Black Week 2024 is underway! Look forward to great offers!

Go to home page
€ 0,00 *
Filter
Storage box Sandmaster Tamiya
Storage box Sandmaster Tamiya
1x storage box Sandmaster Tamiya plastic storage box kit with lid for side mounting on the main frame. Unpainted, suitable for Tamiya scale. Internal dimensions: 135x55x40mm External dimensions: Total length (overall): 187mm Total depth: 61,5mm Height: 48mm

Available immediately, delivery time: 1-4 days

Product number: 9874

€ 29,49 *
Complete kit Sandmaster SAND370 for 3-axle chassis
Complete kit Sandmaster SAND370 for 3-axle chassis
1 complete Sandmaster SAND370 kit. Suitable for Tamiya scale. For 3-axle Scania and MAN (without spoiler). Bolted round trough made of aluminumTamiya scalesuitable for 3-axle Scania or MAN (without spoiler)external tailgateautomatic flap lockingtilting bearing, dump protection, dummy cylindermechanical tilt spindle drive7,2V motor RB35Power120 with limit switchesemergency release, underrun protectionholder for servo front mountingkit, unpainted, partially pre-assembledkit contains all Sandmaster370 parts plus cardan shaftdimensions approx. 440x185mm, trough height 95mmframe width 62mm, loading height on frame 205mmweight approx. 1100g, tipping angle approx. 50°Instructions are available for downloading this article. Downloading is free! (except your online costs).

Available immediately, delivery time: 1-4 days

Product number: 7640

€ 668,99 *
1 Kippspindelantrieb SPIN370-TAM. Matching
1 Kippspindelantrieb SPIN370-TAM. Matching
1 tilt spindle drive SPIN370-TAM. Suitable for Tamiya scale. For 3-axle chassis. Assembly pre-assembled and wired. Dimensions approx. 62x400mm. -Aluminum parts, screwed-Trapezoid spindle, rear mount with ball bearings-7,2V motor with gearbox-with subframe suitable for HAR370-TAM-suitable speed controllers (NOT included) Articles 5163, 6866, 3019

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9075

€ 264,99 *
Complete kit Sandmaster SAND430 for 4-achser chassis
Complete kit Sandmaster SAND430 for 4-achser chassis
1 complete Sandmaster SAND430 kit. Matching the Tamiya scale. For 4-axle conversions such as Scania, MAN, Volvo or Mercedes (each WITHOUT spoiler!). Bolted round trough made of aluminumTamiya scalesuitable for 4-axle conversions such as Scania, MAN, Volvo or Mercedes (each WITHOUT spoiler!)external tailgateautomatic flap lockingtilting bearing, dump protection, dummy cylindermechanical tilt spindle drive7,2V motor RB35Power120 with limit switchesemergency release, underrun protectionholder for servo front mountingkit, unpainted, partially pre-assembledkit contains all Sandmaster430 parts without cardan shaftdimensions approx. 500x185mm, trough height 95mmframe width 62mm, loading height on frame 205mmweight approx. 1200g, tipping angle approx. 50°Instructions are available for download for this article. Downloading is free! (except for your online costs).

Available immediately, delivery time: 1-4 days

Product number: 8323

€ 699,99 *
Frame end crosshead for Sandmaster 370 / 430 for traction mouth 7876
Frame end crosshead for Sandmaster 370 / 430 for traction mouth 7876
Frame end cross member (aluminum) for Sandmaster 370/430. With suitable holes for using the Carson tow bar (7876) - not included. Width: 60mmHeight: 38mmDepth: 14mmCentral hole for tow bar: 12mm4 holes 1,6mm: spacing 18x8mm

Available immediately, delivery time: 1-4 days

Product number: 11303

€ 13,49 *
%
FineLine flatbed body for Volvo FH16 615mm frames
FineLine flatbed body for Volvo FH16 615mm frames
FineLine flatbed structure for Tamiya Volvo FH16 with 615mm frame length. Structure made of polystyrene. Incl. diffusers in LED look and wood inlays. The item is delivered unpainted as a kit. In the photos it is shown assembled and painted with additional accessories for an additional charge. The FH16 driver's cab including chassis is also not included!

Ready to ship in 5 days, delivery time 1-4 days

Product number: 12807

€ 164,90 * € 169,00 * (2.43% saved)
Propshaft KDW150 for Sandmaster
Propshaft KDW150 for Sandmaster
1x propshaft KDW150 for Sandmaster Fits Sandmaster of Servonaut Total length about everything 150mm

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9873

€ 25,10 *
Round trough SandMaster MUL370 1:14
Round trough SandMaster MUL370 1:14
1x round trough SandMaster MUL370 1:14. Bolted round trough made of aluminum. External tailgate, automatic tailgate locking. Unpainted. Cylinder dummy & tilt bearing. 440x185x95mm

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9878

€ 293,99 *
%
Crane construction, US-style, red, for driving Gest ell 736. (276)
Crane construction, US-style, red, for driving Gest ell 736. (276)
Crane body, US style, red, for chassis 736. (276). Dimensions: Overall length: 355mm Overall width: 173mm Height: 185mm Lifting arm length: 225 - 365mm Weight: 1,0kg

Ready to ship in 5 days, delivery time 1-4 days

Product number: 4672

€ 495,00 * € 595,00 * (16.81% saved)
Main frame Sandmaster HAR370 1: 14
Main frame Sandmaster HAR370 1: 14
1x main frame Sandmaster HAR370 1: 14 Replaces the Tamiya original frame. Holder for Servo front mounting. Rear protective devices. Aluminum. Unpainted. Size: 547 63 x x 21mm

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9875

€ 112,29 *
Main frame Sandmaster HAR430 1: 14
Main frame Sandmaster HAR430 1: 14
1x main frame Sandmaster HAR430 1: 14 Replaces the Tamiya original frame. Holder for Servo front mounting. Rear protective devices. Aluminum. Unpainted. Size: 607 63 x x 21mm

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9876

€ 127,29 *
Rundmulde Sandmaster MUL430 1: 14.
Rundmulde Sandmaster MUL430 1: 14.
1x round trough SandMaster MUL430 1:14. Bolted round trough made of aluminum. External tailgate, automatic tailgate locking. Unpainted. Cylinder dummy & tilt bearing. 500x185x95mm

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9879

€ 310,00 *
Kippspindelantrieb SPIN320 1: 16
Kippspindelantrieb SPIN320 1: 16
1x Kippspindelantrieb SPIN320 1: 16 trapezoidal spindle, rear receptacle with ball bearings. 12V motor with gear. Aluminum. Unpainted. Pre-assembled. 60 x 350mm

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9880

€ 254,99 *
1x parts set for tail lift. Suitable for Tamiya. All on
1x parts set for tail lift. Suitable for Tamiya. All on
1x parts set for tail lift. Suitable for Tamiya. All individual parts are made of brass, nickel silver or steel. The many true-to-scale details characterize our scale metal model of an original hydraulically operated tail lift. The multi-part handlebars, curved holders and fine details such as the etched steps make this model of a tail lift unique. -The distance between the two attachment supports is specially tailored to the Tamiya frame dimensions. The existing long and round holes in the attachment supports enable easy connection and adjustment to the loading area of ​​your model. Your platform (loading floor) can be attached either via the holes in the platform support or by gluing. -The cylinder dummies are movable and allow the tail lift to be lowered accordingly. Since all the movement options are available as in the original, the tail lift could also be made movable. -To secure the side wall to the model when it is closed, we recommend using small neodymium magnets, which are installed in a concealed manner in the loading floor and on the truck side (not included in delivery). -The parts kit contains all parts ready for construction, including screws and nuts. The parts should be thoroughly cleaned and then painted before assembly.

No longer available

Product number: 10093

€ 89,50 *
Details
Complete kit Sandmaster SAND370ARO for Tamiya MB Arocs
Complete kit Sandmaster SAND370ARO for Tamiya MB Arocs
Complete kit Sandmaster SAND370ARO Matching the Tamiya scale. For 3-axle Mercedes-Benz Arocs from Tamiya. Complete kit SandMaster SAND370-Arocs 1:14 bolted round trough made of aluminum Tamiya - scale suitable for 3-axle Arocs external tailgate automatic flap lock tilting bearing, dump protection, dummy cylinder mechanical tilt spindle drive 7,2V motor with limit switches emergency release, underrun protection holder for servo front mounting kit, unpainted, partially pre-assembled kit contains all SandMaster 370 parts plus cardan shaft dimensions approx. 500 x 185mm, trough height 95mm frame width 62mm, loading height on frame 205mm tilt angle approx. 50 degrees weight approx. 1200g

Ready to ship in 5 days, delivery time 1-4 days

Product number: 10702

€ 690,00 *
Complete kit Sandmaster SAND320 for 3-achser chassis
Complete kit Sandmaster SAND320 for 3-achser chassis
1 complete Sandmaster SAND320 kit. Suitable for Wedico scale. For 3-axle vehicles (without spoiler). Bolted round trough made of aluminumWedico scalesuitable for 3-axle chassis (without spoiler)external tailgateautomatic flap lockingtilting bearing, dump protection, dummy cylindermechanical tilt spindle drive12V motor RB35 with limit switchesemergency release, underrun protectionholder for servo front mountingkit, unpainted, partially pre-assembledkit contains all Sandmaster320 parts plus cardan shaftdimensions approx. 440x175mm, trough height 95mmframe width 60mm, loading height on frame 175mmfor main frame length of 480mmweight approx. 1000gr., tipping angle approx. 50°Instructions are available for downloading this article. Downloading is free! (except your online costs).

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9098

€ 529,49 *
Complete kit Sandmaster SAND370 for 4-achser chassis
Complete kit Sandmaster SAND370 for 4-achser chassis
1 complete Sandmaster SAND370 kit. Suitable for Wedico scale. For 4-axle vehicles (without spoiler). Bolted round trough made of aluminumWedico scalesuitable for 4-axle chassis (without spoiler)external tailgateautomatic flap lockingtilting bearing, dump protection, dummy cylindermechanical tilt spindle drive12V motor RB35 with limit switchesemergency release, underrun protectionholder for servo front mountingkit, unpainted, partially pre-assembledkit contains all Sandmaster370 parts plus cardan shaftdimensions approx. 490x175mm, trough height 95mmframe width 60mm, loading height on frame 175mmfor main frame length of 530mmweight approx. 1100gr., tipping angle approx. 50°Instructions are available for downloading this article. Downloading is free! (except your online costs).

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9097

€ 555,99 *
Kippspindelantrieb SPIN430 1: 14
Kippspindelantrieb SPIN430 1: 14
1x Kippspindelantrieb SPIN430 1: 14 trapezoidal spindle, rear receptacle with ball bearings. 7,2V motor with gear. Fittingly subframe HAR430. Aluminum. Unpainted. Pre-assembled. 62 x 460mm

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9877

€ 273,00 *
Rundmulde Sandmaster MUL370 1: 16.
Rundmulde Sandmaster MUL370 1: 16.
1x round trough SandMaster MUL370 1:16. Bolted round trough made of aluminum. External tailgate, automatic tailgate locking. Unpainted. Cylinder dummy & tipping bearing. 440x175x95mm For 4-axle tipper. Attention only for raised chassis! Raising kit required! e.g. article 8287

Available immediately, delivery time: 1-4 days

Product number: 9883

€ 293,99 *
Dump body painted, red, for Peterbilt without sleeper
Dump body painted, red, for Peterbilt without sleeper
Trough body painted red for Peterbilt without sleeper and Scania CR19. With low trough front wall. (2111). Technical data: Length (on the ground) 400mm Width 170mm Max. height 98mm Kit contains: - Completely finished bevelled and drilled trough body, powder-coated side reinforcement frame, powder-coated tailgate and reinforcement frame for tailgate, powder-coated tailgate bearing, powder-coated bevelled front end plate, powder-coated trough support for frame, small plastic parts, screws, nuts - Illustrated assembly instructions Item 7683 is suitable as a hydraulic tipping drive.

No longer available

Product number: 4911

€ 273,60 *
Details
Tipper body painted, white, for DAF XF 105 SC, Scania
Tipper body painted, white, for DAF XF 105 SC, Scania
Trough body painted white for DAF XF 105 SC, Scania Highline, MAN TGX XLX, Actros. Kit 2115. With high trough front wall. Technical data: Length (on the ground) 400mm Width 170mm Max. height 126mm Kit contains: - Completely finished bevelled and drilled trough body, powder-coated side reinforcement frame, powder-coated tailgate and reinforcement frame for tailgate, powder-coated tailgate bearing, powder-coated bevelled front end plate, powder-coated trough support for frame, small plastic parts, screws, nuts - Illustrated assembly instructions Item 7683 is suitable as a hydraulic tilting drive.

No longer available

Product number: 4913

€ 282,60 *
Details
%
Tipper body painted, silver, for DAF XF105 SC
Tipper body painted, silver, for DAF XF105 SC
Trough body painted, silver, for DAF XF105 SC, Scania Highline, MAN TGX XLX, Actros. Kit 2117. With high trough front wall. Technical data: Length (on the ground) 400mm Width 170mm Max. height 126mm Kit contains: - Completely finished bevelled and drilled trough body, powder-coated side reinforcement frame, powder-coated tailgate and reinforcement frame for tailgate, powder-coated tailgate bearing, powder-coated bevelled front end plate, powder-coated trough support for frame, small plastic parts, screws, nuts - Illustrated assembly instructions Item 7683 is suitable as a hydraulic tilt drive.

No longer available

Product number: 4915

€ 289,00 * € 343,00 * (15.74% saved)
Details
%
Tank assembly oval tractor 2-axle trailer, white. (284
Tank assembly oval tractor 2-axle trailer, white. (284
Tank assembly oval tractor, 2-Achs Anh Änger, white. (284).

No longer available

Product number: 4673

€ 274,99 * € 299,00 * (8.03% saved)
Details
Kippspindelantrieb SPIN370 1: 16
Kippspindelantrieb SPIN370 1: 16
1x Kippspindelantrieb SPIN370 1: 16 trapezoidal spindle, rear receptacle with ball bearings. 12V motor with gear. Aluminum. Unpainted. Pre-assembled. 60 x 400mm

Available immediately, delivery time: 1-4 days

Product number: 9881

€ 264,99 *
Rundmulde Sandmaster MUL320 1: 16.
Rundmulde Sandmaster MUL320 1: 16.
1x round trough SandMaster MUL320 1:16. Bolted round trough made of aluminum. External tailgate, automatic tailgate locking. Unpainted. Cylinder dummy & tipping bearing. 390x175x95mm For 3-axle tipper. Attention only for raised chassis! Raising kit required! e.g. article 8287

Available immediately, delivery time: 1-4 days

Product number: 9882

€ 283,49 *
%
FineLine flatbed body for Tamiya Volvo FH16 Timber
FineLine flatbed body for Tamiya Volvo FH16 Timber
FineLine flatbed body for Tamiya Volvo FH16 Timber Truck. Body made of polystyrene. Includes diffusers in LED look and wood inlays. The item is delivered unpainted as a kit. In the photos it is shown assembled with additional accessories for an additional charge.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 12820

€ 119,00 * € 129,00 * (7.75% saved)
Dump body painted, white, for Peterbilt without
Dump body painted, white, for Peterbilt without
Trough body painted white for Peterbilt without sleeper and Scania CR19. With low trough front wall. (2110). Technical data: Length (on the ground) 400mm Width 170mm Max. height 98mm Kit contains: - Completely finished bevelled and drilled trough body, powder-coated side reinforcement frame, powder-coated tailgate and reinforcement frame for tailgate, powder-coated tailgate bearing, powder-coated bevelled front end plate, powder-coated trough support for frame, small plastic parts, screws, nuts - Illustrated assembly instructions Item 7683 is suitable as a hydraulic tipping drive.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 4910

€ 273,60 *
Tipper body painted, red, for DAF XF105 SC, Scania
Tipper body painted, red, for DAF XF105 SC, Scania
Trough body painted, red, for DAF XF105 SC, Scania Highline, MAN TGX XLX, Actros. Kit 2116. With high trough front wall. Technical data: Length (on the ground) 400mm Width 170mm Max. height 126mm Kit contains: - Completely finished bevelled and drilled trough body, powder-coated side reinforcement frame, powder-coated tailgate and reinforcement frame for tailgate, powder-coated tailgate bearing, powder-coated bevelled front end plate, powder-coated trough support for frame, small plastic parts, screws, nuts - Illustrated assembly instructions Item 7683 is suitable as a hydraulic tilt drive.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 4914

€ 282,60 *
Wells construction, tractor, white (290)
Wells construction, tractor, white (290)
Trough body, tractor, white (290). Technical data:Length 430mmWidth 160mmHeight 140mmWeight approx. 1,1kgFor frame width 60mm.Article 7683 is suitable as a hydraulic tilt drive.Scope of delivery:Floor of trough body (aluminum, natural), drilledFront wall of trough body (aluminum, natural), folded and drilledSide walls, inside (aluminum, natural), folded and drilledTailgate, inside (aluminum, natural), folded and drilledParts for trough bearing (tilt hinge), tailgate lock, tailgate hinges, catch and support, etc., (plastic, black) Side walls, powder-coatedTailgate and front supports (powder-coated)All small parts required for completion, screws, nuts, washers, etc.Illustrated assembly instructions
1

End of life - article no longer available!

Product number: 4678

€ 212,40 *
Details
Wells construction, tractor, red (291)
Wells construction, tractor, red (291)
Trough body, tractor, red (291). Technical data:Length 430mmWidth 160mmHeight 140mmWeight approx. 1,1kgFor frame width 60mm.Item 7683 is suitable as a hydraulic tilt drive.Scope of delivery:Floor of trough body (aluminum, natural), drilledFront wall of trough body (aluminum, natural), folded and drilledSide walls, inside (aluminum, natural), folded and drilledTailgate, inside (aluminum, natural), folded and drilledParts for trough bearing (tilt hinge), tailgate lock, tailgate hinges, catch and support, etc., (plastic, black) Side walls, powder-coatedTailgate and front supports (powder-coated)All small parts required for completion, screws, nuts, washers, etc.Illustrated assembly instructions
1

End of life - article no longer available!

Product number: 4679

€ 212,40 *
Details
Wells construction, tractor, silver (292)
Wells construction, tractor, silver (292)
Trough body, tractor, silver (292) Technical data:Length 430mmWidth 160mmHeight 140mmWeight approx. 1,1kgFor frame width 60mm.Article 7683 is suitable as a hydraulic tilt drive.Scope of delivery:Floor of trough body (aluminum, natural), drilledFront wall of trough body (aluminum, natural), edged and drilledSide walls, inside (aluminum, natural), edged and drilledTailgate, inside (aluminum, natural), edged and drilledParts for trough bearing (tilt hinge), tailgate lock, tailgate hinges, catch and support, etc., (plastic, black) Side walls, powder-coatedTailgate and front supports (powder-coated)All small parts required for completion, screws, nuts, washers, etc.Illustrated assembly instructions

No longer available

Product number: 4680

€ 212,40 *
Details
Tank assembly oval tractor, 2-Achs Anh Änger polished
Tank assembly oval tractor, 2-Achs Anh Änger polished
Tank assembly oval tractor, 2-Achs Anh Änger polished. (285).

No longer available

Product number: 4674

€ 289,80 *
Details
%
FineLine building material body for Tamiya Volvo FH16 chassis
FineLine building material body for Tamiya Volvo FH16 chassis
FineLine building material structure for Tamiya Volvo FH16 chassis. Structure made of polystyrene. Includes etched handles and neodymium magnets. The item is delivered unpainted as a kit. In the photos it is assembled and shown with additional accessories that are subject to an additional charge. The FH16 driver's cab including chassis is also not included!

Ready to ship in 5 days, delivery time 1-4 days

Product number: 12808

€ 239,00 * € 259,00 * (7.72% saved)