1 BID chip (battery identification) For storing battery data and parameters. 1 BID chip WITH 30cm cable. (4-pin) Safe and easy operation as well as automatic storage of the most important battery data in the robbe BID system. Simply connect the BID chip to the charger and start the charging process. The BID chip automatically makes all necessary settings on the charger. The BID chip prevents incorrect settings on the charger, which could damage the battery. The BID chip is so small and light (0,5 grams) that it can be attached to the battery can be attached or shrunk in. There are plug-in connections on both sides of the chip, which enable easy handling and save cable weight. The following data is stored in the chip: (charging settings) Battery type Number of cells Battery capacity Charging current Discharging current Date (initial commissioning) Delta peak Switch-off voltage Switch-off temperature (per charging process) :current loaded capacitycurrent discharged capacitymaximum charged capacitymaximum discharged capacityNumber of charging cycles
1 BID chip (battery identification) For storing battery data and parameters. Safe and easy operation as well as automatic storage of the most important battery data in the BID system. Simply connect the BID chip to the charger and start the charging process. The BID chip automatically makes all necessary settings on the charger. The BID chip prevents incorrect settings on the charger, which could damage the battery. The BID chip is so small and light (0,5 grams) that it can be attached to the battery can be attached or shrunk in. There are plug-in connections on both sides of the chip, which enable easy handling and save cable weight. The following data is stored in the chip: (charging settings) Battery type Number of cells Battery capacity Charging current Discharging current Date (initial commissioning) Delta peak Switch-off voltage Switch-off temperature (per charging process) :current loaded capacitycurrent discharged capacitymaximum charged capacitymaximum discharged capacityNumber of charging cycles
1 charger Expert Charger XBase 2.0se. Max. 4A. 12V power supply integrated. Fast charging capability 0,1-4,0A. 1 output. Illuminated LCD display. Up to 10 NiMh/NiCd cells. Input voltage 12V (via battery) or via mains voltage 230V. Charging current 0,1A - 4ABalance current approx. 150mA (XHP connector)User-friendly, microprocessor-controlled charger for home and on the go. Programming via blue illuminated display. Delta peak for monitoring or automatically ending the charge. 1 charging output and balancer connection for charging all common battery types.Scope of delivery:1 charger EXPERT Carger xbase 2.0se1x 12V power supply1x balancer adapter XHP1x charging cable T-plug1x 12V connection cableManualTechnical data:Input voltage: 230V or 11-18VCharging current: 0,1 - 4ABattery types: 1-4 cells Li-XX and 1-10 cells NiMh, NiCd, lead batteries 1-6 cells.Integrated balancer + XHP adapterDelta peak shutdownWeight: approx. 175gr.Size: approx. 116 x 75 x 25mm
1 charger Power Peak Uni7 EQ, 230V. (308564). With 7 charging outputs that can all be used simultaneously. Total charging current max. 3,6A. The charging outputs are divided according to battery type: 2 outputs with CC-CV shutdown for LiPo/LiFe batteries with integrated balancer. 4 constant current outputs for NiCd/NiMH batteries, one of which has a delta peak shutdown. Output 7 is also equipped with a CC-CV shutdown and is set for the voltage level of lead batteries. - Short circuit protection - Reverse polarity protection - Protection against incorrect connection Output 1: 1000mA 1-4S LiPo/LiFe cells with CC-CV shutdown and equalizer. Output 2: 500mA 1-4S LiPo/LiFe cells with CC-CV shutdown and equalizer. Output 3: 1000mA 4-8 NiCd/NiMH cells with delta peak shutdown. Output 4: 250mA 4-8 NiCd/NiMH cells. Output 5: 250mA 4-8 NiCd/NiMH cells. Output 6: 120mA 4-8 NiCd/NiMH cells. Output 7: 500mA for 1,3, 6 or 150 cell lead battery with CC-CV shutdown. Technical data: Dimensions: 130x80x560mm Weight: XNUMXg.
1 charger Expert Charger Duo 12V/230V. Max. 10A. 12V power supply integrated. 2 charging outputs that can be used at the same time. Large illuminated LCD display. Input voltage 12V (via battery) or via mains voltage 230V. Charging current 0,1A - 10A (output 1), 0,1A - 5A (output 2)Discharge current 0,1A - 10A (only output 1)Balance current approx. 150mA (XHP connector)User-friendly, microprocessor-controlled 2-fold Charger for at home and on the go. Programming via blue illuminated display. Delta peak for monitoring or automatically terminating the charge. 2 charging outputs and 2 balancer connections for charging all common battery types at the same time.User-friendly dual charger for at home and on the go.With charging output 1, batteries can be discharged/charged or charged/discharged with up to three cycles. These always ensure a fresh battery.The charging output 2 is intended for pure charging processes.The charging is monitored and automatically ended using delta peak.The following battery types can be charged with the Carson Expert Charger Duo:- NiCd/NiMH- Li-Po- Li -Fe- Li-Ion- PbUsing the display, the charging process can be optimally monitored and the following values can be called up or set: battery type / cell, state of charge, voltage, ampere, time, input voltage, peak value, average value and capacity.Technical details:Input voltage: using Battery/power supply 11V-15V via mains 110V-230V (50/60Hz) Charging power: 70W (if only charging output A is used / 2x 35W (if both charging outputs are used at the same time) Discharging power: 5W (only charging output A) Charging current: 0.1A – 10A (charging output A), 0.1A-5A (charging output B) Discharge current: 0.1A - 10A (only charging output A) Balance current: approx. 150mA (XHR connector) Trickle charge: approx. 80mA (only for NiCd/NiMH batteries) - NiCd /NiMH (1.2V) (1 - 15 cells) - Li-Po (3.7V) (1 - 6 cells) - Li-Fe (3.3V) (1 - 6 cells) - Li-Ion (3.6V) (1 - 6 cells)-Pb (2V - 24V) (1-12 cells) End-of-discharge voltages:- 0.8V per cell, NiCd and NiMH- 3V per cell, Li-Po/Li-Ion- 2.5V per cell, Li-Fe- 1.8V per cell, Pb
1 POWER-PEAK D7 charger (multiplex). Powerful 2-way home charging station with battery management and integrated power supply. With 2 integrated equalizers and BID system. Both outputs can be used completely independently of each other! 2-way charger with power supply, 12V (DC) and 220V (AC) input. BID chip function! (Battery Identification System) Maximum power 2x 20A simultaneously! Processor-controlled high-performance charging/discharging station, with management functions for all common battery types. With integrated equalizers for 1 to 7 cell Li-Po/Li-Ion/Li-Fe batteries.Features:for Li-Po, Li-Fe, Li-Ion, NiCD, NiMh, Pb batteriesCharging/dischargingBalancer (LiXX)Battery voltage display (LiXX)Safety functionsMax. number of cells: Li-Po/Li-Fe: 1-6 cells, NiCd/NiMh: 1-18 cells, Pb: 2-24VInput voltage AC: 110-240V, DC:10,5-18VCharging/discharging currents: 0,1-20A (per output)Dimensions/weight: 270x200x85mm / 2,6kgOf course, batteries with and without a BID chip can be charged! Set contents:Charger, power cable, crocodile clips, BID key, instructions.
1 multi-charger (Hitec). 4-way professional charger/discharger for 12 and 220V. Microprocessor-controlled high-performance charging/discharging station HiTEC X4ACplus. 4-way charger with power supply and 12V input. Maximum power 4x 6A simultaneously! Processor-controlled high-performance charging/discharging station, with management/care functions for all common battery types. With integrated equalizer for 6-cell Li-Po/Li-Ion/Li-Fe batteries.Features:for Li-Po, Li-Fe, Li-Ion, NiCD, NiMh, Pb batteriesCharging/dischargingcyclic charging/discharging (Nixx)Balancer (LiXX)Battery voltage display (LiXX)Safety functionsMax. number of cells: Li-Po/Li-Fe: 1-6 cells, NiCd/NiMh: 1-15 cells, Pb: 2-20VInput voltage DC: 11-18VInput voltage AC: 110-240VCharging/discharging currents: 0,1-6A (max. 4x 50W)/0,1-1A (max. 4x 5W)Dimensions/weight: 255x170x66mm / 1,73kg
1 charger POWER PEAK B6 EQ-BID. Compact, inexpensive charging/discharging station with 12V and 230V connection. 12V / 230V charger with max. 5A.Compact and inexpensive charging/discharging station with battery management.BID system display of capacity, voltage, equalizer single cell voltage Optional automatic or manual charging/discharging, BID system, display of: charged and discharged capacity, input and charging voltage, equalizer single cell voltage.Battery types: LiPo, Lilon, LiFe, LiHV, NiMh, NiCd, lead batteryNumber of cells: LiXX: 1-6, NiXX: 1-14, Pb/lead: 1-6Input voltage: 10-15V DC or 230V ACCharging current: 0,1 - 5ADischarging current: 0,1 - 10A (max. 5W)Equalizer current: 300mADimensions: 142 x 89 x 25mmWeight: 230gr.Scope of delivery: charger, power cable, connection cable 12V DC, switching power supply 230V -5A, temperature sensor, BID chip, USB cable, balance adapter 2-6S (TP/JST/XH), universal charging cable with crocodile clips, receiver and transmitter charging cable Futaba.
1 switching power supply SPS-9400. 3-15V/40A. Powerful switching power supply with digital display for current and voltage values. Input: 230V/AC. Output power: 600W Weight 3,5kgDimensions: 300x220x110mmmax. Load current 40A.Output voltage: 3-15V continuously adjustable.Switchable to 13,8V constant voltage operation.An ideal home power supply for stationary operation of 12V chargers in the model workshop.Operating voltage: 230V AC/50HzOutput voltage: 3-15V DC adjustable or 13,8V fixed voltageOutput current: max. 40AShort-term output current: 43AResidual ripple and noise: <50mVDisplays / measuring devices: LED 3-digit digital multimeter for voltage and current, 2-color status LED (red=fault/green=operation)Cooling: fanSafety: Protection against overload and overheating, short circuit and reverse polarity protection, output voltage protection at 16,5VDark gray metal housing with rubber feet.High efficiency:> 78%.The device is available as a single device NOT suitable as a charger!
1 PowerBox (Hitec). ePowerBox 17A. Power supply with 17A Power supply specially adapted to the X1 Pro charger, but which can also be used as a compact power supply for other chargers worldwide.Features:- LED indicator- Powerful fan- Input voltage 100-240V for worldwide use- Active power factor correction filter for safe operation- Two outputs/top and side- With on/off switch- USB socket for mobile devicesFunctions:- regulated fan- Input voltage AC: 100 - 240 Volt- Output voltage: 13,8 Volt DC +/-0,2V- Output current: 17 A + /-0,5 A- USB output: 5 V 2,1 ADelivery contentsPower supply ePOWER BOX 17A, power cable 230 VTechnical dataWidth: 126 mmHeight: 51 mmLength: 92 mmWeight: 0.602 KgInput voltage: AC 100-240 VPower in watts: 330BID chip system: No
Switching power supply DM-30-E. 9-15V/25A DC. Powerful switching power supply with digital display for current and voltage values. Input: 230V/AC. Weight 1,5kgDimensions: 205x155x75mmmax. Load current 25A.Output voltage: 9-15V continuously adjustable.Switchable to 13,8V constant voltage operation.An ideal home power supply for stationary operation of 12V chargers in the model workshop.Operating voltage: 230V AC/50HzOutput voltage: 9-15V DC adjustable or 13,8V fixed voltageOutput current: max. 25AShort-term output current: 30AResidual ripple and noise: <80mVDisplays/measuring devices: LED 3-digit digital multimeter for voltage and currentCooling: temperature-controlled fanSafety: Protection against overload and short circuitDark gray metal housing with rubber feet.The device is NOT suitable as a charger as a stand-alone device!
1 switching power supply SPS-9250. 3-15V/25A. Powerful switching power supply with digital display for current and voltage values. Input: 230V/AC. Output power: 380W Weight 2,7kgDimensions: 220x220x110mmmax. Load current 25A.Output voltage: 3-15V continuously adjustable.Switchable to 13,8V constant voltage operation.An ideal home power supply for stationary operation of 12V chargers in the model workshop.Operating voltage: 230V AC/50HzOutput voltage: 3-15V DC adjustable or 13,8V fixed voltageOutput current: max. 25AShort-term output current: 28AResidual ripple and noise: <50mVDisplays / measuring devices: LED 3-digit digital multimeter for voltage and current, 2-color status LED (red=fault/green=operation)Cooling: fanSafety: Protection against overload and overheating, short circuit and reverse polarity protection, output voltage protection at 16,5VDark gray metal housing with rubber feet.High efficiency:> 78%.The device is available as a single device NOT suitable as a charger!