cardan shafts/joints

PAGE

Cardan Set 60-200mm -ScaleDRIVE-

1x Cardan Set Scale Drive. adjustable from 60-210mm. For diameters 4mm and 5mm shaft, aluminum shot.

Available immediately, delivery time: 1-4 days

Product number: 9641

€ 37,00 *

Subscriptions

Cardan Set 46-60mm -ScaleDRIVE-

1 Cardan Set Scale Drive, adjustable from 46-60mm. For diameters 4mm and 5mm shaft, aluminum shot.

Available immediately, delivery time: 1-4 days

Product number: 9640

€ 37,00 *

Subscriptions

Cardan set1, nickel-plated, 4mm bore on both sides

Cardan set1, nickel-plated, 4mm bore on both sides (length compensation via hexagon) for connecting 6G gearbox with rear axle limited-slip differential, 3mm diameter (10). Hexagonal shaft not included!Joint2017: 6mm long (pitch 1/28mm), 9mm/SW19Joint4: 5mm long (pitch 2/36,5mm), 9mm/SW27,5Replacement item is item no. 4.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 3675

€ 39,87 *

Subscriptions

Double universal joint 10mm diameter, total length

Double universal joint 10mm diameter, total length 41,5mm, bare steel, on both sides bore 5mm H7 threaded pin M3 displaced (Längsausgl.) To 45mm. Also fits between the "old" Wedico metal differentials.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 5154

€ 65,45 *

Subscriptions

Double universal joint 10mm diameter, steel, total length 250mm

Double cardan joint 10mm diameter, steel, total length maximum 250mm, bore on both sides, 1x 5H7/ 1x 6H7 with M3 threaded pin, can be shortened individually. Hexagonal shaft made of brass. Can be shortened to a minimum length of 85mm. Length compensation up to 30mm! Ideal for GM32 gear motors with 6mm shaft and TAMIYA 2/3-axles. Type: double cardan joint with length compensation Diameter: 10mm Minimum length: 85mm by shortening the MS hexagonal shaft Maximum length: 250mm Material of the joints: steel Material of the hexagonal shaft: brass Connection: one side 6mm bore, with M5 threaded pin Connection: 3nd side 2mm bore, with M6 threaded pin

Available immediately, delivery time: 1-4 days

Product number: 9978

€ 63,25 *

Subscriptions

Double universal joint 10mm diameter, steel total length

Double universal joint 10mm diameter, steel, total length maximum 250mm, bore 5mm H7 on both sides with threaded pin M3, MS can be shortened individually. Can be shortened to a minimum length of 85mm. Length compensation up to 30mm!

Available immediately, delivery time: 1-4 days

Product number: 7441

€ 60,10 *

Subscriptions

Set of 2 cardan shafts for loaders 966G 1x Kardan10 41mm

Set of 2 cardan shafts for loaders 966G 1x Kardan10 41mm long 2x4H7 bore 1x Kardan10 max.119mm with stainless steel protection tube 2x4H7 bore. Blank steel.

No longer available

Product number: 5218

€ 95,00 *

Subscriptions

Details

Double universal joint 10mm diameter, steel total length

Double cardan joint 10mm diameter, steel total length maximum 150mm, both sides bore 5mm H7 with threaded pin M3, MS can be individually shortened min. 65mm, 10mm compensation

Available immediately, delivery time: 1-4 days

Product number: 3574

€ 55,10 *

Subscriptions

Kardanset2, nickel-plated, (2018) 4mm hole on both sides

Cardan set 2, nickel-plated, (2018) 4mm bore on both sides, length compensation via hexagon to connect the two limited-slip differentials of the rear axles. Min. length 6mm. Article 42,5, 4191 is available as a replacement article!

Ready to ship in 5 days, delivery time 1-4 days

Product number: 3374

€ 39,95 *

Subscriptions

Double universal joint 10mm diameter, total length 62mm, V

Double universal joint 10mm diameter, total length 62mm, blank VA, bore 5mm H7 on both sides with grub screw M3, adjustable (length compensation) 52-62mm.

Available immediately, delivery time: 1-4 days

Product number: 11950

€ 48,02 * € 49,00 * (2% saved)

Subscriptions

1 double universal joint 10mm diameter, total length

1 double cardan joint 10mm diameter, total length 47mm, bare steel, 5mm H7 bore on both sides with M3 threaded pin length adjustment 47-56mm. Cardan shaft suitable for the Tamiya pendulum (between the drive differentials).

Available immediately, delivery time: 1-4 days

Product number: 6975

€ 57,89 *

Subscriptions

1x double-gimbal 10mm diameter, total length

1x double-gimbal 10mm diameter, total length 55mm, steel blank, 2x bore 5mm H7, with threaded pin M3. Length compensation 55-65mm.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 6649

€ 59,90 *

Subscriptions

1x double-gimbal 10mm diameter, total length

1x double cardan joint 10mm diameter, total length 55mm, bare steel, 1x bore 5mm H7, 1x bore 6H7, each with threaded pin M3, length adjustment 55-65mm.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 8495

€ 59,90 *

Subscriptions

1x cardan shaft for 3:1 axes Scaleart between the

1x propshaft for 3: 1 axes ScaleART between the rear axles. With length compensation 58-70mm. Bore on both sides 4mm.

End of life - article no longer available!

Product number: 8931

€ 57,00 *

Subscriptions

Details

Double universal joint 10mm diameter, total length 50mm, V

Double universal joint 10mm diameter, total length 50mm, blank VA, bore 5mm H7 on both sides with grub screw M3, adjustable (length compensation) 45-50mm.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 11948

€ 48,02 * € 49,00 * (2% saved)

Subscriptions

Double universal joint 10mm diameter, steel total length

Double universal joint 10mm diameter, steel total length maximum 150mm, both sides bore: 5mm H7/6mm H7 cross pin M3, MS, individually shortenable min. 65mm, 10mm compensation

Available immediately, delivery time: 1-4 days

Product number: 7389

€ 57,16 *

Subscriptions

1 double universal joint 10mm diameter, steel total length

1 double universal joint 10mm diameter, steel, total length maximum 180mm, 5mm H7 bore on both sides with M3 threaded pin, MS can be shortened individually. Can be shortened to a minimum length of 85mm. Length compensation up to 30mm!

Available immediately, delivery time: 1-4 days

Product number: 3592

€ 63,30 *

Subscriptions

Double universal joint 10mm diameter, total length

Double cardan joint 10mm diameter, total length 36mm, bare steel, hole on both sides, 1x5mm H7 with threaded pin M3 1x4mm H7 with threaded pin M3. Without length compensation.

Available immediately, delivery time: 1-4 days

Product number: 3432

€ 42,35 *

Subscriptions

1x double-gimbal 10mm diameter, total length

1x double universal joint 10mm diameter, total length 36mm, bare steel, 5mm H7 bore on both sides with M3 threaded pin. Without length compensation. Without length compensation.

Available immediately, delivery time: 1-4 days

Product number: 6912

€ 44,89 *

Subscriptions

Double universal joint 10mm diameter, total length 54mm, V

Double universal joint 10mm diameter, total length 54mm, blank VA, bore 5mm H7 on both sides with grub screw M3, adjustable (length compensation) 48-54mm.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 11949

€ 48,02 * € 49,00 * (2% saved)

Subscriptions

1 double universal joint 10mm diameter, steel total length

1 double universal joint 10mm diameter, steel, total length maximum 180mm, 4mm H7 bore on both sides with M3 threaded pin, MS can be shortened individually. Can be shortened to a minimum length of 85mm. Length compensation up to 30mm!

Available immediately, delivery time: 1-4 days

Product number: 8791

€ 59,75 *

Subscriptions

1x double-gimbal 10mm diameter, total length

1x double-gimbal 10mm diameter, total length 40mm, plain steel, both sides bore 5mm H7 threaded pin M3. Without length compensation.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 2652

€ 46,49 *

Subscriptions

1x double-gimbal 10mm diameter, total length

1x double-gimbal 10mm diameter, total length 41mm, steel blank, 2x bore 4mm H7, with threaded pin M3. Length compensation 41-46mm.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 6940

€ 62,90 *

Subscriptions

Double universal joint 10mm diameter, total length

Double cardan joint 10mm diameter, total length 42mm, bare steel, bore 5mm H7 on both sides with threaded pin M3, movable (longitudinal compensation) up to 50mm. This cardan shaft fits e.g. between 2 differentials (2:1) from RÜST in conjunction with an Oßwald pendulum suspension. Matching cardan shaft for replacing the connection between the two rear axles of the Tamiya pendulum suspension.

Available immediately, delivery time: 1-4 days

Product number: 5734

€ 60,99 *

Subscriptions

Double universal joint 10mm diameter, total length

Double cardan joint 10mm diameter, total length 43mm, bare steel, bore 4mm H7 on both sides with threaded pin M3, movable (longitudinal compensation) up to 50mm, fits between 2 rear WDC differentials. Alternative article made of stainless steel: Article 13238.

Available immediately, delivery time: 1-4 days

Product number: 4191

€ 59,00 *

Subscriptions

Double universal joint 10mm diameter, total length

Double universal joint 10mm diameter, total length 48mm, bare steel, 5mm H7 bore on both sides with M3 threaded pin, adjustable (longitudinal compensation) up to 60mm. 48-60mm. With minimal connection length!

Ready to ship in 5 days, delivery time 1-4 days

Product number: 7387

€ 67,50 *

Subscriptions

Double universal joint 10mm diameter, total length

Double universal joint 10mm diameter, total length 78mm, steel blank, 2x bore 5mm H7, with threaded pin M3 length compensation 78-93mm.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 5705

€ 63,50 *

Subscriptions

Double universal joint 10mm diameter, total length

Double universal joint 10mm diameter, total length 160mm, plain steel, Two-Sided. Bore 5mm H7 threaded pin M3 length compensation 130-160mm.

Available immediately, delivery time: 1-4 days

Product number: 3469

€ 59,69 *

Subscriptions

Double universal joint 10mm diameter, total length

Double cardan joint 10mm diameter, total length 43mm, bare steel, bore on both sides, 1x 4H7, 1x 5H7, with length compensation 43-49mm.

Available immediately, delivery time: 1-4 days

Product number: 5713

€ 57,30 *

Subscriptions

Double universal joint 10mm diameter, total length

Double universal joint 10mm diameter, total length 60mm, steel blank, 1x bore 5mm H7,1x 4H7 threaded pin M3 length compensation 60-75mm.

Available immediately, delivery time: 1-4 days

Product number: 5703

€ 60,99 *

Subscriptions

Cardan set3, nickel-plated, 4mm bore on both sides

Cardan set 3, nickel-plated, 4mm bore on both sides (length adjustment via hexagon), 6-47mm total length. (56). Outside diameter 2019mm. Replacement item is item 10!

Ready to ship in 5 days, delivery time 1-4 days

Product number: 4074

€ 40,59 *

Subscriptions

Double universal joint 10mm diameter, total length

1x double universal joint 10mm diameter, total length 45mm, bare steel, 2x bore 4mm H7, with threaded pin M3. Length adjustment 45-53mm. Alternative article made of stainless steel: Article 13243.

Available immediately, delivery time: 1-4 days

Product number: 5818

€ 60,69 *

Subscriptions

1 double universal joint 10mm diameter, total length 110mm,

1 double universal joint 10mm diameter, total length 110mm, bare steel, bore on both sides, 1x5mm H7, 1x4mm H7 each with threaded pin. Length compensation 110-125mm.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 7295

€ 64,70 *

Subscriptions

Double universal joint 10mm diameter, total length

Double universal joint 10mm diameter, total length 60mm, bare steel, 4mm H7 bore on both sides with M3 threaded pin for length adjustment 50-60mm. Also fits between 2 setup differentials.

Available immediately, delivery time: 1-4 days

Product number: 3601

€ 57,30 *

Subscriptions

Double universal joint 10mm diameter, total length

1x double cardan joint 10mm diameter, total length 43mm, bare steel, bore on both sides, 1x 5H7, 1x 6H7, with length compensation 43-49mm.

Available immediately, delivery time: 1