1 Carson rear tipping semi-trailer in Tamiya scale. COMPLETE SET with TIPPING SPINDLE SET and SUPPORT SET. FLIEGL - Stone Master - round trough. Weight approx. 4600g. Max. load 10kg. COMPLETE SET with tilt spindle, tilt motor, supports and 2 support motors!Kit with assembly instructions.Tailgate with 2-hook locking.Trough and rear wall made of sheet steel, laser-welded.Trough is delivered in steel gray, oxidized (rust protection).Wheel suspension made of GRP with longitudinal control armsAir spring dummies (coil springs)Chassis, milled, laser-welded6 trailer rims, wide, ball bearing!6 wide tires7-chamber tail lights (without bulbs)License plate plate (can be illuminated)Plastic mudguards with holdersAutomatic 2-hook locking tailgateRear underrun protectionTrailer supports, mechanically height-adjustablePlatform aluminum/plasticHydraulic cylinder dummyDimensions: 660x185x235mm Weight 4.600 gr. max. payload 10kg.SPECIAL SALE - limited to stock!Also included in the set:Tilt spindle with motor (item 9043)Support set (incl. 2 motors), item 8890

Bundle article Carson Goldhofer including Pistenking ramp drive Steel frame laser-cut and spot-weldedFoldable and split loading ramps3 axles with twin tires and air spring dummies12 low-loader tires7-chamber taillights (without bulbs)License plate plate (can be illuminated)Plateau with side wallsAluminum underrun protection, milledTrailer supports, mechanically adjustableHydraulic cylinder dummyIllustrated assembly instructionsDimensions: 910/1220x190x142mm Weight approx. 6.000 gr.Additional items are available for this model:- Steering servo installation kit (item 10771)

SET crawler loader kit Liebherr LR634. (Basic model WITH drive units!) Main frame, loading shovel, lifting frame made of steel. Solid Z-kinematics, elastic undercarriage bearing with pendulum movement. Undercarriage with integrated chain tensioner for the guide roller. 2-web chain made of GRP. Support and guide roller made of steel. Driver's cabin and interior fittings, fittings.Controllable functions:(Spindle drives not included in the kit).Forward and reverse travelRotating around the vertical axisRaising and lowering the lifting frameLoading and emptying the bucketTechnical data:Length 530 mmWidth 185 mmHeight 250 mmOwn weight approx. 8,5 kgScope of delivery:As item 5991.plus 1x gear drive set (item 7576).plus 2x travel gear motor (item 7577).SPECIAL OFFER! COMFORT set

Bundle of Carson Goldhofer TU4 including Pistenking ramp drive and lighting board (7-chamber, pair). Bundle article consists of:Article 10831 Carson Goldhofer TU-4 low-loaderArticle 11440 electric ramp drive for TU-4Article 3104 pair of boards for 7-chamber tail lights 7,2V

1 Tamiya Mercedes Benz Actros 1851 GigaSpace 4x2. Kit. Unpainted. Complete package with drive battery, ball bearings, individual license plates and lighting set! Special set! Only while our stocks last! Special package consists of the following items: 7881 (Actros kit from Tamiya) 7446 (ball bearing set for 2-axle tractor) 8196 (battery pack 7,2V/4500mAh with Tamiya plug) 2732 (REFLEX license plate set of your choice) 8038 (1 pair of tail light boards 7,2V for Actros) 8040 (1 pair of headlight boards 7,2V for Actros) 8042 (sidelight set, LEDs for Actros) Only while our stocks last!

SET crawler loader kit Liebherr LR634. (Basic model WITH drive units!) Main frame, loading shovel, lifting frame made of steel. Solid Z-kinematics, elastic undercarriage bearing with pendulum movement. Complete kit with Leimbach hydraulics. Undercarriage with integrated chain tensioner for the guide roller. 2-grouser chain made of GRP. Support and guide roller made of steel. Driver's cabin and interior fittings, fittings.Controllable functions:Forward and reverse travel (electric)Rotating around the vertical axis (electric)Raising and lowering the mast (hydraulic)Loading and emptying the bucket (hydraulic)Technical data:Length 530 mmWidth 185 mmHeight 250 mmOwn weight approx. 8,5 kgScope of delivery:As item 5991 (basic kit).plus 1x gear drive set (item 7576).plus 2x drive gear motor (item 7577).plus 1x complete hydraulic kit for LR634 (7635).plus 2x hydraulic servos S3107, (1708).plus 1x chain regulator M224 (Servonaut).plus 1x 7,2V/5000mAh battery (11235).SPECIAL OFFER! PREMIUM set (hydraulic)

SET crawler loader kit Liebherr LR634. (Basic model WITH drive units!) Main frame, loading shovel, lifting frame made of steel. Solid Z-kinematics, elastic undercarriage bearing with pendulum movement. Undercarriage with integrated chain tensioner for the guide roller. 2-grouser chain made of GRP. Support and guide roller made of steel. Driver's cabin and interior fittings, fittings.Controllable functions:(spindle drives not included in the kit).Forward and reverse travelRotating around the vertical axisRaising and lowering the mastLoading and emptying the bucketTechnical data:Length 530 mmWidth 185 mmHeight 250 mmOwn weight approx. 8,5 kgScope of delivery:As item 5991.plus 1x gear drive set (item 7576).plus 2x drive gear motor (item 7577).plus 1x spindle drive set for mast and bucket (7575) plus 1x motor for mast (4218).plus 1x motor for tilt spindle (7578).plus 1x electronic unit (7742).SPECIAL OFFER! PREMIUM set (electric)

Bundle Arocs rear tipper. Consists of Arocs 3348 and Tamiya rear tipper drive unit. The trough consists of a sturdy ABS part and has a movable and automatically unlocking tailgate. The maximum payload is 10 kg and the trough can be tipped wirelessly using the optionally available ACU-01 spindle drive unit. (Item 10832) The unmistakable design of the new Arocs is as unusual as the truck as a whole. For example, the look specially developed for construction vehicles includes a radiator grille in the so-called excavator tooth look, which is intended to convey the message: -Bite through and grab hold-. To match the robust appearance, special protective grilles for the lighting system are attached to the bumper. With the 576 mm long and around 3,5 kg heavy kit model, impressive trailers can be put together. The tried and tested and robust TAMIYA truck technology can be found under the driver's cab, which can be tilted forwards. A new Mighty-Tuned 35T electric motor delivers its power to the two rear axles via a switchable 3-speed gearbox. A detailed aluminum ladder frame gives the model the necessary stability and flexibility. A special additional frame was installed for the trough, which makes the model particularly stable. A tow bar (e.g. item 7876) can be attached to the rear part of the frame and used to pull trailers. With the optionally available multifunctional unit, almost all of the sound and light functions of the original can be simulated in a deceptively realistic way. Required accessories: - Min. 4-channel remote control e.g. Reflex 14 LCD 500501004 (14-channel LCD display) - 7.2V NiMH battery pack, charger - TAMIYA TS paint for painting - Steering servo + servo for manual transmission - Speed ​​controller or TAMIYA multifunctional unit MFC-03 article 8484 for the driving, light and sound functions Scope of delivery: Kit model with detailed instructions, electric motor, 3-speed manual transmission Technical details: - Kit model in 1:14 scale - Dimensions: length 576 mm, width 190 mm, height 267 mm - Scale 1:14 - True-to-scale ABS body replica of the Arocs 3348, including handrails, steps, side mirrors and much more - One-piece loading tray for max. 10 kg payload - TAMIYA 3-axle chassis with reinforced frame - Tilting spindle unit available separately under article: 10832 - including TR mighty-tuned motor for perfect power delivery to the two driven rear axles- New rear tires, bumper and mudguards- 3-speed manual transmission can be controlled via optional 4-channel remote control- Leaf springs on the axles and rear shock absorbers with coil springs- ACU-01 spindle drive unit for the tipping function-Recommended accessories: MFC-03 multifunctional unit (8484) for the driving, light and sound functions and the operation of the ACU-01 spindle drive unit