Scania tractor units

Tamiya Scania 770 S 8x4/4 SLT (56371) V8 kit

Tamiya Scania 770 S 8x4/4 (56371) kit unpainted. SLT version. The 2023 novelty in the truck sector can be described as a consistent decision by the manufacturer Tamiya. The S-series of Scanias is growing. Tamiya brings a heavy-duty tractor machine. The TOP model from the S series of the Swedish manufacturer Scania - the SCANIA 770S 8x4/4.Scania is now the only manufacturer that still offers a V8 engine and defies the trend of downsizing and alternative drives.The most powerful truck in the series draws 3.700 Newton meters and 770 hp from the 16-liter V8 engine and thus conjures up a smile on the face of every professional driver and truck enthusiast.But it's not just the inner values that count. The new 770 S comes with an aggressive front and the Scania's interior also leaves nothing to be desired in terms of equipment and space. The new 770S 8x4/4 tractor unit expands the series of Scania vehicles and is the logical step after the 770S and the R620. Tamiya is thus once again supplying a tractor unit after the Scania 770S Truck, the Volvo Tow Truck and the Arocs 4151 and has opted for the most powerful truck in the series. Thank you TamiyaTamiya article number 300056371The model has 4 axles, the rear two are driven. The two front axles are steering axles - the 2nd. Axle can be lifted!The aerodynamically designed driver's cab delights the scene.Driver's cab with high roof, aero package and stylish roof lamp bracket (can be retrofitted with LEDs).The driver's cab is attached from above or decreased upwards. The tilting mechanism with the mounting holes on the passenger side, often described as a "visual ugliness", no longer exists. The heavy-duty tower has several functional details that seem very well done: the tower paneling can be opened on both sides the 3 storage boxes can also be opened from the back the tank dummy holds the drive battery Details: 610 mm length 194 mm width 320 mm height - without antennas high roof mini radiator grille front lamp bracket (LEDs can be retrofitted) realistic roof lamp bracket (LEDs can be retrofitted) low bar faithful reproduction of the fittings (mirrors, antennas, exhaust system) true-to-scale interior fittings wide tires and wide rims 3-speed gearbox truck engine Mighty Tuned 35T (item 12788) trailer coupling (can be operated with optional servo) decoration set 770 driver figure faithful reproduction of the fittings (mirrors, antennas, heavy-duty tower, compressed air tank, fuel tanks, exhaust system, warning bars and lights) wide tires with chrome-plated wide rims for both front axles Ball bearings are supplied for the complete drive train.

Available immediately, delivery time: 1-4 days

Product number: 12710

€ 650,00 * € 850,00 * (23.53% saved)

Subscriptions

configure now

Tamiya Scania 770 S (56373) kit 1/14 silver pre-painted

Tamiya Scania 770 S (56373) kit 1/14 silver pre-painted The wishes of the model building community have been heard. Tamiya is bringing a bang for the new product in 2023. The TOP model from the S series of the Swedish manufacturer Scania.Scania is now the only manufacturer that still offers a V8 engine and defies the trend of downsizing and alternative drives.The most powerful truck in the series draws 3.700 Newton meters and 770 hp from the 16-liter V8 engine and thus conjures up a smile on the face of every professional driver and truck enthusiast.But it's not just the inner values that count. The new 770 S comes with an aggressive front and the Scania's interior also leaves nothing to be desired in terms of equipment and space.The new 770 S tractor unit expands the series of Scania vehicles and is therefore the logical step after the R470 and the R620.After the Volvo Timber Truck, the Volvo Tow Truck and the Arocs 4151, Tamiya is once again delivering a tractor unit and has opted for the most powerful truck in the series. Thank you TamiyaTamiya article number 300056373The model has 3 axles, the rear two of which are driven. The aerodynamically designed driver's cab delights the scene.The driver's cab is attached from above or removed upwards. The tilting mechanism with the mounting holes on the passenger side, often described as "visually unsightly", is no longer available. Details: 532 mm length 193 mm width 307 mm height high roof mini grille front lamp bar (LEDs can be retrofitted) realistic roof lamp bar (LEDs can be retrofitted) low bar (LEDs can be retrofitted) side bar (side panel illumination lights) (LEDs can be retrofitted) faithful reproduction of the fittings (mirrors, antennas, exhaust system) true to the original interior wide tires and wide rims 3-speed gearbox decoration set pre-painted with Scania Vabis decor the driver's cab is pre-painted in TS-17 aluminum silver required accessories remote control with at least 4 channels steering servo shift servo speed controller 7,2V battery (racing pack) charger paint Tamiya recommends using the MFC-03 as a sound module, lighting system and speed controller the instructions for the Tamiya Scania 770 S are available for download

Available immediately, delivery time: 1-4 days

Product number: 13015

€ 539,00 * € 590,00 * (8.64% saved)

Subscriptions

configure now

Tamiya Scania 770 S (56368) V8 kit. King of the Road

Tamiya Scania 770 S (56368) kit 1/14 Unpainted. The wishes of the model building community have been heard. Tamiya is bringing a great new product for 2022. The TOP model from the S series of the Swedish manufacturer Scania.Scania is now the only manufacturer that still offers a V8 engine and defies the trend of downsizing and alternative drives.The most powerful truck in the series draws 3.700 Newton meters and 770 hp from the 16-liter V8 engine and thus conjures up a smile on the face of every professional driver and truck enthusiast.But it's not just the inner values that count. The new 770 S comes with an aggressive front and the Scania's interior also leaves nothing to be desired in terms of equipment and space.The new 770 S tractor unit expands the series of Scania vehicles and is therefore the logical step after the R470 and the R620.After the Volvo Timber Truck, the Volvo Tow Truck and the Arocs 4151, Tamiya is once again supplying a tractor unit and has opted for the most powerful truck in the series. Thank you TamiyaTamiya article number 300056368The model has 3 axles, the rear two of which are driven. The aerodynamically designed driver's cab delights the scene.The driver's cab is attached from above or removed upwards. The tilting mechanism with the mounting holes on the passenger side, often described as "visually unsightly", is no longer available. Details: 532 mm length 193 mm width 307 mm height high roof mini radiator grille front lamp bar (LEDs can be retrofitted) realistic roof lamp bar (LEDs can be retrofitted) low bar (LEDs can be retrofitted) side bar (side panel illumination lights) (LEDs can be retrofitted) faithful reproduction of the fittings (mirrors, antennas, exhaust system) true-to-original interior fittings wide tires and wide rims 3-speed gearbox decoration set with Scania Vabis decor The color shown is TS-58 light blue pearl effect and looks even better in real life than in photos. For the first time, the fenders are white, which makes it easier to paint the fenders in the color of the vehicle. Required accessories Remote control with at least 4 channels Steering servo Shift servo Drive controller 7,2V battery (Racing-PAck) Charger Paint Tamiya recommends using the MFC-03 as a sound module, lighting system and drive controller The instructions for the Tamiya Scania 770 S are available for download

Available immediately, delivery time: 1-4 days

Product number: 12397

€ 480,00 * € 560,00 * (14.29% saved)

Subscriptions

configure now

Power plant set with RS1 for Scania 770 S from Tamiya

Set consisting of RS1 and circuit boards for front and rear. Speed controller, lighting system, sound module in one incl. Complete lighting for Scania 770 S from Tamiya. Robust speed controllerThe speed controller can be permanently loaded with 25A and, thanks to the 32kHz control, is also suitable for bell-armature motors. It offers manual transmission support for up to four gears, a clutch function, handbrake, optional inertia simulation and a cruise control function, which does not work like the competition (stick deflection controls acceleration), but like the original: the throttle deflection controls the speed and the cruise control is activated by pressing a button. Pressing the button again or braking deactivates the cruise control.Extraordinary soundKraftwerK is once again setting standards in programmability. While the competition can only use a few sound snippets for the driving sound, KraftwerK can use as many as you like and it works as follows: First, the speed range is defined, e.g. 500 rpm immediately after starting and 2300 rpm when the engine is running out. Then sound snippets are stored for any number of areas and defined with base speed, minimum and maximum. At minimum the sound is faded in at a speed-adjusted level, at it is played at full volume and at a speed of 1:1, and up to maximum it is again adjusted to the speed and finally faded out. The snippets can and should of course overlap, which can create an ultra-realistic sound. In total there are three sound tracks: 2x acceleration and 1x deceleration. The first sound track is the normal driving sound, the second sound track can either be mixed proportionally as a load or switched. The third sound track is the delay sound and is automatically added when you release the joystick. If that's too complicated for you, you'll be pleased to know that 3 high-quality sounds are already included with the module. In the future there will also be a sound library with premium sounds that can be purchased for a few euros and downloaded via the ControlPanel and saved on your own module.Unlimited expandabilityKraftwerK's leading role in the field of RC bus systems is now fully evident in the RS1. The RS6 can be expanded as required via the 1 EasyBus outputs. Lighting boards, switching extensions, servo controls and much more can be controlled via the EasyBus. But the RS1 has one more special gimmick: on the upper side there are four individual sockets that are barely visible and can be used to plug in another module. The first module in this series is the BL8A, an 8A brushless controller designed for hydraulic pumps.Versatile connections / technical dataBattery (6 - 20V)Motor 25A, up to 32kHz, brush and bell-armature motor5 servo inputs or SUMD, IBUS, SBUS, CPPM5 servo outputs6 bus outputs8 switching outputs 500mA2 switching outputs 10AInfrared transmitter (diode included)SpeakerDimensions 63x44x28mmCharacteristics of the drive controllerOperating voltage 6-20VBEC 6V / 3ATimension frequency adjustable up to 32kHZClutch functionHandbrake functionManual transmission supportAdjustable inertia simulationAdjustable cruise controlProtection functions: battery undervoltage, motor short circuit, overtemperatureFunctions for servo outputsProportional functionProportional function directPropFunction switchedTwo positionsThree positionsFifth wheel plateTrailer supports MotorDump truck/tipper MotorRamp/Platform MotorManual transmissionSound featuresUnlimited number of sounds10-15 sounds that can be played simultaneouslyPlay modes: Touch, loop, once, permanent, random, stop pointsFormats: WAV, MP3 Usable sampling rate: All (automatic conversion to 44.100)Volume control: Potentiometer, via channel, via softwareSD card: max.

Available immediately, delivery time: 1-4 days

Product number: 13185

€ 439,80 *

Subscriptions

Tamiya Scania Highline R620 6x4, 3-axis. Kit. blue

Tamiya Scania R620 (56327) kit 1/14 Scania R620 6x4 Highline. PAINTED BLUE! Color: Tamiya color TS-51. Complete kit for building a driving model. To complete the model as a driving model, you will also need:Drive battery, RC components (remote control, servos, etc.)The kit contains:Pre-drilled and threaded frame components.All parts for 2 driven axles with differential.1 non-driven steering axle.Leaf spring packages for all axles.Rims and tires, plastic fenders.Painted plastic driver's cab. (Polystyrene)Painted plastic parts for attachment to the driver's cab.Windows, mirrors, windshield wipers and other attachments.True-to-original interior fittings, functional fifth wheel coupling. Headlights, indicators, taillight units - without lighting fixtures.Switchable 3-speed gearbox (kit), cardan shaft, electric motor (7,2V), plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, etc., decoration set (stickers). Richly illustrated, comprehensive assembly instructions.Technical data:Length: 530mm, width: 187mm, height: 293mm.Weight: 3000g.

Available immediately, delivery time: 1-4 days

Product number: 7444

€ 425,00 * € 495,00 * (14.14% saved)

Subscriptions

configure now

Tamiya Scania Highline R620 6x4, 3-axis. kit

Tamiya Scania R620 (56323) kit 1/14 Scania R620 6x4 Highline. Unpainted. Complete kit for building a driving model. To complete the model as a driving model, you will also need:Paint(s), drive battery, RC components (remote control, servos, etc.)The kit contains:Pre-drilled and threaded frame components.All parts for 2 driven axles with differential.1 non-driven steering axle.Leaf spring packages for all axles.Rims and tires, plastic fenders.Unpainted plastic driver's cab. (Polystyrene)Unpainted plastic parts for attaching to the driver's cab.Windows, mirrors, windshield wipers and other attachments.True-to-original interior fittings, functional fifth wheel coupling. Headlights, indicators, taillight units - without lighting fixtures.Switchable 3-speed gearbox (kit), cardan shaft, electric motor (7,2V), plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, etc., decoration set (stickers). Richly illustrated, comprehensive assembly instructions.Technical data:Length: 500mm, width 230mm.Weight: 3000g.

Available immediately, delivery time: 1-4 days

Product number: 5999

€ 409,00 * € 475,00 * (13.89% saved)

Subscriptions

configure now

Tamiya Scania Highline R470, Kit. 4x2 suspension

1x Tamiya Scania R470 (56318) kit 1/14 Scania R470 Highline. Unpainted. Complete kit for building a driving model. To complete the model as a driving model, you will also need:Paint(s)Drive batteryRC components (remote control, servos, etc.)The kit contains:Pre-drilled and threaded frame components.All parts for 1 driven axle with differential.1 non-driven steering axle.Leaf spring packages for all axles.Rims and tires.Plastic fenders.Unpainted plastic driver's cab. (Polystyrene)Unpainted plastic parts for attachment to the driver's cab.Windows, mirrors, windshield wipers and other attachments.Original interior fittings.Functional fifth wheel coupling.Headlights, indicators, tail light units - without lighting fixtures.Switchable 3-speed gearbox (kit), cardan shaft.Electric motor (7,2V).Plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, etc.Decorative set (stickers).Richly illustrated, comprehensive assembly instructions.Technical data:Length: 452mm, width: 187mm, height: 293mm, weight: 2,45kg.

Available immediately, delivery time: 1-4 days

Product number: 3177

€ 350,00 * € 400,00 * (12.5% saved)

Subscriptions

Tamiya Scania R470 (56364) kit 1/14 Scania R470 silver

1x Tamiya Scania R470 (56364) kit 1/14 Scania R470 Highline. Special edition. Silver edition. Painted body parts! Painted with TS-17. Complete kit for building a driving model. To complete the model as a driving model, you will also need:Drive battery, RC components (remote control, servos, etc.)The kit contains:Pre-drilled and threaded frame components.All parts for 1 driven axle with differential.1 non-driven steering axle.Leaf spring packages for all axles, rims and tires. Plastic fenders. Painted plastic driver's cab (polystyrene).Painted plastic parts for attachment to the driver's cab.The injection-molded parts are already painted: F, H, K and M.Window, mirrors, windshield wipers and other attachments.True-to-original interior, functional fifth wheel coupling. Headlights, indicators, tail light units - without lighting fixtures.Switchable 3-speed gearbox (kit), cardan shaft, electric motor. Plastic parts for servo mounts, battery compartment.All necessary small parts such as: screws, nuts, plain bearings, springs, washers, threaded rods, bolts, etc., decoration set (stickers). Richly illustrated, comprehensive assembly instructions.Technical data:Length: 452mm, height: 293mm, width 187mm, weight: 2,45kgKit model in 1:14 scale.Prototypical interior with seats and dashboardTamiya 2-axle chassis3-speed manual gearboxLeaf springs on the axles and rear shock absorbers with coil springsRecommended accessories: MFC-03 multifunctional unit (item 8484) for light, sound and driving functions.Alternatively, we recommend the SFR-1 sound controller (item 10974).

Available immediately, delivery time: 1-4 days

Product number: 12148

€ 319,00 * € 465,00 * (31.4% saved)

Subscriptions

configure now

Kingbus lighting set for the SCANIA 770S TAMIYA model

Kingbus lighting set for the SCANIA 770S model from Tamiya. Kingbus system. Complete set of central module, light boards, various cables and distributors and accessories. The light modules are delivered fully assembled and tested. They only need to be installed in the model. Adjustments to the housing may be necessary!Light boards for the Scania models Scania 770S from Tamiya with only two cables.The light modules are delivered fully assembled and tested. They only need to be installed in the model. Little or no adjustments to the housing are necessary!The lights can be controlled via the Kingpad (not included).The central module & Kingpad are not required for remote control systems from the brands Brixl, ScaleArt Commander and Blauzahn.Instead, the Kingbus interface is connected to the assigned receiver slot. This controls the lighting functions via the standard Kingbus cable!The Kingpad is not required in this case, as the lighting functions can be operated via switches and buttons on the remote control.Expanding the lighting system with new lighting modules is simple - just plug them in!Features:Parking light (fiber optic)Dipped beam (only with parking light)High beam (latching only with dipped beam)High beam flasherFog light and rear fog lightBrake light via driving channelReversing light via driving channel or KingpadIndicator left / right and front / rearIndicator reset via steering channelHazard warning lightsautomatic. Cornering light when steering or blinkingXenon effect!Scope of delivery:1 Kingbus central module dimensions: 34x23,5x8mm2 patch cable for connecting the central module to the receiver1 Kingbus 4-way distributor 50cm1 Kingbus 4-way distributor 15 cm8 light modules (cable length 150mm each)- 2x front- 2x rear lights- 2x low bar- 4x side lighting- 1x grill headlight- 2x position LED1 universal module ROOF4 light guide insertsTechnical data:Operating voltage: 5V via BECCurrent consumption: approx. 20mA (at rest)

Available immediately, delivery time: 1-4 days

Product number: 12809

€ 288,99 *

Subscriptions

Kingbus lighting set for the SCANIA 770SLT model

Kingbus lighting set for the SCANIA 770SLT model from Tamiya. Kingbus system complete set of central module, light circuit boards, various cables and distributors and accessories. The light modules are delivered fully assembled and tested. They only need to be installed in the model. Adjustments to the housing may be necessary!Light circuit boards for the Scania model Scania 770SLT 8x4 from Tamiya with only two cables.The light modules are delivered fully assembled and tested. They only need to be installed in the model. Little or no adjustments to the housing are necessary!The lights can be controlled via the Kingpad (not included).The central module & Kingpad are not required for remote control systems from the brands Brixl, ScaleArt Commander and Blauzahn.Instead, the Kingbus interface is connected to the assigned receiver slot. This controls the lighting functions via the standard Kingbus cable! The Kingpad is not required in this case, as the lighting functions can be operated via switches and buttons on the remote control. Expanding the lighting system with new lighting modules is simple - just plug them in! Features: Parking light (fiber optic) Low beam (only with parking light) High beam (latching only with low beam) Headlight flasher Fog light and rear fog light Brake light via driving channel Reversing light via driving channel or Kingpad Turn signals left/right and front/rear Turn signal reset via steering channel Hazard warning lights Automatic cornering light when steering or flashing Xenon effect! Scope of delivery: 1 Kingbus central module Dimensions: 34x23,5x8mm 2 patch cables for connecting the central module with the receiver 1 Kingbus 4-way distributor 75cm 1 Kingbus 4-way distributor 15cm 8 light modules (cable length 150mm each) - 2x front - 2x rear lights - 1x grill headlight - 4x side lighting - 1x roof lights - 2x position LED - 4x side limit LED 1 universal module ROOF 4 light guide inserts Technical data: Operating voltage: 5V via BEC Current consumption: approx. 20mA (at rest)

Available immediately, delivery time: 1-4 days

Product number: 13149

€ 288,99 *

Subscriptions

EasyBus lighting system KLM 4 / 16 TAMIYA Scania R470 and R620

EasyBus lighting system KLM 4/16 for Tamiya Scania R470 and R620. The lighting system for the TAMIYA Scania R470 and R620 with the new KLM 4/16, ready-to-install lighting boards and integrated infrared transmitter. The front lighting boards are simply inserted into the light chambers from behind and are held in place by a press fit. For the rear taillights, the original bars must be removed and a hole drilled for the cable to pass through. The boards are glued into the machined lamp bodies including the supplied dividers. The mentioned dividing grids create the original division into five chambers and at the same time provide mounts for the lamp lenses.The system is controlled by a KLM 4/16, which is compatible with normal forward-reverse speed controllers (with or without separate brake), cruise control controllers and all sound modules.The light functions can be controlled either with our control pad or in numerous other ways, for details please refer to the online manual.This starter set includes a complete lighting system for the Scania R470 and R620 from TAMIYA and consists of two front lighting boards and two rear ones, as well as a KLM 4/16 light assistant.The lighting boards are connected directly to the KLM 4/16 and can also be configured via this with our Kraftwerk ControlPanel. Brightness, flashing speeds, but also the basic functionality (e.g.: should the high beam be switched on at the output) can be set separately for each output. Information about this can be foundHighlights & DetailsKLM 4/16 (4 servo inputs, 16 switching outputs, 5 bus outputs) Ready-to-install lighting boardsPlug & Play solution (connect and drive)Compatible with all sound modulesCompatible with all speed controllersCompatible with Tamiya MFUExpandable with a wide variety of lighting boardsExpandable with infrared for trailer lightingCan be adapted to the model down to the smallest detail via PCNo programming knowledge requiredPC software can be downloaded free of chargeTechnical specificationsPower supply:via receiver power supply (BEC of the speed controller)Max. Power consumption 20mA per device and 20mA per LEDLEDs at the front (per side):yellow: 1x 3mmwhite: 2x 3mm, 2x 5mmUltra-bright high-performance LEDsAdditional outputs at the front 3 with 180 Ohm resistance eachLEDs at the rear (per side):red: 4x SMD 1206yellow: 1x SMD 1206white: 1x SMD 1206Ultra-bright high-performance LEDsAdditional outputs at the rear 1 each with 180 Ohm resistanceScope of deliveryLight assistant KLM 4/16four ready-to-install lighting boards (2x front, 2x rear)

Available immediately, delivery time: 1-4 days

Product number: 11000

€ 230,81 *

Subscriptions

1 roof lightbar for SCANIA by Tamiya, plated with 4

1 roof lamp bracket for SCANIA from Tamiya, nickel-plated with 4 upright lamps, chrome-plated with white ANGEL-EYE effect! Bracket diameter 5mm. Suitable for 7,2V-12V. Total width 128mmDepth approx. 32mmDistance to roof surface approx. 5mmAttached to the vehicle roof with 2 screws.Available from stock!The SMD LED boards are equipped with series resistors for operation with 7,2-12 volts. Longer wire = positive pole!Scope of delivery:1 roof lamp bracket made of 5mm round material, chrome-plated, for SCANIA (Tamiya)4 chrome-plated headlight housings, suitable for the 5mm bracket (207081). 4 circuit boards with white SMD LEDs with series resistors.2 Zener diodes 5,1V (only required when operating on 12V!).4 chrome-plated reflectors, matching the headlight housings.Screws for fastening to the lamp bracket.4 clear light discs.4 blue-tinted light discs.Instructions.White angel eye effect (parking light) and white high beam light.Lamp diameter approx. 16mmLight disc diameter approx. 14mmTotal height with holder approx. 25mmSuitable for bracket diameters of 5mmAvailable from stock!

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9099

€ 168,06 *

Subscriptions

1 roof lightbar for SCANIA by Tamiya, plated with 4

1 roof lamp bracket for SCANIA from Tamiya, nickel-plated with 4 upright lamps, chrome-plated with blue ANGEL-EYE effect! Bracket diameter 5mm. Suitable for 7,2V-12V. Total width 128mmDepth approx. 32mmDistance to roof surface approx. 5mmAttached to the vehicle roof with 2 screws.Available from stock!The SMD LED boards are equipped with series resistors for operation with 7,2-12 volts. Longer wire = positive pole!Scope of delivery:1 roof lamp bracket made of 5mm round material, chrome-plated, for SCANIA (Tamiya)4 chrome-plated headlight housings, suitable for the 5mm bracket (207081). 4 circuit boards with white and blue SMD LEDs with series resistors.2 Zener diodes 5,1V (only required when operating on 12V!).4 chrome-plated reflectors, matching the headlight housings.Screws for fastening to the lamp bracket.4 clear light discs.4 blue-tinted light discs.Instructions.Blue angel eye effect (parking light) and white high beam light.Lamp diameter approx. 16mmLight disc diameter approx. 14mmTotal height with holder approx. 25mmSuitable for bracket diameters of 5mmAvailable from stock!

Available immediately, delivery time: 1-4 days

Product number: 9488

€ 164,55 *

Subscriptions

1 complete set lighting boards for Scania of Tamiy

1 COMPLETE SET of lighting boards for SCANIAs from Tamiya. Ready-to-connect LED boards for 7,2V! With series resistors and color-coded connecting wires. VALUE PACK!Scope of delivery: (for 7,2V)Headlight lighting boards (1x left/1x right) suitable for SCANIAs from Tamiya. With color-coded connecting wires (approx. 20cm long). Light functions:IndicatorSide marker light with flashing functionParking lightDriving lightHigh beamFog lightTail light lighting boards (1x left, 1x right) with approx. 50cm cable.-Indicator-Tail light-Brake light-Fog tail light-Reverse lightInstructions

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9271

€ 120,94 *

Subscriptions

Servonaut headlight board LV7770S front lighting set

Servonaut headlight board LV7770S. Front lighting set including boards, light guides and diffusers 7,2-12V. For Scania 770 S from Tamiya Complete set with two boards and mounting insertsFor 7.2 to 12 volts, no conversion necessary when changing to 12V, no external resistors requiredLight functions: parking light, driving light, high beam, fog/corner lightSpecial features:Daytime running light in two brightnessesSide indicatorsSuitable for Tamiya Scania 770SSuitable for minus-switching lighting systemsScope of delivery2 boards (left/right)Light insertWiring harnessSmall partsIncludes two side marker lights per side that flashRecommended for experienced model builders

Available immediately, delivery time: 1-4 days

Product number: 12645

€ 119,00 *

Subscriptions

1 complete set lighting boards for Scania of Tamiy

1 COMPLETE SET of lighting boards for SCANIAs from Tamiya. Ready-to-connect LED boards for 12V! With series resistors and color-coded connecting wires. VALUE PACK!Scope of delivery: (for 12V)Headlight lighting boards (1x left/1x right) suitable for SCANIAs from Tamiya. With color-coded connecting wires (approx. 20cm long). Light functions:IndicatorSide marker light with flashing functionParking lightDriving lightHigh beamFog lightTail light lighting boards (1x left, 1x right) with approx. 50cm cable.-Indicator-Tail light-Brake light-Fog tail light-Reverse lightInstructions

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9270

€ 107,70 *

Subscriptions

EasyBus lighting boards for Tamiya SCANIA 770S front

1x EasyBus lighting board for Tamiya SCANIA 770S and 770S SLT, front. Suitable for the EasyBus system. The plug & play solution. Lighting boards for TAMIYA SCANIAs 770S and SLT Scope of delivery:1x lighting board for Tamiya SCANIA 770S, left1x lighting board for Tamiya SCANIA 770S, rightPlug & PlayPerfect fit for the front of the Tamiya Scanias.With 3-pin plug connection. Integrated series resistors. With 3 individually usable additional outputs. Connection wires each approx. 30cm long. Power supply from the receiver output. The following functions can be controlled with the main module LIGHT ASSISTANT: - Parking light - Low beam - High beam - Fog light - Headlight flasher - Left/right indicator with wiping effect - Hazard warning lights - Xenon effect - Daytime running lights (LEDs) - Cornering light and turning light - 3 freely programmable additional outputs (plug-in)

Product number: 13203

€ 99,79 *

Subscriptions

Scania 770S roof lighting set. Includes KLB-12 roof LEDs

Scania 770S roof lighting set. Includes KLB-12 roof, 5 wired LEDs for roof lamp bracket, 2 wired LEDs for sun visor and roof reflector including circuit board.

Available immediately, delivery time: 1-4 days

Product number: 13186

€ 89,90 *

Subscriptions

1 roof lightbar for SCANIA by Tamiya, plated with 4

1 roof lamp bracket for SCANIA from Tamiya, nickel-plated with 4 standing lamps, chrome-plated with blue-tinted light discs 500907064 Bracket diameter 5mm Lamp diameter approx. 16mmLight disc diameter approx. 14mmTotal height with holder approx. 25mmFor bracket diameter of 5mm

Available immediately, delivery time: 1-4 days

Product number: 3819

€ 79,99 * € 82,99 * (3.61% saved)

Subscriptions

Position lamp LEDs for Scania 770S. For Tamiya Scania

Position light LEDs for Scania 770S. For Tamiya Scania 770S. 21 LEDs for various lighting functions. Position light set for Scania 770S from Tamiya. Consists of 21 LEDs. Light functions: Position lights with high beam (roof) 5x roof light brackets Bumper light brackets Indicators (fender) Additional headlights Radiator grill Position lights (side panel) Not compatible with TAMIYA MFC-01/03!

Ready to ship in 5 days, delivery time 1-4 days

Product number: 12838

€ 79,98 * € 85,99 * (6.99% saved)

Subscriptions

1x sun visor made of aluminum for all Scania cabs (eg

1x sun visor made of aluminum for all Scania driver's cabs (eg from Tamiya). 7,2-12V. Complete with light discs and LEDs and holders, small parts. VERSION 2. Scope of delivery:1 suitably milled and curved sun visor with headlights made of aluminum.3 milled holders made of aluminum.4 light discs (square).4 LEDs 3mm, white.16 LEDs 2mm, white. (for 4 groups of 4 each).12 LEDs 2mm, orange. (for 3 groups of 4 each).Series resistorsScrews for fastening.Instructions.Available from stock!Suitable replacement items:-LED 3mm white, item 8191-Resistor 220 and 330 Ohm-LED 1,8mm white, item 6332-LED 1,8mm orange, item 10315

Ready to ship in 5 days, delivery time 1-4 days

Product number: 7346

€ 79,94 *

Subscriptions

Front lamp bracket for SCANIA from Tamiya, nickel-plated with 4

Front lamp bracket for SCANIA from Tamiya, nickel-plated with 4 lamps, chrome-plated with blue-colored light discs. (500907065) Lamp diameter approx. 16mmLight disc diameter approx. 14mmTotal height with holder approx. 25mmSuitable for bracket diameters of 5mmYou can find suitable lighting boards:for 7,2V: item 7440for 12V: item 7645

Ready to ship in 5 days, delivery time 1-4 days

Product number: 3818

€ 75,99 * € 82,99 * (8.43% saved)

Subscriptions

EasyBus lighting boards for Tamiya SVANIA 770S rear

1x EasyBus lighting board for Tamiya SCANIA 770S and 770S SLT, rear. Suitable for the EasyBus system. The plug & play solution. 1x EasyBus lighting board for Tamiya SCANIA 770S and 770S SLT, rear. Suitable for the EasyBus system. The plug & play solution. Suitable for the Tamiya SCANIA 770S and 770S SLT.Scope of delivery:1x lighting board for Tamiya SCANIA 770S, rear, left1x lighting board for Tamiya SCANIA 770S, rear, rightPlug & PlayPerfect fit for the tail lights of the Tamiya SCANIAs.With 3-pin plug connection. Integrated series resistors.Connection wires approx. 60cm long.Power supply comes from the receiver output.The following functions can be controlled with the main module LIGHT ASSISTANT:-Parking light/tail light-Brake light-Reversing light-Left/right indicator (wiping indicator)-Hazard lights-American indicator-Rear fog light-3 freely programmable additional outputs (pluggable)

Available immediately, delivery time: 1-4 days

Product number: 13204

€ 69,79 *

Subscriptions

1 pair of headlights boards 7,2V for Scania by Tamiya

1 set of headlight boards 7,2V for SCANIAs from Tamiya. Ready-to-connect LED boards (left/right) with series resistors and color-coded connecting wires 5 light functions. (500907565). Headlight lighting boards (1x left/1x right) suitable for the SCANIAs R470 and R620 from Tamiya. With color-coded connecting wires (approx. 20cm long). NOT suitable for the Scania 770S. Light functions: Indicators Parking light Driving light High beam Fog light Scope of delivery: 1x right headlight board for 7,2V 1x left headlight board for 7,2V Instructions

Available immediately, delivery time: 1-4 days

Product number: 8913

€ 63,99 * € 70,99 * (9.86% saved)

Subscriptions

Servonaut cab connector system FHS770S for wiring

Servonaut cab connector FHS770S. 10-pin plug-in system for cab wiring. Plug and coupling with assembly material and cable set for Scania 770 S from Tamiya

Available immediately, delivery time: 1-4 days

Product number: 12647

€ 63,50 *

Subscriptions

Servonaut Scania headlamp boards (1 pair) 7,2-12 V

Scania headlight boards (1 pair). The new boards from Servonaut automatically adapt to the battery voltage and are therefore suitable for 7,2-12V. For Scanias from Tamiya. Left + right. Suitable for the Scania models R470, R620 (all versions). Not suitable for Scania 770S. The boards are suitable for 7.2 to 12 V and do not need to be converted. The lighting functions include indicators, parking lights (dimmed), low beam, high beam, fog lights or fog/cornering lights on the MB Actros/Arocs and MAN TGX as well as daytime running lights on the Actros. Optimized light guides for each individual LED ensure excellent optics. A 40cm long cable with PTFE insulation is included in the delivery. The headlights are suitable for Tamiya Scania, Tamiya Actros, Tamiya Arocs, and Tamiya MAN TGX. All of them are compatible with Servonaut M20+/M24/ML4/LA10/K40. They are also suitable for all lighting systems with a common positive pole and at least 100mA switching capacity.

Available immediately, delivery time: 1-4 days

Product number: 10393

€ 59,50 *

Subscriptions

1 pair of headlights boards 12V for Scania by Tamiya

1 set of headlight boards 12V for SCANIAs from Tamiya. Ready-to-connect LED boards (left/right) with series resistors and color-coded connecting wires 5 light functions. (500907566). Headlight lighting boards (1x left/1x right) suitable for the SCANIAs from Tamiya. With color-coded connecting wires (approx. 20cm long).Light functions:IndicatorParking lightDriving lightHigh beamFog lightScope of delivery:1x right headlight board for 12V1x left headlight board for 12VInstructions

Available immediately, delivery time: 1-4 days

Product number: 8912

€ 55,99 * € 57,99 * (3.45% saved)

Subscriptions

Servonaut rear light board LH6770S rear lighting set

Servonaut rear light board LH6770S. Rear lighting set including boards, light guides and lenses 7,2-12V. For Scania 770 S from Tamiya. Voltage: 7,2 to 12 volts, no conversion necessary when changing to 12V, no external resistors requiredExtends the rear lights, no drilling or sandingLight functions:IndicatorParking light including side marker lightTail lightBrake lightRear fog and reversing lightVery good optics thanks to the included light guides, lenses and color lensesHigh-quality 100cm long cable with PTFE insulationSuitable for Tamiya Scania 770 S and Servonaut systemsUniversally suitable for all lighting systems with >100mA switching outputs and a common positive poleScope of delivery2 boards (1x left, 1x right)Light guideLensesImage shows assembled rear light with original Tamiya parts (not included in delivery)Warning: small parts! Assembly requires experience in model making

Available immediately, delivery time: 1-4 days

Product number: 12646

€ 52,60 *

Subscriptions

KLB 12-roof expansion board with 12 outputs

KLB 12-roof expansion board. The expansion board offers the following options: 8 light functions, 4x 500mA outputs, RGB output, servo output, bus output. Plug & Play solution. Technical dataDimensions 23 x 31 x 13mmNumber of switching outputs: 12Current load capacity of the outputs: 500mA eachVoltage at the plus output: BEC voltage (5-6V)LED series resistor integrated: on 8 outputsPower supply: via bus, (BEC of the speed controller)Max. current consumption: 25mAWith the module, which is only 23 x 31mm, the bus system can be expanded by a further twelve outputs. Eight have integrated series resistors, the top four outputs can be loaded with up to 500mA. It is simply connected to one of the EasyBus outputs of the light assistant and is thus automatically integrated into the system. The outputs of the expansion board offer exactly the same functionality as RS1, KLM & Co. In addition to some effect lighting, you can choose from all the usual lighting functions in the original and more:Combined front light (parking light, low beam, high beam, headlight flasher and fog light)Combined rear light (parking light, brake light, rear fog light)American rear light (parking light, brake light, indicator)Daytime running light with automatic lowering when indicator is activatedCornering lightCorner lightReversing lightIndicator, hazard lights, American indicatorMulti-flashing light, strobe lightRunning lightRevolving lightKnightRiderIn addition to the basic behavior of the individual outputs, the brightness, the switching on and off speed, and the switching on and off duration for flashing functions can also be set.Scope of delivery1x KLB 12 - roof expansion board

Available immediately, delivery time: 1-4 days

Product number: 13165

€ 49,90 *

Subscriptions

1 set taillight boards 7,2V for SCANIA Tamiya

1 set of tail light boards 7,2V for SCANIA from Tamiya. Ready-to-connect LED boards (left/right) with series resistors and color-coded connecting wires. 5 light functions. (500907567). Tail light lighting boards (1x left/1x right) suitable for SCANIAS from Tamiya. With color-coded connecting wires (approx. 45cm long).Light functions:IndicatorTail lightBrake lightRear fog lightReversing lightScope of delivery:1x right tail light board for 7,2V1x left tail light board for 7,2VChamber separators and insulation plates (plastic)Instructions

Available immediately, delivery time: 1-4 days

Product number: 9176

€ 49,75 * € 52,49 * (5.22% saved)

Subscriptions

1x racing battery pack with SUB-C cells 7,2V 6 cells

1x racing battery pack with SUB-C cells, 7,2V 6 cells, 4500mAh with Tamiya plug. SUB-C cells. Dimensions approx. 137x47x25mm. Approx. 418 g, NiMH, R3x2 design. With silicone wires! This battery pack fits in the standard battery compartment of all Tamiya tractors! 4500mAh - for particularly long driving fun!!! You can find the matching charging cable under item number 1867 - here in the shop. Discontinued item! Successor item: 9680!

Available immediately, delivery time: 1-4 days

Product number: 8196

€ 49,00 * € 54,90 * (10.75% saved)

Subscriptions

Scania taillight board. LH6SC boards of Servonaut

Scania tail light board. The new LH6 boards from Servonaut automatically adapt to the battery voltage and are therefore suitable for 7,2-12V. For R470 and R620. 7 or 8 LEDs per side and a combination of light guides, color and diffuser discs, which are included in the scope of delivery, ensure even and complete illumination of the chambers in the rear lights.The LH6 boards can be combined with all common lighting systems that switch minus, i.e. work with a common positive pole.- for 7.2 to 12 volts, no conversion necessary when changing to 12V- 5 light functions: indicator, parking light (dimmed), brake light, rear fog and reversing light- extends the rear lights to 5 chambers, no drilling or sanding- good optics thanks to 2x8 LEDs and included light guides, diffuser and color discs- high-quality 100cm long cable with PTFE insulation- suitable for Tamiya Scania and Servonaut M20+/M24/ML4/LA10/K40- universally suitable for all lighting systems with a common positive pole- scope of delivery: 2 boards (1x left, 1x right), light guide, Diffuser - Image shows assembled tail light with original Tamiya parts (not included) Suitable for Tamiya R470 and R620.

Available immediately, delivery time: 1-4 days

Product number: 10306

€ 47,29 *

Subscriptions