Chargers

1 BID chip (Battery-ID) for storing

1 BID chip (battery identification) For storing battery data and parameters. 1 BID chip WITH 30cm cable. (4-pin) Safe and easy operation as well as automatic storage of the most important battery data in the robbe BID system. Simply connect the BID chip to the charger and start the charging process. The BID chip automatically makes all necessary settings on the charger. The BID chip prevents incorrect settings on the charger, which could damage the battery. The BID chip is so small and light (0,5 grams) that it can be attached to the battery can be attached or shrunk in. There are plug-in connections on both sides of the chip, which enable easy handling and save cable weight. The following data is stored in the chip: (charging settings) Battery type Number of cells Battery capacity Charging current Discharging current Date (initial commissioning) Delta peak Switch-off voltage Switch-off temperature (per charging process) :current loaded capacitycurrent discharged capacitymaximum charged capacitymaximum discharged capacityNumber of charging cycles

Available immediately, delivery time: 1-4 days

Product number: 8050

€ 16,49 * € 16,50 * (0.06% saved)

Subscriptions

1 BID chip (Battery-ID) for storing

1 BID chip (battery identification) For storing battery data and parameters. Safe and easy operation as well as automatic storage of the most important battery data in the BID system. Simply connect the BID chip to the charger and start the charging process. The BID chip automatically makes all necessary settings on the charger. The BID chip prevents incorrect settings on the charger, which could damage the battery. The BID chip is so small and light (0,5 grams) that it can be attached to the battery can be attached or shrunk in. There are plug-in connections on both sides of the chip, which enable easy handling and save cable weight. The following data is stored in the chip: (charging settings) Battery type Number of cells Battery capacity Charging current Discharging current Date (initial commissioning) Delta peak Switch-off voltage Switch-off temperature (per charging process) :current loaded capacitycurrent discharged capacitymaximum charged capacitymaximum discharged capacityNumber of charging cycles

No longer available

Product number: 8049

€ 7,60 * € 7,78 * (2.31% saved)

Subscriptions

Details

Carson Battery Charger Set 4 A

Battery charging set 4 A This set consists of a 230 V charger with 4 A charging current and automatic charging cut-off (Delta Peak) as well as a racing pack with 7,2 V/ 3000 mAh NiMH and 4 Mignon batteries for the transmitter.Scope of delivery: - 230 V charger with 4 A charging current.- automatic charging cut-off (Delta Peak)- racing pack with 7,2 V/ 3000 mAh NiMH- 4 Mignon batteries for the transmitter.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 10749

€ 64,99 * € 76,99 * (15.59% saved)

Subscriptions

Multifunction charger e680 AC / DC. Compact loading / unloading

Multifunctional charger e680 AC/DC. Compact microprocessor-controlled quick charge/discharge device with balance function. For 12V or mains operation. Universal charger e680 for 12V or mains operationCompact microprocessor-controlled quick charge/discharge device with balance function and built-in power supply. For mobile use, the device can be operated on a 12V car battery or other direct current power source with a voltage between 11 and 18V. The improved version of the e660 charger, the SkyRC e680 is suitable for all common battery types: LiPo, Li-ion, LiFe, NiCd, NiMH, PB and also the new generation LiHV with final voltage 4,35V. Increased maximum charging power of 80W and 8A charging current. The discharge power has also been doubled. In particular, the e680 charger supports charging DJI Mavic batteries with a maximum charging current of 4 A. When operated from the mains, the DC socket can supply power with a voltage of 13,8 V and a maximum output of 80 W. This makes the SkyRC e680 a power supply unit that can be used to operate many devices with a nominal voltage of 12V, such as workstation lighting, mobile chargers, soldering irons or fans.Other featuresBattery voltage meterBattery resistance meterCharge LiHV batteriesCharge DJI Mavic batteries (charging current 4A with optional charging cable)AGM & cold charge mode (charge AGM batteries even at low temperatures)Built-in high-speed fanSuitable for the following battery types/sizesLiPo batteryLiHV batteryLiFe batteryLiIon battery 1 - 6 cellsNiMH batteryNiCd batteries 1 - 16 cellsPB (lead batteries) 2-20 volts (1 - 10 cells)Features:- Illuminated display- Automatic cell detection- Built-in balancer- Delta peak shutdown- Quick charge and trickle charge- Automatic charge limit setting- Cyclic charge/discharge program repetition- Input voltage monitoring- Adjustable safety timer for NiMH / NiCd Batteries - Individually programmable charging/discharging processes for 10 different battery types - Thermal monitoring of the battery to be charged via optional temperature sensor Scope of delivery: Charger e680Connection cable 12V + power cable EUXH balancer adapter board for 2 - 6 cellsInstructions and charging cable with XT-60 plugTechnical dataAC input voltage 100-240 voltsDC input voltage 11-18 voltsCharging power max. 80 WDischarging power max. 10 WAdjustable charging current 0,1-8,0 AAdjustable discharging current 0,1-2,0 ADC output (direct current): 1,8 volts / 80 WWeight 390 gDimensions 135x110x60 mm

Available immediately, delivery time: 1-4 days

Product number: 12167

€ 59,94 *

Subscriptions

1 charger Expert Charger XBase 2.0se. Max. 4A

1 charger Expert Charger XBase 2.0se. Max. 4A. 12V power supply integrated. Fast charging capability 0,1-4,0A. 1 output. Illuminated LCD display. Up to 10 NiMh/NiCd cells. Input voltage 12V (via battery) or via mains voltage 230V. Charging current 0,1A - 4ABalance current approx. 150mA (XHP connector)User-friendly, microprocessor-controlled charger for home and on the go. Programming via blue illuminated display. Delta peak for monitoring or automatically ending the charge. 1 charging output and balancer connection for charging all common battery types.Scope of delivery:1 charger EXPERT Carger xbase 2.0se1x 12V power supply1x balancer adapter XHP1x charging cable T-plug1x 12V connection cableManualTechnical data:Input voltage: 230V or 11-18VCharging current: 0,1 - 4ABattery types: 1-4 cells Li-XX and 1-10 cells NiMh, NiCd, lead batteries 1-6 cells.Integrated balancer + XHP adapterDelta peak shutdownWeight: approx. 175gr.Size: approx. 116 x 75 x 25mm

No longer available

Product number: 8512

€ 50,99 * € 57,99 * (12.07% saved)

Subscriptions

Details

BID key (battery identification) For storing

1 BID key (battery identification) for storing battery data and parameters. BID system = battery identification system. Safe and easy operation and automatic storage of the most important battery data in the BID system. Simply connect the BID key to the charger and start the charging process. The BID key automatically makes all the necessary settings on the charger. The BID key prevents incorrect settings on the charger, which could damage the battery. The BID key is so small and light (4,5 g) that it can be attached to the battery. The key has plug connections that make it easy to use and save cable weight. The following data is stored in the BID key: (Charging settings) Battery type Number of cells Battery capacity Charging current Discharge current Date (first use) Delta peak cut-off voltage Cut-off temperature (per charging process): Current charged capacity Current discharged capacity Maximum charged capacity Maximum discharged capacity Number of charging cycles

Available immediately, delivery time: 1-4 days

Product number: 11457

€ 5,95 * € 6,30 * (5.56% saved)

Subscriptions

1 BID cable (battery identification) 50cm cable (4-pole)

1 BID cable (battery identification) 50cm cable (4-pin) on both sides with BID-plugs. WITHOUT BID chip!

No longer available

Product number: 8051

€ 5,55 * € 5,90 * (5.93% saved)

Subscriptions

Details

Charger Expert Charger NiMH 1Ah. Plug-in charger for

1 Charger Expert Charger NiMH 1Ah. Plug-in charger for 6-cell NiMH battery packs. Charging current 1000 mA / 8,4V. Input voltage: 100-240V. Automatic shutdown after loading.

Available immediately, delivery time: 1-4 days

Product number: 11372

€ 19,99 *

Subscriptions

Equalizer adapter JST, multiplex. balancer connection

Equalizer adapter JST, Multiplex. Balancer connection to charger: EH. Adapter and adapter cable. **SOLD OUT!

End of life - article no longer available!

Product number: 12417

€ 4,20 * € 4,40 * (4.55% saved)

Subscriptions

Details

Charger Expert Charger NiMH 500 mAh. Steckerladegerät

1 Charger Expert Charger NiMH 500 mAh. Plug-in charger for 6-cell NiMH battery packs. Charging current 500 mA / 8,4V. Input voltage: 100-240V. Automatic shutdown after loading.

Available immediately, delivery time: 1-4 days

Product number: 11371

€ 15,99 *

Subscriptions

Power Peak D7 charging station. 2-times charge / discharge device

1 POWER-PEAK D7 charger (multiplex). Powerful 2-way home charging station with battery management and integrated power supply. With 2 integrated equalizers and BID system. Both outputs can be used completely independently of each other! 2-way charger with power supply, 12V (DC) and 220V (AC) input. BID chip function! (Battery Identification System) Maximum power 2x 20A simultaneously! Processor-controlled high-performance charging/discharging station, with management functions for all common battery types. With integrated equalizers for 1 to 7 cell Li-Po/Li-Ion/Li-Fe batteries.Features:for Li-Po, Li-Fe, Li-Ion, NiCD, NiMh, Pb batteriesCharging/dischargingBalancer (LiXX)Battery voltage display (LiXX)Safety functionsMax. number of cells: Li-Po/Li-Fe: 1-6 cells, NiCd/NiMh: 1-18 cells, Pb: 2-24VInput voltage AC: 110-240V, DC:10,5-18VCharging/discharging currents: 0,1-20A (per output)Dimensions/weight: 270x200x85mm / 2,6kgOf course, batteries with and without a BID chip can be charged! Set contents:Charger, power cable, crocodile clips, BID key, instructions.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9701

€ 320,00 * € 349,00 * (8.31% saved)

Subscriptions

Carson Expert Charger NiMH Compact 1A

Expert Charger NiMH Compact 1A especially for cars, boats & remote controls.Technical data:Charger- Input voltage: 100-240 V, 50/60 Hz (AC)- Charging current 1000 mA / 8,4 V- Battery types: 6-cell 7,2 V NiMH drive battery- NiMH 7,2 V / 2100 mAh TAMIYA plug transmitter batteries- AA Mignon 1,5 V Scope of delivery:- Plug-in charger, 7,2 V / 2100 mAh NiMH drive battery- 4x AA Mignon batteries, manualTechnical details:- Automatic switch-off after charging- Suitable for NiMH 6-cell batteries with 7,2 V TAMIYA plug

No longer available

Product number: 10751

€ 35,09 * € 39,99 * (12.25% saved)

Subscriptions

Details

POWER-PEAK C8 charger (multiplex). Computer-charging station

1 POWER-PEAK C8 charger (Multiplex). Powerful computer charging station with battery management and integrated power supply unit. With integrated equalizer and BID system. 12V / 230V charger with max. 10A.High-performance computer charging/discharging station with battery management.BID system display of capacity, voltage, equalizer single cell voltage, charging time, battery storage (BID), battery type, etc.Optional automatic or manual charging/discharging, BID system, display of: charged and discharged capacity, input and charging voltage, equalizer single cell voltage.Battery types: LiPo, Lilon, LiFe, NiMh, NiCd, lead batteryNumber of cells: LiXX: 1-8, NiXX: 1-21, Pb/lead: 1-8Input voltage: 10-15V DC or 230V ACCharging current: up to 10ADischarge power: up to 35WEqualizer current: 250mABID chip system: yesDimensions: 145 x 180 x 70mmWeight: 750gr.Scope of delivery:Charger, power cable, connection cable 12V DC, equalizer adapter JST/XH, 2 crocodile clips (red/black), BID key.Every battery pack to be charged can be equipped with the BID system. The following BID items are available for this (not included): BID key, item 11457 BID chip, items 8049, 8050 BID cable, item 8051 (not required for BID key)

No longer available

Product number: 11456

€ 116,85 * € 124,90 * (6.45% saved)

Subscriptions

Details

Expert Charger Car & Radio Set. charging set

Expert Charger Car & Radio Set. Charging set. Contains: 1x charger for 6-cell NiMh batteries with 2A charging current. 1 battery 7,2V/3000 mAh. 4x AA NiMh battery cells 2100mAh. Charging cradle.Especially for cars, boats & remote controls.Technical data:Charger- Input voltage: 100-240 V, 50/60 Hz (AC)- Charging current output 1: 2000 mA- Charging current output 2: 500mA- Battery types: 6-cell 7,2 V NiMH drive battery- NiMH 7,2 V / 3000 mAh TAMIYA plug transmitter batteries- 4x AA Mignon NiMh 1,2 V / 210mAh Scope of delivery:- Car & Radio charger- 1x drive battery 7,2V / 3000mAh- 4x AA Mignon batteries, manualTechnical details:- Automatic switch-off after charging (both outputs)- Suitable for NiMH 6-cell batteries with 7,2 V TAMIYA plug

End of life - article no longer available!

Product number: 12456

€ 66,60 * € 70,99 * (6.18% saved)

Subscriptions

Details

Charger T-150 Touch 150W 230V AC/12V DC

T-150 Touch Charger 150W 230V AC/12V DC. thicon-models The new thicon-models T-150 charger is ideal for all types of truck and construction equipment batteries! Are you looking for an easy-to-use charger? Then you'll appreciate the T-150! Input is simple, fast, and intuitive via the large 3,2-inch touchscreen. All types of batteries, including lead, LiPo, NiMH, LiFe, and NiCd, can be charged. Furthermore, a mobile phone or the FlySky Paladin PL2,1EV can be charged directly via the integrated USB charging output with up to 18A charging current. The compact T-150 can be operated via 230V AC or 12V DC, enabling mobile use at events, for example. Batteries can be treated in different modes depending on their type, including storage charging. There's even a smart charging mode. Here, the battery is automatically detected and charged. For example, LiPo batteries can be either: charged, discharged, conditioned, quickly charged, or balanced (XH). During the charging process, the current/voltage charging curve or the individual cell voltages can be displayed. Everything is simple and clear. Technical data: Input voltage: AC 100-240V / DC 11-18V Charging power: max. 100W Discharge power: max. 10W Charging current: 0,1-10A Discharge current: 0,1-2A Balance current: 500mA/cell LiPo, LiFr, LiIo, LiHV: 1-6s cells NiCd, NiMH: 1-15 cells Pb: 2-20V (1-10 cells) Battery storage: 6 storage locations USB charging port: 5V/2,1A max. (depending on device, battery level and charging cable) Weight: 473g Scope of delivery: 1x charger, 1x EU power cable, 1x XT60 12V terminal feed, 1x T-connector charging cable, 1x XT60 charging cable, 1x TAM charging cable. NOTE: For chargers of the very latest production from December 12.2024 onwards, the balancer adapter board is no longer included because all XH types can now be easily connected directly to the charger!

Available immediately, delivery time: 1-4 days

Product number: 13122

€ 95,90 * € 99,95 * (4.05% saved)

Subscriptions

Charger POWER PEAK B6 EQ-BID, Multiplex. Compact Statio

1 charger POWER PEAK B6 EQ-BID. Compact, inexpensive charging/discharging station with 12V and 230V connection. 12V / 230V charger with max. 5A.Compact and inexpensive charging/discharging station with battery management.BID system display of capacity, voltage, equalizer single cell voltage Optional automatic or manual charging/discharging, BID system, display of: charged and discharged capacity, input and charging voltage, equalizer single cell voltage.Battery types: LiPo, Lilon, LiFe, LiHV, NiMh, NiCd, lead batteryNumber of cells: LiXX: 1-6, NiXX: 1-14, Pb/lead: 1-6Input voltage: 10-15V DC or 230V ACCharging current: 0,1 - 5ADischarging current: 0,1 - 10A (max. 5W)Equalizer current: 300mADimensions: 142 x 89 x 25mmWeight: 230gr.Scope of delivery: charger, power cable, connection cable 12V DC, switching power supply 230V -5A, temperature sensor, BID chip, USB cable, balance adapter 2-6S (TP/JST/XH), universal charging cable with crocodile clips, receiver and transmitter charging cable Futaba.

No longer available

Product number: 7733

€ 99,00 * € 109,90 * (9.92% saved)

Subscriptions

Details

1 switching power supply SPS-9400. 3-15V/40A. Strong switching network

1 switching power supply SPS-9400. 3-15V/40A. Powerful switching power supply with digital display for current and voltage values. Input: 230V/AC. Output power: 600W Weight 3,5kgDimensions: 300x220x110mmmax. Load current 40A.Output voltage: 3-15V continuously adjustable.Switchable to 13,8V constant voltage operation.An ideal home power supply for stationary operation of 12V chargers in the model workshop.Operating voltage: 230V AC/50HzOutput voltage: 3-15V DC adjustable or 13,8V fixed voltageOutput current: max. 40AShort-term output current: 43AResidual ripple and noise: <50mVDisplays / measuring devices: LED 3-digit digital multimeter for voltage and current, 2-color status LED (red=fault/green=operation)Cooling: fanSafety: Protection against overload and overheating, short circuit and reverse polarity protection, output voltage protection at 16,5VDark gray metal housing with rubber feet.High efficiency:> 78%.The device is available as a single device NOT suitable as a charger!

Ready to ship in 15 days, delivery time 1-4 days

Product number: 9025

€ 228,99 * € 239,00 * (4.19% saved)

Subscriptions

1 PowerBox (Hitec). ePowerBox 17A

1 PowerBox (Hitec). ePowerBox 17A. Power supply with 17A Power supply specially adapted to the X1 Pro charger, but which can also be used as a compact power supply for other chargers worldwide.Features:- LED indicator- Powerful fan- Input voltage 100-240V for worldwide use- Active power factor correction filter for safe operation- Two outputs/top and side- With on/off switch- USB socket for mobile devicesFunctions:- regulated fan- Input voltage AC: 100 - 240 Volt- Output voltage: 13,8 Volt DC +/-0,2V- Output current: 17 A + /-0,5 A- USB output: 5 V 2,1 ADelivery contentsPower supply ePOWER BOX 17A, power cable 230 VTechnical dataWidth: 126 mmHeight: 51 mmLength: 92 mmWeight: 0.602 KgInput voltage: AC 100-240 VPower in watts: 330BID chip system: No

No longer available

Product number: 10218

€ 84,49 * € 99,90 * (15.43% saved)

Subscriptions

Details

Switching power supply DM-30-E. 9-15V/25A DC. Strong switching power supply

Switching power supply DM-30-E. 9-15V/25A DC. Powerful switching power supply with digital display for current and voltage values. Input: 230V/AC. Weight 1,5kgDimensions: 205x155x75mmmax. Load current 25A.Output voltage: 9-15V continuously adjustable.Switchable to 13,8V constant voltage operation.An ideal home power supply for stationary operation of 12V chargers in the model workshop.Operating voltage: 230V AC/50HzOutput voltage: 9-15V DC adjustable or 13,8V fixed voltageOutput current: max. 25AShort-term output current: 30AResidual ripple and noise: <80mVDisplays/measuring devices: LED 3-digit digital multimeter for voltage and currentCooling: temperature-controlled fanSafety: Protection against overload and short circuitDark gray metal housing with rubber feet.The device is NOT suitable as a charger as a stand-alone device!

No longer available

Product number: 10495

€ 114,95 * € 119,00 * (3.4% saved)

Subscriptions

Details

Switching power supply SPS-9250. 3-15V/25A. Powerful switching power supply

1 SPS-9250 switching power supply. 3-15V/25A. Powerful switching power supply with digital display for current and voltage values. Input: 230V/AC. Output power: 380W. Weight: 2,7kg. Dimensions: 220x220x110mm. Maximum load current: 25A. Output voltage: 3-15V continuously adjustable. Switchable to 13,8V constant voltage operation. An ideal home power supply for stationary operation of 12V chargers in the model workshop. Operating voltage: 230V AC/50Hz. Output voltage: 3-15V DC adjustable or 13,8V fixed voltage. Output current: max. 25A. Short-term output current: 28A. Ripple and noise: 78%. This device is NOT suitable as a standalone charger!

Available immediately, delivery time: 1-4 days

Product number: 12252

€ 186,79 * € 198,00 * (5.66% saved)

Subscriptions

BID cable (battery identification) 30cm cable (4-pin)

1 BID cable (battery identification) 30cm cable (4-pin) on both sides with BID-plugs. WITHOUT BID chip!

Available immediately, delivery time: 1-4 days

Product number: 12612

€ 10,98 * € 11,50 * (4.52% saved)

Subscriptions

Dual charger TLG-200 100W 230V AC/12V DC

Dual charger TLG-200 100W 230V AC/12V DC. Wedico. The new Wedico TLG-200 charger is especially suitable for all types of truck and construction equipment batteries! Are you looking for an easy-to-use charger? Then you'll appreciate the TLG-200! The large color LCD screen displays the charging/discharging parameters simply and clearly. All types of batteries, such as lead-acid, LiPo, NiMH, LiFePO4, Li-ion, LiHV, or NiCd, can be charged/discharged. The compact TLG-200 can be operated via 230V AC or 12V DC, making it suitable for mobile use at events, for example. Batteries can be processed in different modes depending on their type. For example, LiPo batteries can be: charged, discharged, conditioned, fast charged, or balanced (XH). The individual cell voltages can be displayed during the charging process. Technical specifications: Input voltage: AC 100-240V / DC 11-18V; Charging power: max. 100W (AC) / 200W (DC); Discharging power: max. 10W; Charging current: 0,1-10A; Discharging current: 0,1-5A; Balancing current: 500mA/cell; LiPo, LiFr, LiIo, LiHV: 1-6s cells; NiCd, NiMH: 1-16 cells; Pb: 2-20V (1-12 cells); Weight: 440g. Scope of delivery: 1x charger, 1x EU power cable, 1x XT60 input for power supply.

Available immediately, delivery time: 1-4 days

Product number: 13547

€ 161,95 * € 169,95 * (4.71% saved)

Subscriptions

HRC9361D dual charger, 2 x 120W, 230V AC/12V DC. With mains connection

HRC9361D Dual Charger, 2 x 120W, 230V AC/12V DC. Includes mains cable, DC cable, and balancer adapter board. The new HRC9361D dual charger is especially suitable for all types of truck and construction equipment batteries! Looking for an easy-to-use charger? Then you'll appreciate the HRC9361D! Two LCD displays provide a clear and simple overview of the charging/discharging parameters for each output. All types of batteries, such as lead-acid, LiPo, NiMH, LiFePO4, Li-ion, LiHV, and NiCd, can be charged and discharged. The compact HRC9361D can be operated via 230V AC or 12V DC, making it ideal for mobile use at events, for example. Thanks to intelligent power distribution, the two powerful XT60 outputs deliver up to 150W per channel. Batteries can be processed in different modes depending on their type. For example, LiPo batteries can be: charged, discharged, cycled (charge/discharge), fast charged, or balanced (XH). The essential parameters are displayed during the charging process. Technical data: Input voltage: AC 100-240V / DC 11-18V; Charging power: max. 150W (AC) / 240W (DC); Discharging power: max. 10W; Charging current: 0,1-10A adjustable; Discharging current: 0,1-2A; Balancing current: 400mA/cell; LiPo, LiFr, LiIo, LiHV: 1-6s cells; NiCd, NiMH: 1-15 cells; Pb: 2-20V; Memory locations: 20; Intelligent power control; Multiple protection system; Power switch; Super quiet fan; Dimensions: 145 x 105 x 64mm; Weight: 590g; Menu languages: German, English French selectable. The integrated multi-protection system continuously monitors the parameters: voltage, capacity, time, temperature, peak current. Scope of delivery: 1x charger, 1x EU power cable, 1x XT60 input for power supply, 2x balancer adapter boards, 2x multi-charging cables XT60 to T-plug/EC5/XT90.

Available immediately, delivery time: 1-4 days

Product number: 13556

€ 88,99 *

Subscriptions

Universal fast charger APC-1. 230V AC/11-18V DC. With

Universal Fast Charger APC-1. 230V AC/11-18V DC. Includes AC power cable, DC power cable, balancer adapter, and T-plug charging cable. A small, powerful all-rounder. Top Features: Charging current 0.1 A - 10.0 A, Charging power 80 watts, Integrated power supply AC 100 - 240 V / DC 11.0 - 18.0 V. Description: Professional and efficient charging technology in a compact design. The APC-1 offers everything a modern, efficient, and powerful charger should have. Features: Computer-controlled universal fast charger; Charging current 0.1 - 10.0A; Discharging current 0.1 - 2.0A; Operating voltage AC 100 - 240V DC 11.0 - 18.0V; Charging types: LiPo & LiFe batteries 1 to 6 cells (3.7V - 22.2V) / NiMH batteries 1 to 15 cells (1.2V - 18V) / Lead-acid batteries 2 - 24V; Charging power 80W; Discharging power 5WXH; Balancer connection via balancing board (1-6 cells); Integrated power supply; Charging connector system: Banana plugs; Safe charging control via dot matrix display; Delta-peak safety cutoff; Very easy button operation. Technical data: Dimensions (L/W/H) = 130 mm x 115 mm x 61 mm, Weight 380 g. Scope of delivery: 1 pc. APC-1 charger, power cord, charging cable for T-plug system, balancer board, DC connection cable with alligator clips, detailed operating instructions

Available immediately, delivery time: 1-4 days

Product number: 13559

€ 54,94 *

Subscriptions

Filter Products