2,4GHz receiver with 9 servo channels. RX9. Partner capable. Supports up to 2 multi-switch or multiprop modules. Servo outputs can be switched on/off remotely. Monitoring of driving voltage without accessories. This receiver of the latest generation is the successor to the previous Servonaut receivers R9 and R12 and is of course completely compatible. This receiver can be expanded to 12 or 16 channels and can be linked to TWO HS-12/HS-16 transmitters. This makes it easy to hand over a model. Receiver 55x28x9mm (without antenna). Antenna length 13cm.Note:The multiswitch/multiprop systems from Robbe and Graupner are supported by this receiver.Supply voltage: 4,8 - 7,4VBattery monitoring: for NiCd/NiMH 6 or 10 cells, LiPo/LiFePo 2 to 4 cells.Servonaut receiver of the latest generation (2018).To match this RX9 receiver, inexpensive channel extensions to 12 or 16 channels are offered.Extension by 3 channels (so 12 channels in total): article 11137Extension by 7 channels (so 16 channels in total): article 11138Extended settings possible via CARD (article 9096) or the HS-12 and HS-16 transmitters.

Channel extension R+3 for 3 servo channels. This module extends the RX9 receiver to 12 channels. This receiver extension of the latest generation is the successor to the previous Servonaut receivers R9 and R12 and is of course fully compatible.Extension module: 46x19x9mmServos are also supplied by the RX9.The soldered 15cm connection cable allows flexible positioning of the module.Planned delivery time for this article: end of August 2018.Suitable for the RX9 receiver (article 11136)

Channel extension R+7 for 7 servo channels. This module extends the RX9 receiver to 16 channels. This receiver extension of the latest generation is the successor to the previous Servonaut receivers R9 and R12 and is of course fully compatible.Extension module: 52x19x9mmSeparate BEC supply for the additional 7 channels required.The connection cable to the RX9 allows flexible positioning of the module.Planned delivery time for this article: end of August 2018.Suitable for the RX9 receiver (article 11136)

2,4GHz receiver with 6 servo channels. Supports model shutdown and telemetry. Servo outputs can be switched on/off remotely. ZWO4-R6. Receiver 54x19x10mm (without antenna). Antenna 13cm. 2.4 GHz receiver with 6 servo channels Monitoring of the drive battery voltage is possible without additional accessories (telemetry). Supply voltage: 4,8 to 7,4 V Battery monitoring: for NiCd / NiMH 6 or 10 cells, LiPo / LiFePo 2 to 4 cells Can be set via CARD: channel shift when used as a secondary receiver Note: The multi-channel / multiswitch / multiprop systems are not supported by this receiver Dimensions: Receiver 54 x 19 x 10 mm, antenna length 13 cm

2,4 GHz receiver with 4 servo channels. Supports model shutdown and telemetry. Servo outputs can be switched on/off remotely. ZWO4-R4. Receiver 49x19x10mm (without antenna). Antenna 14cm. 2.4 GHz receiver with 4 servo channels. Monitoring of the drive battery voltage is possible without additional accessories (telemetry). Supply voltage: 4,8 to 7,4 V Battery monitoring: for NiCd / NiMH 6 or 10 cells, LiPo / LiFePo 2 to 4 cells Can be set via CARD: Channel shift when used as a secondary receiver. Note: The multi-channel / multi-switch / multi-prop systems are not supported by this receiver. Dimensions: receiver 49 x 19 x 10 mm, antenna length 14 cm.

Servonaut bind button for the Servonaut receivers RX9, R4, R6. Bind button for the receivers RX9, R6, R4Replaces the "Bind" jumper on the receiverAllows convenient binding of the receiver even when installedWith fastening nut, cable length 13cm

Electronic on/off switch for remotely switching the model on/off via a Zwo4 receiver. Switching capacity 40A max. 7,2-14,4V. AN40 Instructions are available for downloading for this article. Downloading is free! (except for your online costs).

2,4GHz receiver with 12 servo channels. RM12. Supports up to 2 multi-switch or multiprop modules. Servo outputs can be switched on/off remotely. Monitoring of drive voltage without accessories. This receiver can be expanded to 16 channels and can be linked to TWO HS-12/HS-16 transmitters. This makes it easy to hand over a model. Receiver 35x28x12,5mm (without antenna). Antenna length 13cm.Note:The multiswitch/multiprop systems from Robbe and Graupner are supported by this receiver.Supply voltage: 4,8 - 7,4VBattery monitoring: for NiCd/NiMH 6 or 10 cells, LiPo/LiFePo 2 to 4 cells.Servonaut receiver of the latest generation (2024).To match this RM12 receiver, there will be an inexpensive channel extension of 4 channels.Extended settings possible via the HS-12 and HS-16 transmitters. Description2.4 GHz receiver with 12 servo channels.Monitoring of the drive battery voltage is possible without additional accessories (telemetry).Supply voltage: 4,8 to 7,4 VBattery monitoring: for NiCd / NiMH 6 or 10 cells, Lipo / LiFePo 2 to 4 cellsSupports up to two multi-channel/multiswitch/multiprop/nauticalOperation with two transmitters alternately possible (double binding)Diagnostic LEDs for each individual channelExtended settings via HS12/HS16 transmitterChannels can be switched off individually with a time setting, e.g. for hydraulic valvesExpandable to 16 channels with the R+4 moduleDimensions: receiver 35 x28 x 12,5(10) mm³, antenna length 13 cm

Channel extension R+4 for 4 servo channels. This module extends the RM12 receiver to 16 channels. This receiver extension extends the RM12 receiver to 16 channels.Extension module: 37x17x14mmModule is supplied by the RM12.The 15cm connection cable allows flexible positioning of the module.With diagnostic/status LEDs for each outputOutputs can be switched off at a timeFor many or powerful servos on the R+4, an additional BEC is recommendedSuitable for the RM12 receiver (item 13234)

Front panel in silver for Zwo4F robbe/ Futaba modules. Zwo4FPS

2,4GHz receiver with separate 18-channel decoder. Supports up to 2 multi-switch or multiprop modules. Servo outputs can be switched on/off remotely. Level switching for 6 channels. This means that up to 15 channels can be used with Robbe/Futaba systems and up to 18 channels with Graupner/JR systems (with PPM24 modulation). Receiver 45x25x12mm (without antenna). Decoder 58x35x15mm. Instructions are available for downloading this item. Downloading is free! (except for your online costs).