Pendants

Alu warning signs with decor. (2 piece). Eg for low loaders

Aluminum warning signs with decoration. (2 pieces). For example for Goldhofer low loaders. Aluminum warning signs for low loaders and trailers.Scope of delivery:2 aluminum warning signs with integrated holder, warning decoration, fastening screws.

Available immediately, delivery time: 1-4 days

Product number: 11683

€ 28,99 * € 29,99 * (3.33% saved)

Subscriptions

Ramp drive for Goldhofer trailer TU-4 (Carson). With

Ramp drive for Goldhofer TU-4 trailers (Carson). With motor for 7,2-9,6V. Ramp drive compatible with the Goldhofer TU4 low-loader trailer from Carson (item 10831 - not included). The drive set is mounted on the model and uses a geared motor to control the ramps. The upper and lower end positions are each secured with a limit switch! The limit switches are pre-wired and ready for installation. Only the wires need to be soldered to the motor! A battery voltage of 7,2-9.6 volts is recommended for operation. If operation with a higher voltage (e.g., 12V) is absolutely necessary, you can use a speed controller and operate it with only approximately 60% of the servo travel. As a major highlight, the ramps can still be moved laterally! Even though remote control is not possible, the semi-trailer low loader can still be driven on by very small models! Scope of delivery: - Geared motor - Worm gear (worm pre-mounted on shaft) - Limit switch, pre-mounted and wired - New, continuous shaft for ramps - Side end caps for shaft - New ramp brackets, compatible with the new shaft (laterally adjustable!) - Gearbox housing base plate (serves as a drilling template) - Gearbox housing cover (left and right) - Instructions, screws, cables. Operation is possible with a reversing switch or speed controller (not included!). Speed controller: Thor4 (item 3020). Reversing switch: items 9856, 3569.

Available immediately, delivery time: 1-4 days

Product number: 11440

€ 149,00 *

Subscriptions

Carson Goldhofer-TU4 flatbed trailer Tamiya scale

Carson Goldhofer-TU4 low loader trailer, Tamiya scale. Kit with assembly instructions. With 2 access ramps and support. Unpainted. Weight approx. 5000g. (907400) - Kit, laser-cut sheet steel, one-piece ramps (manually foldable and adjustable) - Double ball-bearing bogie - Leaf-sprung axles with pedal compensation - Rear support manually adjustable - 7-chamber taillights - License plate holder - Semi-circular fender - 16 ball-bearing wheels - Wooden supports - Widening - Underrun protection - Decal sheet - Assembly instructions Technical data: Length: 855mm Width: 195mm Height: 265mm A motor-driven ramp drive is available under item number 11440. The optional item 11815 is available as a wooden transport box. Real wood planking for the bed is available as item 11824 here in the shop.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 10831

€ 585,50 * € 695,00 * (15.76% saved)

Subscriptions

Carson 2 axle central axle dump trailer

Carson 2-axle central axle tipping trailer New product for the 2019 toy fair. Ideal addition to the Arocs 3348 rear tipper from TamiyaTechnical dataLength 570mmWidth 190mmHeight 200mmWeight 3kgExternal dimensions of the tipping trough: 397x187x80mmSteel frame, laser cut and weldedTrough made of hard PVC8-way ball bearing wheelsOff-road wide tires with rims7-chamber tail lightsTrailer axles with air spring dummiesAutomatic 2-hook rear wall locking accessoriesSpindle drive, article 9043 (not included)Gear motorSwitch dump truckTowing hitch (article 7876, not included)7-chamber lighting board 7,2V (article 3104, not included)License plate lighting 7,2VAlu-rims round hole article 9979 (not included)Aluminum rims long hole article 5612 (not included)The manual drawbar support cannot be replaced by the electric support of the Fliegl Stonemaster!The tractor shown in some pictures is NOT included in the scope of delivery and serves as an application example.

Available immediately, delivery time: 1-4 days

Product number: 11354

€ 427,60 * € 520,00 * (17.77% saved)

Subscriptions

Transport box made of 9mm birch multiplex. The box is

Transport box made of 9mm birch plywood. The box is ready to use, finished with 2K clear lacquer. A sturdy, foldable metal handle is recessed into the top. Dimensions for the Carson TU4! The included sliding base allows for the mounting of the provided blocks, which secure and raise the model. The model then rests on the frame sections, guaranteeing that there will be no flat spots on the tires. Internal dimensions: Length: 850mm, Width: 220mm, Height: 280mm. External dimensions: Length: 880mm, Width: 240mm, Height: 320mm. Weight: 8,2kg

Available immediately, delivery time: 1-4 days

Product number: 11815

€ 113,00 *

Subscriptions

Tip:

Carson 2-axle stake trailer. Licensed by Ernst Riedler

Carson 2-axle stake trailer. Licensed by Ernst Riedler Fahrzeugbau- und Vertriebsges.mbH. New for the 2020 Toy Fair. Available now from stock! Kit, unpainted. The 2-axle stake trailer from "Riedler Fahrzeugbau" reflects the same appealing workmanship and appearance as the original, making it a distinctive companion on real roads and on model tracks. Combined with the TAMIYA Volvo FH16 timber truck, this articulated vehicle becomes a workhorse and is in no way inferior to the original. The robust steel frame, in conjunction with the aluminum stakes, allows for a payload of approximately 5.500g. To ensure that the different log lengths fit optimally against the stake posts, these are adjustable and freely positionable on the chassis frame. An optional accessory set (item no.: 500907623, including spare wheel and holder, two compressed air tanks, and a lashing kit) is available to further enhance the 2-axle stake trailer. For use with the TAMIYA Volvo FH16 tractor unit, the CARSON drawbar (item no.: 7876) is required; it is mounted to the existing frame end crossmember. Technical details: Scale 1:14; Torsionally rigid steel frame in sandwich construction; Frame made of 3 and 1 mm steel sheet, laser-cut and CNC bent; Turntable made of steel sheet in sandwich construction; Bearing turntable (adjustable) with sliding pads for easy maneuvering; Drawbar (one-piece) made of fiber-reinforced plastic with checker plate application; For easier hitching, the drawbar is... Two tension springs held at a coupling height of 75 mm. One-piece stanchions milled from solid aluminum. Stanchion brackets can be loosened via two grub screws and repositioned or removed as needed. Trailer axles with dummy air springs. Ball-bearing chrome rims with wide tires. Solid aluminum underride guard (left/right). Mudguards, splash guards, and bumper mud flap set. CNC-milled aluminum rear bumper. 7-chamber taillights, license plate holder, and work lights included. Decal set. Dimensions: L x W x H: 620 x 190 x 305 mm. Weight: 2.600 g. Optionally available: 500907623 Accessory kit for 2-axle Riedler stake trailer. *Officially Licensed by Ernst Riedler Fahrzeugbau- und Vertriebs.mbH. A suitable wooden transport box for this model is optionally available as item 12002.

Available immediately, delivery time: 1-4 days

Product number: 11739

€ 429,00 * € 510,00 * (15.88% saved)

Subscriptions

Carson accessories for Riedler stake trailers. Air boiler and much more

Accessories for Riedler stake trailers. Air boiler, spare wheel including holder, chain

Ready to ship in 5 days, delivery time 1-4 days

Product number: 11755

€ 67,98 * € 71,99 * (5.57% saved)

Subscriptions

Lashing set (universal) for low loaders. For example for Goldhofer

Lashing kit (universal) for low-loaders. For example, for Goldhofer low-loaders. Scope of delivery as per product photo.

Available immediately, delivery time: 1-4 days

Product number: 11682

€ 27,99 * € 29,49 * (5.09% saved)

Subscriptions

2-axle dolly, Carson. With saddle plate for mounting

1x 2-axle dolly, Carson. With fifth wheel for mounting Tamiya and Carson trailers. With dummy air springs. Supplied as a kit. Kit of a 2-axle dolly. Rigid axle adjustable in length and height. With dummy air springs. Technical data: Length: 365mm Width: approx. 195mm Height: approx. 85mm

Available immediately, delivery time: 1-4 days

Product number: 7891

€ 289,00 * € 325,00 * (11.08% saved)

Subscriptions

Post for von Carson timber transport trailers, aluminum

Post for von Carson timber transport trailers, aluminum. For Riedler fans. 5-piece set of stanchions with screws.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 12084

€ 49,85 *

Subscriptions

Aluminum cylinder holder for Goldhofer low loader

Aluminium cylinder bracket for Goldhofer low loaders. Reinforced design, replaces the plastic brackets included in the kit. Package contents: 1 pair, 1x left, 1x right

Available immediately, delivery time: 1-4 days

Product number: 11681

€ 50,99 * € 55,99 * (8.93% saved)

Subscriptions

Carson 2-axle construction material trailer. Maximum payload of 5,5

Carson 2-axle building material trailer. Maximum payload of 5,5 kg. CNC-milled aluminum side walls. Locking with neodymium magnets. 500907624 The 2-axle building material trailer reflects its attractive workmanship and appearance, both in the original and in the model. This makes the trailer an unmistakable companion on real roads and as a model on the course. The torsion-resistant frame made of sheet steel enables a payload of approx. 5.500 g. A new suspension is also included, which can be optionally raised by 8 mm and thus compensates for the coupling level of a raised articulated tractor. However, this can also be installed without raising the suspension, both suspension variants are included in the kit. The installed shock absorber and air spring dummies function as on/off spring travel limiters. This enables a higher axle articulation and reproduces a true-to-original driving image. A matching optional accessory kit (500907623) refines the trailer with compressed air tanks, spare wheel with bracket and a lashing kit.Technical data Trailer length 700mm Trailer width 195mm Trailer height 225mm Trailer weight 4,1 kg Body length 550mm Body width 195mm Body height 130mm Board wall height 75mm Loading height 110mm Coupling height 75mmTechnical highlights Torsion-resistant steel frame in sandwich construction Frame made of 3 and 1 mm sheet steel, laser-cut and CNC bent Sheet steel bogie in sandwich construction Mounted bogie (adjustable) with sliding pad for easy maneuvering Drawbar (one-piece) made of fiber-reinforced plastic with checker plate application Torsion-resistant steel frame in sandwich construction CNC-milled aluminum side walls with detailed surface engravings The side walls are locked using neodymium magnets All 5 side walls are functional 5 hinges on each side boward wall 4 hinges on the rear boward wall Real wood floor application with ball bearings Solid underrun protection Detailed trailer axles with dummy air springs, optionally with a + 8mm lift (kit contains both versions with/without a lift)

Ready to ship in 5 days, delivery time 1-4 days

Product number: 12143

€ 479,00 * € 575,00 * (16.7% saved)

Subscriptions

Mudguard set, plastic, for low loader with bracket

Available immediately, delivery time: 1-4 days

Product number: 11686

€ 25,99 * € 26,99 * (3.71% saved)

Subscriptions

Widening set for low loaders. eg for Goldho low loaders

Widening set for low loaders. e.g. for Goldhofer TU-4 low loader. Made of plastic. 10 widenings and 10 pins. 1:14 widenings (10 pieces) for low loadersWidenings 1:14, made of plastic, with steel pin for fastening. Dimensions: 19,5mm, height 12,5mm, thickness 4mm, pins 2x16mmContents: 10 widenings and 10 pinsMatching wooden planks for widening the road are available as article 11681.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 12375

€ 21,48 * € 55,99 * (61.64% saved)

Subscriptions

Short wood trailer kit, Tamiya scale. Suitable for the Ar

Short wood trailer kit, Tamiya scale. Suitable for items 12093, 12094. With parking brake that is operated by a servo. (9409T). Short wood trailer (for TAMIYA vehicles)We are now offering a short wood trailer to match the short wood loading crane (PENZ) (item 12093). The trailer has a "tool box" with a flap that can be opened on both sides.An ON/OFF switch or part of the electronics can be housed in this if necessary. The fenders that are optionally available for other trailers are already included in the scope of delivery of the short wood trailer.The short wood trailer is equipped with a parking brake that is operated by a servo (not included).If the brake is applied, the supply voltage to the trailer can be switched off. The parking brake remains applied. This is particularly interesting if the trailer is parked for a longer period of time or on sloping terrain. The cargo and towing vehicles shown are NOT included in the kit!

Ready to ship in 8 days, delivery time 1-4 days

Product number: 12096

€ 845,99 *

Subscriptions

Carson 2-axle box trailer. Tamiya scale

Carson 2-Axle Box Trailer Tamiya Scale. Kit with instructions. 500907731

Available immediately, delivery time: 1-4 days

Product number: 13338

€ 525,00 * € 589,99 * (11.02% saved)

Subscriptions

Carson conversion kit for Tamiya stanchion telescopic trailer

Conversion kit for Tamiya US stanchion telescopic trailer. Includes European bumper, 7-chamber taillights, and long tube. 500907733

Available immediately, delivery time: 1-4 days

Product number: 13346

€ 79,00 * € 89,99 * (12.21% saved)

Subscriptions

1:14 trailer 2-axle with flatbed

1:14 2-axle trailer with flatbed. Kit of a 2-axle trailer with flatbed, made of metal, unpainted. The side walls can be opened. XJModel. 2-axle trailer kit suitable for the MAN F2000, unpainted, with a metal flatbed. The side walls can be opened. The MAN F2000, as a towing vehicle, has the item number 13106. Required for operation: Towing vehicle. Scope of delivery: 2-axle trailer kit, unpainted. Attachments: Aluminum rims. Unpainted metal flatbed. Crossbar and trailer coupling for item 13106. Assembly instructions. Dimensions: Length: 485 mm without drawbar. Length: 610 mm with drawbar. Width: 194 mm. Height: 285 mm. Weight: 3,1 kg. We can also supply the 2-axle trailer painted and fully assembled. Please do not hesitate to contact us.

Available immediately, delivery time: 1-4 days

Product number: 13107

€ 440,00 * € 459,00 * (4.14% saved)

Subscriptions

Filter products