term max. load power: 5,2 WBlocking current: 2 ABlocking torque: 3,4 NcmData for motor with gearbox:Reduction ratio: 75:1Diameter: 37mmLength: 53,5 mmWeight: 175 gShaft diameter: 6mmIdle speed: 82 rpmNominal speed: 67 rpm.Nominal torque: 29 NcmShort-term max. load speed: 50 rpm.Short-term max. load torque: (132 Ncm)Max. torque: 90 Ncm

Available immediately, delivery time: 1-4 days

Product number: 7546

€ 28,30 *

Subscriptions

GM32U450, 12V planetary gear motor 450U / min. With a low,

GM32U450, 12V planetary gear motor 450 rpm. With quiet, robust planetary gear. As a drive motor for models in WDC/TAM scale with 3:1 or 4:1 axle reduction. Motor data:Voltage: 12VPoles: 5Interference suppression: yesIdle speed: 10000 rpmIdle current: 800 mANominal speed: 8700 rpmNominal current: 4,7 ANominal torque: 4,2 NcmNominal power: 38,0 WShort-term max. load speed: 5000 rpmShort-term max. load current: 15 AShort-term max. load torque: 16,5 NcmShort-term max. load power: 88 WBlocking current: 30 ABlocking torque: 33 NcmData for motor with gearbox:Reduction ratio: 19:1Diameter: 37mmLength: 88,8 mmWeight: 362 gShaft diameter: 6mmIdle speed: 520 rpmNominal speed: 450 rpm.Nominal torque: 54,9 NcmShort-term max. load speed: 260 rpm.Short-term max. load torque: 215 NcmMax. torque: 118 Ncm

Available immediately, delivery time: 1-4 days

Product number: 7109

€ 82,10 *

Subscriptions

1 CARD Servotester and programming card (Servonaut).

1 CARD servo tester and programming card (Servonaut). Dimensions: 83x58x7mm. Voltage: 4-12V. ATTENTION: Voltage must match the servo!!! Can be used as a servo tester, receiver tester and programming device (e.g. for TRIM module or SM7, LA10).

Available immediately, delivery time: 1-4 days

Product number: 9096

€ 32,00 *

Subscriptions

Infrared transmitter for wireless data transfer to AIR4

Infrared transmitter AIR4 for wireless data transmission to an AMO module in the trailer/semi-trailer. Is connected with a plug to Servonaut K15T/K30T/K60T or M12T/M20T/M20+/M24. Additionally with 1 or 2 plugs to free channels of the receiver. A total of 3 servos can be used in the trailer on M systems and 4 on K systems. Dimensions approx. 55x20x12mm. Incl. infrared diode. Instructions for this article are available for download. Downloading is free! (except for your online costs). An IR transmitter diode is included in the delivery. The IR transmitter diodes 6667 (old) and 10825 (new) are available as spare parts.

Available immediately, delivery time: 1-4 days

Product number: 5088

€ 52,49 *

Subscriptions

1x Servonaut G22 speed controller for trucks and

1x Servonaut G22 speed controller for trucks and functional models/vehicles. Speed controller for 7,2 to 12V and 20A/5min at 16 kHz clock frequency. BEC 5V/3A. 2 switching outputs, 700mA each for brake light and reversing light, control output for Servonaut sound modules, incl. Instructions, dimensions approx. 70x38x9mm.For functional models of size 1:16 to 1:8.Further development of the well-known S22 controller!The S22 is still available in its unchanged form!NEW: Simulates the driving dynamics and gear shifting of a 3- or 4-speed automatic.Can be driven with and without cruise control.Optimized for the Servonaut GM32 underfloor drives (U360, U390, U430 and U450)Realistic driving and gear shifting noises with all Servonaut sound modules.Resolution and sensitivity: 450 speed levels!Integrated protective functions:Overload protectionOvertemperature protectionUndervoltage protectionAlso suitable for bell-shaped armature motors!Seamless EMF braking, no loss of control when driving downhill. Delay-free change forward/backward.Powerful 5V/3A receiver supply with large cooling surface. Diagnostic LEDs.Undervoltage cut-off for 6 or 10 cells NiMH and 2 or 3 cells LiPo.Automatic zero setting with start-up protection.Occupies one channel (without cruise control) or 2 channels (with cruise control)Can be combined well with the lighting system LA10 (item 10304) or ML4 (item 9501).Instructions are available for downloading this article. Downloading is free! (except for your online costs).NEW article - with a replica of an automatic transmission! NOT suitable for use with a mechanical manual transmission!

Available immediately, delivery time: 1-4 days

Product number: 11383

€ 136,99 *

Subscriptions

RB35Plus51,12V gear motor 51 rpm. Alternative to

RB35Plus51,12V gear motor 51 rpm. Alternative to the RB35 standard but with approx. 30% more power. Motor data:Voltage: 12VPoles: 3Interference suppression: noIdle speed: 6200 rpmIdle current: 120 mANominal speed: 5100 rpmNominal current: 470 mANominal torque: 0,6 NcmNominal power: 3,1 WShort-term max. load speed: 3100 rpmShort-term max. load current: 1000 mAShort-term max. load torque: 1,7 NcmShort-term max. load power: 5,2 WBlocking current: 2 ABlocking torque: 3,4 NcmData for motor with gearbox:Reduction ratio: 100:1Diameter: 37mmLength: 53,5 mmWeight: 175 gShaft diameter: 6mmIdle speed: 62 rpmNominal speed: 51 rpm.Nominal torque: 40 NcmShort-term max. load speed: 31 rpm.Short-term max. load torque: (112 Ncm)Max. torque: 90 Ncm

Available immediately, delivery time: 1-4 days

Product number: 6184

€ 25,14 *

Subscriptions

1 UAT2 holder for underfloor drive. Motor holder

1 UAT2 holder for underfloor drive. Motor holder for Tamiya models with cardan shaft length up to 100mm. For GM32 motors. The sheet thickness is: 2mm. This holder and a GM32 gear motor create a quiet, space-saving and almost backlash-free underfloor drive for Tamiya models. Replaces the standard three-speed gearbox. Very easy installation thanks to the special motor mount and driver. The motor is lower. The driving speed with the GM32U360 or GM32U370 motors corresponds to the TM72 or TruckPuller2 in 1st gear. There is enough space for the correct arrangement of the tie rod. Set of motor mount and cardan driver. For tractors with a short front end (e.g. European 3-axle vehicles), the mount must be slightly raised so that the motor does not rest on the front axle. Suitable for all Tamiya tractors with a short wheelbase - the motor is slightly lower between the frame longitudinal members. (3-axle vehicles). Dimensions: 69x62x50mm

Available immediately, delivery time: 1-4 days

Product number: 7380

€ 25,69 *

Subscriptions

1 carrier for Tamiya cardan shaft, bore 6mm. Fitting

1 carrier for Tamiya-propeller shaft bore 6mm. Suitable for almost all GM32- gearmotors. With indoor 6kant- screw. Also suitable for RB35xx- gearmotors.

Available immediately, delivery time: 1-4 days

Product number: 8074

€ 6,95 *

Subscriptions

Sound control SM-EQ. Accessories for the SM3 and SM7 sound modules

Sound controller SM-EQ. Accessory for the sound modules SM3, SM7 and SMB. Allows you to adjust bass and treble for optimal sound. Dimensions: 24x14x8mm. The sound controller remains permanently connected to the corresponding sound module when in use.

Available immediately, delivery time: 1-4 days

Product number: 9078

€ 18,69 *

Subscriptions

1x mini MultiSwitch MM4 with 4 functions on 4

1x mini multiswitch MM4 with 4 functions on 4 short-circuit-proof switching outputs 700mA/24V and 2 additional servo outputs. Universally usable. Version 2! Supports e.g. combined headlight flasher with high beam and windshield wiper via a servo. Supply from the receiver with 4,8 or 6V. 1 free receiver channel required. Operation on the transmitter either via joystick or a button/switch with 3 positions. Dimensions approx. 43x20x13mm. NEW in version 2: Control also possible via multiswitch In multiswitch mode, a servo output can be controlled directly, e.g. for a 3-speed manual gearbox Instructions are available for download for this article. Downloading is free! (except for your online costs).

Available immediately, delivery time: 1-4 days

Product number: 9502

€ 43,99 *

Subscriptions

Infrared transmitter for wireless data transfer to Airu

Infrared transmitter AIRU for wireless data transmission to an AMO module in the trailer/semi-trailer. Universally usable for lighting systems and multi-switch systems with 6 outputs that switch to ground. Also suitable for Servonaut S10/S20/S22/T20/E20/E22/M212/M220, e.g. in conjunction with the mini lighting system ML4. 2 proportional channels are also transmitted. Dimensions approx. 40x32x15mm. Incl. infrared transmitter diode. Also suitable for multi-switch systems from other suppliers (also for MFC-01, MFC-02, MFC-03). Instructions for this article are available for download. Downloading is free! (except your online costs).An IR transmitter diode is included in the delivery.The IR transmitter diode is available as a spare part under article 6667 (old) and 10825 (new).Is not required if LA10 (article 10304) is present!

Available immediately, delivery time: 1-4 days

Product number: 5087

€ 69,00 *

Subscriptions

Servonaut M211 cruise control for function models

Servonaut M211 speed controller for functional models/tracked vehicles and ships. Speed controller for 7,2 to 14,4V. 16 kHz clock frequency. Over 450 speed levels. 60x32x10 mm size. 1A BEC. Compact dual speed controller for tracked vehicles and ships2x10A for 7,2V to 14,4V1A BECfurther improved special mixer that optimizes the steering behavior at full throttlethanks to the seamless Servonaut EMK brake, tracked vehicles can also be controlled perfectly downhillOutputs for brake light and reversing light with bulb simulation, 700mA each, short-circuit proofControl outputs for Servonaut sound modules16kHz clock frequency, very high resolution with >450 speed levelsTemperature, current, voltage and reception monitoring with engine stop in the event of faults or empty batteryPlug & Play, automatic detection of the driving voltage for 7,2V or 12V, 2s and 3s Lipoadditional setting options with the Servonaut CARDSwitching off the mixer so that the controllers can be used separatelyReverse travel optionally as with superposition gear or correct sideAdditional shutdown voltages for undervoltage detectionAcceleration, braking and steering behavior adjustable in several stagesOne connection socket for the power supply of accessories, e.g. for lighting system or soundVery flat, dimensions only approx. 60x32x10mm

Available immediately, delivery time: 1-4 days

Product number: 10847

€ 104,99 *

Subscriptions

RB35Power80,12V gear motor 80 U / min. Alternative to

RB35Power80,12V gear motor 80 rpm. Alternative to the RB35 standard but with approx. 3 times the power. Motor data:Voltage: 12VPoles: 5Interference suppression: 2x CLidling speed: 7300 rpmIdle current: 150 mANominal speed: 6000 rpmNominal current: 900 mANominal torque: 1,1 NcmNominal power: 7 WShort-term max. load speed: 3650 rpmShort-term max. load current: 2800 mAShort-term max. load torque: 4,25 NcmShort-term max. load power: 15,0 WBlocking current: 5,5 ABlocking torque: 8,5 NcmData for motor with gearbox:Reduction ratio: 75:1Diameter: 37mmLength: 71,1 mmWeight: 211 gShaft diameter: 6mmIdle speed: 97 rpmNominal speed: 80 rpm.Nominal torque: 54 NcmShort-term max. load speed: 49 rpm.Short-term max. load torque: (210 Ncm)Max. torque: 120 Ncm

Available immediately, delivery time: 1-4 days

Product number: 6186

€ 41,29 *

Subscriptions

1x TM72, Truck Engine 7,2V with soft start. 6000 U / min

1x TM72, truck motor 7,2V with soft start. 6000 rpm when idling. Very similar to the TruckPuller 7,2V. Identical mounting diagram. Motor data:Voltage: 7,2VPoles: 5Interference suppression: 3x CLidling speed: 6000 rpmIdle current: 720 mANominal speed: 5200 rpmNominal current: 2,86 ANominal torque: 2,65 NcmNominal power: 14,0 WShort-term max. load speed: 3000 rpmShort-term max. load current: 9500 mAShort-term max. load torque: 10,5 NcmShort-term max. load power: 32 WBlocking current: 19 ABlocking torque: 21 NcmDiameter: 37mmLength: 57 mmShaft length: 75mmWeight: 218 gShaft diameter: 3,17mm

Available immediately, delivery time: 1-4 days

Product number: 6238

€ 26,60 *

Subscriptions

BEC4 Servonaut. Newly developed power BEC. If the conve

BEC4 Servonaut. Newly developed power BEC. When the conventional BEC is not sufficient and gets hot. Dimensions: approx. 50x19x8mm. 5,4V or 6,1V nominal current 4A briefly up to 5,5A Newly developed high-quality power BEC, for power supply e.g. for models with 12V drive battery when the conventional BEC in the speed controller is not sufficient and gets too hot. Special feature: Is looped between a servo and the receiver, no free servo plug required on the receiver. Receiver and servo power supply from the drive battery very high efficiency due to switching regulator small and very flat due to modern components minimal interference, can also be combined with 40MHz receivers

Available immediately, delivery time: 1-4 days

Product number: 10703

€ 27,49 *

Subscriptions

2 LED Kabelbaumset REAR. For 7,2V. 8x 3mm LEDs with

2 LED wiring harness set, REAR. For 7,2V. 8x 3mm LEDs with series resistors for 7,2V, fully wired - common positive pole. L3H. Universal LED wiring harnesses for truck taillights. 2 identical sets for left and right. Each wiring harness 1x yellow/orange, 1x white, 2x red 3mm LED with series resistor for 7,2V voltage. Silicone hose as assembly aid for 5mm holes is included. Total length 70cm. Color coding: red = common positive pole green = tail light (red LED) yellow = indicator (yellow/orange LED) orange = reversing light (white LED) brown = brake light (red LED)

Available immediately, delivery time: 1-4 days

Product number: 7214

€ 28,49 *

Subscriptions

1x Servonaut E22 speed controller for trucks and

1x Servonaut E22 speed controller for trucks and functional models/vehicles. 20A speed controller for functional models in sizes 1:16 to 1:8 - Servonaut driving behavior with "cruise control" - Further development of the Servonaut E20 - Can also be combined well with lighting systems and sound modules from other suppliers - Universal control output for sound modules - NEW: Further improved resolution and sensitivity: Over 450 speed levels! - The inertia of a heavy vehicle is realistically reproduced - Seamless EMF brake, no loss of control when driving downhill - Powerful 5V/3A BEC receiver supply with large cooling surface - NEW: Undervoltage shutdown for 6 or 10 cells NiCd/NiMH, 2S or 3S lithium polymer with automatic recognition of the battery type - Continuous 16kHz clock frequency, also suitable for bell armature, no motor whistling - Temperature, current, voltage and reception monitoring with motor stop in the event of faults (at 40 MHz) or empty Battery- Two 700mA outputs for brake light and reversing light, overload and short-circuit proof for LEDs and/or bulbs- Realistic brake light when braking forwards and backwards- Automatic zero setting with start-up protection- No learning or adjustment required, occupies two channels- NEW: Two diagnostic LEDs for status and error display- NEW: Dimensions only approx. 70 x 38 x 9 mm

Available immediately, delivery time: 1-4 days

Product number: 10094

€ 111,99 *

Subscriptions

Actros headlamp circuit boards (1 pair). Servonaut

Actros headlight boards (1 pair). The new boards from Servonaut automatically adapt to the battery voltage and are therefore suitable for 7,2-12V. For Actros from Tamiya. Left + right. The boards are suitable for 7.2 to 12 V and do not need to be converted. The lighting functions include indicators, parking lights (dimmed), low beam, high beam, fog lights or fog/cornering lights on the MB Actros/Arocs and MAN TGX as well as daytime running lights on the Actros. Optimized light guides for each individual LED ensure excellent optics. The scope of delivery includes a 40cm long cable with PTFE insulation. The headlights are suitable for Tamiya Scania, Tamiya Actros, Tamiya Arocs, and Tamiya MAN TGX. All of them are compatible with Servonaut M20+/M24/ML4/LA10/K40. They are also suitable for all lighting systems with a common positive pole and at least 100mA switching capacity.

Available immediately, delivery time: 1-4 days

Product number: 10463

€ 61,80 *

Subscriptions

Tip

Volvo FH16 backlight blanks. (1 pair) The new LH6 Plati

Volvo FH16 tail light boards. (1 pair) The new LH6 boards from Servonaut automatically adjust to the battery voltage and are therefore suitable for 7,2-12V. Only suitable for Tamiya Volvo FH16! A large number of LEDs per side and a combination of light guides and diffusers, which are included in the delivery, ensure even and complete illumination of the chambers in the tail lights. The LH6 boards can be combined with all common lighting systems that switch minus, ie work with a common positive pole. for 7.2 to 12 volts, no conversion necessary when changing to 12V extends the tail lights to 5 chambers, no drilling or sanding necessary 5 light functions: indicator, parking light (dimmed), brake light, rear fog light and reversing light dynamic indicators (2 steps) good optics thanks to lots of LEDs and included light guides, color and diffuser lenses high-quality 100cm long cable with PTFE insulation suitable for Volvo FH16 and Servonaut M20+/M24/ML4/LA10/K40 universally suitable for all lighting systems with a common positive pole Scope of delivery: 2 circuit boards (1x left, 1x right), light guide, diffuser lenses Attention small parts! Assembly requires some experience in model making Illustration shows assembled tail light with original Tamiya parts (not included) NOT suitable for connection to the MFCxx from Tamiya! Can be pre-ordered now.

Available immediately, delivery time: 1-4 days

Product number: 11471

€ 50,60 *

Subscriptions

1 volume control for sound module SMX with Servocable

1 volume control for sound modules from Servonaut with servo cable. 5kOhm linear.

Available immediately, delivery time: 1-4 days

Product number: 7657

€ 4,30 *

Subscriptions

1x speaker Box45-THD, plywood. Approximately 140x95x21mm

1x loudspeaker box Box45-THD, plywood. Approx. 140x95x21mm. For European Tamiya driver's cabs. For speakers approx. 45mm. Installation frame kit made of 3mm plywood parts. Suitable for the mini speaker 45 (item 6049). The frame is simply put together and glued. Suitable for driver's cabs (Tamiya) MAN, Volvo, Scania. Frame is screwed into the roof from below. With screws and seal. Loudspeaker is NOT included. Suitable loudspeaker: item 6049.

Available immediately, delivery time: 1-4 days

Product number: 7814

€ 15,99 *

Subscriptions

1 IR receiver. Infrared receiver for AMO

1 IR receiver. Infrared receiver for AMO.

Available immediately, delivery time: 1-4 days

Product number: 6668

€ 8,45 *

Subscriptions

1 transmitting diode (infrared). Spare parts for AIR, Airu, AIR4,

1 transmission diode (infrared). Spare part for AIR, AIRU, AIR4, AIR7. This transmitter diode is for the older versions! The transmitter diode with article number 4 is available for the current module versions of AIR10, AIRU and LA10825.

Available immediately, delivery time: 1-4 days

Product number: 6667

€ 5,19 *

Subscriptions

Servonaut Scania headlamp boards (1 pair) 7,2-12 V

Scania headlight boards (1 pair). The new boards from Servonaut automatically adapt to the battery voltage and are therefore suitable for 7,2-12V. For Scanias from Tamiya. Left + right. Suitable for the Scania models R470, R620 (all versions). Not suitable for Scania 770S. The boards are suitable for 7.2 to 12 V and do not need to be converted. The lighting functions include indicators, parking lights (dimmed), low beam, high beam, fog lights or fog/cornering lights on the MB Actros/Arocs and MAN TGX as well as daytime running lights on the Actros. Optimized light guides for each individual LED ensure excellent optics. A 40cm long cable with PTFE insulation is included in the delivery. The headlights are suitable for Tamiya Scania, Tamiya Actros, Tamiya Arocs, and Tamiya MAN TGX. All of them are compatible with Servonaut M20+/M24/ML4/LA10/K40. They are also suitable for all lighting systems with a common positive pole and at least 100mA switching capacity.

Available immediately, delivery time: 1-4 days

Product number: 10393

€ 59,50 *

Subscriptions

1x Loudspeaker THD89AR, MDF. Approximately 100x89. Kit.

1x loudspeaker box THD89AR, MDF. Approx. 100x89. Kit. -Servonaut-. For loudspeaker 89. For AROCS driver's cab. Installation frame kit made of 3mm MDF material. Suitable for the mini loudspeaker 89 (item 9854). The frame is simply put together and glued. Suitable for the driver's cab (Tamiya) AROCS. Frame is screwed into the roof from below. With screws and seal. Loudspeaker is NOT included.

Available immediately, delivery time: 1-4 days

Product number: 10828

€ 15,99 *

Subscriptions

Servonaut geared motor RB35Power120

RB35Power120,12V gear motor 120 U / min. Alternative to RB35 standard but with about 3-fold power.

Available immediately, delivery time: 1-4 days

Product number: 11215

€ 41,29 *

Subscriptions

GM32U450-VTG 12V planetary gear motor 450rpm. With

GM32U450-VTG 12V planetary gear motor 450 rpm. With quiet, robust planetary gear. As a drive motor for models with underfloor drive. WITH DISTRIBUTION GEAR! Permanent, not switchable. Motor data:Voltage: 12VPoles: 5Interference suppression: yesIdle speed: 10.000 rpmIdle current: 800 mANominal speed: 8.700 rpmNominal current: 4,7 ANominal torque: 4,2 NcmNominal power: 38,0 WShort-term max. load speed: 5000 rpmShort-term max. load current: 15 AShort-term max. load torque: 16,5 NcmShort-term max. load power: 88 WBlocking current: 30 ABlocking torque: 33 NcmData for motor with gearbox:Reduction ratio: 14:1Diameter: 37mmLength: 85,6 mmWidth of distribution block: 32mmWeight: 362 gShaft diameter: 5mmIdle speed: 520 rpmNominal speed: 450 rpm.Nominal torque: 54,9 NcmShort-term max. load torque: 88 NcmMax. torque: 120 NcmSupplied fully assembled with mounting bracket.Shaft outputs: 5mm diameter.

Available immediately, delivery time: 1-4 days

Product number: 7883

€ 172,99 *

Subscriptions

MAN TGX taillight board. LH6TX boards of Servonaut

MAN TGX rear light board. The new LH6 boards from Servonaut automatically adapt to the battery voltage and are therefore suitable for 7,2-12V. 7 or 8 LEDs per side and a combination of light guides, color and diffuser discs, which are included in the scope of delivery, ensure even and complete illumination of the chambers in the rear lights.The LH6 boards can be combined with all common lighting systems that switch minus, i.e. work with a common positive pole.- for 7.2 to 12 volts, no conversion necessary when changing to 12V- 5 light functions: indicator, parking light (dimmed), brake light, rear fog and reversing light- extends the rear lights to 5 chambers, no drilling or sanding- good optics thanks to 2x7 LEDs and included light guides, diffuser and color discs- high-quality 100cm long cable with PTFE insulation- suitable for Tamiya MAN TGX and Servonaut M20+/M24/ML4/LA10/K40 - universally suitable for all lighting systems with a common positive pole- scope of delivery: 2 boards (1x left, 1x right), Light guide, diffuser - Illustration shows assembled rear light with original Tamiya parts (not included)

Available immediately, delivery time: 1-4 days

Product number: 10309

€ 41,59 *

Subscriptions

Servonaut sound module for wheel loader and crawler SMR

Sound module for wheel loader and crawler SMR. Space-saving installation with 55x28x13 mm. Dynamic, situation-dependent sounds. 7,2 - 12V. 2 free reception channels required! Space-saving installationDynamic, situation-dependent soundsDynamic engine noise, hydraulics, starter, shutdown, horn, dynamic drive chainCan be controlled via two free receiver channelsNo additional battery required, can be powered directly from the drive batteryBattery voltage 7,2 to 12V NiCd/NiMH, loudspeaker from 8 ohmsMaximum output power 3 watts at 8 ohms at 7,2 VSmall, separate volume control ideal for hidden installation on the modelOptional sound control SM-EQ available as an accessoryDimensions in mm approx. 55 x 28 x 13Important: The SMR requires a transmitter with extensive mixing functions to control all functions - at least one free mixer on the sound output for each valve servo channel and, if necessary, another for pump control. Of course, the Servonaut HS12/HS16 meets this requirement, as do transmitters from Brixl, Blauzahn or ScaleART Commander. The SMR may not be usable or may only be usable to a limited extent with transmitters from model aircraft - be sure to check beforehand!

Available immediately, delivery time: 1-4 days

Product number: 10850

€ 185,00 *

Subscriptions

2 LED Kabelbaumset FRONT. For 7,2V. 10 3mm LEDs with

2 LED wiring harness set, FRONT. For 7,2V. 10 3mm LEDs with series resistors for 7,2V, fully wired - common positive pole. L3V. Universal LED wiring harnesses for truck front lights. 2 identical sets for left and right. Each wiring harness 1x yellow/orange, 4x white, 3mm LED with series resistor for 7,2V voltage. Silicone hose as assembly aid for 5mm holes is included. Total length 45cm. Color coding: red = common positive pole blue = driving light (low beam) green = parking light yellow = indicator (yellow/orange LED) violet = high beam white = fog light

Available immediately, delivery time: 1-4 days

Product number: 7213

€ 39,89 *

Subscriptions

Volvo FH16 headlight boards (1 pair) The new boards

Volvo FH16 headlight circuit boards (1 pair) The new circuit boards from Servonaut automatically adapt to the battery voltage and are therefore suitable for 7,2-12V. For Volvo FH16 from Tamiya. Left + right. The circuit boards are suitable for 7.2 to 12 V and do not need to be converted. The lighting functions include indicators, parking lights, low beam, high beam, fog lights, cornering lights. Special feature: Daytime running lights in 2 brightness levels, side indicators Prepared for side marker lights Suitable for the Tamiya Volvo FH16 (item 11352) The circuit boards are compatible with Servonaut M20+ / M24 / ML4 / LA10 / K40. They are also suitable for all lighting systems with a common positive pole and at least 100mA switching capacity. Scope of delivery: 2 circuit boards with light insert and wiring harness, light guide, diffusers Attention: Drilling and sanding work required.

Available immediately, delivery time: 1-4 days

Product number: 11622

€ 106,40 *

Subscriptions

Scania taillight board. LH6SC boards of Servonaut

Scania tail light board. The new LH6 boards from Servonaut automatically adapt to the battery voltage and are therefore suitable for 7,2-12V. For R470 and R620. 7 or 8 LEDs per side and a combination of light guides, color and diffuser discs, which are included in the scope of delivery, ensure even and complete illumination of the chambers in the rear lights.The LH6 boards can be combined with all common lighting systems that switch minus, i.e. work with a common positive pole.- for 7.2 to 12 volts, no conversion necessary when changing to 12V- 5 light functions: indicator, parking light (dimmed), brake light, rear fog and reversing light- extends the rear lights to 5 chambers, no drilling or sanding- good optics thanks to 2x8 LEDs and included light guides, diffuser and color discs- high-quality 100cm long cable with PTFE insulation- suitable for Tamiya Scania and Servonaut M20+/M24/ML4/LA10/K40- universally suitable for all lighting systems with a common positive pole- scope of delivery: 2 boards (1x left, 1x right), light guide, Diffuser - Image shows assembled tail light with original Tamiya parts (not included) Suitable for Tamiya R470 and R620.

Available immediately, delivery time: 1-4 days

Product number: 10306

€ 47,29 *

Subscriptions

Interior fitting aluminum mounting bracket for Scania from Tamiya. For

1 interior aluminum mounting bracket for Scania from Tamiya. INTAS. For concealed installation of electronic components, with engine cover, self-adhesive velour carpet imitation in gray and black. Suitable for the Tamiya models: R470, R620Total width: 169mmHeight: 107mmDepth: 80mmMaterial thickness: 1mmDimensions of aluminum cover: 45x46x13mmSelf-adhesive velour in gray and black is included.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 7639

€ 35,30 *

Subscriptions

PAGE