Buy RC Forklift Linde H40D, Robbe 3349, and parts and accessories

1 aluminum swing axle f. Robbe trucks. Comprising 1

Guide. This axle, milled from solid aluminum, prevents the truck from ever getting knock-knees again, even when in constant operation or standing for long periods of time. The original parts of the kit are used as additional parts to complete the axle. Finally available again!

Available immediately, delivery time: 1-4 days

Product number: 7183

€ 67,00 *

Subscriptions

1 pair of long forks, aluminum, black anodized. For robbe-Stapl

1 pair of long forks, aluminum, black anodized. Fits the robbe forklift H50. 8x54x131mm. Available from stock!

No longer available

Product number: 7103

€ 27,50 *

Subscriptions

Details

1x Foliensatz for trucks H50 (formerly robbe)

1x foil set for the H50 forklift truck (formerly from robbe). 3 precisely fitting foil parts in anthracite-grey. 2 logos of the manufacturer (white). The foil parts are cut from high-quality labelling foil, weeded and covered with transfer foil. Instructions are included.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9722

€ 16,99 *

Subscriptions

1x forklift Linde H40D - road ready. Carson, M = 1: 14

1x Linde H40D forklift truck - ready to drive. Carson, M=1:14 lifts loads of up to 200g. L:310mm W:100mm H:210mm. Red. Complete with 6-channel remote control. 1x LINDE H40D forklift truck, fully functional RC model that can lift loads of up to 200g. Console transmitter with 6 functions.Functions:SteeringDriving forwards/backwardsTilt the boomFork up and downLight functionSound functionDriver figure and a pallet with load are included.Scope of delivery: Ready-to-drive forklift truck 6-channel 2,4GHz remote control system with carrying strap Driver figure, pallet with load 9 mignon batteries (AA): 4x for transmitter, 5x for forklift.

Available immediately, delivery time: 1-4 days

Product number: 9306

€ 189,50 * € 210,00 * (9.76% saved)

Subscriptions

Fork adjustment electrical, 1 piece. Complete mounting kit

The original forks are used; these are not included in the scope of delivery. The fork carrier (aluminum, milled) is replaced with the original carrier (made of plastic). Partial dismantling of the fork boom is necessary for this. An electronic switch (e.g. item 3569) or a speed controller (e.g. item 3020) is required to control the adjustment motor.

No longer available

Product number: 5712

€ 128,90 *

Subscriptions

Details

1x transport hooks from MS / aluminum, matching the original forks

1x transport hooks from MS / aluminum to match the original forks of Robbe-stacker to 127 mm Lastarmlänge, in 4 positions lockable (extendable). Unpainted.

End of life - article no longer available!

Product number: 4600

€ 29,00 *

Subscriptions

Details

1 1 chain / 8Zoll 38 members. Length mm 120 8.3 from spare parts

1 chain 1/8 inch 38 links. Length 120 mm spare part 8.3 from robbe forklift. Total width 3,7 mm. Length of a single link 1/8" or 3,175 mm. Item is sold out!

No longer available

Product number: 7599

€ 20,00 *

Subscriptions

Details

Hydraulic oil 250ml HLP22. High quality hydraulic oil for

Hydraulic oil 250ml HLP22. High quality hydraulic oil for models with hydraulic systems. Suitable for the 11710 hydraulic forklift.

Available immediately, delivery time: 1-4 days

Product number: 11725

€ 11,95 *

Subscriptions

1 guard, unpainted, brass. Suitable for

1 protective grille, unpainted, brass. Suitable for the fork adjustment or fork side shift. Grille height approx. 50mm. The grille is simply placed on the fork plate. Weight approx. 30g. Total width approx. 111mm. Height of the protective grille bars approx. 45mm. A matt black version is also available - please enquire if required.

No longer available

Product number: 7655

€ 26,00 *

Subscriptions

Details

Linde H40D forklift truck - ready to drive. Carson, M = 1:14 lifts

Forklift Linde H40D - ready to drive. Carson, M=1:14 lifts loads of up to 200g. L:310mm W:100mm H:210mm. Orange Complete with 6-channel remote control. 1x forklift LINDE H40D, fully functional RC model that can lift loads of up to 200g. Desk transmitter with 6 functions.Functions:SteeringDriving forwards/backwardsTilt the boomFork up and downLight functionSound functionDriver figure and a pallet with load are included.Scope of delivery: Ready-to-drive forklift 6-channel 2,4GHz remote control system with carrying strap Driver figure, pallet with load 9 mignon batteries (AA): 4x for transmitter, 5x for forklift.

No longer available

Product number: 11747

€ 179,00 * € 210,00 * (14.76% saved)

Subscriptions

Details

Driving battery for hydraulic forklifts. 7,4V 3,5Ah LiIon with

Drive battery for hydraulic forklifts. 7,4V 3,5Ah LiIon with T-plug and protective electronics. The new LiIon battery is extremely small, light and still offers maximum performance with up to 3500mAh! And all this without having to use a special charger. This battery has built-in protective electronics that protect the battery and your model. When charging the battery, the internal electronics automatically balance the cell voltage. This means you do not need a separate balancer when charging. To charge, simply use a LiPo program and deactivate the balancer. In the model, the battery switches off automatically when the voltage is too low and thus protects itself from damage caused by deep discharge. Also suitable for construction machinery. Please pay attention to the current load on hydraulic systems! Ideal for our forklift no.: 11710. Technical data: 6A continuous discharge, 10A short-term, connection cable: T-plug 95mm long. Dimensions: 65x36x20mm Weight: 100g

Ready to ship in 5 days, delivery time 1-4 days

Product number: 11728

€ 74,70 * € 74,95 * (0.33% saved)

Subscriptions

Fork shoes (1 pair), made of ABS, suitable for the

Fork shoes (1 pair), made of ABS, suitable for the original forks of the robbe forklift, approx. 110 mm total length, 10 mm wide. NEW version! Milled from ABS. **Sold out!

End of life - article no longer available!

Product number: 9531

€ 19,00 *

Subscriptions

1 load hook, Brass, matching the original forks

1 load hook, brass, suitable for the original forks of the robbe forklift. Mounted with 2 fork tines. With very finely detailed brass hook. With clamping screw for locking. Unpainted. Center distance of the fork pockets: 40mm. Inside dimensions of the fork pockets 10x4mm.

No longer available

Product number: 8300

€ 16,99 *

Subscriptions

Details

Forklift Linde H40D red, hydraulic, metal kit

Linde H40D forklift truck, red, hydraulic. Metal kit with hydraulics, light and sound. Scale 1:14. Red powder-coated body parts. Version 2. Compact metal forklift truck with hydraulic mast, light and sound module! The forklift truck is powder-coated red as standard and licensed by LINDE! Each model receives a certificate with a serial number. The entire model is made of metal and manufactured with extreme precision. The mast is tilted and extended using a hydraulic system. Driving is done electrically via a built-in differential in the front of the vehicle. Steering is done via a mini servo in the rear. All shafts and wheels are of course ball-bearing mounted.The hydraulic system is set to approx. 10 bar, which is sufficient for a lifting force of approx. 1000g.Scope of delivery:Forklift kit, Linde red, powder-coatedDrive with motor and controllerSteering servoBrushless hydraulic pump with controllerDual control valve with servosAttachmentsLighting systemSound module46-page assembly instructionsAdditionally required for operation:Hydraulic oil, item 117257,4V battery (2s), item 11728Remote control with at least 7 channelsDimensions:Length: 325mmWidth: 108mmHeight: 201mmMax. fork height: 220mmMax. mast height: 306mmWheelbase: 145mmTilt angle: +10°/-6,5°Steering radius left: 301mm, steering radius right: 247mmWeight: approx. 2650g

Ready to ship in 5 days, delivery time 1-4 days

Product number: 11710

€ 1.549,00 * € 1.599,00 * (3.13% saved)

Subscriptions

1 load hook, Brass, matching the original forks

1 load hook, Brass, matching the original forks of robbe stacker recording with 1 forks. With finely detailed brass hooks. With clamping screw for locking. Unpainted internal dimension of the fork pocket 10x4mm

Available immediately, delivery time: 1-4 days

Product number: 8301

€ 10,25 *

Subscriptions

Carpet mandrel (1 piece) brass, matching the

Carpet mandrel (1 piece) brass, suitable for the original forks of the robbe forklift, approx. 100 mm mandrel length, 5 mm diameter, inner dimensions of the shoes 10x3,7 mm. Simply pushed over the existing forks and fixed with a screw. Approx. 45 g. Center distance of the fork shoes approx. 40 mm. Enables the inclusion of rolls with a maximum diameter of 50 mm. Delivered unpainted and disassembled (3 parts). The mandrel can be picked up and put down remotely. Increases the play value for every forklift.

Available immediately, delivery time: 1-4 days

Product number: 4231

€ 27,00 *

Subscriptions

Fork shoes (1 pair), brass, suitable for the

Fork shoes (1 pair) brass to match the original forks of Robbe-stacker about 110 mm total length, 10 mm wide. New version!

No longer available

Product number: 4090

€ 22,50 *

Subscriptions

Details

1x forklift Linde H40D - road ready. Carson, M = 1: 14

1x forklift Linde H40D - ready to drive. Carson, M=1:14 lifts loads of up to 200g. L:310mm W:100mm H:210mm. THW version, blue. Complete with 6-channel remote control. 1x forklift LINDE H40D-THW, fully functional RC model that can lift loads of up to 200g. Desk transmitter with 6 functions.Functions:SteeringDriving forwards/backwardsTilt the boomFork up and downLight functionSound functionDriver figure and a pallet with load are included.Scope of delivery:Forklift ready to drive6-channel 2,4GHz remote control system with carrying strapDriver figure, pallet with load13 mignon batteries (AA)

Available immediately, delivery time: 1-4 days

Product number: 9305

€ 179,50 * € 220,00 * (18.41% saved)

Subscriptions

1 filing for carpet thorn brass. The tray is on

1 filing for carpet thorn brass. The tray is screwed to the floor and takes the carpet Dorn (Article 4231) on. The filing allows the safe pick and place the carpet mandrel.

No longer available

Product number: 4605

€ 6,25 *

Subscriptions

Details

1x fork pockets for forklift forks for order picking

1x fork pockets for forklift forks for picking or Rungenwagen. Brass. Adapted to receive the pivot pin or a fixed-screwing.

No longer available

Product number: 5127

€ 5,55 *

Subscriptions

Details

1 spinner, electric forklift (zBrobbe)

1x rotating device, electric, for robbe forklifts Complete attachment kit for rotating the fork plates on robbe forklifts or self-built forklifts. Aluminum. Complete with motor. The original forks are used, these are not included in the scope of delivery. The fork carrier (aluminum, milled) is replaced with the original carrier (made of plastic). Partial disassembly of the fork boom is necessary for this. An electronic switch (e.g. item 3569) or a speed controller (e.g. item 3020) is required to control the rotating motor. We recommend using the speed controller 3020 (THOR4)! Technical data: Base plate 110x40mm 360° rotatable (endless) Drive via miniature gear motor and brass bevel gears Base plate, motor carrier and support arms are CNC-milled The forks shown are NOT included in the scope of delivery!

End of life - article no longer available!

Product number: 9710

€ 124,90 *

Subscriptions

Details

Forklift Linde H40D - ready to drive. Carson, M=1:14 Yellow

1x forklift Linde H40D - ready to drive. Carson, M=1:14 lifts loads of up to 200g. L:310mm W:100mm H:210mm. YELLOW. Complete with 6-channel remote control 1x forklift LINDE H40D - yellow, fully functional RC model that can lift loads of up to 200g. Desk transmitter with 6 functions.Functions:SteeringDriving forwards/backwardsTilt the boomFork up and downLight functionSound functionDriver figure and a pallet with load are included.Scope of delivery:Forklift ready to drive6-channel 2,4GHz remote control system with carrying strapDriver figure, pallet with load13 mignon batteries (AA)

Available immediately, delivery time: 1-4 days

Product number: 12715

€ 179,50 * € 220,00 * (18.41% saved)

Subscriptions

Forklift Linde H50 kit robbe 3349, M = 1: 16 max

Forklift Linde H50 kit robbe 3349, M=1:16 max. lifting height 200mm L:285mm W:115mm H:170/270mm. Now with rear swing axle. NO LONGER AVAILABLE! NO LONGER AVAILABLE! Article only as a source of information in the shop! A model with high play value that is a lot of fun to play with! Contents of the kit: Colored body parts (half shells). Ball-bearing, driven front axle with differential. Drive motor with gearbox. Oscillating rear axle. Rims and tires, rim caps. All parts for the tiltable, fully functional lifting mast. Lifting motor with gearbox parts. Lifting cylinder (threaded spindles) for lifting mast. Fork carrier and forks. Cab frame, steering column, steering wheel. Holder for steering servo and tilt servo (tilting mast). Reversing switch for lifting motor. Electric main switch. Counterweight, protective roof. Driver's seat with console, hood, stick dummies. Rear part, rear grille, exhaust, antenna tube. Extensive illustrated assembly instructions, decal sheet. The video also shows accessories that are not part of the kit! For this model you will find extensive accessories that increase the play value of this forklift even more! We recommend the following for the driving model: 1x Servo S3115 Micro (item 7594) for the mast tilt function1x Servo S3003 (item 3989) for the steering function1x Controller THOR15HC (item 3019) for the drive motor1x Controller THOR4 (item 3020) for the lifting motor1x Drive battery (item 5561) 6V/2000mAh

End of life - article no longer available!

Product number: 3178

€ 419,00 *

Subscriptions

Details