Black Week 2024 is underway! Look forward to great offers!

Go to home page
€ 0,00 *

load securing

Filter
Metal hook about 9mm high 1 piece (5350 / 00)
Metal hook about 9mm high 1 piece (5350 / 00)
Metal hook about 9mm high 1 piece (5350 / 00).

Available immediately, delivery time: 1-4 days

Product number: 5158

€ 0,92 *
Turnbuckle M2 (aluminum), with opposite thread. Overall length
Turnbuckle M2 (aluminum), with opposite thread. Overall length
Turnbuckle M2 (aluminum), with opposing thread. Total length 19 - 30mm. (Center eye) 1 piece. Eyelet diameter: inside 1,7mm, outside 4mm. Base body diameter: 4mm.

Available immediately, delivery time: 1-4 days

Product number: 11850

€ 1,99 *
Turnbuckle M3 (aluminum), with opposite thread. Overall length
Turnbuckle M3 (aluminum), with opposite thread. Overall length
Turnbuckle M3 (aluminum), with opposing thread. Total length 45 - 74mm. (Center eye) 1 piece. Eyelet diameter: inside 1,7mm, outside 5mm. Base body diameter: 5,5mm.

Available immediately, delivery time: 1-4 days

Product number: 11851

€ 2,09 *
Lashing strap (textile) about 3mm wide 50cm long, orange, for
Lashing strap (textile) about 3mm wide 50cm long, orange, for
Lashing strap (textile) approx. 3mm wide, 50cm long, orange, ideal for securing cargo.

Available immediately, delivery time: 1-4 days

Product number: 4199

Content: 0.5 Running meter (s) (1,20 €* / 1 running meter)

€ 0,60 *
Spannschloss Messing, 2 piece, with right and left-hand thread
Spannschloss Messing, 2 piece, with right and left-hand thread
Brass turnbuckle, 2 pieces, with right-hand and left-hand thread. M3x24. Length 32-53mm. Diameter 4,0mm. Length of middle section 24mm with cross hole for toggle. Dimensions of the eyebolts:Outer diameter: 4,5mmInner hole: 2,9mmEyelet thickness: 2,8mmThread: M3 (1x left, 1x right)Middle section:Cross hole: 2mmShackles shown in the product photos are NOT included in the scope of delivery! This is only an example of use.

Available immediately, delivery time: 1-4 days

Product number: 7148

€ 5,64 *
Ratcheting buckle made of metal, etched approximately 16x5x4mm for
Ratcheting buckle made of metal, etched approximately 16x5x4mm for
Metal tension belt lock, etched approx. 16x5x4mm for scale 1:14,5 - 1:16 4 pieces KIT with 3x strap 50cm and 8 hooks. With assembly instructions. Belt tensioner. Kit for building 4 belt tensioners (without ratchet function). The pre-etched bending lines make assembly very easy. The parts of the belt tensioner can be soldered or glued with superglue. The parts can be easily separated from the etched frame with scissors or a carpet knife. This is quite easy due to the low material thickness of 0,2 mm. The ready-made belt tensioners significantly improve the prototypical lashing of cargo or building materials. Additional belt straps are available under the article numbers: 4199, 9145, 4200, 4201, 4202, 4203, 4204, 4205.

Available immediately, delivery time: 1-4 days

Product number: 3667

€ 8,50 *
Lashing strap (textile) about 3mm wide 50cm long, black, to
Lashing strap (textile) about 3mm wide 50cm long, black, to
Lashing strap (textile) about 3mm wide 50cm long, black, for fixing cargo goods suited.

Available immediately, delivery time: 1-4 days

Product number: 4204

Content: 0.5 Running meter (s) (1,20 €* / 1 running meter)

€ 0,60 *
1 pair D-rings with mounting material, brass investment casting
1 pair D-rings with mounting material, brass investment casting
1 pair of D-rings with fastening material, precision cast brass. 1-sided tab. Can be used as a lashing or towing eyelet. Brass, UNTREATED. Suitable for M1:16 - 1:14. Scope of delivery: 2x D-ring (made of precision cast brass), approx. 12x12mm. 2x fastening tab (made of precision cast brass), one-sided. Approx. 8x12mm. 4x hexagon screw VA M1,6x8mm (3531), 4x nut M1,6 (stainless steel) (2576) The hooks with the article numbers: 8179, 7239, 8282, 8398 fit this article.

Available immediately, delivery time: 1-4 days

Product number: 9175

€ 6,95 *
1x brass hook total length approx 14mm with eyelet (2mm
1x brass hook total length approx 14mm with eyelet (2mm

Available immediately, delivery time: 1-4 days

Product number: 8153

€ 3,80 *
Turnbuckle brass, 2 piece, with right and left thread
Turnbuckle brass, 2 piece, with right and left thread
Brass turnbuckle, 2 pieces, with right and left thread. M2x14. Length 22-32mm. Diameter 3,0mm. Length of middle section 14mm with cross hole for toggle. Image 2 shows an application example of a tension chain consisting of the following items:Chain item 3767Shackle item 7190Turnbuckle item 7145This combination is perfectly suitable for use in scales 1:16 - 1:13,5.Additional photos may already show the successor item. Dimensions of the eyebolts:Outer diameter: 3,5mmInner hole: 2mmEyelet thickness: 1,8mmThread: M2 (1x left, 1x right)Middle section:Length: 14mmCross hole: 1,6mm

No longer available

Product number: 7145

€ 4,50 *
Details
Shackle approx. 8,6x5,6mm, with threaded stud M1. Brass
Shackle approx. 8,6x5,6mm, with threaded stud M1. Brass
1 shackle approx. 8,6x5,6mm, with threaded bolt M1. Brass. 1 piece! Inner dimensions: 2,8x5mm. Thread: M1Shackle thickness: 1mm

Available immediately, delivery time: 1-4 days

Product number: 11269

€ 4,20 *
Turnbuckle M3 (aluminium) with opposite thread
Turnbuckle M3 (aluminium) with opposite thread
Turnbuckle M3 (aluminium) with counter-rotating thread. Total length 49 - 74mm. 1 piece. Eyelet diameter: inside 4,1mm, outside 9,4mm. SOLD OUT! This article is no longer available. Successor article (unfortunately not with identical technical data: Article 11851  

Available immediately, delivery time: 1-4 days

Product number: 5144

€ 1,90 *
Lashing strap (textile) about 6mm wide 50cm long, orange, for
Lashing strap (textile) about 6mm wide 50cm long, orange, for
Lashing strap (textile) approx. 6mm wide, 50cm long, orange, ideal for securing cargo.

Available immediately, delivery time: 1-4 days

Product number: 8411

Content: 0.5 Running meter (s) (1,20 €* / 1 running meter)

Ab € 0,60 *
Details
Turnbuckle M2 (MS), with opposing threads
Turnbuckle M2 (MS), with opposing threads
Turnbuckle M2 (MS), with opposing thread. Total length 39 - 56mm. 1 piece. Eyelet diameter: inside 4mm, outside 7,3mm. Made of brass, shiny nickel-plated. This article is available again. Successor article (unfortunately not with identical technical data:) Article 11850

Available immediately, delivery time: 1-4 days

Product number: 1866

€ 1,84 *
Lashing Set of 4 small double hooks, MS-precision casting, lashing strap
Lashing Set of 4 small double hooks, MS-precision casting, lashing strap
1 lashing set consisting of 4 small double hooks, MS precision casting, lashing strap and tension handles, approx. 6x9mm. Small design. The hooks can withstand moderate tensile forces. Suitable for Tamiya and Wedico scale. For the production of realistic lashings. Scope of delivery: 4x small double hooks approx. 7x6x4mm, sanded ready for use 2 meters of lashing strap, orange, approx. 3mm wide (item 9145) 2x tension handles approx. 9x6mm Hooks and tension handles are made of brass precision casting.

Available immediately, delivery time: 1-4 days

Product number: 9982

€ 9,95 *
1 brass hook total length approx. 16mm with eyelet (2,5mm
1 brass hook total length approx. 16mm with eyelet (2,5mm
1 brass hook, total length approx. 16mm with eyelet (2,5mm diameter), 1 piece. Made of metal (precision cast brass). BLACK. The hook is highly resilient.

Available immediately, delivery time: 1-4 days

Product number: 8179

€ 4,50 *
Turnbuckle brass, 2 piece, with right and left thread
Turnbuckle brass, 2 piece, with right and left thread
Turnbuckle brass, 2 piece, with right and left thread. M2x18. Length 26-40mm. Diameter 3,0mm. Length middle part 18mm m. Cross hole for toggle.

Available immediately, delivery time: 1-4 days

Product number: 7147

€ 4,93 *
1 D-ring with fixing material, brass fine-casting. 1-seiti
1 D-ring with fixing material, brass fine-casting. 1-seiti
1 D-ring with fastening material, precision cast brass. 1-sided tab. Can be used as a lashing or towing eyelet. Brass, BLACK. Ready to use. Suitable for Tamiya/Wedico size. Scope of delivery: 1x D-ring (made of precision cast brass), approx. 8x8mm. 1x fastening tab (made of precision cast brass), one-sided. Approx. 4,8x7mm. Blackened brass castings. 1x hexagon screw MS M1,4x8mm, 1x nut M1,4 (brass). The hooks with the article numbers 8154, 8179, 7239, 8282, 8398, 9345, 9346 fit this article. The D-ring with holder can bear loads according to their size. Ideal for use as a lashing point.

Available immediately, delivery time: 1-4 days

Product number: 11454

€ 4,99 *
Lashing Set of 4 big double hooks, MS-precision casting, lashing strap
Lashing Set of 4 big double hooks, MS-precision casting, lashing strap
1 lashing set consisting of 4 large double hooks, MS precision casting, lashing strap and tension handles, approx. 6x9mm. Small design. The hooks can withstand moderate tensile forces. Suitable for Tamiya and Wedico scale. For the production of realistic lashings. Scope of delivery: 4x large double hooks approx. 7x7x5mm, sanded ready for use 2 meters of lashing strap, orange, approx. 3mm wide (item 9145) 2x tension handles approx. 9x6mm Hooks and tension handles are made of brass precision casting.

Available immediately, delivery time: 1-4 days

Product number: 9983

€ 9,95 *
1x brass hook total length approx 16mm with eyelet (2,5mm
1x brass hook total length approx 16mm with eyelet (2,5mm

Available immediately, delivery time: 1-4 days

Product number: 8154

€ 4,25 *
1 shackle approx. 16x8mm, with threaded bolt with eye, galvanized
1 shackle approx. 16x8mm, with threaded bolt with eye, galvanized
1 shackle approx. 16x8mm, with threaded bolt with eye, galvanized. Load capacity approx. 50kg! Bolt diameter 3,9mm. External dimensions: 27x17mm.

Available immediately, delivery time: 1-4 days

Product number: 7175

€ 2,40 *
1 10 set of double hook, groß.Messing- precision casting, at
1 10 set of double hook, groß.Messing- precision casting, at
1 set of 10 double hooks, large. Brass precision casting, on a cast branch. Dimensions of each hook approx. 7x7x5mm. Large design. The hooks can withstand moderate tensile forces. Suitable for Tamiya and Wedico scale. To produce realistic lashing straps, we recommend using the lashing straps with the article numbers: 4199, 4200, 4201, 4202, 4203, 4204, 4205 in various colors. You can also find savings sets here with a price advantage consisting of a flat hook set and lashing straps! E.g. article 9530.

Available immediately, delivery time: 1-4 days

Product number: 9346

€ 7,60 *
1 brass investment cast hook. With stop eyelet. Total height
1 brass investment cast hook. With stop eyelet. Total height
1 brass precision cast hook. With stop eyelet. Total height 9,6mm. Width 6,7mm. Approx. 1,8mm thick. Eyelet inner diameter 1,0mm. Sprue still needs to be removed.

Available immediately, delivery time: 1-4 days

Product number: 8398

€ 4,40 *
Pulley, brass, 8mm diameter hole 2mm 5 pieces.
Pulley, brass, 8mm diameter hole 2mm 5 pieces.
Pulley, brass, 8mm diameter bore 2mm 5 piece.

Available immediately, delivery time: 1-4 days

Product number: 3775

€ 2,38 *
1 D-ring with fixing material, brass fine-casting. 1-seiti
1 D-ring with fixing material, brass fine-casting. 1-seiti
1 D-ring with fastening material, precision cast brass. 1-sided tab. Can be used as a lashing or towing eyelet. Brass, UNTREATED. On the cast branch. Suitable for the size Tamiya/Wedico. Scope of delivery: 1x D-ring (made of precision cast brass), approx. 8x8mm. 1x fastening tab (made of precision cast brass), one-sided. Approx. 4,8x7mm. 1x hexagon screw MS M1,4x8mm, 1x nut M1,4 (brass) The hooks with the article numbers 8154, 8179, 7239, 8282, 8398, 9345, 9346 fit this article.

Available immediately, delivery time: 1-4 days

Product number: 10689

€ 3,95 *
Turnbuckle M4 (aluminium) with opposite thread
Turnbuckle M4 (aluminium) with opposite thread
Turnbuckle M4 (aluminum) with counter-rotating thread. Total length 87 - 99mm. 1 piece. Eyelet diameter: inside approx. 6mm, outside approx. 12,5mm.

Available immediately, delivery time: 1-4 days

Product number: 5145

€ 1,55 *
Turnbuckle brass, 2 piece, with right and left thread
Turnbuckle brass, 2 piece, with right and left thread
Brass turnbuckle, 2 pieces, with right and left thread. M4x40. Length 52-82mm. Diameter 6,0mm. Length of middle section 40mm with cross hole for toggle. Additional photos may show a newer version. Dimensions of the eye bolts: Outer diameter: 5,5mm Inner hole: 4mm Eyelet thickness: 3,8mm Thread: M4 (1x left, 1x right) Middle section: Length: 40mm Cross hole: 4mm

No longer available

Product number: 7150

€ 5,40 *
Details
D-Rings (2 St.) with mounting hardware, brass investment casting
D-Rings (2 St.) with mounting hardware, brass investment casting
1 pair of D-rings with fastening material, precision cast brass. 1-sided tab. Can be used as a lashing or towing eyelet. Brass, BLACKED. Suitable for M1:16 - 1:14. Scope of delivery:2x D-ring (made of precision cast brass), approx. 12x12mm. Black.2x fastening tab (made of precision cast brass), one-sided. Approx. 8x12mm. Black.4x hexagon screw VA M1,6x8mm4x nut M1,6 (stainless steel)The hooks with the article numbers: 8154, 8179, 7239, 8282, 8398, 9345, 9346 fit this article.

Available immediately, delivery time: 1-4 days

Product number: 11475

€ 8,50 *
1 brass investment cast hook. With stop eyelet. Total height
1 brass investment cast hook. With stop eyelet. Total height
1 brass precision cast hook. With stop eyelet. Total height 7mm. Width 5mm. Approx. 1,5mm thick. Eyelet inner diameter 0,9mm. Sprue still needs to be sanded.

Available immediately, delivery time: 1-4 days

Product number: 8282

€ 4,00 *
Mini-shackle with screw, the casting branch. MS-precision casting, each 4
Mini-shackle with screw, the casting branch. MS-precision casting, each 4
Mini-shackle with screw, the casting branch. MS-precision casting, each 4 piece! about 4,5x7mm with screw and nut M1,4x6mm.

Available immediately, delivery time: 1-4 days

Product number: 5752

€ 7,95 *
Spannschloss Messing, 2 piece, with right and left-hand thread
Spannschloss Messing, 2 piece, with right and left-hand thread
Turnbuckle brass, 2 piece, with right and left thread. M1x8. Length 12-18mm. Diameter 1,8mm. Length middle part 8mm with transverse hole for toggle.

Available immediately, delivery time: 1-4 days

Product number: 7141

€ 5,00 *
Mini-shackle with screw, the casting branch. MS-precision casting, each 4
Mini-shackle with screw, the casting branch. MS-precision casting, each 4
Mini-shackle with screw, the casting branch. MS-precision casting, each 4 piece! about 3x5mm with screw and nut M1x4.

Available immediately, delivery time: 1-4 days

Product number: 5751

€ 10,89 *
1 10 set of double hook, klein.Messing- precision casting, at
1 10 set of double hook, klein.Messing- precision casting, at
1 set of 10 double hooks, small. Brass precision casting, on a cast branch. Dimensions of each hook approx. 7,5x6x4mm. Small design. The hooks can withstand moderate tensile forces. Suitable for Tamiya and Wedico scale. To produce realistic lashing straps, we recommend using the lashing straps with the article numbers: 4199, 4200, 4201, 4202, 4203, 4204, 4205 in various colors. You can also find savings sets here with a price advantage consisting of a flat hook set and lashing straps! E.g. article 9529.