1x Servo Futaba P-S3107 nano. 11mm servo 9,5gr., 12Ncm, 0,09sec/45°, 21,8 x 11,0 x 19,8 mm. Incl. mounting material and various control horns/disks. This servo is the standard servo for all Leimbach hydraulic valves.Included are rubber grommets, a total of 3 control horns/disks and mounting material.Analog micro servo with plastic gearLow-wear potentiometerRobust plastic housingHigh resolutionHigh return accuracyDescriptionInexpensive and fast 11mm servo for small model aircraft such as indoor, park and slow flyers, as well as HLGs. Ideal where the smallest dimensions are important. The scope of delivery includes a 20 mm servo disc and cross, as well as fastening material.Technical dataSetting speed 60°: 0,12 s (4,8 V)Setting torque: 1,2 kgcm (4,8 V)Operating voltage: 4,8 VControl frequency: 50 - 70 HzWeight: 9 gDimensions: 22,1 x 10,9 x 20,1 mm

1 trough kit for skip loader. 9381. Punched and milled aluminum parts for building 1 skip loader. All screws and small parts included. With illustrated assembly instructions. Instructions are available for downloading for this article. Downloading is free! (except for your online costs).Dimensions of the trough:Height: 83mmLength: 216mmWidth: 109mm (top), 87mm at the bottomThis skip loader fits the skip loader bodies items 7196 and 8796.

1 side box with hinged lid (ALU) for roll-off and demountable trailers 195x45x45mm (outside). Pre-bent and screwed aluminum box with hinges and small parts. (9371). The side box is suitable for holding the battery pack and other components and is very easily accessible thanks to the wide, hinged side panel. The side flap is reliably kept closed by 2 mini magnets. Delivered pre-assembled with all necessary small parts and detailed assembly instructions. Suitable for the roll-off trailers 7879 and 7880.

Decals, self-adhesive film "Absetzer1" matching scale 1: 16 to 1: 14,5. High-quality self-adhesive film with a protective layer, splashproof. Also available in other standards!

Fender set for roll-off/demountable trailers, aluminum. Fender set made of aluminum (4 pieces) with complete fastening material. (9377). Retrofit kit aluminum fender with fastening material. Delivered as a set (4 pieces) with all necessary small parts. Suitable for the roll-off trailers 7879 and 7880, as well as the demountable trailers 10387 and 10392, as well as corresponding self-built ones. For trailers that are or were delivered from 2020 onwards, the corresponding holes for fastening are already there. To retrofit older trailers, you have to drill the corresponding holes yourself; a 1:1 paper drilling template is included with each set.

1x skip loader kit, suitable for Tamiya vehicles. 10-14 bar pressure. 7,2V. Allows skip loaders to be set down and tipped without any manual intervention. (09380T). With this kit you can build a vehicle with very high play value. Complete kit made of aluminum including hydraulic pump, cylinders, valves. The locking between tipping and setting down is controlled by a servo. Two hydraulic cylinders lift the skip.The vehicle chassis/driver's cab is NOT included in the scope of delivery! This kit enables the following functions:Setting down the skip and picking it up again on the groundTipping the skipThe kit is designed for a 2-axle chassis. A free frame length of 250mm must be available behind the driver's cab. The chassis is not included in the kit.The kit contains:All required aluminum parts (unpainted)Hydraulic pump with tank and motor 7,2VHydraulic filter2 hydraulic lifting cylinders2 hydraulic boom cylinders2 hydraulic cylinders (for the support)Hydraulic oil (250ml)Control valve (3-way), hydraulic accessories (hose, small parts)Hydraulic connectors and locking sleevesLED tail lights 7,2VSmall partsVery comprehensive, illustrated assembly instructionsNot included: trough, servos, RC components.3 servos S3107 (item 1708) are also required.

1x skip loader kit, suitable for Wedico vehicles. 10-14 bar pressure. 12V. Enables the setting down and tipping of skip loaders without any manual intervention. (09380). With this kit you can build a vehicle with very high play value. Complete kit made of aluminum including hydraulic pump, cylinders, valves. The locking between tipping and setting down is controlled by a servo. Two hydraulic cylinders lift the skip.The vehicle chassis/driver's cab is NOT included in the scope of delivery! This kit enables the following functions:- Setting down the skip and picking it up again on the ground- Tipping the skipThe kit is designed for a 2-axle chassis. A free frame length of 250mm must be available behind the driver's cab. The chassis is not included in the kit.The kit contains:- All necessary aluminum parts (unpainted)- Hydraulic pump- 2 hydraulic lifting cylinders- 2 hydraulic boom cylinders- 2 hydraulic cylinders (support)- Control valves, hydraulic accessories (hose, oil, small parts)- LED taillights 12V- Small parts- Very comprehensive, illustrated assembly instructionsNot included: trough, servos, RC components.

Tipper trailer kit, Tamiya scale. Suitable for all tipper bodies. With parking brake that is operated by a servo. (9382T) To increase the play value, LEIMBACh is now offering a trailer for tipper bodies to match our tipper / WELAKI, so that several bodies can be transported.The tipper trailer is based on our existing trailer for roll-off containers.This trailer is also available in two widths, suitable for WEDICO or TAMIYA vehicles.In addition, the height of the roll-off trailer can be adjusted to the vehicle during assembly.Just like the roll-off trailer, the trailer for tipper bodies also has a parking brake that is operated by a servo. The servo is not included in the scope of delivery.If the brake is applied, the supply voltage of the trailer can be switched off. The parking brake remains applied. This is particularly interesting if the trailer is parked for a longer period of time. As an accessory, a "battery box" can be attached to the side, just like with our roll-off trailer. The power supply and the necessary electronics can be housed in the "battery box". Accessories: - Battery box: Article 8019 - Rear light: Article 3104 - Servo S 3107: Article 1708

Demountable trailer kit, Wedico scale. Suitable for all demountable troughs. With parking brake that is operated by a servo. (9382) To increase the play value, LEIMBACH is now offering a trailer for demountable troughs to match our demountable tipper / WELAKI, so that several troughs can be transported.The demountable trailer is based on our existing trailer for roll-off containers.This trailer is also available in two widths, suitable for WEDICO or TAMIYA vehicles.In addition, the height of the roll-off trailer can be adjusted to the vehicle during assembly.Just like the roll-off trailer, the trailer for demountable troughs also has a parking brake that is operated by a servo. The servo is not included in the scope of delivery.If the brake is applied, the supply voltage of the trailer can be switched off. The parking brake remains applied. This is particularly interesting if the trailer is parked for a longer period of time. As an accessory, a "battery box" can be attached to the side, just like with our roll-off trailer. The power supply and the necessary electronics can be housed in the "battery box". Accessories: - Battery box: Article 8019 - Rear light: Article 3103 - Servo S 3107: Article 1708