Arocs

Tamiya Mercedes Benz Arocs 3348 rear tipper kit 6x4. Vo

Tamiya Mercedes Benz Arocs 3348 rear tipper kit 6x4. Pre-painted. The tilting mechanism is available separately. Pre-painted red/silver. The trough consists of a sturdy ABS part and has a movable and automatically unlocking tailgate. The payload is max. 10Kg and the trough can be tilted wirelessly using the optionally available ACU-01 spindle drive unit. (Article 10832). The trough is pre-painted in silver. The unmistakable design of the new Arocs is as extraordinary as the truck as a whole. The look, which was specially developed for construction vehicles, includes a radiator grille with the so-called excavator tooth look, which is intended to convey the message: “Bite through and grab hold”. In keeping with the robust appearance, special protective grilles for the lighting system are attached to the bumper. With the 576 mm long and around 3,5 kg heavy kit model, impressive teams can be put together. The proven and robust TAMIYA truck technology can be found under the forward-tilting driver's cab. A new Mighty-Tuned 35T electric motor delivers its power to the two rear axles via a switchable 3-speed transmission. A detailed aluminum ladder frame gives the model the necessary stability and flexibility. A special additional frame was installed for the trough, which makes the model particularly stable. The driver's cab parts are pre-painted red. A drawbar (e.g. Article 7876) and can be used to tow trailers. With the optionally available multifunctional unit, almost all sound and light functions of the original can be simulated deceptively realistically.Required accessories:- Min. 4 channel remote control e.g. Reflex 14 LCD 500501004 (14-channel LCD display)- 7.2V NiMH battery pack, charger- steering servo + servo for manual transmission- speed controller or TAMIYA multifunction unit MFC-03 item 8484 for the driving, light and sound functions- TAMIYA ACU-01 spindle drive unit (item 10832) for driving the trough. The ACU-01 is plugged into the multifunctional unit.Scope of delivery:Kit model with detailed instructions, electric motor, 3-speed manual transmission Technical details:- Kit model in 1:14 scale- Dimensions: length 576 mm, width 190 mm, height 267 mm- Scale 1:14- True-to-scale ABS body replica of the Arocs 3348, including handrails, steps, side mirrors and much more- One-piece loading tray for max.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 12244

€ 610,01 * € 685,00 * (10.95% saved)

Subscriptions

Tamiya Mercedes Benz Arocs 4151 Rear Tipper Kit 8x4

Tamiya Mercedes Benz Arocs 4151 rear tipper kit 8x4. 300056366 Unpainted. The tipping mechanism is available separately. Tamiya novelty 2021The TAMIYA truck for tough construction site use!The Mercedes Benz Acros 4151 8x4 is a real heavyweight on the construction site. TAMIYA has modified the tried and tested chassis for this truck:The truck has 4 axles like the original. The two rear axles are driven by a powerful 540 electric motor. The two front axles are articulated via a servo (available separately). The steering angle of the two axles is different so that a true-to-original driving behavior is achieved.The frame has a subframe to accommodate the newly designed tipping trough. The trough has been reinforced with a metal subframe and can be controlled via the optional TAMIYA ACU-01 unit (56545).The unmistakable design of the new Arocs is as unusual as the truck as a whole. For example, the look specially developed for construction vehicles includes a radiator grille in the so-called excavator tooth look, which is intended to convey the message: "Bite through and grab hold". In keeping with the robust appearance, special protective grilles for the lighting system are attached to the bumper.Technical dataImpressive trailers can be put together with the 667 mm long and around 4 kg heavy kit model. The tried and tested and robust TAMIYA truck technology can be found under the driver's cab, which can be tilted forwards. A new Mighty-Tuned 35T electric motor delivers its power to the two rear axles via a switchable 3-speed gearbox. A detailed aluminum ladder frame gives the model the necessary stability and flexibility. A drawbar (e.g. Carson 500907182) can be attached to the rear part of the frame and used to pull trailers. With the optionally available multifunctional unit, almost all of the sound and light functions of the original can be simulated in a deceptively realistic way. Required accessories: At least 4-channel remote control Steering servo Switching servo Colors Battery 7,2V Speed controller Scope of delivery: Kit model Detailed instructions Electric motor 3-speed manual transmission Item 10832 is available as a tilt drive (not included). The photos of the red-painted AROCS show the result of our painting service. The kit is delivered unpainted. The individual paint job can be purchased optionally for a fee. Are you looking for a stable and functional storage or transport box? Take a look at the matching items 11814 or 12047.

Available immediately, delivery time: 1-4 days

Product number: 12140

€ 555,00 * € 770,00 * (27.92% saved)

Subscriptions

configure now

Tamiya Mercedes Benz Arocs 3348 Rear Tipper Kit 6x4

Tamiya Mercedes Benz Arocs 3348 rear tipper kit 6x4. Unpainted. The tipping mechanism is available separately. The trough consists of a sturdy ABS part and has a movable and automatically unlocking tailgate. The maximum payload is 10 kg and the trough can be tipped wirelessly using the optionally available ACU-01 spindle drive unit. (Item 10832) The unmistakable design of the new Arocs is as unusual as the truck as a whole. For example, the look specially developed for construction vehicles includes a radiator grille in the so-called excavator tooth look, which is intended to convey the message: -Bite through and grab hold-. In keeping with the robust appearance, special protective grilles for the lighting system are attached to the bumper. With the 576 mm long and around 3,5 kg heavy kit model, impressive trailers can be put together. The tried and tested and robust TAMIYA truck technology can be found under the driver's cab, which can be tilted forwards. A new Mighty-Tuned 35T electric motor delivers its power to the two rear axles via a switchable 3-speed gearbox. A detailed aluminum ladder frame gives the model the necessary stability and flexibility. A special additional frame was installed for the trough, which makes the model particularly stable. A tow bar (e.g. item 7876) can be attached to the rear part of the frame and used to pull trailers. With the optionally available multifunctional unit, almost all of the sound and light functions of the original can be simulated in a deceptively realistic way. Required accessories: - Min. 4 channel remote control e.g. Reflex 14 LCD 500501004 (14-channel LCD display) - 7.2V NiMH battery pack, charger - TAMIYA TS paint for painting - steering servo + servo for manual transmission - speed controller or TAMIYA multifunction unit MFC-03 article 8484 for the driving, light and sound functions - TAMIYA ACU-01 spindle drive unit (article 10832) for driving the trough. The ACU-01 is plugged into the multifunctional unit.Scope of delivery:Kit model with detailed instructions, electric motor, 3-speed manual transmission Technical details:- Kit model in 1:14 scale- Dimensions: length 576 mm, width 190 mm, height 267 mm- Scale 1:14- True-to-scale ABS body replica of the Arocs 3348, including handrails, steps, side mirrors and much more- One-piece loading tray for max. 10 kg payload- TAMIYA 3-axle chassis with reinforced frame- Tilting spindle unit available separately under item: 10832- Includes TR mighty-tuned motor for perfect power development on the two driven rear axles- New rear tires, bumper and mudguards- 3-speed manual transmission can be controlled via optional 4-channel remote control- Leaf springs on the axles and rear shock absorbers with coil springs- Recommended accessories: MFC-03 multifunctional unit (8484) for the driving, light and sound functions ACU-01 spindle drive unit (10832) for the tilt function

Available immediately, delivery time: 1-4 days

Product number: 10829

€ 509,00 * € 640,00 * (20.47% saved)

Subscriptions

Tip

Tamiya Mercedes-Benz Arocs 3363 6 ClassicSpace 4x56352

Tamiya Mercedes Benz Arocs 3363 ClassicSpace 6x4. 300056352 kit. Unpainted. Tamiya Mercedes Benz Arocs 3363 ClassicSpace 6x4. 300056352 kit. Unpainted. Cabin length: 141mm. NEW Toy Fair 2017 Complete kit for building a driving model. To fully complete the model as a driving model, the following are also required:Paint(s), drive battery, RC components (remote control, servos, etc.)The truck kit contains:Pre-drilled and threaded frame componentsAll parts for 2 driven axles with differential1 non-driven steering axleLeaf spring packages for all axles. Rims and tiresUnpainted plastic cab. Plastic fendersUnpainted plastic parts for attachment to the driver's cabWindows, mirrors, windshield wipers and other attachmentsTrue-to-original interior fittingsFunctional fifth wheel couplingHeadlights, indicators, tail light units - without lighting fixtures. Sun visor, signal horns, switchable 3-speed gearbox (kit), cardan shaft. Electric motor (7,2V)Plastic parts for servo mounts, battery compartmentAll necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, stickers, etc.Richly illustrated, comprehensive assembly instructionsRecommended accessories:Remote control REFLEX-Stick Multi Pro 14 (item 9494).Multifunctional unit MFC-03 for lighting, sound, speed controller. Article 8484.Technical data:Scale: 1:14Length: 538mmArocs 3363, the workhorse as a truck modelThis truck with its extraordinary design and impressive performance data is now also available as an RC model.The Tamiya Arocs 3363 is the highlight of the 2017 toy fair in Nuremberg. The model, manufactured in 1:14 scale, has a high deadweight and can be coupled to both Tamiya and Carson trailers via its fifth wheel.A kit that is impressiveThis truck kit is equipped with proven Tamiya technology and has the best values in terms of flexibility and stability thanks to the ladder frame or chassis made of aluminum. The radiator grille in excavator tooth look and the headlights protected by sturdy grilles indicate the hard work of the original on the construction site. Tamiya, the manufacturer already known for its Actros Gigaspace models, has succeeded in creating another high-quality and impressive RC model with the replica of the Mercedes-Benz Arocs 3363 6X4 M-Cab Classic Space. The body is made of high-quality ABS plastic, the interior is excellently reproduced and the driver's cabin can be folded forward just like the original. The coil spring damping and the leaf springs ensure realistic driving behavior.Accessories and extensionsIf the kit is additionally equipped with the multifunctional module MFC-03, the realistic light and sound functions of the Arocs can also be reproduced. To control the model, a remote control unit with at least 4 channels is required. A 7,2V drive battery and a steering servo are also required for driving.Are you looking for a stable and functional storage or transport box?

Available immediately, delivery time: 1-4 days

Product number: 10318

€ 389,00 * € 465,00 * (16.34% saved)

Subscriptions

Tamiya Mercedes Benz Arocs 3363 Hell-Gun Metallic 56359

Tamiya Mercedes Benz Arocs 3363 ClassicSpace 6x4. 300056359 kit. Pre-painted light gun metal. Tamiya Mercedes Benz Arocs 3363 ClassicSpace 6x4. 300056359 kit. Light gun metal pre-painted. Cabin length: 141mm. NEW at the 2019 Toy Fair Complete kit for building a driving model. To fully complete the model, the following are also required:Drive battery, RC components (remote control, servos, etc.)The truck kit contains:Pre-drilled and threaded frame componentsAll parts for 2 driven axles with differential1 non-driven steering axleLeaf spring packages for all axles. Rims and tiresPainted plastic cab. Plastic fendersPainted plastic parts for attachment to the driver's cabWindows, mirrors, windshield wipers and other attachmentsTrue-to-original interiorFunctional fifth wheel couplingHeadlights, indicators, tail light units - without lighting fixtures. Sun visor, signal horns, switchable 3-speed gearbox (kit), cardan shaft. Electric motor (7,2V)Plastic parts for servo mounts, battery compartmentAll necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, stickers, etc.Richly illustrated, comprehensive assembly instructionsRecommended accessories:Remote control REFLEX-Stick Multi Pro 14 (item 9494).Multifunctional unit MFC-03 for lighting, sound, speed controller. Article 8484.Technical data:Scale: 1:14Length: 538mmArocs 3363, the workhorse as a truck modelThis truck with its extraordinary design and impressive performance data is now also available as an RC model.The Tamiya Arocs 3363 is one of the highlights of the 2019 toy fair in Nuremberg. The model, manufactured in 1:14 scale, has a high deadweight and can be coupled to both Tamiya and Carson trailers via its fifth wheel.A kit that is impressiveThis truck kit is equipped with proven Tamiya technology and has the best values in terms of flexibility and stability thanks to the ladder frame or chassis made of aluminum. The radiator grille in excavator tooth look and the headlights protected by sturdy grilles indicate the hard work of the original on the construction site. Tamiya, the manufacturer already known for its Actros Gigaspace models, has succeeded in creating another high-quality and impressive RC model with the replica of the Mercedes-Benz Arocs 3363 6X4 M-Cab Classic Space. The body is made of high-quality ABS plastic, the interior is excellently reproduced and the driver's cabin can be folded forward just like the original. The coil spring damping and the leaf springs ensure realistic driving behavior.Accessories and extensionsIf the kit is additionally equipped with the multifunctional module MFC-03, the realistic light and sound functions of the Arocs can also be reproduced. To control the model, a remote control unit with at least 4 channels is required.

Available immediately, delivery time: 1-4 days

Product number: 11353

€ 350,00 * € 485,00 * (27.84% saved)

Subscriptions

Tilting spindle drive SPIN4151 1:14 tilting unit for Tamiya Aroc

Tilt spindle drive SPIN4151 1:14 Tilt unit for Tamiya Arocs 4151 rear tipper. Aluminum parts, screwed Assembly pre-assembled and wired, black powder-coated. MF8 recommended Tilt unit for Tamiya Arocs 4151 rear tipperAluminum parts, screwedTrapezoid spindle, rear mount with ball bearing7,2V to 12V motor with gearLimit switch (up to 3A) wired for both end positions we recommend the mini speed controller MF8 for operationAssembly pre-assembled and wired, black powder-coatedDimensions approx. 62 x 380mmfor frame width 63mmParts black powder-coatedTipping speed at 7,2V: 26 secondsTipping speed at 12V: 16 seconds

Available immediately, delivery time: 1-4 days

Product number: 12240

€ 318,99 *

Subscriptions

Tamiya rear tipper control / drive unit

Rear tipper control/drive unit. Tamiya. For the AROCS3348 rear tipper and the AROCS4151 rear tipper. ACU-01. Scope of delivery: lifting mechanism, gear motor, control electronics, shut-off device, instructions. Drive set for MB Arocs rear tipper (10829).

Available immediately, delivery time: 1-4 days

Product number: 10832

€ 299,00 * € 350,00 * (14.57% saved)

Subscriptions

Servonaut tilting unit for Tamiya Arocs 3348 rear tipper

Tilt spindle drive SPIN3348 1:14 Tilt unit for Tamiya Arocs 3348 rear tipper. Aluminum parts, screwed Assembly pre-assembled and wired, black powder-coated. MF8 recommended Tilt unit for Tamiya Arocs 3348 rear tipperAluminum parts, screwedTrapezoid spindle, rear mount with ball bearing7,2V to 12V motor with gearLimit switch (up to 3A) wired for both end positions we recommend the mini speed controller MF8 for operationAssembly pre-assembled and wired, black powder-coatedDimensions approx. 62 x 300mmfor frame width 63mmParts black powder-coatedTipping speed at 7,2V: 26 secondsTipping speed at 12V: 16 seconds

Available immediately, delivery time: 1-4 days

Product number: 11212

€ 298,00 *

Subscriptions

EasyBus lighting system KLM 4 / 16 for Tamiya Arocs 3348

EasyBus lighting system KLM 4/16 for Tamiya Mercedes-Benz Arocs 3348 The lighting system for the TAMIYA Arocs 3348 with the new KLM 4/16, ready-to-install lighting boards and integrated infrared transmitter.The lighting boards are simply inserted into the light chambers from behind and are held in place by a press fit.The system is controlled by a KLM 4/16, which is compatible with normal forward-reverse speed controllers (with or without separate brake), cruise control controllers and all sound modules.The lighting functions can be controlled either with our control pad or in numerous other ways, for details please refer to the online manual.This starter set includes a complete lighting system for the Mercedes-Benz Arocs 3348 from TAMIYA and consists of two front lighting boards with wired LEDs for the side indicators, underrun protection and marker lights, as well as a light assistant KLM 4/16.br>The Lighting boards are connected directly to the KLM 4/16 and can also be configured via this with our Kraftwerk ControlPanel. Brightness, flashing speeds, but also the basic functionality (e.g. should the high beam be switched on at the output) can be set separately for each output. Information about this can be foundHighlights & DetailsKLM 4/16 (4 servo inputs, 16 switching outputs, 5 bus outputs) Ready-to-install lighting boardsPlug & Play solution (connect and drive)Compatible with all sound modulesCompatible with all speed controllersCompatible with Tamiya MFUCan be expanded with a wide variety of lighting boardsCan be expanded with infrared for trailer lightingCan be adapted to the model down to the smallest detail using a PCNo programming knowledge requiredPC software can be downloaded free of chargeTechnical specificationsPower supply:via receiver power supply (BEC of the speed controller)Max. Power consumption 20mA per device and 20mA per LEDLEDs at the front (per side):yellow: 1x 3mmwhite: 2x 3mm, 1x 5mmyellow wired: 2x 3mmwhite wired: 1x 3mmUltra-bright high-performance LEDsAdditional outputs at the front 3 with 180 Ohm resistance eachLEDs at the rear (per side):red: 1x 3mm, 1x 5mmyellow: 1x 5mmwhite: 1x 3mmUltra-bright high-performance LEDsAdditional outputs at the rear 2 each with 180 Ohm resistanceScope of deliveryLight assistant KLM 4/16four ready-to-install lighting boards (2x front, 2x rear)

Available immediately, delivery time: 1-4 days

Product number: 11264

€ 219,00 * € 224,90 * (2.62% saved)

Subscriptions

Arocs cab, fully licensed. Unpainted

Arocs driver's cab, fully licensed. Unpainted kit suitable for 1:14 models. Experience the authentic driving experience with the fully licensed Mercedes-Benz cab hood! This 1:14 scale kit comes with the iconic Mercedes-Benz logo and has numerous finely crafted details that replicate the Arocs driver's cab. In addition, the cab hood is equipped with headlight holders and side mirrors to further enhance the realistic look. Although the cabin is supplied as a kit and unpainted, it still offers numerous options for customization. Suitable for 1:14 models, the Mercedes-Benz cab hood is a must-have for all model building enthusiasts and fans of Mercedes-Benz vehicles. Experience the beauty and detail of this product as you integrate it into your own collection! It is easy to assemble and can be easily installed on most Tamiya truck chassis or other compatible models.

Available immediately, delivery time: 1-4 days

Product number: 12836

€ 199,90 *

Subscriptions

EasyBus Lighting System KLM 4 / 16 TAMIYA MB Arocs 3363

EasyBus lighting system KLM 4/16 for Tamiya Mercedes-Benz Arocs 3363. The lighting system for the TAMIYA Arocs 3363 with the new KLM 4/16, ready-to-install lighting boards and integrated infrared transmitter.The lighting boards are simply inserted into the light chambers from behind and are held in place by a press fit.The system is controlled by a KLM 4/16, which is compatible with normal forward-reverse speed controllers (with or without separate brake), cruise control controllers and all sound modules.The lighting functions can be controlled either with our control pad or in numerous other ways, for details please refer to the online manual.This starter set includes a complete lighting system for the Mercedes-Benz Arocs 3363 from TAMIYA and consists of two front lighting boards with wired LEDs for the side indicators, underrun protection and marker lights, as well as a light assistant KLM 4/16.br>The Lighting boards are connected directly to the KLM 4/16 and can also be configured via this with our Kraftwerk ControlPanel. Brightness, flashing speeds, but also the basic functionality (e.g. should the high beam be switched on at the output) can be set separately for each output. Information about this can be foundHighlights & DetailsKLM 4/16 (4 servo inputs, 16 switching outputs, 5 bus outputs) Ready-to-install lighting boardsPlug & Play solution (connect and drive)Compatible with all sound modulesCompatible with all speed controllersCompatible with Tamiya MFUCan be expanded with a wide variety of lighting boardsCan be expanded with infrared for trailer lightingCan be adapted to the model down to the smallest detail using a PCNo programming knowledge requiredPC software can be downloaded free of chargeTechnical specificationsPower supply:via receiver power supply (BEC of the speed controller)Max. Power consumption 20mA per device and 20mA per LEDLEDs at the front (per side):yellow: 1x 3mmwhite: 2x 3mm, 1x 5mmyellow wired: 2x 3mmwhite wired: 1x 3mmUltra-bright high-performance LEDsAdditional outputs at the front 3 with 180 Ohm resistance eachLEDs at the rear (per side):red: 1x 3mm, 1x 5mmyellow: 1x 5mmwhite: 1x 3mmUltra-bright high-performance LEDsAdditional outputs at the rear 2 each with 180 Ohm resistanceScope of deliveryLight assistant KLM 4/16four ready-to-install lighting boards (2x front, 2x rear)

Available immediately, delivery time: 1-4 days

Product number: 11004

€ 199,00 * € 229,90 * (13.44% saved)

Subscriptions

Beacon set for MB Arocs by Tamiya. Specially on

Rotating beacon set for MB Arocs from Tamiya. Specially designed for the driver's cab of the Tamiya Mercedes-Benz Arocs. Technical details: Dimensions: height 22 mm, aluminum base diameter 17 mm, glass diameter 11 mm. Cable length approx. 350 mm (3-pin), operating voltage 4,5 - 6,0 V/DC= (receiver current), Uni plug system. Officially licensed by HELLA Set of 2 13 selectable programs (6 rotating / 7 strobe flash functions) Original flash / rotation speeds Integrated memory function for saving 2 programs (flash/rotating beacon) Control via switching channel (3-position on/off/on) Matching roof lamp bracket for Arocs driver's cab: Article 10897

Ready to ship in 5 days, delivery time 1-4 days

Product number: 10896

€ 109,00 * € 120,00 * (9.17% saved)

Subscriptions

Illuminated Mercedes-Benz star (blue) for the Actros of

Illuminated Mercedes-Benz star (blue) for the Actros from Tamiya. Suitable for 7,2 and 12V. Installation diameter: 30mm. Ready-to-install illuminated star for the radiator grille of the Actros driver's cabs from Tamiya. - Easy and quick installation of the lighting (with 2 screws). - 10 LEDs ensure even illumination of the logo. - Suitable for Tamiya Mercedes-Benz Actros tractors. A Zener diode (12V) is included for 5,1V operating voltage. This must be soldered into the supply line (note the polarity!).

Ready to ship in 5 days, delivery time 1-4 days

Product number: 10909

€ 82,99 * € 96,99 * (14.43% saved)

Subscriptions

Illuminated Mercedes-Benz star (white) for the Actros of

Illuminated Mercedes-Benz star (white) for the Actros from Tamiya. Suitable for 7,2 and 12V. Installation diameter: 30mm. Ready-to-install illuminated star for the radiator grille of the Actros driver's cabs from Tamiya. - Easy and quick installation of the lighting (with 2 screws). - 10 LEDs ensure even lighting of the logo. - Suitable for Tamiya Mercedes-Benz Actros tractors. A Zener diode (12V) is included for 5,1 V operating voltage. This must be installed in the supply line (note the polarity!). Turn your TAMIYA Mercedes-Benz Actros into an eye-catcher in no time at all. Our LED logo lighting lets this "star" shine in a very special light. The 10 built-in SMD LEDs produce even lighting, while installation is easy. Only the component R16 is replaced with the LED unit and screwed back into place at the existing points - done. The lighting can be controlled using an optional electronic switch (memory switch), depending on the remote control system. Input voltage from 7,2 V to 12 V/= LED color: white Scope of delivery: LED lighting wired ready for assembly, assembly instructions. Suitable for TAMIYA Mercedes-Benz Actros 300056348 (9674), 300056354 (10695), 300056342 (9048), 300056335 (7881).

Available immediately, delivery time: 1-4 days

Product number: 10910

€ 81,99 * € 96,99 * (15.47% saved)

Subscriptions

TAMIYA MB Arocs 3363/3348 front left/right including side indicators

TAMIYA MB Arocs 3363/3348 front left/right including side indicator LEDs. Ready-to-install lighting boards. For Kraftwerk EasyBus system.

Ready to ship in 14 days, delivery time 1-4 days

Product number: 11407

€ 79,90 *

Subscriptions

LED headlight boards for MB Arocs from Tamiya. Special

LED headlight boards for MB Arocs from Tamiya. Specially designed for the Tamiya Mercedes-Benz Arocs driver's cab. 7,2V version. MB headlight board 7,2 volts. Suitable for TAMIYA MB Arcos. 6 light functions: front indicator, side marker light with indicator function (as with the original vehicle, the indicator shines brighter than the marker light), parking light, driving light, high beam and fog light. Stranded cable (colored) length of approx. 200mm. Contents: 1 set (1 left and right board), fastening material, instructions. Attention: Not compatible with the TAMIYA MFCxx.

Available immediately, delivery time: 1-4 days

Product number: 10902

€ 62,99 * € 70,99 * (11.27% saved)

Subscriptions

LED spotlight boards for MB Arocs from Tamiya. specially

LED headlight boards for MB Arocs from Tamiya. Specially designed for the Tamiya Mercedes-Benz Arocs driver's cab. 12V version. MB headlight board 12 volts. Suitable for TAMIYA MB Arcos. 6 light functions: front indicator, side marker light with indicator function (as with the original vehicle, the indicator shines brighter than the marker light), parking light, driving light, high beam and fog light. Stranded cable (colored) length of approx. 200mm. Contents: 1 set (1 left and right board), fastening material, instructions. Attention: Not compatible with the TAMIYA MFCxx.

Available immediately, delivery time: 1-4 days

Product number: 10899

€ 62,99 * € 70,99 * (11.27% saved)

Subscriptions

ALU base plate / battery holder for MB Arocs from Tamiya

ALU base plate/battery holder for MB Arocs from Tamiya. Specially designed for the Tamiya Mercedes-Benz Arocs driver's cab. Only suitable for Mercedes-Benz Arocs 300056352. Replaces the battery holder included in the kit and moves it into the driver's cab. The driver's cab can still be tilted even after the conversion. The item 500907584 tank bracket set is also required to mount the tanks.

Available immediately, delivery time: 1-4 days

Product number: 10903

€ 61,99 * € 69,99 * (11.43% saved)

Subscriptions

Arocs headlamp circuit boards (1 pair). Servonaut

Arocs headlight boards (1 pair). The new boards from Servonaut automatically adjust to the battery voltage and are therefore suitable for 7,2-12V. For Arocs from Tamiya. Left + right. These boards fit the Tamiya Arocs 3363/3348/4151. The boards are suitable for 7.2 to 12 V and do not need to be converted. The lighting functions include indicators, parking lights (dimmed), low beam, high beam, fog lights or fog/cornering lights on the MB Actros/Arocs and MAN TGX as well as daytime running lights on the Actros. Optimized light guides for each individual LED ensure excellent optics. A 40cm long cable with PTFE insulation is included in the delivery. The headlights fit Tamiya Scania, Tamiya Actros, Tamiya Arocs, and Tamiya MAN TGX. All of them are compatible with Servonaut M20+/M24/ML4/LA10/K40. They are also suitable for all lighting systems with a common positive pole and at least 100mA switching capacity.

Available immediately, delivery time: 1-4 days

Product number: 10544

€ 61,80 *

Subscriptions

TAMIYA MB Arocs 3363 rear left / right. incl. series resistors.

TAMIYA MB Arocs 3363 rear left / right. incl. series resistors. Ready to install lighting boards. For power plant EasyBus system. NOT for Arocs 3348 rear dumpers!

Ready to ship in 14 days, delivery time 1-4 days

Product number: 11408

€ 59,80 *

Subscriptions

Carson warning bar suitable for the Scania 770 SLT. Inclusive

Carson warning bars and rotating beacons suitable for Scania 770 SLT. Electronics. Voltage 7,2V and 12V.

Available immediately, delivery time: 1-4 days

Product number: 10897

€ 57,99 * € 71,99 * (19.45% saved)

Subscriptions

Frame cover for MB Arocs from Tamiya. Especially on the

Frame cover for MB Arocs from Tamiya. Specially designed for the chassis of the Tamiya Mercedes-Benz Arocs and Actros (3 axle).

Available immediately, delivery time: 1-4 days

Product number: 10898

€ 53,99 * € 63,99 * (15.63% saved)

Subscriptions

1 cab lock V2A, with magnet for Tamiya AROCS.

1 driver's cab lock V2A, with magnet for Tamiya AROCS. Scale driver's cab lock made of stainless steel with magnet lock. Suitable for Tamiya AROCS driver's cabs. The lock is additionally secured with a spring clip. Dimensions: Width at top: 95mm Width at bottom: 73mm Hole at bottom: 53mm Hole at top: 25mm

Ready to ship in 5 days, delivery time 1-4 days

Product number: 11357

€ 53,90 * € 53,95 * (0.09% saved)

Subscriptions

CARSON Traverse / underrun protection for Tamiya Arocs 3348 tilt

CARSON aluminum cross member/underrun protection for Tamiya Arocs 3348. The rear cross member and the underrun protection have been optimized for use with the lift kit to maintain the coupling level. As soon as a lift kit is used, the level of the tow bar also moves upwards. With this cross member, the mounting point for the tow bar (item 7846, not included) is corrected. The tow bar then has the original coupling level again.

Available immediately, delivery time: 1-4 days

Product number: 11224

€ 49,99 * € 53,99 * (7.41% saved)

Subscriptions

MB Actros / Arocs rear light board. LH6MB of Servonaut

MB Actros/Arocs rear light board. The new LH6 boards from Servonaut automatically adapt to the battery voltage and are therefore suitable for 7,2-12V. Does not fit Arocs 3348. Item 11047 fits here. 7 or 8 LEDs per side and a combination of light guides, color and diffuser discs, which are included in the scope of delivery, ensure even and complete illumination of the chambers in the rear lights. The LH6 boards can be combined with all common lighting systems that switch minus, i.e. work with a common positive pole. - for 7.2 to 12 volts, no conversion necessary when changing to 12V - 5 light functions: indicator, parking light (dimmed), brake light, rear fog and reversing light - good optics thanks to 2x7 LEDs and included light guides, diffuser and color discs - high-quality 100cm long cable with PTFE insulation - suitable for Actros/Arocs and Servonaut M20+/M24/ML4/LA10/K40 - universally suitable for all lighting systems with a common positive pole - Scope of delivery: 2 boards (1x left, 1x right), light guide, diffuser - Illustration shows assembled rear light with original Tamiya parts (not included)

Available immediately, delivery time: 1-4 days

Product number: 10305

€ 38,29 *

Subscriptions

MB Arocs3348 backlight blanks. The new LH6 boards from S

MB Arocs3348 tail light boards. The new LH6 boards from Servonaut automatically adapt to the battery voltage and are therefore suitable for 7,2-12V. Only suitable for Tamiya Arocs3348/4151! 7 or 8 LEDs per side and a combination of light guides, color and diffuser discs, which are included in the scope of delivery, ensure even and complete illumination of the chambers in the rear lights. The LH6 boards can be combined with all common lighting systems that switch minus, i.e. work with a common positive pole. - for 7.2 to 12 volts, no conversion necessary when changing to 12V - 5 light functions: indicator, parking light (dimmed), brake light, rear fog and reversing light - good optics thanks to 2x7 LEDs and included light guides, diffuser and color discs - high-quality 100cm long cable with PTFE insulation - suitable for Arocs3348 and Servonaut M20+/M24/ML4/LA10/K40 - universally suitable for all lighting systems with a common positive pole - Scope of delivery: 2 boards (1x left, 1x right), light guide, diffuser discs - Image shows assembled rear light with original Tamiya parts (not included) NOT suitable for connection to the MFCxx from Tamiya!

Available immediately, delivery time: 1-4 days

Product number: 11047

€ 38,29 *

Subscriptions

SandMaster lift kit for Tamiya Mercedes-Benz Arocs

SandMaster lift kit for Tamiya Mercedes-Benz Arocs 4151. Raises the vehicle by 10mm. Cardan shafts with length compensation are required! Mount adapter plates on the frame and attach the axles to them. The rear axle pendulum from Tamiya is raised by 10mm with the new rear axle mounts! The installation (use) of the shock absorbers is no longer possible. Cardan shafts with length compensation must be used.

Available immediately, delivery time: 1-4 days

Product number: 12308

€ 35,30 *

Subscriptions

ALU cabin interlock for MB Arocs from Tamiya. specially

ALU cabin lock for MB Arocs from Tamiya. Specially designed for the Tamiya Mercedes-Benz Arocs cab. (replaces the split pin).

Available immediately, delivery time: 1-4 days

Product number: 10904

€ 33,99 * € 37,49 * (9.34% saved)

Subscriptions

Servonaut SandMaster Riser Kit for Arocs 3348 + 10mm

SandMaster lift kit for Tamiya Mercedes-Benz Arocs 3348. Lift by 10mm. A cardan shaft with length compensation is required. SandMaster lift kit for Arocs 3348 main frame from Tamiya, increase +10mm, scale 1:14. When using this increase, cardan shafts with length compensation are required (not included). Also suitable for other Tamiya frames, but additional holes in the frame may then be necessary.

Available immediately, delivery time: 1-4 days

Product number: 11213

€ 29,89 *

Subscriptions

ALU servo mount for MB Arocs from Tamiya. Specially on

ALU servo mount for MB Arocs from Tamiya. Specially designed for the Tamiya Mercedes-Benz Arocs driver's cab. Required when using the Carson 2-speed gearbox 500907265 and the aluminum base plate/battery holder 500907591. Only suitable for the Mercedes-Benz Arocs!