1 Graupner receiver HOTT GR-16, 2,4GHz. 8-channel, Graupner. HOTT system 2,4GHz. The GR-16 receiver can control up to 8 servos. Two LEDs indicate the operating status. Servo connections on the front. Wide voltage range: 3,6-8,4V. Current consumption: approx. 70mA. Dimensions: 64 x 21 x 14mm. Connector system: JR. Model: GR-16 HoTT. HF modulation: FHSS. Channels: 8. Frequency: 2,4GHz. Weight: 12g. The Graupner GR-16 HoTT receiver has approximately... It has a range of 4000m and can be configured with up to 8 channels. Utilizing GRAUPNER HoTT 2,4GHz technology, the receiver features a secure hopping telemetry transmission high-frequency section with high-quality components and state-of-the-art software. A diversity antenna always switches to the better antenna signal for reception and always uses the antenna that was last used for reception for transmission. This ensures that the return channel data is transmitted via the better-positioned antenna. The receiver transmits the parameters "receiver voltage," "receiver temperature," and "signal strength" to the transmitter without additional sensors. Features: The use of up to 75 channels ensures extreme operational reliability and is insensitive to external interference. The wide receiver voltage range of 3,6 V - 8,4 V (functional down to 2,5 V) ensures full functionality even with voltage fluctuations. Two LEDs indicate the operating status. Compact size and minimal weight. Very high receiver input sensitivity, resulting in a very long range. Front-mounted servo connectors facilitate installation and guarantee secure connections. Failsafe, Hold, OFF, and Standard (Channel 1 = Failsafe, all others Hold) are programmable. Compatible with all HoTT transmitters. Functions with optional SMART-Box. 3 mixers are programmable. Servo curves are programmable linearly, degressively, and exponentially. Sum signal at the "Channel 8" output. Programmable. Servo travel limiting and reversal also possible in the receiver. Failsafe, hold, and off for the servo channels individually programmable. Warning thresholds for undervoltage, overtemperature, and undertemperature programmable. Servo test function. The SMART-Box is available as an option and is not included with the receiver. Compatible with all HoTT transmitters. Technical data: Channels: 8. Sum signal output: Yes. Dimensions approx.: 46 x 21 x 14 mm. Weight approx.: 12 g. Frequency: 2400 ... 2483.5 MHzModulation: 2.4 GHz FHSSRange: approx. 4000 m Current consumption: 70 mA Operating voltage: (2,5V) 3,6V to 8,4VA Number of antennas: 2 (Diversity) Antenna length: 2x wire 145 (antenna 30) mm Temperature range: -15 to +70°CHoTT- is the synthesis of know-how, engineering and worldwide tests by professional pilots. A 2,4 GHz system that is setting the standard for the future of RC model building. HoTT (Hopping Telemetry Transmission) offers safety with up to 75 channels. HoTT uses Frequency Hopping Spread Spectrum technology. (FHSS) HoTT offers integrated real-time telemetry. (Expandable) HoTT is fully programmable using the Smartbox. System Features: Simple and extremely fast binding; range test and undervoltage warning function; extremely wide receiver operating voltage range from 3,6 V to 8,4 V (functional down to 2,5 V); failsafe, free channel mapping; binding of any number of receivers for channel expansion (max. (32 channels) Up to 4 servos can be controlled simultaneously in blocks with a servo cycle time of 10 ms (Digital servos only!) Maximum interference immunity thanks to optimized frequency hopping and wide channel spread. Extremely fast rebinding, even at maximum distance. Real-time telemetry evaluation. Future-proof thanks to update capability via USB interface.

1 Graupner receiver HOTT GR-12L.2,4GHz. 6-channel, Graupner. HOTT system 2,4GHz. The GR-12L receiver can control up to 6 servos. A green LED indicates the operating status.Servo connections on the front.Wide voltage range: 3,6-8,4V.Current consumption: approx. 70mA.Dimensions: 36 x 21x 10mm.Connection system: JRModel: GR-12L HoTTHF modulation: FHSSRange: 2000mChannels: 6Frequency: 2,4GHzWeight: 7gr.Antenna length: 145mmReceiver is largely identical to GR-12, but without some receiver-side functions (e.g. servo reverse) that are already included in today's transmitters.

1 Graupner receiver HOTT GR-24, 2,4GHz. 12-channel, Graupner. HOTT system 2,4GHz. The GR-24 receiver can control up to 12 servos. Two LEDs signal the operating status.Front servo connections.Large voltage range: 3,6-8,4V.Current consumption: approx. 70mA.Dimensions: 64 x 31x 14mm.Plug system: JRModel: GR-24 HoTTHF modulation: FHSSChannels: 12Frequency: 2,4. 16GHzWeight: 24gr.The Graupner GR-12 controls up to 24 servos. Thanks to antenna diversity, the best antenna signal is always used. Receiver voltage, temperature and signal strength are transmitted to the HoTT transmitter without additional sensors. The GR-3,6 is extremely insensitive to interference. The wide voltage range guarantees full functionality from 8,4 V to 2,5 V and is even functional up to 24 V. The servo connections on the front make installation easier and always guarantee a tight connection. The operating status of the receiver is displayed using two LEDs . Compared to the previous version, the size and weight have been reduced, but the range has been significantly increased. Failsafe, Hold, Off and Standard are freely programmable on the GR-33700. For older transmitters without the bi-directional Graupner HoTT technology, we recommend installing one Graupner Smart Box (No. 75). Take advantage of the additional programming and telemetry data options.Product featuresThe use of up to 3,6 channels ensures extreme operational reliability and is insensitive to external interference.The wide receiver voltage range of 8,4 V - 2,5 V (functional up to 1. 5 V) ensures full functionality even in the event of voltage fluctuations. Two LEDs signal the operating status. The size and weight could be reduced. The receiver input sensitivity and thus the range has been further increased. Front-side servo connections. Failsafe, Hold, OFF and standard (channel 8 failsafe, all other hold) programmable.Functions with SMART-BOX:19 mixers programmableServo curves linear, degressive and exponential programmableSum signal input or output on channel 22programmable (e.g. for V-Stabi, Microbeast, quadrocopter, wireless student function with mc-31/14 HoTT , flight simulators, satellite function) Limitation and reversal of the servo paths also possible in the receiver Failsafe, hold and OFF for the servo channels individually programmable Warning thresholds for undervoltage, overtemperature and undertemperature programmable Servo test function Technical data Width [mm]: 15 mm Height [mm]: 70 mm Temperature range [°C]: -2 . .. +145 °CAntenna length [mm]: 30x wire 16 (antenna 2400) mmTotal weight [g]: 2483,5 gFrequency: 4000 ... 46 MHzRange approx. [m]: 46 mLength [mm]: 31 mmDimensions [LxWxH in mm]: 14 x 2.4 x 70 mmModulation: 2,5 GHz FHSSCurrent consumption [mA]: 3,6 mAOperating voltage [V]: (8,4) 12 ... 2 VChannels: XNUMXNumber of antennas:XNUMX

1 Graupner receiver HOTT GR-12, 2,4GHz. 6-channel, Graupner. HOTT system 2,4GHz. The GR-12 receiver can control up to 6 servos. Two LEDs indicate the operating status. Servo connections on the front. Wide voltage range: 3,6-8,4V. Current consumption: approx. 70mA. Dimensions: 36 x 21x 10mm. Plug-in system: JRModel: GR-12 HoTTHF modulation: FHSSChannels: 6Frequency: 2,4GHzWeight: 7gr.

1 Graupner HOTT GR-32 receiver, 2,4 GHz. 16-channel, Graupner. HOTT system 2,4 GHz. The GR-32 receiver can control up to 16 servos. Two LEDs indicate the operating status. Servo connectors on the front. Wide voltage range: 3,6-8,4 V. Current consumption: approx. 140 mA. Dimensions: 63 x 30 x 14 mm. Connector system: JR. Model: GR-32 HoTT. RF modulation: FHSS. Channels: 16. Frequency: 2,4 GHz. Weight: 24 g.

ScaleART Commander Multi-Receiver Unit CM-5000. The multifunctional talent... Special operating modes for commercially available servos are tailored to the requirements of functional model building. For example, there is a mode to operate a servo like a hydraulic cylinder: when you release the stick, it remains in its current position. This can also be expanded to a windshield wiper using an interval switch. The rotation speed of servos (also in normal operation) can be adjusted to achieve particularly realistic movements. Freely programmable mixers can be used to implement special functions such as the correct steering of tracked vehicles, limit switches for drives, delayed response or any path curves. The optionally integrated programmable controller (PLC) in the receiver also allows the individual implementation of processes that would otherwise only be possible with complex additional modules. The control center for the light bus system is permanently integrated in all Scaleart receivers. This allows for customizations such as programmable flashing rate and automatic indicator reset after turning, adjustable response thresholds for curve and cornering lights or dependencies between vehicle lighting and operating status. The CM-5000 offers the complete equipment: connections for 16 servos, two temperature or pressure sensors and the bus lighting system. An integrated position sensor determines incline or decline as well as lateral inclination. To operate hydraulic pumps or auxiliary drives, there is a regulator that can handle 4 amps. In addition, the receiver can monitor the power supply of the entire model: an integrated sensor measures the current drawn from the battery and determines the capacity consumed. There is also an infrared output, which enables convenient operation with trailers or semi-trailers that have a lighting system from Scaleart or Robbe. The CM-5000 measures 63x41mm, the remotely mounted antenna measures 40x17mm. If more connections are required, up to 8 of these receivers can be operated on a common antenna in the model. The RF antenna is required! Functional overview Multi-Receiver Unit CM-5000: Servo slots: 16 Usable for switching functions: 16 Usable as inputs: 8 Function blocks (mixers): 16 Light bus control: yes IR output: Compatible with Robbe and Scaleart Integrated controller for auxiliary drives: Up to 3 amps, with overcurrent, short-circuit and temperature protection Control of multiswitch modules: 1 compatible with Graupner, Robbe and ScaleART Battery voltage measurement: yes Current consumption measurement: yes Battery management with reverse polarity protection: Loadable up to 12 amps, maximum operating voltage 18 volts Additional sensor connections: 2 Position sensor: Tilt and incline Adjustable alarm thresholds: Individual minimum or maximum values ​​monitored for all measured values ​​Mixer for tracked vehicles: yes End stop via position sensor: yes Undervoltage protection: yes Controller current limiting: yes Sequential gearbox control: up to 4 gears Free Path template: yes Brake light function: yes Smoke generator control: yes Resettable operating hour counters: 4 Adjustable servo response time: 0-20 seconds Adjustable servo travel: 0-200% left and right separately Hydraulic simulation for servos: yes Programmable sequence control: yes* Password protection: Separate for operation and configuration Power supply: BEC or drive battery, 4,8 to 18 volts Bus-compatible (multiple evaluation units in the model): yes Software update possible in the model: yes Dimensions: 63x41mm* Sequence control only configurable with Commander SA-1000/SA-5000

ScaleART Commander Multi-Receiver Unit CM-1000. Without RF antenna module. The multifunctional talent... special operating modes for commercially available servos are tailored to the requirements of functional model building. For example, there is a mode for operating a servo like a hydraulic cylinder: when the stick is released, it remains in its current position. This can also be extended to a windshield wiper using an interval switch. The rotation speed of servos (even in normal operation) is adjustable to achieve particularly realistic movement sequences. Freely programmable mixers can be used to implement special functions, such as the directional steering of tracked vehicles, limit switches for drives, delayed response, or any desired path curves. The optionally integrated programmable controller (PLC) in the receiver also allows the individual implementation of sequences that would otherwise only be possible with complex additional modules. The control center for the light bus system is permanently integrated in all Scaleart receivers. This allows for customizations such as programmable flashing frequency and automatic turn signal reset after turning, adjustable response thresholds for curve and cornering lights, or dependencies between vehicle lighting and operating status. The CM-1000 receiver is designed for models with a limited range of functions. It offers 10 connections for servos and, via an adapter cable, can directly control the light bus system. The entire unit measures just 40x28mm. The RF antenna is required! Function overview of the CM-1000 multi-receiver unit: Servo slots: 10 Usable for switching functions: 8 Usable as input: 1 Function blocks (mixer) 8 Light bus control: no Control of multi-switch modules: 1 Compatible with Graupner, Robbe, and ScaleART Battery voltage measurement: yes Adjustable alarm thresholds: low battery voltage Hydraulic pump control: max. 16 functions monitored Mixer for tracked vehicles: yes Undervoltage protection: yes Sequential gear control: up to 3 gears Free path template: yes Brake light function: yes Resettable operating hour counter: 1 Adjustable servo setting time: 0-20 seconds Adjustable servo travel: 0-200% right and left separately Hydraulic simulation for servos: yes Password protection: Separate for operation and configuration Power supply: BEC or drive battery, 4,8 to 18 volts Bus-capable (multiple Evaluator in the model): yesSoftware update in the model possible: yesDimensions: 40x28mm

ScaleART Commander ribbon cable 4-pin. Length 105mm. Connects multiple receivers.

1 receiver Multiplex RX-4/9 M-Link, FLEXX. 4+9 channel, 2,4GHz receiver. Max. 4 proportional and 9 switching channels. (55837). Universal receiver with SRXL serial servo output. Adjustable multiplex smart ID for intelligent model recognition. With hold/fail-safe function.Frequency band: 2,4GHzModulation: FHSSChannels: 4x proportional plus max. 9x switching functionPlug system: UNI/JRVoltage: 3,5-9VDimensions: 34x20x11mmWeight: 7gr.

1 receiver 2,4GHz R-2008SB 8 channels 2 antennas, summarizes system, Futaba. With 1x S.BUS output. 43x25x9 / 12,5mm. 9,6gr. Mass. Current: 40mA.

ScaleART Commander HF antenna module

Multiplex USB PC cable RX + S + telemetry. Enables the reading / programming / updating / setting of many M-Link, PPM, M-PCM, via RX Data Manager. Update MultiMate, programming of sensors

KO-PROPO 8-channel receiver. 2,4 GHz. KO 8K Receiver MR-8 MX-F 2,4 GHz. Carson 500501545 Receiver 8Ch KO MR-8 MX-F RX 2.4GHz is an 8-channel receiver in the 2,4 GHz band, specifically designed for model building enthusiasts. Designed as the KOMR-8 MX-F RX, it ensures reliable signal transmission and precise channel control of complex models, thus providing the basis for controlled driving and flight maneuvers.

1 receiver 2,4GHz R-6308SBT 8 channels 2 antennas, FASST system, Futaba. With telemetry. With S.BUS output. 47x25x14,3mm. 13gr. Weight. Current: 50mA. Switchable for channels 1...8 or 9...16. Parallel operation of 2 receivers for 16 servo channels possible. Channel 8 switchable to S.BUS operation.