Complete kit for CAT 345D hydraulic excavator with metal chains. Complete kit with all parts to build a fully functional model. The kit contains:Powder-coated chassis parts (black).Complete driver's cabin, black powder-coated.All parts for excavator arm and stick, bucket (CAT yellow coated). 3 Bühler electric motors (12V) with 137:1 gearbox for chain drive on both sides and rotation of the upper carriage.Solid base plate of the upper carriage, CAT yellow powder-coated.Upper carriage body (CAT yellow powder-coated).Body attachments, cabin interior fittings, windows, SMD LEDs, headlight lenses.Solid slewing ring with external gearing.Rotation drive of the upper carriage with 4-pin electrical feedthrough. Drive parts, sprockets, rollers, drive belts, chain tensioner (mechanical). Black metal 2-link chain links for the tracks. Battery (12V) NiMh 4500mAh, AMP connection. Charging cable. All hydraulic components such as: pump, tank, oil filter, 3 valves, 4 hydraulic cylinders (black powder-coated), piping (CAT yellow coated), hose material, nipples, hose connectors, hydraulic oil. Driver's cab interior. Chain regulator with engine sound module, central circuit board, loudspeaker. Headlights and cabin lights with bulbs, fan.Screws, nuts, small parts, colored decal sheet, ball bearings, bolts, accessories.Illustrated assembly instructions with wiring instructions and programming instructions.Registration card with serial number.Dimensions:Length: 810mm, with arm extended 1040mmWidth: 240mmHeight: 247mmDigging depth: 450mmReach from front edge of chain: 600mmLoading height to bottom edge of bucket: 500mmWeight: 13kgOnly the current version with revised chain drive is available for delivery: Chain wheel and motor shaft are designed to be form-fitting, the widths (contact surfaces) of drive belts (belt and pulley) have been widened by approx. 40%  

1 hydraulic control valve, 3-way, up to 10 bar. Dimensions (without connection nipple): 43x29,5x36mm. 0H503WE For extending the Wedico CAT excavator! This directional control valve enables proportional control of the hydraulic cylinders. The control valves are designed to accommodate a miniature servo. We recommend the servo with our article number 1708. This hydraulic extension is required, for example, to be able to operate a hydraulic quick-change system and a 2-shell grab or a swiveling bucket.

Hydraulic quick fit for Wedico CAT 345D hydraulic excavator. Fully built - ready for use. If completely painted / supplied powder-coated.

Electronic expansion module for Wedico CAT excavator 345D. For connection to the existing Wedico electronics of the excavator. Both the pump shutdown and the integrated sound module of the CAT excavator can be controlled by 3 additional functions. Due to the automatic zero point detection, setting on the remote control or teaching is not necessary.

Complete piping extension for Wedico excavator CAT345D. For laying the additional hydraulic functions on the arms. Note: To attach the pipe holder to the stick, the customer must drill holes in the existing arm and cut M2 threads! Scope of delivery: Pipe holder for main arm and stick Drilling template for mounting holes Pre-bent and coated brass pipes with M3 connection threads 4x quick couplings with shut-off valve 4x plugs for quick couplings 32x connection nipples M3 Small parts such as hoses, locking sleeves, screws, etc.

1:14 L945R crawler excavator kit made of aluminum with hydraulics. LESU / thicon-models. Precisely manufactured excavator kit made of aluminum with hydraulics. The new 45t class crawler excavator is made primarily of aluminum. The track drive is provided by two powerful brushless motors built directly into the hubs. The electrical connections of the motors are made via a mechanical rotary drive, allowing the uppercarriage to rotate continuously. The new high-performance hydraulic pump has a built-in pressure gauge for pressure monitoring. The hydraulic system even features an oil cooler with an active fan. The excavator comes standard with a 7-way hydraulic control block! The hydraulic cylinders are fitted with brass tubes. Required for operation: Hydraulic oil, remote control with at least 12 channels, 7,4V or 11,1V LiPo battery, charger. Scope of delivery: Excavator kit, unpainted, hydraulic system with brushless pump, oil cooler, 7-way control valve, motors, controller, servos, assembly instructions. Dimensions: Length: 382mm, Width: 268mm, Height: 228mm, Maximum length in transport position: 796mm, track width: 43mm, track length: 382mm, operating pressure approx. 20 bar, weight: 18,5kg. Optionally, we can also deliver the excavator powder-coated and fully assembled. Please do not hesitate to contact us.

Swiveling trench cleaning bucket for hydraulic excavator Wedico CAT 345D, with pull-off edge. Completely assembled, hosed and tested. This trench cleaning bucket is available as a useful extension for the CAT345D. It is delivered fully assembled, powder-coated, hosed and tested.Dimensions:Width: 225mmHeight: 110mm (total height, with mount)Swivel range: approx. +/- 50°Scope of delivery:Trench cleaning bucket, fully assembled, powder-coated, hosed and tested.2 quick-coupling plugsBucket mounting plate for quick-change system No longer available.

Sorting grab, completely assembled, powder-coated. Suitable for the Wedico CAT 345D hydraulic excavator. Sorting grab as a finished device. Completely assembled, powder-coated, hoses connected, tested. With large hydraulic rotary drive. The swivel cylinder has a maximum angle of rotation of 270°. Suspended on ball bearings. 2 hydraulic cylinders, each with a pressure of 14 kg, open and close the grab. The biting force is approx. 4,5 kg at 14 bar pressure. Scope of delivery: Sorting grab, as described above. Large hydraulic rotary drive. Shovel support plate, for quick-change system. 2 quick coupling plugs.

1:14 74t stainless steel crawler excavator kit with hydraulics, unpainted. thicon-models. Precisely manufactured metal excavator kit with hydraulics. The crawler excavator is made primarily of stainless steel. The track drive is provided by two powerful brushless motors built directly into the hubs. The electrical connections for the motors are made via a mechanical rotary drive, which allows the uppercarriage to rotate continuously. The new high-performance hydraulic pump has a built-in pressure gauge for pressure monitoring. The hydraulic system even features an oil cooler with an active fan. The excavator comes standard with a 6-way hydraulic control block! The hydraulic cylinders are equipped with brass tubes. Required for operation: Hydraulic oil, remote control with at least 12 channels, 11,1V LiPo battery, and charger. Scope of delivery: Excavator kit (unpainted), hydraulic system with pump, oil cooler, 6-way control valve, motors, controllers, servos, 77 pages of assembly instructions. Dimensions: Length: 952 mm, Width: 294 mm, Height: 272 mm, Max. Length from pivot point: 1050mm. Chain width: 55mm. Chain length: 418mm. Operating pressure: approx. 30 bar. Weight: approx. 27kg. Optionally, we can also deliver the excavator powder-coated and fully assembled. Please do not hesitate to contact us. Delivery is via freight forwarding or pickup in Widdern.

Assembly (service) of a CAT345D hydraulic excavator. Complete assembly of a CAT 345D excavator kit with all original parts and components.

1:14 short-tail excavator ET26L with adjustable boom and dozer blade thicon-models. 1:14 short-tail excavator ET26L with adjustable boom and dozer blade thicon-models. Compact short-tail excavator made of solid metal, unpainted, including hydraulics, adjustable boom and dozer blade.The kit is supplied with motors, hydraulic system with brushless pump and controller. The complete lighting including rotating beacon and GPS antenna is also included.Dimensions:Width: 234mmHeight: 304mmCrawler track: 328mmWeight: approx. 18kgDelivery:Kit unpaintedDrive with motor and controllerBrushless hydraulic pump with controllerControl valve with servosAttachmentsAssembly instructions in German/English.Required for operation:Hydraulic oil7,4V batteryRemote control with at least 16 channels