Actros

Tip:

1 Tamiya Mercedes Benz Actros 1851 GigaSpace 4x2. kit

1 Tamiya Mercedes Benz Actros 1851 GigaSpace 4x2. Kit. Unpainted. Complete package with drive battery, ball bearings, individual license plates and lighting set! Special set! Only while our stocks last! Special package consists of the following items: 7881 (Actros kit from Tamiya) 7446 (ball bearing set for 2-axle tractor) 8196 (battery pack 7,2V/4500mAh with Tamiya plug) 2732 (REFLEX license plate set of your choice) 8038 (1 pair of tail light boards 7,2V for Actros) 8040 (1 pair of headlight boards 7,2V for Actros) 8042 (sidelight set, LEDs for Actros) Only while our stocks last!

Ready to ship in 5 days, delivery time 1-4 days

Product number: 8401

575,00 € 648,96 € (11.4% saved)

Tamiya Mercedes Benz Actros 3363 Giga 6x4. Kit

1x Tamiya Mercedes Benz Actros 3363 GigaSpace 6x4. Kit. With PEARL-BLUE (TS-89) painted sprues for the body parts. (56354) Complete kit for building a driving model. To complete the model as a driving model, you will also need: Drive battery, RC components (remote control, servos, etc.) The kit contains: Ready-drilled and threaded frame components. All parts for 2 driven axles with differential. 1 non-driven steering axle. Leaf spring packages for all axles. Rims and tires. Painted plastic driver's cab. Plastic fenders. Painted plastic parts for attachment to the driver's cab. Windows, mirrors, windshield wipers and other attachments. True-to-original interior. Functional fifth wheel coupling. Headlights, indicators, taillight units - without lighting units. Sun visor, signal horns.Roof lamp bracket with 5 headlights (without bulbs).Front lamp bracket with 4 rectangular headlights.Switchable 3-speed gearbox (kit), cardan shaft. Electric motor (7,2V)Plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, stickers, etc.Richly illustrated, comprehensive assembly instructions.Technical data:Scale: 1:14Length:538mmWidth: 195mmHeight: 305mm

Available immediately, delivery time: 1-4 days

Product number: 10695

458,99 € 560,00 € (18.04% saved)

Tip:

Tamiya Mercedes Benz ACTROS 3363 Gigaspace 6x4, kit

1 Tamiya Mercedes Benz Actros 3363 GigaSpace 6x4. Kit. Unpainted. 300056348. Complete kit for building a driving model. To complete the model as a driving model, you will also need:Paint(s), drive battery, RC components (remote control, servos, etc.)The kit contains:Frame components with pre-drilled and threaded holes.All parts for 2 driven axles with differential.1 non-driven steering axle.Leaf spring packages for all axles. Rims and tires.Unpainted plastic driver's cab. Plastic fenders.Unpainted plastic parts for attaching to the driver's cab.Windows, mirrors, windshield wipers and other attachments.Original interior fittings.Functional fifth wheel coupling.Headlights, indicators, taillight units - without lighting fixtures. Sun visor, signal horns.Roof lamp bracket with 5 headlights (without bulbs).Front lamp bracket with 4 rectangular headlights.Switchable 3-speed gearbox (kit), cardan shaft. Electric motor (7,2V).Plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, stickers, etc.Richly illustrated, comprehensive assembly instructions.Recommended accessories:Remote control REFLEX-Stick Multi Pro 14 (item 9494).Multifunctional unit MFC-03 for lighting, sound, speed controller. Article 8484.Technical details:Detailed replica of the air pressure tank and battery boxDetailed replica of the fuel and AdBlue tanksDetailed replica of the catwalk with photo-etched partsExhaust replica with integrated storage compartmentChrome-plated compressed air hornsRoof lamp bracket (lighting can be retrofitted with LEDs 1x 9733 (2-pack) + 3x 9732 (1-pack)Lamp bracket bumper (lighting can be retrofitted with LEDs 2x 9733 (2-pack)Side marker lights (lighting can be retrofitted with LEDs (3mm))Aerodynamic and replica chrome package with bump barPrototypical 2-axle driveABS injection-molded bodyTiltable driver's cab (forwards)Original interiorRemovable fender half shellsAluminum ladder frame with plastic connectorsRear axle with Metal bevel gearsMetal bevel gear differential3-speed manual transmissionFifth wheel plate (suitable for all Tamiya and Carson trailers)Leaf spring packages with shock absorbers on the front and rear axlesAluminum front axleAluminum drive shaftsElectric motor type 540Dimensions: Length 538 mm, width 195 mm, height 305 mmScale 1:14Technical data:Length 538 mmWidth 195 mmHeight 305 mm

Available immediately, delivery time: 1-4 days

Product number: 9674

385,00 € 530,00 € (27.36% saved)

Tamiya Mercedes Benz ACTROS 1851 Gigaspace 4x2, black

1x Tamiya Mercedes Benz Actros 1851 GigaSpace 4x2. Kit. With BLACK painted sprues for the body parts. (56342) **DISCONTINUED ITEM! DISCONTINUED ITEM! Complete kit for building a driving model. To fully complete the model as a driving model, you will also need: Drive battery, RC components (remote control, servos, etc.) The kit contains: Frame components with pre-drilled and threaded holes. All parts for 1 driven axle with differential. 1 non-driven steering axle. Leaf spring packages for all axles. Rims and tires. Painted plastic driver's cab. Plastic fenders. Painted plastic parts for attaching to the driver's cab. Windows, mirrors, windshield wipers and other attachments. True-to-original interior. Functional fifth wheel coupling. Headlights, indicators, taillight units - without lighting units. Sun visor, signal horns.Switchable 3-speed gearbox (kit), cardan shaft. Electric motor (7,2V).Plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, stickers, etc.Comprehensive, richly illustrated assembly instructions.

End of life - article no longer available!

Product number: 9048

379,00 € 469,99 € (19.36% saved)

Details

Tamiya Mercedes Benz ACTROS 1851 Gigaspace 4x2, kit

1 Tamiya Mercedes Benz Actros 1851 GigaSpace 4x2. Kit. Unpainted. Available from stock! Complete kit for building a driving model. To complete the model as a driving model, you will also need: Paint(s), drive battery, RC components (remote control, servos, etc.) The kit contains: Frame components with pre-drilled and threaded holes. All parts for 1 driven axle with differential. 1 non-driven steering axle. Leaf spring packages for all axles. Rims and tires. Unpainted plastic driver's cab. Plastic fenders. Unpainted plastic parts for attaching to the driver's cab. Windows, mirrors, windshield wipers and other attachments. True-to-original interior fittings. Functional fifth wheel coupling. Headlights, indicators, taillight units - without lighting fixtures. Sun visor, signal horns. Switchable 3-speed gearbox (kit), cardan shaft. Electric motor (7,2V)Plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, stickers, etc.Richly illustrated, comprehensive assembly instructions.

Available immediately, delivery time: 1-4 days

Product number: 7881

349,00 € 465,00 € (24.95% saved)

EasyBus lighting system KLM 4 / 16 TAMIYA MB Actros 3363

EasyBus Lighting System KLM 4/16 for Tamiya Mercedes-Benz Actros 3363. The lighting system for the Tamiya Actros 3363 features the new KLM 4/16, ready-to-install lighting circuit boards, and an integrated infrared transmitter. The lighting circuit boards are simply inserted into the light chambers from the rear and are held in place by a press fit. The system is controlled by a KLM 4/16, which is compatible with standard forward/reverse speed controllers (with or without separate brake), cruise control speed controllers, and all sound modules. The lighting functions can be controlled either with our control pad or in numerous other ways; please refer to the online manual for details. This starter set includes a complete lighting system for the Tamiya Mercedes-Benz Actros 3363 and consists of two front lighting circuit boards with pre-wired LEDs for the side indicators, underride guard, and marker lights, as well as a KLM 4/16 light assistant. The lighting circuit boards are connected directly to the KLM 4/16 connected and can also be configured via our Kraftwerk ControlPanel. Brightness, flashing speeds, and basic functionality (e.g., whether the high beam should be switched on the output) can be set separately for each output. Further information can be found under Highlights & Details. KLM 4/16 (4 servo inputs, 16 switching outputs, 5 bus outputs) Ready-to-install lighting boards Plug & Play solution (connect and drive) Compatible with all sound modules Compatible with all speed controllers Compatible with Tamiya MFU Expandable with various lighting boards Expandable with infrared for trailer lighting Customizable to the smallest detail via PC No programming knowledge required PC software available for free download Technical Data Power supply: via receiver power supply (BEC of the speed controller) Max. current consumption 20mA per device and 20mA per LED Front LEDs (per side):

Available immediately, delivery time: 1-4 days

Product number: 11003

269,89 €

EasyBus lighting system KLM 4 / 16 TAMIYA MB Actros 1851

EasyBus Lighting System KLM 4/16 for Tamiya Mercedes-Benz Actros 1851. This lighting system for the Tamiya MB Actros 1851 features the new KLM 4/16 controller, ready-to-install lighting circuit boards, and an integrated infrared transmitter. The lighting circuit boards are simply inserted into the light chambers from the rear and are held securely in place by a press fit. The system is controlled by a KLM 4/16 controller, which is compatible with standard forward/reverse speed controllers (with or without separate brake), cruise control controllers, and all sound modules. The lighting functions can be controlled either with our control pad or in numerous other ways; please refer to the online manual for details. This starter set includes a complete lighting system for the Tamiya Actros 1851 and consists of two front lighting circuit boards with pre-wired LEDs for the side indicators, underride guard, and marker lights, as well as a KLM 4/16 light assistant. The lighting circuit boards are connected directly to the KLM 4/16 controller. 4/16 connected and can also be configured via our Kraftwerk ControlPanel. Brightness, flashing speeds, and basic functionality (e.g., whether the high beam should be switched on the output) can be set separately for each output. Further information can be found under Highlights & Details KLM 4/16 (4 servo inputs, 16 switching outputs, 5 bus outputs) Ready-to-install lighting boards Plug & Play solution (connect and drive) Compatible with all sound modules Compatible with all speed controllers Compatible with Tamiya MFU Expandable with various lighting boards Expandable with infrared for trailer lighting Customizable down to the smallest detail via PC to match the prototype No programming knowledge required PC software available for free download Technical Data Power supply: via receiver power supply (BEC of the speed controller) Max. Power consumption 20mA per device and 20mA per LED. Front LEDs (per side): 1 x 3mm yellow, 1 x 3mm white, 2 x 5mm white, 2 x 3mm white (wired), 1 x 3mm yellow (wired). Ultra-bright high-performance LEDs. Additional outputs at the front: 3, each with a 180 Ohm resistor. Rear LEDs (per side): 1 x 5mm red, 1 x 5mm yellow, 1 x 3mm white, 1 x 3mm red. Ultra-bright high-performance LEDs. Additional outputs at the rear: 1, each with a 180 Ohm resistor. Scope of delivery: Light Assistant KLM 4/16, four ready-to-install lighting boards (2x front, 2x rear).

Available immediately, delivery time: 1-4 days

Product number: 11002

234,89 €

1 Roof lamp bracket-SET f. ACTROS (Tamiya) MS plated with

1 roof lamp bracket set for ACTROS (Tamiya) MS, nickel-plated with 4 upright lamps, chrome-plated - with angel eyes effect blue/white. Suitable for 7,2-12V! 1 piece. Bracket diameter: 5mm. Total width 131mm. Depth approx. 100mm. Distance to roof surface approx. 4mm. Fastened to the vehicle roof using 4 M2 stud bolts. Available from stock! The SMD LED boards are equipped with series resistors for operation at 7,2-12 volts. Longer wire = positive pole!Scope of delivery:1 roof lamp bracket on 5mm round material, chrome-plated, for ACTROS (Tamiya)4 chrome-plated headlight housings, suitable for the 5mm bracket.4 circuit boards with blue and white SMD LEDs with series resistors.2 Zener diodes 5,1V (only required when operating on 12V!).4 chrome-plated reflectors, suitable for the headlight housings.Screws for fastening to the lamp bracket.4 clear light discs.4 blue-tinted light discs.Instructions.Blue angel eye effect (parking light) and white high beam light.Lamp diameter approx. 16mmLight disc diameter approx. 14mmTotal height with holder approx. 25mmSuitable for bracket diameters of 5mmAvailable from stock!

Ready to ship in 5 days, delivery time 1-4 days

Product number: 8499

157,23 €

1 Roof lamp bracket-SET f. ACTROS (Tamiya) MS plated with

1 roof lamp bracket set for ACTROS (Tamiya) MS nickel-plated with 4 upright lamps, chrome-plated - with Angel Eyes effect white/white. Suitable for 7,2-12V! 1 piece. Bracket diameter: 5mm. Total width 131mmDepth approx. 100mmDistance to roof surface approx. 4mmThe bracket is attached to the vehicle roof using 4 M2 stud bolts.Available from stock!The SMD LED boards are equipped with series resistors for operation at 7,2-12 volts. Longer wire = positive pole!Scope of delivery:1 roof lamp bracket on 5mm round material, chrome-plated, for ACTROS (Tamiya)4 chrome-plated headlight housings, suitable for the 5mm bracket (207081). 4 circuit boards with white SMD LEDs with series resistors.2 Zener diodes 5,1V (only required when operating on 12V!).4 chrome-plated reflectors, matching the headlight housings.Screws for fastening to the lamp bracket.4 clear light discs.4 blue-tinted light discs.Instructions.White angel eye effect (parking light) and white high beam light.Lamp diameter approx. 16mmLight disc diameter approx. 14mmTotal height with holder approx. 25mmSuitable for bracket diameters of 5mmAvailable from stock!

Ready to ship in 5 days, delivery time 1-4 days

Product number: 8500

152,45 €

1 complete set lighting boards for Actros from Tamiya

1 COMPLETE SET of lighting boards for ACTROS from Tamiya. Ready-to-connect LED boards for 7,2V! With series resistors and color-coded connecting wires. Scope of delivery: (for 7,2V)Headlight lighting boards (1x left/1x right) to match the ACTROS from Tamiya. With color-coded connecting wires (approx. 50cm long). Light functions:IndicatorSide marker light with flashing functionParking lightDriving lightHigh beamFog lightTail light lighting boards (1x left, 1x right) with approx. 50cm cable.-Indicator-Tail light-Brake light-Reverse light2 roof marker lights (white)2 side marker lights, orange, for side panelingInstructions

Ready to ship in 5 days, delivery time 1-4 days

Product number: 8062

107,70 €

1 complete set lighting boards for Actros from Tamiya

1 COMPLETE SET of lighting boards for ACTROS from Tamiya. Ready-to-connect LED boards for 12V! With series resistors and color-coded connecting wires. Scope of delivery: (for 12V)Headlight lighting boards (1x left/1x right) to match the ACTROS from Tamiya. With color-coded connecting wires (approx. 50cm long). Light functions:IndicatorSide marker light with flashing functionParking lightDriving lightHigh beamFog lightTail light lighting boards (1x left, 1x right) with approx. 50cm cable.-Indicator-Tail light-Brake light-Reverse light2 roof marker lights (white)2 side marker lights, orange, for side panelingInstructions

Ready to ship in 5 days, delivery time 1-4 days

Product number: 8064

107,70 €

1 Roof lamp bracket for Actros from Tamiya, MS nickel plated

1 roof lamp bracket for ACTROS from Tamiya, nickel-plated metal with 4 upright lamps, chrome-plated. With blue-tinted and clear lens covers. 500907134 (1 piece). Bracket diameter: 5mm. Total width: 131mm. Depth: approx. 100mm. Distance to roof surface: approx. 4mm. Attached to the vehicle roof with 4 M2 studs. Lamp diameter: approx. 16mm. Lens diameter: approx. 14mm. Total height with bracket: approx. 25mm. Suitable for bracket diameters of 5mm. Available from stock!

Ready to ship in 5 days, delivery time 1-4 days

Product number: 8346

85,99 € 96,99 € (11.34% saved)

Actros headlamp circuit boards (1 pair). Servonaut

Actros headlight circuit boards (1 pair). The new circuit boards from Servonaut automatically adjust to the battery voltage and are therefore suitable for 7,2-12V. For Tamiya Actros. Left and right. Servonaut MB Actros headlight circuit board for 7.2 to 12 volts, no conversion necessary when switching to 12V, no external resistors required. Light functions: turn signals, parking lights, low beam, high beam, fog/cornering lights, combined parking light and turn signal, daytime running light prepared (drilling/milling on the model is required), good optics, individually optimized light guides for each LED, different light cones for low and high beam, as in the original, high-quality 40cm long cables with PTFE insulation, suitable for Tamiya Actros and Servonaut M20+/M24/ML4/LA10/K40, universally suitable for all lighting systems with a common positive terminal and at least 100mA switching capacity. Scope of delivery: 2 circuit boards (1x left, 1x right), light guides

Available immediately, delivery time: 1-4 days

Product number: 10463

67,40 €

Daytime running lights for Actros from Tamiya 2- and 3-axle, 7,2/12

Daytime running lights for Actros from Tamiya 2- and 3-axle, 7,2/12V. Incl. LEDs and series resistors. Daytime running lights for MB Actros 2/3-axle from TamiyaInput voltage 7,2 - 12V/DCNot compatible with Tamyia MFC-0x

Available immediately, delivery time: 1-4 days

Product number: 12829

62,95 € 65,99 € (4.61% saved)

1:14 Cab lock V2A with magnet for Tamiya Actros

1:14 V2A cab lock with magnet for Tamiya Actros. ScaleClub Scale cab lock made of stainless steel with a magnetic closure. Suitable for Tamiya Actros cabs. The lock is additionally secured with a spring clip. Dimensions: Top width: 95 mm, Bottom width: 73 mm, Bottom bore: 53 mm, Top bore: 25 mm

Available immediately, delivery time: 1-4 days

Product number: 13105

54,89 € 59,95 € (8.44% saved)

MB Actros / Arocs rear light board. LH6MB of Servonaut

MB Actros/Arocs rear light board. The new LH6 boards from Servonaut automatically adapt to the battery voltage and are therefore suitable for 7,2-12V. Does not fit Arocs 3348. Item 11047 fits here. 7 or 8 LEDs per side and a combination of light guides, color and diffuser discs, which are included in the scope of delivery, ensure even and complete illumination of the chambers in the rear lights. The LH6 boards can be combined with all common lighting systems that switch minus, i.e. work with a common positive pole. - for 7.2 to 12 volts, no conversion necessary when changing to 12V - 5 light functions: indicator, parking light (dimmed), brake light, rear fog and reversing light - good optics thanks to 2x7 LEDs and included light guides, diffuser and color discs - high-quality 100cm long cable with PTFE insulation - suitable for Actros/Arocs and Servonaut M20+/M24/ML4/LA10/K40 - universally suitable for all lighting systems with a common positive pole - Scope of delivery: 2 boards (1x left, 1x right), light guide, diffuser - Illustration shows assembled rear light with original Tamiya parts (not included)

Available immediately, delivery time: 1-4 days

Product number: 10305

41,70 €

1x SideBar set for Actros from Tamiya. Material: ABS

1x SideBar set for ACTROS from Tamiya. Material: ABS 3D printing. Light sanding is still necessary. 1x pair of SideBars, 12x yellow LEDs (sides), resistors. All LEDs 1,8mm. Resistors are included. The 1,8mm LEDs are glued into the SideBars from behind and then wired to the series resistors. The SideBar is glued (or screwed) to the side underrun protection from below. The length of the SideBars corresponds to the length of the side paneling of the 2-axle ACTROS tractor. Total length 169mm.

Available immediately, delivery time: 1-4 days

Product number: 8660

29,95 €

1x Lobar set for ACTROS Tamiya Material: ABS 3D Print

1x LoBar set for ACTROS from Tamiya Material: ABS 3D printing. Light sanding is still necessary. 1x LoBar, 4x yellow LEDs (sides), 7x white LEDs (front). All LEDs 1,8mm. Resistors are included. The 1,8mm LEDs are glued into the LoBar from behind and then wired to the series resistors. LoBar can be glued (or screwed) to the front apron from below.

Available immediately, delivery time: 1-4 days

Product number: 8330

29,95 €

1x BakBar for the cab rear wall for MANs and Actros

1x BakBar for the rear panel of the driver's cab for MANs and Actros from Tamiya, with LEDs. 3D printing, ABS, white. Dimensions: 160x15x7mm. Scope of delivery: 1x BakBar, white, 3D printing, ABS, 160mm long, 5mm diameter. 5x LEDs 1,8mm, red. 2x resistors, for 7,2-12V.

Available immediately, delivery time: 1-4 days

Product number: 9763

24,95 €

1 Kugellagersatz for Tamiya-2-axle trucks as Scania470,

1 ball bearing set for Tamiya 2-axle trucks, such as Scania470, MAN TGX or Actros. 24 pieces. 500904027. Contains 24 ball bearings: 19x 11x5x4mm. (888) 4x 12x6x4mm. (890) 1x 8x5x3mm. (891) Suitable for the Tamiya tractors: MAN 18.540, MB1838, MB1850L, Scania R470, Volvo, ACTROS.

Available immediately, delivery time: 1-4 days

Product number: 7446

20,99 € 24,49 € (14.29% saved)

1x VisorBar for Actros by Tamiya

1x VisorBar for Actros from Tamiya. Fits over the sun visor of the Actros (from Tamiya). 3D print, ABS, white. Scope of delivery:1x VisorBar, white, 3D print, ABS, 120mm long, 5mm diameter.5x LEDs 1,8mm, white.2x resistor, for 7,2-12V.

Available immediately, delivery time: 1-4 days

Product number: 9761

17,95 €

Studs conversion kit for Tamiya 1-front axle. Significant

Wheel bolt conversion kit for 1 Tamiya front axle. Significant reduction in play compared to the kit bolts. Steel. (500907091).

Available immediately, delivery time: 1-4 days

Product number: 5620

15,99 € 18,29 € (12.58% saved)

MiniBar for Tamiya Actros, 3 white 1.8mm LEDs

MiniBar for Tamiya Actros, 3 white 1.8mm LEDs incl. Series resistors. 3D printing, ABS white Dimensions: 87x5x22mm

Available immediately, delivery time: 1-4 days

Product number: 10739

14,95 €

1x Mini-Bar for ACTROS (Tamiya), black Material: ABS 3D-Dr

1x Mini-Bar for ACTROS (Tamiya), black Material: ABS 3D printing. Light sanding is still necessary. 1x MiniBar, 3x LEDs white, bright, series resistor 4,7K. All LEDs 1,8mm. Resistor is included. The 1,8mm LEDs are glued into the MiniBar from behind and then wired to the series resistor. MiniBar fits into the existing holes in the Actros front bumper. Dimensions: 89x5x23mm. Matching additional headlights item 9142!

Available immediately, delivery time: 1-4 days

Product number: 9141

14,95 €

1x set of interior door panels for ACTROS from Tamiya

1x set of interior door panels for ACTROS from Tamiya. Material: PU. 1 door panel left, 1 door panel right.

Available immediately, delivery time: 1-4 days

Product number: 8325

14,74 € 14,95 € (1.4% saved)

Tie rod, bent, steel. Improves steering behavior

1 tie rod, bent, steel. Improves the steering behavior. Suitable for all Tamiya Euro tractors. (500013516). Overall length 105mm with each M3 thread on both ends.

Available immediately, delivery time: 1-4 days

Product number: 6612

7,49 € 8,49 € (11.78% saved)

Filter products