Volvo FH16 Globetrotter timber transporter in 1:14 scale. Driver's cab can be plugged in and removed at the top. Two lashing chains are included in the model. 300023805 RTR model painted blue. A beauty under the surface. A beast under the hood - Volvo FH 16 New 2019 at the Toy FairHere now as a ready-to-drive, assembled and painted Ready-to-Run model.With 4-channel remote control and MFC-03 - fully installed. With the Volvo FH 16 6x4 Globetrotter, Tamiya has managed to pull off a surprise at the 2019 Toy Fair. One innovation is that Tamiya has for the first time dispensed with a tiltable driver's cab and instead opted for a driver's cab that can be removed upwards. With 751 hp (552 kW), the original is a real powerhouse and ideal for use in the forests of northern Europe. The model dispenses with a playful design and impresses with clear lines and striking design elements such as the powerful front. The original model can be found with up to 5 axles, which can be perfectly implemented in the model by using various tuning components. Thanks to the wooden structure, which is currently rarely seen on courses around the world, the Volvo has an impressive length of 750mm and is therefore one of the largest Tamiya truck models. The scope of delivery is as follows: fully assembled model, driver's cab parts painted with TS-54 (light metallic blue). 3-speed gearbox, reinforced frame, wooden structure, add-on parts for the driver's cab (lamps, antenna, mirror), two lashing chains. Recommended accessories: Wooden loading crane, item 11431 Wooden loading crane with forestry support, item 11432 Stake trailer As is easy to see, the model offers a wide range of options for conversion. Please feel free to contact us, we will be happy to advise you and offer attractive complete packages to put together your dream truck. The accessories shown (tree trunks) are NOT included in the scope of delivery and are for illustration purposes. A transport box for the FH11814 is optionally available under item number 16.

Volvo FH16 Globetrotter TowTruck in 1:14 scale. Driver's cab can be plugged in and removed at the top. Tow truck / recovery vehicle. 300056362 Trade fair novelty 2020 TRADE FAIR NOVELTY 2020With the Volvo FH16 Tow Truck, TAMIYA is presenting the first truck with 4 axles and a steerable double axle at the front. The chassis has been converted to 8x4 and offers the ideal basis for the tow truck.With this truck model, Tamiya has achieved a coup that few model makers would have expected.The crane structure is extremely robust and consists of many metal parts. The crane is powered by an optionally available ACU unit (order number 300056553). With this unit, the crane can be moved up and down.The model is delivered as a kit and already includes numerous accessories, such as photo-etched parts for the radiator grille, turnbuckles with chains for securing the load and much more.The model has an impressive length of over 70 cm and is driven by the two rear axles. The TAMIYA TR Mighty Tuned Truck motor (35T) provides sufficient power.The FH16 is the first TAMIYA truck model in which the driver's cabin is firmly screwed on.Required accessories: At least 4-channel remote control 7.2V NiMH battery pack Charger TAMIYA TS paint for painting Steering servo + servo for manual transmission Speed ​​controller Lighting system for controlling the light functions optional. Sound module for the fully functional kit, the optionally available ACU unit (300056553) is also required to drive the crane arm. The photos with the blue painted "PEMA tow truck" show application examples with optional accessories and equipment features that are not part of the kit! Detailed reports on this model can also be found in the trade magazine Truck&Details in issues 6/2020, 1/2021 and 2/2021.

Tamiya Mercedes Benz Arocs 4151 rear tipper kit 8x4. 300056366 Unpainted. The tipping mechanism is available separately. Tamiya novelty 2021The TAMIYA truck for tough construction site use!The Mercedes Benz Acros 4151 8x4 is a real heavyweight on the construction site. TAMIYA has modified the tried and tested chassis for this truck:The truck has 4 axles like the original. The two rear axles are driven by a powerful 540 electric motor. The two front axles are articulated via a servo (available separately). The steering angle of the two axles is different so that a true-to-original driving behavior is achieved.The frame has a subframe to accommodate the newly designed tipping trough. The trough has been reinforced with a metal subframe and can be controlled via the optional TAMIYA ACU-01 unit (56545).The unmistakable design of the new Arocs is as unusual as the truck as a whole. For example, the look specially developed for construction vehicles includes a radiator grille in the so-called excavator tooth look, which is intended to convey the message: "Bite through and grab hold". In keeping with the robust appearance, special protective grilles for the lighting system are attached to the bumper.Technical dataImpressive trailers can be put together with the 667 mm long and around 4 kg heavy kit model. The tried and tested and robust TAMIYA truck technology can be found under the driver's cab, which can be tilted forwards. A new Mighty-Tuned 35T electric motor delivers its power to the two rear axles via a switchable 3-speed gearbox. A detailed aluminum ladder frame gives the model the necessary stability and flexibility. A drawbar (e.g. Carson 500907182) can be attached to the rear part of the frame and used to pull trailers. With the optionally available multifunctional unit, almost all of the sound and light functions of the original can be simulated in a deceptively realistic way. Required accessories: At least 4-channel remote control Steering servo Switching servo Colors Battery 7,2V Speed ​​controller Scope of delivery: Kit model Detailed instructions Electric motor 3-speed manual transmission Item 10832 is available as a tilt drive (not included). The photos of the red-painted AROCS show the result of our painting service. The kit is delivered unpainted. The individual paint job can be purchased optionally for a fee. Are you looking for a stable and functional storage or transport box? Take a look at the matching items 11814 or 12047.

Tamiya Scania 770 S 8x4/4 (56371) kit unpainted. SLT version. The 2023 novelty in the truck sector can be described as a consistent decision by the manufacturer Tamiya. The S-series of Scanias is growing. Tamiya brings a heavy-duty tractor machine. The TOP model from the S series of the Swedish manufacturer Scania - the SCANIA 770S 8x4/4.Scania is now the only manufacturer that still offers a V8 engine and defies the trend of downsizing and alternative drives.The most powerful truck in the series draws 3.700 Newton meters and 770 hp from the 16-liter V8 engine and thus conjures up a smile on the face of every professional driver and truck enthusiast.But it's not just the inner values ​​that count. The new 770 S comes with an aggressive front and the Scania's interior also leaves nothing to be desired in terms of equipment and space. The new 770S 8x4/4 tractor unit expands the series of Scania vehicles and is the logical step after the 770S and the R620. Tamiya is thus once again supplying a tractor unit after the Scania 770S Truck, the Volvo Tow Truck and the Arocs 4151 and has opted for the most powerful truck in the series. Thank you TamiyaTamiya article number 300056371The model has 4 axles, the rear two are driven. The two front axles are steering axles - the 2nd. Axle can be lifted!The aerodynamically designed driver's cab delights the scene.Driver's cab with high roof, aero package and stylish roof lamp bracket (can be retrofitted with LEDs).The driver's cab is attached from above or decreased upwards. The tilting mechanism with the mounting holes on the passenger side, often described as a "visual ugliness", no longer exists. The heavy-duty tower has several functional details that seem very well done: the tower paneling can be opened on both sides the 3 storage boxes can also be opened from the back the tank dummy holds the drive battery Details: 610 mm length 194 mm width 320 mm height - without antennas high roof mini radiator grille front lamp bracket (LEDs can be retrofitted) realistic roof lamp bracket (LEDs can be retrofitted) low bar faithful reproduction of the fittings (mirrors, antennas, exhaust system) true-to-scale interior fittings wide tires and wide rims 3-speed gearbox truck engine Mighty Tuned 35T (item 12788) trailer coupling (can be operated with optional servo) decoration set 770 driver figure faithful reproduction of the fittings (mirrors, antennas, heavy-duty tower, compressed air tank, fuel tanks, exhaust system, warning bars and lights) wide tires with chrome-plated wide rims for both front axles Ball bearings are supplied for the complete drive train.

Tamiya Mercedes Benz Arocs 3348 rear tipper kit 6x4. Pre-painted. The tilting mechanism is available separately. Pre-painted red/silver. The trough consists of a sturdy ABS part and has a movable and automatically unlocking tailgate. The payload is max. 10Kg and the trough can be tilted wirelessly using the optionally available ACU-01 spindle drive unit. (Article 10832). The trough is pre-painted in silver. The unmistakable design of the new Arocs is as extraordinary as the truck as a whole. The look, which was specially developed for construction vehicles, includes a radiator grille with the so-called excavator tooth look, which is intended to convey the message: “Bite through and grab hold”. In keeping with the robust appearance, special protective grilles for the lighting system are attached to the bumper. With the 576 mm long and around 3,5 kg heavy kit model, impressive teams can be put together. The proven and robust TAMIYA truck technology can be found under the forward-tilting driver's cab. A new Mighty-Tuned 35T electric motor delivers its power to the two rear axles via a switchable 3-speed transmission. A detailed aluminum ladder frame gives the model the necessary stability and flexibility. A special additional frame was installed for the trough, which makes the model particularly stable. The driver's cab parts are pre-painted red. A drawbar (e.g. Article 7876) and can be used to tow trailers. With the optionally available multifunctional unit, almost all sound and light functions of the original can be simulated deceptively realistically.Required accessories:- Min. 4 channel remote control e.g. Reflex 14 LCD 500501004 (14-channel LCD display)- 7.2V NiMH battery pack, charger- steering servo + servo for manual transmission- speed controller or TAMIYA multifunction unit MFC-03 item 8484 for the driving, light and sound functions- TAMIYA ACU-01 spindle drive unit (item 10832) for driving the trough. The ACU-01 is plugged into the multifunctional unit.Scope of delivery:Kit model with detailed instructions, electric motor, 3-speed manual transmission Technical details:- Kit model in 1:14 scale- Dimensions: length 576 mm, width 190 mm, height 267 mm- Scale 1:14- True-to-scale ABS body replica of the Arocs 3348, including handrails, steps, side mirrors and much more- One-piece loading tray for max.

1 Tamiya Mercedes Benz Actros 1851 GigaSpace 4x2. Kit. Unpainted. Complete package with drive battery, ball bearings, individual license plates and lighting set! Special set! Only while our stocks last! Special package consists of the following items: 7881 (Actros kit from Tamiya) 7446 (ball bearing set for 2-axle tractor) 8196 (battery pack 7,2V/4500mAh with Tamiya plug) 2732 (REFLEX license plate set of your choice) 8038 (1 pair of tail light boards 7,2V for Actros) 8040 (1 pair of headlight boards 7,2V for Actros) 8042 (sidelight set, LEDs for Actros) Only while our stocks last!

Volvo FH16 Globetrotter timber transporter in 1:14 scale. Driver's cab can be plugged in and removed at the top. Two lashing chains are included in the kit. 300056360 Trade fair novelty 2019. A beauty beneath the surface. A beast under the hood - Volvo FH 16 New product 2019 at the Toy FairWith the Volvo FH 16 6x4 Globetrotter, Tamiya managed to surprise everyone at the Toy Fair 2019. It has often been rumored whether Tamiya will bring a current Volvo onto the market after the FH 12. Look, here is the first timber transporter from Tamiya.Another innovation is that Tamiya has for the first time dispensed with a tilting driver's cab and instead opted for a driver's cab that can be removed upwards.With 751 hp (552 kW), the original is a real powerhouse and ideal for use in the forests of Northern Europe.The model dispenses with a playful design and impresses with clear lines and striking design elements such as the powerful front.The original model can be found with up to 5 axles, which can be perfectly implemented in the model by using various tuning components.Thanks to the wooden structure, which is currently rarely seen on courses around the world, the Volvo has an impressive length of approx. 750mm and is therefore one of the largest Tamiya truck models.The scope of delivery is as follows:KitDetailed and illustrated assembly instructionsElectric motor 540 TR motor (35T)Gearbox components, 3-speed manual gearbox2 metal differentials on the rear axlesRear tires with off-road profileReinforced frameWooden constructionEasily removable driver's cab, screwed, not tiltableAdditional driver's cab parts (lamps, antenna, mirror)Very detailed interiorTwo lashing chainsRequired accessoriesMultifunctional unit MFC-03 (item 8484)orDrive controller, e.g. SFR-1 (item 10974) or S22 (item 9182)Paints for painting the body componentsDrive battery 7,2VRemote control with at least 4 channelsSteering servo e.g. 645MG (Article 7968)Switching servo, e.g. CS-3 (item 8851)Recommended accessoriesSound moduleLight moduleWood loading crane item 11431Wood loading crane with forestry support item 11432Stake trailerWhen using an MFCxx, longer LED cables are required for the rear lights! (due to the longer frame).Longer LED cables: (not included)2x LED 3mm red with 1100mm strands: Article 113962x LED 3mm clear with 1100mm strands: Article 113972x LED 3mm yellow with 1100mm strands: Article 11398As is easy to see, the model offers a variety of options for conversion.Please feel free to contact us, we will be happy to advise you and offer attractive complete packages to put together your dream truck.The accessories shown (tree trunks, etc.) as well as optional equipment, paintwork, trailer, loading crane, etc.

1 complete SAVINGS package: MFC-01 with infrared system! 1x MFC-01 multifunctional unit 1x IR transmitter system for MFC-01 1x IR receiver system for MFC-01 This package consists of the following items: 7737: MFC-017920: IR transmitter extension for MFC-017921: IR receiver extension for MFC-01

Tamiya Scania 770 S (56373) kit 1/14 silver pre-painted The wishes of the model building community have been heard. Tamiya is bringing a bang for the new product in 2023. The TOP model from the S series of the Swedish manufacturer Scania.Scania is now the only manufacturer that still offers a V8 engine and defies the trend of downsizing and alternative drives.The most powerful truck in the series draws 3.700 Newton meters and 770 hp from the 16-liter V8 engine and thus conjures up a smile on the face of every professional driver and truck enthusiast.But it's not just the inner values ​​that count. The new 770 S comes with an aggressive front and the Scania's interior also leaves nothing to be desired in terms of equipment and space.The new 770 S tractor unit expands the series of Scania vehicles and is therefore the logical step after the R470 and the R620.After the Volvo Timber Truck, the Volvo Tow Truck and the Arocs 4151, Tamiya is once again delivering a tractor unit and has opted for the most powerful truck in the series. Thank you TamiyaTamiya article number 300056373The model has 3 axles, the rear two of which are driven. The aerodynamically designed driver's cab delights the scene.The driver's cab is attached from above or removed upwards. The tilting mechanism with the mounting holes on the passenger side, often described as "visually unsightly", is no longer available. Details: 532 mm length 193 mm width 307 mm height high roof mini grille front lamp bar (LEDs can be retrofitted) realistic roof lamp bar (LEDs can be retrofitted) low bar (LEDs can be retrofitted) side bar (side panel illumination lights) (LEDs can be retrofitted) faithful reproduction of the fittings (mirrors, antennas, exhaust system) true to the original interior wide tires and wide rims 3-speed gearbox decoration set pre-painted with Scania Vabis decor the driver's cab is pre-painted in TS-17 aluminum silver required accessories remote control with at least 4 channels steering servo shift servo speed controller 7,2V battery (racing pack) charger paint Tamiya recommends using the MFC-03 as a sound module, lighting system and speed controller the instructions for the Tamiya Scania 770 S are available for download

Tamiya Mercedes Benz Arocs 3348 rear tipper kit 6x4. Unpainted. The tipping mechanism is available separately. The trough consists of a sturdy ABS part and has a movable and automatically unlocking tailgate. The maximum payload is 10 kg and the trough can be tipped wirelessly using the optionally available ACU-01 spindle drive unit. (Item 10832) The unmistakable design of the new Arocs is as unusual as the truck as a whole. For example, the look specially developed for construction vehicles includes a radiator grille in the so-called excavator tooth look, which is intended to convey the message: -Bite through and grab hold-. In keeping with the robust appearance, special protective grilles for the lighting system are attached to the bumper. With the 576 mm long and around 3,5 kg heavy kit model, impressive trailers can be put together. The tried and tested and robust TAMIYA truck technology can be found under the driver's cab, which can be tilted forwards. A new Mighty-Tuned 35T electric motor delivers its power to the two rear axles via a switchable 3-speed gearbox. A detailed aluminum ladder frame gives the model the necessary stability and flexibility. A special additional frame was installed for the trough, which makes the model particularly stable. A tow bar (e.g. item 7876) can be attached to the rear part of the frame and used to pull trailers. With the optionally available multifunctional unit, almost all of the sound and light functions of the original can be simulated in a deceptively realistic way. Required accessories: - Min. 4 channel remote control e.g. Reflex 14 LCD 500501004 (14-channel LCD display) - 7.2V NiMH battery pack, charger - TAMIYA TS paint for painting - steering servo + servo for manual transmission - speed controller or TAMIYA multifunction unit MFC-03 article 8484 for the driving, light and sound functions - TAMIYA ACU-01 spindle drive unit (article 10832) for driving the trough. The ACU-01 is plugged into the multifunctional unit.Scope of delivery:Kit model with detailed instructions, electric motor, 3-speed manual transmission Technical details:- Kit model in 1:14 scale- Dimensions: length 576 mm, width 190 mm, height 267 mm- Scale 1:14- True-to-scale ABS body replica of the Arocs 3348, including handrails, steps, side mirrors and much more- One-piece loading tray for max. 10 kg payload- TAMIYA 3-axle chassis with reinforced frame- Tilting spindle unit available separately under item: 10832- Includes TR mighty-tuned motor for perfect power development on the two driven rear axles- New rear tires, bumper and mudguards- 3-speed manual transmission can be controlled via optional 4-channel remote control- Leaf springs on the axles and rear shock absorbers with coil springs- Recommended accessories: MFC-03 multifunctional unit (8484) for the driving, light and sound functions ACU-01 spindle drive unit (10832) for the tilt function

Tamiya Scania 770 S (56368) kit 1/14 Unpainted. The wishes of the model building community have been heard. Tamiya is bringing a great new product for 2022. The TOP model from the S series of the Swedish manufacturer Scania.Scania is now the only manufacturer that still offers a V8 engine and defies the trend of downsizing and alternative drives.The most powerful truck in the series draws 3.700 Newton meters and 770 hp from the 16-liter V8 engine and thus conjures up a smile on the face of every professional driver and truck enthusiast.But it's not just the inner values ​​that count. The new 770 S comes with an aggressive front and the Scania's interior also leaves nothing to be desired in terms of equipment and space.The new 770 S tractor unit expands the series of Scania vehicles and is therefore the logical step after the R470 and the R620.After the Volvo Timber Truck, the Volvo Tow Truck and the Arocs 4151, Tamiya is once again supplying a tractor unit and has opted for the most powerful truck in the series. Thank you TamiyaTamiya article number 300056368The model has 3 axles, the rear two of which are driven. The aerodynamically designed driver's cab delights the scene.The driver's cab is attached from above or removed upwards. The tilting mechanism with the mounting holes on the passenger side, often described as "visually unsightly", is no longer available. Details: 532 mm length 193 mm width 307 mm height high roof mini radiator grille front lamp bar (LEDs can be retrofitted) realistic roof lamp bar (LEDs can be retrofitted) low bar (LEDs can be retrofitted) side bar (side panel illumination lights) (LEDs can be retrofitted) faithful reproduction of the fittings (mirrors, antennas, exhaust system) true-to-original interior fittings wide tires and wide rims 3-speed gearbox decoration set with Scania Vabis decor The color shown is TS-58 light blue pearl effect and looks even better in real life than in photos. For the first time, the fenders are white, which makes it easier to paint the fenders in the color of the vehicle. Required accessories Remote control with at least 4 channels Steering servo Shift servo Drive controller 7,2V battery (Racing-PAck) Charger Paint Tamiya recommends using the MFC-03 as a sound module, lighting system and drive controller The instructions for the Tamiya Scania 770 S are available for download

1x Tamiya MFC-02 multifunctional unit for tractors. Contains 33 realistic sound, light and function options for tractors in Tamiya scale. (53957) Sounds recorded on a V8 big block and a turbo engine! Functionality: Sounds: Acoustic signal, engine start, idle, upshift, downshift, horn, indicator, alarm and more. Light: Position light (parking light), headlights, fog lights, additional roof lamps, indicators, hazard lights, brake light, reversing light. Additional functions: Electronic speed controller with sensitive control and brake, vibration function (shaking of the driver's cab), connection of MP3 player possible. Scope of delivery: Loudspeaker, LEDs, cable, vibration module, central control, instructions. This is not a stock item! We will be happy to order the MFC-02 for you!

1x Tamiya KING HAULER kit 1/14 3-axle American tractor with drive and fifth wheel coupling. Complete kit for building a driving model. To complete the model as a driving model, you will also need:Paint(s)Drive batteryRC components (remote control, servos, etc.)The kit contains:Pre-drilled and threaded frame components.All parts for 2 driven axles with differential.1 non-driven steering axle.Leaf spring packages for all axles.Rims and tires.Mud flaps.Unpainted plastic driver's cab. (Polystyrene)Unpainted plastic parts for attachment to the driver's cab.Windows, mirrors, windshield wipers and other attachments.Original interior fittings.Functional fifth wheel coupling.Headlights, indicators, tail light units - without lighting fixtures.Switchable 3-speed gearbox (kit), cardan shaft.Electric motor (7,2V).Plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, etc.Decorative set (stickers).Richly illustrated, comprehensive assembly instructions.Technical data:Wheelbase: 447mmLength: 600mmWidth: 183mmWeight: 2800gr.

Tamiya GLOBE LINER kit 1/14 3-axle American tractor with drive and fifth wheel coupling. Complete kit for building a driving model. To complete the model as a driving model, you will also need:Paint(s)Drive batteryRC components (remote control, servos, etc.)The kit contains:Pre-drilled and threaded frame components.All parts for 2 driven axles with differential.1 non-driven steering axle.Leaf spring packages for all axles.Rims and tires.Mud flaps.Unpainted plastic driver's cab. (Polystyrene)Unpainted plastic parts for attachment to the driver's cab.Windows, mirrors, windshield wipers and other attachments.Original interior fittings.Functional fifth wheel coupling.Headlights, indicators, tail light units - without lighting fixtures.Switchable 3-speed gearbox (kit), cardan shaft.Electric motor (7,2V).Plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, etc.Decorative set (stickers).Richly illustrated, comprehensive assembly instructions.Technical data:Wheelbase: 350mmLength: 500mmWidth: 183mmWeight: 2640g.

1 Tamiya KNIGHT HAULER kit 1/14 3-axle American tractor with drive and fifth wheel coupling. Complete kit for building a driving model. To complete the model as a driving model, you will also need:Paint(s)Drive batteryRC components (remote control, servos, etc.)The kit contains:Pre-drilled and threaded frame components.All parts for 2 driven axles with differential.1 non-driven steering axle.Leaf spring packages for all axles.Rims and tires.Mud flaps.Unpainted plastic driver's cab. (Polystyrene)Unpainted plastic parts for attachment to the driver's cab.Windows, mirrors, windshield wipers and other attachments.Original interior fittings.Functional fifth wheel coupling.Headlights, indicators, tail light units - without lighting fixtures.Switchable 3-speed gearbox (kit), cardan shaft.Electric motor (7,2V).Plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, etc.Decorative set (stickers).Richly illustrated, comprehensive assembly instructions.Technical data:Wheelbase: 447mmLength: 614mmWidth: 190mmWeight: 3100gr.

1x Tamiya MAN TGX (56325) kit 1/14 MAN TGX 26.540 6x4 XLX. Unpainted. 3-axle. Euro 5 / 2013 version. **No longer available** Complete kit for building a driving model. To complete the model as a driving model, you will also need:Paint(s), drive battery, RC components (remote control, servos, etc.)The kit contains:Frame components with pre-drilled and threaded holes.All parts for 2 driven axles with differential.1 non-driven steering axle.Leaf spring packages for all axles.Rims and tires, plastic fenders.Unpainted plastic driver's cab. (Polystyrene)Unpainted plastic parts for attaching to the driver's cab.Windows, mirrors, windshield wipers and other attachments.True-to-original interior fittings, functional fifth wheel coupling. Headlights, indicators, taillight units - without lighting fixtures.Switchable 3-speed gearbox (kit), cardan shaft, electric motor (7,2V), plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, etc., decoration set (stickers). Richly illustrated, comprehensive assembly instructions.

1x Tamiya Mercedes Benz Actros 3363 GigaSpace 6x4. Kit. With PEARL-BLUE (TS-89) painted sprues for the body parts. (56354) Complete kit for building a driving model. To complete the model as a driving model, you will also need: Drive battery, RC components (remote control, servos, etc.) The kit contains: Ready-drilled and threaded frame components. All parts for 2 driven axles with differential. 1 non-driven steering axle. Leaf spring packages for all axles. Rims and tires. Painted plastic driver's cab. Plastic fenders. Painted plastic parts for attachment to the driver's cab. Windows, mirrors, windshield wipers and other attachments. True-to-original interior. Functional fifth wheel coupling. Headlights, indicators, taillight units - without lighting units. Sun visor, signal horns.Roof lamp bracket with 5 headlights (without bulbs).Front lamp bracket with 4 rectangular headlights.Switchable 3-speed gearbox (kit), cardan shaft. Electric motor (7,2V)Plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, stickers, etc.Richly illustrated, comprehensive assembly instructions.Technical data:Scale: 1:14Length:538mmWidth: 195mmHeight: 305mm

1x Tamiya GRAND HAULER MATTE BLACK 1/14 3-axle American tractor with drive and fifth wheel coupling. NEW 2018. Tamiya. Complete kit for building a driving model. To complete the model as a driving model, you will also need:Paint(s)Driver batteryRC components (remote control, servos, etc.)The kit contains:Pre-drilled and threaded frame components.All parts for 2 driven axles with differential.1 non-driven steering axle.Leaf spring packages for all axles.Rims and tires.Mud flaps.Painted plastic driver's cab. (Polystyrene)Painted plastic parts for attachment to the driver's cab.Driver's cab, H, P, Q12 and Q15 parts are made of black plastic and pre-painted in TS-40 metallic black (matt). Windows, mirrors, windshield wipers and other attachments.Exhaust pipes made of metal.Original interior fittings.Functional fifth wheel coupling.Headlights, indicators, tail light units - without lighting fixtures.Switchable 3-speed gearbox (kit), cardan shaft.Electric motor (7,2V).Plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, etc.Decorative set (stickers).Matching driver figure.Richly illustrated, comprehensive assembly instructions.Technical data:Length: 692mmWidth: 190mmHeight: 300mmWeight: 3200gr.Recommended multifunctional unit: MFC-01 (American sound) - article 7737.It is also recommended to use ball bearings instead of plain bearings during construction (option: article 9707), and to control the steering at least with the handlebar (article 6612). We have additional accessories available for alternative and optimized drive concepts.

1x Tamiya MAN TGX (56370) kit 1/14 MAN TGX 26.540 6x4. PRE-PAINTED. 3-axle. Version Euro 5 / 2013. Body parts are painted in the color METALLIC LIGHT BLUE (TS-54). Body parts are pre-painted metallic light blue! Complete kit for building a driving model. To complete the driving model, the following are also required:Drive battery, RC components (remote control, servos, etc.)The kit contains:Pre-drilled and threaded frame components.All parts for 2 driven axles with differential.1 non-driven steering axle.Leaf spring packages for all axles.Rims and tires, plastic fenders.Painted plastic driver's cab. (Polystyrene)Painted plastic parts for attachment to the driver's cab.Windows, mirrors, windshield wipers and other attachments.Original interior fittings, functional fifth wheel coupling. Headlights, indicators, taillight units - without lighting fixtures.Switchable 3-speed gearbox (kit), cardan shaft, electric motor (7,2V)Plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, etc., decoration set (stickers). Richly illustrated, comprehensive assembly instructions.Dimensions:Length: 526mmWeight: approx. 3kg

Set consisting of RS1 and circuit boards for front and rear. Speed ​​controller, lighting system, sound module in one incl. Complete lighting for Scania 770 S from Tamiya. Robust speed controllerThe speed controller can be permanently loaded with 25A and, thanks to the 32kHz control, is also suitable for bell-armature motors. It offers manual transmission support for up to four gears, a clutch function, handbrake, optional inertia simulation and a cruise control function, which does not work like the competition (stick deflection controls acceleration), but like the original: the throttle deflection controls the speed and the cruise control is activated by pressing a button. Pressing the button again or braking deactivates the cruise control.Extraordinary soundKraftwerK is once again setting standards in programmability. While the competition can only use a few sound snippets for the driving sound, KraftwerK can use as many as you like and it works as follows: First, the speed range is defined, e.g. 500 rpm immediately after starting and 2300 rpm when the engine is running out. Then sound snippets are stored for any number of areas and defined with base speed, minimum and maximum. At minimum the sound is faded in at a speed-adjusted level, at it is played at full volume and at a speed of 1:1, and up to maximum it is again adjusted to the speed and finally faded out. The snippets can and should of course overlap, which can create an ultra-realistic sound. In total there are three sound tracks: 2x acceleration and 1x deceleration. The first sound track is the normal driving sound, the second sound track can either be mixed proportionally as a load or switched. The third sound track is the delay sound and is automatically added when you release the joystick. If that's too complicated for you, you'll be pleased to know that 3 high-quality sounds are already included with the module. In the future there will also be a sound library with premium sounds that can be purchased for a few euros and downloaded via the ControlPanel and saved on your own module.Unlimited expandabilityKraftwerK's leading role in the field of RC bus systems is now fully evident in the RS1. The RS6 can be expanded as required via the 1 EasyBus outputs. Lighting boards, switching extensions, servo controls and much more can be controlled via the EasyBus. But the RS1 has one more special gimmick: on the upper side there are four individual sockets that are barely visible and can be used to plug in another module. The first module in this series is the BL8A, an 8A brushless controller designed for hydraulic pumps.Versatile connections / technical dataBattery (6 - 20V)Motor 25A, up to 32kHz, brush and bell-armature motor5 servo inputs or SUMD, IBUS, SBUS, CPPM5 servo outputs6 bus outputs8 switching outputs 500mA2 switching outputs 10AInfrared transmitter (diode included)SpeakerDimensions 63x44x28mmCharacteristics of the drive controllerOperating voltage 6-20VBEC 6V / 3ATimension frequency adjustable up to 32kHZClutch functionHandbrake functionManual transmission supportAdjustable inertia simulationAdjustable cruise controlProtection functions: battery undervoltage, motor short circuit, overtemperatureFunctions for servo outputsProportional functionProportional function directPropFunction switchedTwo positionsThree positionsFifth wheel plateTrailer supports MotorDump truck/tipper MotorRamp/Platform MotorManual transmissionSound featuresUnlimited number of sounds10-15 sounds that can be played simultaneouslyPlay modes: Touch, loop, once, permanent, random, stop pointsFormats: WAV, MP3 Usable sampling rate: All (automatic conversion to 44.100)Volume control: Potentiometer, via channel, via softwareSD card: max.

1x Tamiya GRAND HAULER kit 1/14 3-axle American tractor with drive and fifth wheel coupling. NEW 2015! Complete kit for building a driving model. To complete the model as a driving model, you will also need:Paint(s)Drive batteryRC components (remote control, servos, etc.)The kit contains:Pre-drilled and threaded frame components.All parts for 2 driven axles with differential.1 non-driven steering axle.Leaf spring packages for all axles.Rims and tires.Mud flaps.Unpainted plastic driver's cab. (Polystyrene)Unpainted plastic parts for attachment to the driver's cab.Windows, mirrors, windshield wipers and other attachments.Exhaust pipes made of metal.Original interior fittings.Functional fifth wheel coupling.Headlights, indicators, tail light units - without lighting fixtures.Switchable 3-speed gearbox (kit), cardan shaft.Electric motor (7,2V).Plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, etc.Decorative set (stickers).Matching driver figure.Richly illustrated, comprehensive assembly instructions.Technical data:Length: 692mmWidth: 190mmHeight: 300mmWeight: 3200gr.

1 Tamiya Mercedes Benz Actros 3363 GigaSpace 6x4. Kit. Unpainted. 300056348. Complete kit for building a driving model. To complete the model as a driving model, you will also need:Paint(s), drive battery, RC components (remote control, servos, etc.)The kit contains:Frame components with pre-drilled and threaded holes.All parts for 2 driven axles with differential.1 non-driven steering axle.Leaf spring packages for all axles. Rims and tires.Unpainted plastic driver's cab. Plastic fenders.Unpainted plastic parts for attaching to the driver's cab.Windows, mirrors, windshield wipers and other attachments.Original interior fittings.Functional fifth wheel coupling.Headlights, indicators, taillight units - without lighting fixtures. Sun visor, signal horns.Roof lamp bracket with 5 headlights (without bulbs).Front lamp bracket with 4 rectangular headlights.Switchable 3-speed gearbox (kit), cardan shaft. Electric motor (7,2V).Plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, stickers, etc.Richly illustrated, comprehensive assembly instructions.Recommended accessories:Remote control REFLEX-Stick Multi Pro 14 (item 9494).Multifunctional unit MFC-03 for lighting, sound, speed controller. Article 8484.Technical details:Detailed replica of the air pressure tank and battery boxDetailed replica of the fuel and AdBlue tanksDetailed replica of the catwalk with photo-etched partsExhaust replica with integrated storage compartmentChrome-plated compressed air hornsRoof lamp bracket (lighting can be retrofitted with LEDs 1x 9733 (2-pack) + 3x 9732 (1-pack)Lamp bracket bumper (lighting can be retrofitted with LEDs 2x 9733 (2-pack)Side marker lights (lighting can be retrofitted with LEDs (3mm))Aerodynamic and replica chrome package with bump barPrototypical 2-axle driveABS injection-molded bodyTiltable driver's cab (forwards)Original interiorRemovable fender half shellsAluminum ladder frame with plastic connectorsRear axle with Metal bevel gearsMetal bevel gear differential3-speed manual transmissionFifth wheel plate (suitable for all Tamiya and Carson trailers)Leaf spring packages with shock absorbers on the front and rear axlesAluminum front axleAluminum drive shaftsElectric motor type 540Dimensions: Length 538 mm, width 195 mm, height 305 mmScale 1:14Technical data:Length 538 mmWidth 195 mmHeight 305 mm

Tamiya Scania R620 (56327) kit 1/14 Scania R620 6x4 Highline. PAINTED BLUE! Color: Tamiya color TS-51. Complete kit for building a driving model. To complete the model as a driving model, you will also need:Drive battery, RC components (remote control, servos, etc.)The kit contains:Pre-drilled and threaded frame components.All parts for 2 driven axles with differential.1 non-driven steering axle.Leaf spring packages for all axles.Rims and tires, plastic fenders.Painted plastic driver's cab. (Polystyrene)Painted plastic parts for attachment to the driver's cab.Windows, mirrors, windshield wipers and other attachments.True-to-original interior fittings, functional fifth wheel coupling. Headlights, indicators, taillight units - without lighting fixtures.Switchable 3-speed gearbox (kit), cardan shaft, electric motor (7,2V), plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, etc., decoration set (stickers). Richly illustrated, comprehensive assembly instructions.Technical data:Length: 530mm, width: 187mm, height: 293mm.Weight: 3000g.

Volvo FH16 XL 750 Globetrotter 4x2 in 1:14 scale. Plug-in cab and removable at the top. Trade fair novelty 2024. A beauty under the surface. A beast under the hood - Volvo FH 16 XL 750 New 2024 at the Toy FairWith the Volvo FH 16 XL 750 4x2 Globetrotter, Tamiya is bringing a new 16-axle standard tractor unit after the FH2 timber transporter and the recovery vehicle.With 751 hp (552 kW), the prototype is a real powerhouse and ideal for any use.The model dispenses with a playful design and impresses with clear lines and striking design elements such as the mighty front.The original model can be found with up to 5 axles, which can be perfectly implemented in the model by using various tuning components.The scope of delivery is as follows:KitDetailed and illustrated assembly instructionsElectric motor 540 TR engine (35T)Gearbox components, 3-speed manual transmissionMetal differential on the rear axlesEasily removable driver's cab, screwed, not tiltableAdd-on parts for driver's cab (lamps, Antenna, mirror)very detailed interiorincluding driver figureRequired accessoriesMultifunction unit MFC-03 (item 8484)orDrive controller, e.g. SFR-1 (item 10974) or S22 (item 9182)Colors for painting the body components shown in TS-54 metallic blue, light glossyDrive battery 7,2VRemote control with at least 4 channelsSteering servo e.g. 645MG (item 7968)Shift servo, e.g. CS-3 (item 8851)Recommended accessoriesSound moduleLight moduleAs is easy to see, the model offers a variety of options for conversion.Please feel free to contact us, we will be happy to advise you and offer attractive complete packages to put together your dream truck.

Tamiya MERCEDES BENZ 1850L. Kit 1/14 2-axle European tractor with drive and box body. Complete kit for building a driving model. To complete the model as a driving model, you will also need:Paint(s)Drive batteryRC components (remote control, servos, etc.)The kit contains:Pre-drilled and threaded frame components.All parts for 1 driven axle with differential.1 non-driven steering axle.Leaf spring packages for all axles.Rims and tires.Fenders.Unpainted plastic driver's cab. (Polystyrene)Unpainted plastic parts for attachment to the driver's cab.Windows, mirrors, windshield wipers and other attachments.Original interior fittings.Plastic box body with rear doors.Headlights, indicators, tail light units - without lighting fixtures.Switchable 3-speed gearbox (kit), cardan shaft.Electric motor (7,2V).Plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, etc.Decorative set (stickers).Richly illustrated, comprehensive assembly instructions.Technical data:Wheelbase: 360mmLength: 500mmWidth: 183mmWeight: 2640gr.Matching lighting system (not included):Article 9229

Tamiya Scania R620 (56323) kit 1/14 Scania R620 6x4 Highline. Unpainted. Complete kit for building a driving model. To complete the model as a driving model, you will also need:Paint(s), drive battery, RC components (remote control, servos, etc.)The kit contains:Pre-drilled and threaded frame components.All parts for 2 driven axles with differential.1 non-driven steering axle.Leaf spring packages for all axles.Rims and tires, plastic fenders.Unpainted plastic driver's cab. (Polystyrene)Unpainted plastic parts for attaching to the driver's cab.Windows, mirrors, windshield wipers and other attachments.True-to-original interior fittings, functional fifth wheel coupling. Headlights, indicators, taillight units - without lighting fixtures.Switchable 3-speed gearbox (kit), cardan shaft, electric motor (7,2V), plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, etc., decoration set (stickers). Richly illustrated, comprehensive assembly instructions.Technical data:Length: 500mm, width 230mm.Weight: 3000g.

Tamiya Mercedes Benz Arocs 3363 ClassicSpace 6x4. 300056359 kit. Pre-painted light gun metal. Tamiya Mercedes Benz Arocs 3363 ClassicSpace 6x4. 300056359 kit. Light gun metal pre-painted. Cabin length: 141mm. NEW at the 2019 Toy Fair Complete kit for building a driving model. To fully complete the model, the following are also required:Drive battery, RC components (remote control, servos, etc.)The truck kit contains:Pre-drilled and threaded frame componentsAll parts for 2 driven axles with differential1 non-driven steering axleLeaf spring packages for all axles. Rims and tiresPainted plastic cab. Plastic fendersPainted plastic parts for attachment to the driver's cabWindows, mirrors, windshield wipers and other attachmentsTrue-to-original interiorFunctional fifth wheel couplingHeadlights, indicators, tail light units - without lighting fixtures. Sun visor, signal horns, switchable 3-speed gearbox (kit), cardan shaft. Electric motor (7,2V)Plastic parts for servo mounts, battery compartmentAll necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, stickers, etc.Richly illustrated, comprehensive assembly instructionsRecommended accessories:Remote control REFLEX-Stick Multi Pro 14 (item 9494).Multifunctional unit MFC-03 for lighting, sound, speed controller. Article 8484.Technical data:Scale: 1:14Length: 538mmArocs 3363, the workhorse as a truck modelThis truck with its extraordinary design and impressive performance data is now also available as an RC model.The Tamiya Arocs 3363 is one of the highlights of the 2019 toy fair in Nuremberg. The model, manufactured in 1:14 scale, has a high deadweight and can be coupled to both Tamiya and Carson trailers via its fifth wheel.A kit that is impressiveThis truck kit is equipped with proven Tamiya technology and has the best values ​​in terms of flexibility and stability thanks to the ladder frame or chassis made of aluminum. The radiator grille in excavator tooth look and the headlights protected by sturdy grilles indicate the hard work of the original on the construction site. Tamiya, the manufacturer already known for its Actros Gigaspace models, has succeeded in creating another high-quality and impressive RC model with the replica of the Mercedes-Benz Arocs 3363 6X4 M-Cab Classic Space. The body is made of high-quality ABS plastic, the interior is excellently reproduced and the driver's cabin can be folded forward just like the original. The coil spring damping and the leaf springs ensure realistic driving behavior.Accessories and extensionsIf the kit is additionally equipped with the multifunctional module MFC-03, the realistic light and sound functions of the Arocs can also be reproduced. To control the model, a remote control unit with at least 4 channels is required.