7-chamber rear light unit (1 pair) without circuit board. Overall dimensions: 32x12x7mm The base body is chrome-plated on the inside. (500907037) Instructions can be downloaded here. Suitable lighting circuit boards in SMD technology can be found under item number 3103 (for 12V) or 3104 (for 7,2V) or 3105 (for 4,8V). Also the lighting set for Carson trailers, item 7786. When using the lighting circuit boards (not included), the following lighting functions are possible. (suitable control required).Tail lightBrake lightReverse lightIndicator/hazard warning lightsRear fog light
Low loader tire, 1 piece, solid rubber, 59 x 29 x 16mm (outside x inside x wide) Fulda Ecotonn 245/70 R 17.5. Scope of delivery: 1 piece. Article has been replaced by successor article 10496. Matching rims: made of plastic: article 1911, 3821, 4365, 5113, 8544, 8864. made of aluminum: article 7978, 8198, 8822.
2x orange marker lights, suitable for 1/14 scale from 7,2-12 V. Made of plastic with glued-in SMD LED. LxWxH: 8x4x1,2mm collar: 3,2x2mm 500907382 200mm cable length. Incl. 2 resistors
2 rectangular headlights with LED lighting for 12V. (207078). Housing made of plastic. Light disc grooved. Dimensions approx. 8,5x8,5x7mm. Total height with base approx. 14mm. Mounting base 2mm diameter 50090757 12V versionIdeal for front and rear lighting for the Carson LR634 track loader.Scope of delivery2 housings, black2 light discs, clear, grooved2 resistors with 510 Ohm are included.2 lighting boards with approx. 20cm cableInstructions
1x spray paint can 100ml, black, satin finish. TS-29. Acrylic paint spray for plastic, wood, metal, glass and ceramics. This paint spray is very handy and, thanks to its content and size, is suitable for spraying models. As it is made from paint, its drying time is short. The can contains 100 ml. With 2-4 of these cans (depending on the opacity of the paint) a Tamiya truck cab can be painted. Tamiya paint sprays are not affected by acrylic or enamel paints. After spraying the entire model surface with paint spray, details can be painted with acrylic or enamel paints. By combining three types of paint, colorful paints can be produced easily and reliably.Contents: 100 mlSignal word DangerHazard statements:H222 Extremely flammable aerosol.H229 Pressurized container: may burst if heated.H315 Causes skin irritation.H318 Causes serious eye damage.H335 May cause respiratory irritation.H336 May cause drowsiness or dizziness.EUH066 Repeated exposure may cause skin dryness or cracking.Safety statements:P102 Keep out of reach of childrenP210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211 Do not spray on an open flame or other ignition source.P251 Do not pierce or burn, even after use.P261 Avoid breathing gas/mist/vapours/spray.P271 Use only outdoors or in a well-ventilated area.P280 Wear protective gloves/protective clothing/eye protection/face protectionP302+P352 IF ON SKIN: Wash with plenty of water/acetone.P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.P310 Immediately call a POISON CENTER or doctor/physician.P332+P313 If skin irritation occurs: Get medical advice/attention.P362+P364 Take off contaminated clothing and wash before reuse.P405 Store locked up.P410+412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.Warning! Not suitable for children under 14 years.
1 new/untreated EPAL Euro pallet in 1:14,5 scale. Matching the Wedico scale. Handcrafted from untreated pinewood. With original EPAL and EURO branding stamps. 83x55x10mm. EPAL Euro pallet. The pallet is sawn all around and not sanded - like the original! Dimensions: 83 x 55 x 10 mm We only have this item in stock in small quantities! The delivery time can therefore be around 3 weeks!
1 tie rod, bent, steel. Improves the steering behavior. Suitable for all Tamiya Euro tractors. (500013516). Overall length 105mm with each M3 thread on both ends.
1x spray paint can 100ml, clear varnish, glossy. TS-13. Acrylic paint spray for plastic, wood, metal, glass and ceramic. This paint spray is very handy and, thanks to its content and size, is suitable for spraying models. As it is made from a paint base, its drying time is short. The can contains 100 ml. With 2-4 of these cans (depending on the opacity of the paint) a Tamiya truck cab can be painted. Tamiya paint sprays are not affected by acrylic or enamel paints. After spraying the entire model surface with paint spray, details can be painted with acrylic or enamel paints. By combining three types of paint, colorful paints can be produced easily and reliably.Contents: 100 mlSignal word DangerHazard statements:H222 Extremely flammable aerosol.H229 Pressurized container: may burst if heated.H315 Causes skin irritation.H318 Causes serious eye damage.H335 May cause respiratory irritation.H336 May cause drowsiness or dizziness.EUH066 Repeated exposure may cause skin dryness or cracking.Safety statements:P102 Keep out of reach of childrenP210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211 Do not spray on an open flame or other ignition source.P251 Do not pierce or burn, even after use.P261 Avoid breathing gas/mist/vapours/spray.P271 Use only outdoors or in a well-ventilated area.P280 Wear protective gloves/protective clothing/eye protection/face protectionP302+P352 IF ON SKIN: Wash with plenty of water/acetone.P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.P310 Immediately call a POISON CENTER or doctor/physician.P332+P313 If skin irritation occurs: Get medical advice/attention.P362+P364 Take off contaminated clothing and wash before reuse.P405 Store locked up.P410+412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.Warning! Not suitable for children under 14 years.
2 rectangular headlights with LED lighting, 7,2V. Plastic housing, grooved light disc. Housing approx. 8,5x8,5x7 mm. Total height with base approx. 14mm. Mounting base 2mm diameter 50090714 7,2V versionIdeal for front and rear lighting for the Carson LR634 track loader.Scope of delivery2 housings, black2 light discs, clear, grooved2 resistors with 220 Ohm are included.2 lighting boards with approx. 20cm cableInstructions
1x spray paint can 100ml, black, glossy. TS-14. Acrylic paint spray for plastic, wood, metal, glass and ceramic. This paint spray is very handy and, thanks to its content and size, is suitable for spraying models. As it is made from paint, its drying time is short. The can contains 100 ml. With 2-4 of these cans (depending on the opacity of the paint), a Tamiya truck cab can be painted. Tamiya paint sprays are not affected by acrylic or enamel paints. After spraying the entire model surface with paint spray, details can be painted with acrylic or enamel paints. By combining three types of paint, colorful paints can be produced easily and reliably.Contents: 100 mlSignal word DangerHazard statements:H222 Extremely flammable aerosol.H229 Pressurized container: may burst if heated.H315 Causes skin irritation.H318 Causes serious eye damage.H335 May cause respiratory irritation.H336 May cause drowsiness or dizziness.EUH066 Repeated exposure may cause skin dryness or cracking.Safety statements:P102 Keep out of reach of childrenP210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211 Do not spray on an open flame or other ignition source.P251 Do not pierce or burn, even after use.P261 Avoid breathing gas/mist/vapours/spray.P271 Use only outdoors or in a well-ventilated area.P280 Wear protective gloves/protective clothing/eye protection/face protectionP302+P352 IF ON SKIN: Wash with plenty of water/acetone.P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.P310 Immediately call a POISON CENTER or doctor/physician.P332+P313 If skin irritation occurs: Get medical advice/attention.P362+P364 Take off contaminated clothing and wash before reuse.P405 Store locked up.P410+412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.Warning! Not suitable for children under 14 years.
1 injection molded parts set F-parts, white. For Scania from Tamiya. Unpainted. 309005842. High roof and spoiler for Scania. This parts set fits the following Tamiya models:-Scania R470 Highline-Scania R620 HighlineThe injection molded part contains the parts:(unpainted)High roofSpoiler
1x spray primer 180ml, fine white. Well-covering primer for plastic and metal. Spray can with spray head, 180ml capacity. 87044/XNUMX RC Crawler Car XNUMXGhz XNUMXWD Off-Road Vehicle. Superfine spray primer - the first step to perfect painting. High coverage and adhesion without covering the model details. The primer evens out light scratches and unevenness. This is available in different container sizes (100ml/180ml) and colors.The primers are suitable for the following surfaces/materials: plastic (ABS, polystyrene (PS)), metal (steel, aluminum, die-cast (zinc die-cast)), wood, ceramic.The primed surface can also be wet-coated or painted before the paint is applied. be sanded. For this purpose we recommend TAMIYA sandpaper and sanding sponges, which can be used dry and wet and are available in grits from 320 to 3.200. TIP: Basics for selecting primers: White primers are ideal for light paint/varnish applications and light grey or dark grey colours. Grey primer for dark paintwork/colour applications.When painting red tones (e.g. TS-8 Italian Red) to prepare the model with the primer Pink (300087146), this allows the subsequent red tone on the model to shine more strongly and with more depth. Do you want to age the model, weather it or with signs of wear, it is recommended to use the primer oxide red (300087160). If you remove and/or scratch the subsequently applied paint, the effect of rust or rust spots will occur. fallen pieces of paint.Signal word DangerHazard statements:H222 Extremely flammable aerosol.H229 Pressurized container: may burst if heated.H315 Causes skin irritation.H318 Causes serious eye damage.H335 May cause respiratory irritation.H336 May cause drowsiness or dizziness.Safety statementsP102 Keep out of the reach of children.P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211 Do not spray on an open flame or other ignition source.P251 Do not pierce or burn, even after use.P261 Avoid breathing gas/mist/vapors/spray.P271 Use only outdoors or in a well-ventilated area.P280 Wear protective gloves/protective clothing/eye protection/face protection.P302+P352 IF ON SKIN: Wash with acetone and plenty of water.P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.P310 Immediately call a POISON CENTER or doctor/physician.P332+P313 If skin irritation occurs: Get medical advice/attention.P362+P364 Take off contaminated clothing and wash before reuse.P405 Store locked up.P410+412 Protect from sun exposure. Do not expose to temperatures above 50 °C/122 °F.Caution!
3-chamber rear light unit (1 pair) round with red/orange light discs, ALU base body 11mm diameter. Slot width for LEDs 2,2mm! 500907039. Item number 5641 (12V) or 3817 (7,2V with series resistor if necessary) is suitable as a light source. Both bulbs can be used lying down for the indicator light (middle) or standing up for the brake and tail light (top and bottom). For those who like low power consumption, we offer SMD LEDs with soldered wires under item numbers 6341 (red) and 6340/6342 (white)! These LEDs can be used almost anywhere in model making due to their very small size of just 2x1,25mm. In addition, the annoying fiddling around of soldering the wires to these tiny things is no longer necessary! Fastened using a central M2 screw. 4 holes with a 2mm diameter for the wires to pass through. Tip: We recommend that you first mount the red light discs on the aluminum base body and only then carefully separate the outer spray edge. This can prevent the thin connecting bridge between the red parts from breaking. The light discs are available separately as replacement items under item number 3407 if required.
1x driven rear axle with self-locking differential with/without through-drive. Tamiya scale. Officially licensed by ZF Friedrichshafen AG. 500907268 The CARSON drive concept for TAMIYA trucks in 1:14 scale. Convert your TAMIYA 2- or 3-axle TAMIYA tractor into an all-rounder with our self-locking axles. The components can be easily replaced as they are attached to the existing mounting points. A huge advantage of these axles is that no additional space is needed for a switching servo (linkages and Bowden cables), as they lock independently/automatically in the event of a loss of traction. Officially licensed by ZF Friedrichshafen AG.You decide how you want to convert your 2- or 3-axle tractor, this is possible in two stages:Configuration options for:2-axle tractors:Mercedes-Benz Actros Gigaspace 1845, MAN TGX 18.540, SCANIA R470, VOLVO FH12, Mercedes-Benz 1838LS, Mercedes-Benz 18501, 4x2 rear axle drive (with self-locking differential)- TAMIYA® 3-speed manual transmission (modular kit) with a CARSON rear axle (self-locking)2, 4x4 all-wheel drive with 2+2 speed transmission (front axle/rear axle/transfer case self-locking)- CARSON 2-speed manual transmission Compact in conjunction with the CARSON 2-speed transfer case torque compensation (self-locking), driven front axle (self-locking), rear axle (self-locking), drive shaft set 4x4.3-axle tractor: Mercedes-Benz Actros 3363, MAN TGX 26.540, SCANIA R620)1, 6x4 rear axle drive (with self-locking differential)- TAMIYA® 3-speed manual transmission (modular system) with two CARSON rear axles (self-locking), drive shaft set 6x4.2, 6x6 all-wheel drive with 2+2 speed transmission (front axle / rear axle / transfer case self-locking)- CARSON 2-speed manual transmission Compact in conjunction with the CARSON 2-speed transfer case torque compensation (self-locking), driven front axle (self-locking), two rear axles (self-locking), drive shaft set 6x6. CARSON rear axle with self-locking differentialDetailed rear axle for TAMIYA model trucks in 1:14 scale. The axle is equipped with a self-locking differential and can be built with or without a through drive; both shafts and housing covers are included in the scope of delivery. If traction is lost, the differential locks independently/automatically and generates 100% traction. A big advantage of this drive axle is that NO shift servos, Bowden cables and linkages are required for the differential locks, which also benefits the clarity and space available in the chassis. The axle components are housed in a heavy-duty reinforced plastic axle housing. Furthermore, the rear axle can also be operated in conjunction with the standard TAMIYA 3-speed manual transmission; only the 3x6 drive shaft set (4) must be used for the 500907279-axle tractors. - True to detail rear axle - Reinforced plastic axle housing - High ground clearance thanks to a "slim" differential housing (height 33 mm) - 12-fold ball bearing - Hardened steel bevel gears - Axle ratio 1:2,66 - 5 mm transmission/input shaft - Aluminum rim driver 12 mm hexagon - Easy conversion to an axle with and without through-drive (both shafts and housing cover are included in the axle kit) - Dimensions rear axle LxWxH: 44 x 135 x 33 mm - Weight approx.
1 ball bearing set for Tamiya 3-axle trucks, such as Scania620, MAN TGX and Freightliner CASCADIA, Actros 3363, Arocs 3363, Volvo FH16, Scania770, 32 pieces. Contains the following ball bearings: 27 pieces 11x5x4mm (888) 4 pieces 12x6x4mm (890) 1 piece 8x5x2,5mm (891) Suitable and recommended for all Tamiya 3-axle tractors.
1x towing eye, plastic, black, operated by servo. Bolt closes automatically via spring. With drawbar piece. Jaw dimensions: 30x17mm. Total height 30mm. With small fastening parts. (907182). Dimensions of the towing eye:Total length of drawbar piece: 52mmThickness of the towing eye: 4mmOuter diameter of eyelet: 9,5mmInner diameter of eyelet: 4,3mmConvex towing bolt, max. outer diameter 4mmPressure spring closes the towing bolt without being actuated by a servo. To open the towing bolt, the servo must exert a pulling force against the spring pressure.Other drawbar pieces available: Article 8429.
1x spray primer 180ml, fine grey. Well-covering primer for plastic and metal. (87042) Spray can with spray head, 180ml capacity. 87042/XNUMX RC Crawler Car XNUMXGhz XNUMXWD Off-Road Vehicle. Superfine spray primer - the first step to perfect painting. High coverage and adhesion without covering the model details. The primer evens out light scratches and unevenness. This is available in different container sizes (100ml/180ml) and colors.The primers are suitable for the following surfaces/materials: plastic (ABS, polystyrene (PS)), metal (steel, aluminum, die-cast (zinc die-cast)), wood, ceramic.The primed surface can also be wet-coated or painted before the paint is applied. be sanded. For this purpose we recommend TAMIYA sandpaper and sanding sponges, which can be used dry and wet and are available in grits from 320 to 3.200. TIP: Basics for selecting primers: White primers are ideal for light paint/varnish applications and light grey or dark grey colours. Grey primer for dark paintwork/colour applications.When painting red tones (e.g. TS-8 Italian Red) to prepare the model with the primer Pink (300087146), this allows the subsequent red tone on the model to shine more strongly and with more depth. Do you want to age the model, weather it or with signs of wear, it is recommended to use the primer oxide red (300087160). If you remove and/or scratch the subsequently applied paint, the effect of rust or rust spots will occur. fallen pieces of paint.Signal word DangerHazard statements:H222 Extremely flammable aerosol.H229 Pressurized container: may burst if heated.H315 Causes skin irritation.H318 Causes serious eye damage.H335 May cause respiratory irritation.H336 May cause drowsiness or dizziness.Safety statementsP102 Keep out of the reach of children.P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211 Do not spray on an open flame or other ignition source.P251 Do not pierce or burn, even after use.P261 Avoid breathing gas/mist/vapors/spray.P271 Use only outdoors or in a well-ventilated area.P280 Wear protective gloves/protective clothing/eye protection/face protection.P302+P352 IF ON SKIN: Wash with acetone and plenty of water.P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.P310 Immediately call a POISON CENTER or doctor/physician.P332+P313 If skin irritation occurs: Get medical advice/attention.P362+P364 Take off contaminated clothing and wash before reuse.P405 Store locked up.P410+412 Protect from sun exposure. Do not expose to temperatures above 50 °C/122 °F.Caution!
1x standard servo CS-3 with JR connector. Dimensions: 38,5x19x32mm. 4,8-6V voltage. Actuating torque at 4,8V: 31Ncm. Actuating time approx. 0,17sec./60°. Weight 39 g. Accessories: 2 rudder levers and screws.
2 Aluminum U-profile, 1m long, 21x7x1,5mm Material thickness 1,5 mm, made of plain aluminum. Rounded edges. Dimensions correspond to the Tamiya frame profile. (500907063) .2x 1m piece.
CARSON Reflex Stick Multi Pro LCD 2,4GHz remote control with 14 channels. 14-channel transmitter, 14-channel receiver and manual. With 15 model memories. Reflex Stick Multi Pro LCD - Professional, modern and technically high-quality 14-channel remote control system with 15 model memories for universal use in many RC vehicles and ships. 14 channels can be controlled independently via 2 joysticks and 10 switches (4x buttons / 4x step switches / 2x rotary potentiometers), for example functions such as light / sound, horn, cable winch, support legs, water pump and fire monitor.The REFLEX STICK Multi Pro 14 Channel LCD System is fully compatible with the MFC 01/03 and DMD unit from TAMIYA. Scope of delivery:14 channel 2.4 GHz transmitter, 14 channel 2.4 GHz receiver and multilingual manual.Required accessories:4x Mignon AA cells. Mignon battery set article 9492Recommended accessories:500503060 Reflex 6 / 14Ch Switch 2 (2x2.5A, max. 16V)500503061 Reflex 6 / 14Ch Switch 4 (4x2.5A, max. 16V)500503062 Reflex Switch 2/4 power distributor500606073 Plug-in charger (item 10723)Transmitter charging cable: item 9673500501544 Receiver500609042 Mignon battery set (AA)Technical data:- Operating voltage transmitter 4,8 - 6 V (4 AA cells)- 2.4G FHSS system (Frequency HoppingSpread Spectrum)- 2.4G servo reverse (reversal of the direction of rotation) and trim function for channels- 4x buttons ON/OFF/ON, 4x switches ON/OFF/ON, 2x rotary potentiometers- Power supply for the receiver 4,8 - 6 V- Plug system Graupner J/R- Dual Rate channel 1-4 (servo travel limitation)- EPA channel 1-4 (servo travel limitation)- ABS function channel 1-4 (Stutter brake)- EXP function channel 1-4 (exponential)Technical details:- 14 controllable channels- 15 model memories- Includes charging socket- 100% compatible with TAMIYA MFC 01/03 and DMD unit- Blue illuminated LC displayIt is not possible to bind several receivers at the same time with this system.Receivers that can be used with this system:Article 11259, 4-channel receiverArticle 12422, 4-channel receiver, waterproofArticle 12421, 5-channel receiverArticle 12420, 5-channel receiver, waterproof
1x spray paint can 100ml, aluminum silver, glossy. TS-17. Acrylic paint spray for plastic, wood, metal, glass and ceramic. This paint spray is very handy and, thanks to its content and size, is suitable for spraying models. As it is made from paint, its drying time is short. The can contains 100 ml. With 2-4 of these cans (depending on the opacity of the paint) a Tamiya truck cab can be painted. Tamiya paint sprays are not attacked by acrylic or enamel paints. After spraying the entire model surface with paint spray, details can be painted with acrylic or enamel paints. By combining three types of paint, colorful paints can be produced easily and reliably.Contents: 100 mlSignal word DangerHazard statements:H222 Extremely flammable aerosol.H229 Pressurized container: may burst if heated.H315 Causes skin irritation.H318 Causes serious eye damage.H335 May cause respiratory irritation.H336 May cause drowsiness or dizziness.EUH066 Repeated exposure may cause skin dryness or cracking.Safety statements:P102 Keep out of reach of childrenP210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211 Do not spray on an open flame or other ignition source.P251 Do not pierce or burn, even after use.P261 Avoid breathing gas/mist/vapours/spray.P271 Use only outdoors or in a well-ventilated area.P280 Wear protective gloves/protective clothing/eye protection/face protectionP302+P352 IF ON SKIN: Wash with plenty of water/acetone.P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.P310 Immediately call a POISON CENTER or doctor/physician.P332+P313 If skin irritation occurs: Get medical advice/attention.P362+P364 Take off contaminated clothing and wash before reuse.P405 Store locked up.P410+412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.Warning! Not suitable for children under 14 years.
6-chamber rear light unit (1 pair) without circuit board. Total width 38mm, 11mm high, 6mm deep. Width of the light unit 26,5mm. (500907038) The base body is chrome-plated on the inside. Matching lighting circuit boards in SMD technology can be found under item number 3233 (for 12V) or 3234 (for 7,2V). When using the lighting circuit boards (not included), the following lighting functions are possible: Tail light Brake light Reversing light Indicator/hazard warning light Fog tail light