Servo Steller

Servo controller travel tip delay. Moves a servo with it

Servo controller travel-tip-delay. Moves a servo with adjustable speed and adjustable servo travel. CTI product. This servo controller is a true all-round talent! The 2 adjustment potentiometers allow the speed of the servo movement (delay) to be adjusted, as well as the reduction of the servo travel. The servo controller travel-tip-delay can be operated directly on the receiver output or via a PS4x module!

Available immediately, delivery time: 1-4 days

Product number: 6057

€ 18,00 *

Subscriptions

1 servo module Dual Rate and Reverse. Module with 1 input

1 servo module dual rate and reverse. Module with 1 input (servo UNI cable) and 2 outputs. With this module, the servo travel can be set from 0,5-125%. In addition, the direction of rotation of the servo (reverse) can be changed using a switch! The DIP switch is located on the module. The 2nd output corresponds 100% to the input. This means that 2 servos can be connected to the module, with one servo following the control transmitter 100%, but the 2nd servo with reduced or increased servo travel (or in the opposite direction!). This module is therefore ideal for controlling 2 steering axes with different steering behavior. The servo travel setting is set directly on the module using an SMD potentiometer.

Available immediately, delivery time: 1-4 days

Product number: 5975

€ 20,99 * € 21,45 * (2.14% saved)

Subscriptions

1 Schubboden control 3er-Sequenz.SBS3. Control for 3

1 moving floor control 3-sequence.SBS3. Control for 3 servos for a moving floor control. Forward and reverse running until the end of the cycle. With PS4aT function! This module is operated directly on a free receiver output. It makes sense to control it using a 3-position switch on the transmitter. However, ANY control element (joystick, slider, button, rotary potentiometer, etc.) is possible! Depending on the servos used, an additional power supply MAY be necessary (e.g. for powerful digital servos) - normally the supply via the receiver is sufficient. The module works from approx. 3V operating voltage.

Available immediately, delivery time: 1-4 days

Product number: 5970

€ 30,00 *

Subscriptions

1 servo module delay 1 input, 1 output. Servo runtime can

1 servo module delay 1 input, 1 output. Servo runtime can be continuously adjusted from 0-10 seconds using a potentiometer. The module can be used to simulate realistic movement sequences. For example, when steering - despite rapid full deflection on the transmitter, the steering servo steers at a speed like in reality. In reality, no one has ever seen the wheels on the steering axle of a truck change from right to left full deflection in 1 second. This module is useful wherever realistic, proportional movement sequences are required. - Finally available again!

Available immediately, delivery time: 1-4 days

Product number: 6026

€ 21,40 * € 21,45 * (0.23% saved)

Subscriptions

Servo controller MultiPoint. Moves a servo on 3 respectively

MultiPoint servo controller. Moves a servo to 3 adjustable positions. CTI product. This servo controller is a positioning talent! The 3 adjustment potentiometers allow the setting of 3 servo positions. The MP servo controller can be operated directly on the receiver output or via a PS4x module!

Available immediately, delivery time: 1-4 days

Product number: 11548

€ 24,00 *

Subscriptions

1 Servo Module Exponential. 1 input, output 1. The module

1 servo module exponential. 1 input, 1 output. The module changes the servo's follow-up behavior (adjustable). The module allows you to adjust the follow-up behavior of the connected servo. In the area around the zero point (center position) of the transmitter control (eg joystick), the servo reacts weaker (less), but more strongly at the end deflections of the control. The follow-up behavior can be adjusted using the module's potentiometer.

Available immediately, delivery time: 1-4 days

Product number: 6028

€ 20,99 * € 21,45 * (2.14% saved)

Subscriptions

Multi-Servo Adjuster for 4 servos. MSA10 A servo channel

Multi-Servo Adjuster for 4 servos. MSA10 A servo channel is divided into up to 4 servo outputs. Each of these max. 4 servos can be adjusted individually. F1651.

No longer available

Product number: 5730

€ 85,00 *

Subscriptions

Details