1 servo HS-645MG (Hitec). Powerful standard servo. Dimensions: 40x20x37mm. 55gr. Metal gear. 2 ball bearings. 77/96Ncm. 0,24s/60°. Uni/JR connector. Powerful standard servo. Ideal as a steering servo. Scope of delivery: 1 servo 5 control discs/levers Fastening material Gearing: 24T Ball bearing: yes Waterproof: no Torque at 4,8V: 8kgcm Torque at 6,0V: 10kgcm Gear: metal Motor type: brushed Electronic type: analog

1x standard servo CS-3 with JR connector. Dimensions: 38,5x19x32mm. 4,8-6V voltage. Actuating torque at 4,8V: 31Ncm. Actuating time approx. 0,17sec./60°. Weight 39 g. Accessories: 2 rudder levers and screws.

1 Servo HS-40 (Hitec). Analogue nano servo. Dimensions: 20x8,6x17mm. 4,8gr. Nylon gear. 6 / 7,6Ncm. 0,12s / 60 °. Uni / JR plug. Power is supplied with 4 different servo arms.

1x power servo CS-9 MG with JR connector. Dimensions: 40x20x38mm. 4,8-6V voltage. Actuating torque at 4,8V: 85Ncm. Actuating time approx. 0,1sec./60°. Weight 50 g. Accessories: 2 rudder levers and screws. This powerful servo is equipped with ball bearings and metal gears. It is also splash-proof and is therefore ideal as a steering servo in vehicles that sometimes move in damp environments!

1 steering servo mounting plate, black, for Tamiya. Made of Delrin/POM. SVP. 58,5 x 59,5 x 3mm. Mounting plate for steering servo in standard size (cutout 42,5x21mm). Material thickness 3mm. Steering axle is installed rotated by 180° (tie rod to the rear!) Suitable for Tamiya frames. Useful in conjunction with underfloor drives.

Cable clamps (8 pieces = 1 set) small, self-adhesive. Suitable for repeated opening. Approx. 16x11mm.

1 servo HS-85MG (Hitec). Analogue powerful mini servo. Dimensions: 29x13x30mm. 22g metal gear. 3/4kgcm. 0,14-0,16s/60° Uni/JR connector. Servo is supplied with various servo levers. Ball bearing. It is considered one of the most robust servos in this class. The analogue HS-85MG servo with its 3-pole brush motor offers unparalleled durability thanks to its exclusive metal gear and a ball bearing on the output shaft, which is particularly suitable when low play and high positioning precision are important. The HITEC servo HS-85MG delivers maximum performance with minimal weight and with these data is also a favorite for industrial applications. The long service life and the uniquely designed gear make it one of the most reliable and efficient mini servos on the market.Features:- Longlife potentiometer- High durability- Metal gear- Ball bearingTechnical dataWidth: 13 mmHeight: 30 mmLength: 29 mmWeight: 0.022 kgServo type: standardSpecial features: analogMotor type servos: brushedGear: metalOperating voltage in V: 4,8-6,0 V

10 round grommets made of soft PVC, black. Approx. 9mm outer diameter, 4mm inner hole, height 5mm, slot width 1,5mm.

Cable clamps (8 pieces = 1 set) large, self-adhesive. Suitable for repeated opening. Approx. 19,2x16mm.

Cable holder, self-adhesive, 4 pieces. Adhesive area: 19x10mm. The flap is simply bent over for fixing.

1 HS-81 servo (Hitec). Analog standard micro servo. Dimensions: 29,8 x 12 x 29 mm. 17 g. Nylon gear. 2,6/3 Ncm. 0,11 s-0,09/60°. Uni/JR connector. Servo comes with various servo arms. The HS-81 impresses with its good price-performance ratio. The analog HS-81 servo is equipped with a 3-pole brushed motor and elastic nylon gears. Technical specifications: Width: 12 mm, Height: 29 mm, Length: 29,8 mm, Weight: 0.017 kg, Servo Type: Micro, Special features: analog, Servo motor type: brush, Gearbox: Nylon, Operating voltage in V: 4,8-6,0 V, Response time s/60° at 4,8 volts: 0.11, Response time s/60° at 6,0 volts: 0.09, Torque in kg/cm at 4,8 volts: 2,6, Torque in kg/cm at 6,0 volts: 3, Gearing: 24T, Ball bearings: No, Waterproof: No, Recommended for flight: Yes, Recommended for helicopter: Yes, Recommended for car: Yes, Recommended for boat: Yes

Servo holder (standing), black for standard servos. Material: PET, very stable. Maximum size of the servo to be attached (not included): 42x21x29mm.

1x standard servo CS-6 with JR connector. Dimensions: 38,5x19x32mm. 4,8-6V voltage. Actuating torque at 6V: 60Ncm. Actuating time approx. 0,2sec./60°. Weight 50 g. Accessories: rudder lever and screws. The CARSON CS-6 servo is a powerful and fast servo in standard size. The robust metal gear ensures a long service life of the servo. Ideal for use in models that require a strong steering or positioning servo.

1 servo HS-65MG (Hitec). Analogue powerful micro servo. Dimensions: 24x12x24mm. 12g metal gear. 2Ncm. 0,11-0,14s/60°. Uni/JR connector. Servo is supplied with various servo levers.

Servo SES 640 2BB MG. 28,2x14,2x32,1mm. 64Ncm. 0,1sec./40°. 27 gr. 4,8-6,0V. Nominal values ​​measured at 6,0V. Incl. various servo arms and mounting material.

AGF-RC B9DLM digital servo with ball bearings. Dimensions: 23 x 12,0 x 21,4 mm. Weight: 11 g. Mini digital servo. Digital servo. Classification: Mini. Motor: Brushed motor. Gearbox: Metal. Housing: Plastic. Number of ball bearings: 1. Operating voltage: 4,8 - 6,0 V. Actuating time (sec) to 60 degrees: 0,11 at 4,8 V and 0,10 at 6,0 V. Actuating force (kg): 2,2 at 4,8 V. Weight (g): 11. Dimensions L/W/H (mm): 23 x 12,0 x 21,4. Scope of delivery: Servo including servo arm and mounting screws. Area of ​​application: Airplane, car, boat. Possible applications: Special functions on functional models, tow bar/differential lock operation on truck models, fifth wheel operation. Packaging: Small blister pack.

1x metal horn for servo, half arm. HITEC, output lever. Cyan. 4 holes 1,6mm. Teeth T24. Suitable for servos: HS-5245 / 5625 / 5645 / 5925 / 5945MG / 7235 / 7245MH / 5085GM.

1 servo HS-5645MG (Hitec). Powerful digital servo. Dimensions: 41x20x38mm. 60gr. Metal gear. 2 ball bearings. 103/121Ncm 0,23s/60°. Uni/JR connector. For 4,8-6V! Very powerful digital servo. Also suitable as a steering servo. Scope of delivery: 1 servo 4 control discs/levers 1 metal half-arm servo lever Fastening material

AGF-RC A73BHLW digital servo with ball bearings. Dimensions: 40 x 20,0 x 37,5mm. Weight: 73,5 g. Brushless servo. 29kg at 4,8V. Digital servoClassification: StandardMotor: Brushless motorGearbox: TitaniumHousing: Solid aluminumNumber of ball bearings: 2Operating voltage: 4,8 - 8,4V HV-capablePositioning time (sec) to 60 degrees: 0,10sPositioning force (kg): 29 at 4,8 V, 40 at 8,4VWeight (g): 73,5Dimensions L/W/H (mm): 40 x 20,0 x 37,5Waterproof: yes, according to IP67Positioning: by magnetic, wear-free encoder Scope of delivery: Servo including servo lever and fastening materialApplication area: Airplane, car, boatPossible application examples: particularly suitable as a steering servo.Packaging: Blister, largeThis servo can be programmed with the optionally available USB interface. Of course, these are optional features. The servo can be operated normally straight out of the package and does not need to be set up beforehand.

1 servo DES-707 BB,MG, Graupner. With metal gear and 2 ball bearings. Voltage 4,8-6,0V. Dimensions: 40x39x19,5mm without mounting flanges. Weight 53g. Torque 133/150 Ncm (4,8/6,0V). Very powerful digital servo - ideal as a steering servo. Actuating torque 133 Ncm at 4,8V or 150 Ncm at 6,0V. Actuating time 0,17s/40° at 4,8V or 0,14s/40° at 6,0V. Current consumption max. 1,6A (4,8V) / 1,95A (6,0V). Toothing: 25Z. Supplied with various control discs and fastening material.

1 servo HS-225MG (Hitec). Analogue mini servo. Dimensions: 32,4x16,8x31mm. 31gr. Metal gear. 39/48Ncm. 0,14s/60°. Uni/JR connector. Servo is supplied with 4 different servo arms. Servo with 1 ball bearing. When a lot of torque and high speed is required despite low weight and small dimensions!

Servo HS-82MG (Hitec). Analogue standard micro servo. Dimensions: 30x12x30mm. 19gr. Metal gear. 2,8/3,4 kgcm. 0,12s/60° Uni/JR connector. Servo is supplied with various servo arms. It is considered one of the most robust servos in this class. The analogue HS-82MG servo with its new powerful motor offers unparalleled durability thanks to its exclusive metal gear. The HS-82MG delivers maximum performance with minimal weight and with these data is also a favorite for industrial applications. The HITEC servo HS-82MG delivers maximum performance with minimal weight and with these data is also a favorite for industrial applications. The long service life and the uniquely designed gear make it one of the most reliable and efficient mini servos on the market.Features:- Longlife potentiometer- High durability- Metal gearTechnical dataWidth: 12 mmHeight: 30 mmLength: 30 mmWeight: 0.019 kgServo type: standardSpecial features: analogMotor type servos: brushedGear: metalOperating voltage in V: 4,8-6,0 V

SAVÖX Servo SC-0251MG digital servo. Dimensions: 40,7 x 19,6 x 42,4 mm. 61 grams. Powerful digital servo. Digital Servo Classification: Standard Motor: Brushed Motor Gearbox: Metal Number of teeth on output pinion: 25 Housing: Plastic Number of ball bearings: 2 Operating voltage: 4,8 - 6,0 V Actuating time (sec) to 60 degrees: 0,20 at 4,8 V and 0,18 at 6,0 V Actuating force (kg): 13,0 at 4,8 V and 16,0 at 6,0 V Weight (g): 61,0 Dimensions L/W/H (mm): 40,7 x 19,6 x 42,4 Scope of delivery: Servo including servo arm and mounting screws Application area: Airplane, car, boat Possible application examples: Steering servo in 1/8 scale buggies and truck models, 50s model aircraft, steering axle control of low-loader trailers Packaging: Large blister pack

1 servo HS-646WP (Hitec). Powerful analog servo. Dimensions: 41x20x40mm metal gear. 2 ball bearings. 70/90Ncm 0,26s/60°. Uni/JR connector. For 4,8-8,4V! The waterproof analog standard servo is tested according to the industry standard IP67. The HS-646WP offers what it should: it is 100% waterproof, unparalleled durability thanks to its exclusive metal gear, with 2 ball bearings on the output shaft. It is particularly suitable when high positioning precision and low play are important. The HITEC servo HS-646WP delivers maximum performance with minimal weight and with these data is sure to be a favorite for industrial applications. The long service life and the uniquely designed gear make it one of the most reliable and efficient analog servos on the market. The waterproof HS-646WP is ideal for ship and submarine model building, as well as off-road cars. Technical data: Width: 21 mm Height: 40 mm Length: 41 mm Weight: 0.058 kg Servo type: Standard Special features: Wide-voltage analog Motor type servos: brushed Gearbox: Metal Operating voltage in V: 4,8-8,4 V Setting time s/60° at 4,8 volts: 0.26 Setting time s/60° at 6,0 volts: 0.22 Torque in kgcm at 4,8 volts: 7 Torque in kgcm at 6,0 volts: 9 Gearing: 24T Ball bearings: Yes Waterproof: Yes Recommended flight: No Recommended helicopter: No Recommended car: Yes Recommended boat: Yes  

Holder for relay channel switch. Material: PETG, black, very stable. Suitable for detachable attachment of items 11250 and 9856.

1x Waterproof-Servo CS-13 MG with JR connector. Dimensions: 41x20x38mm. 4,8-6V voltage. Actuating torque at 6V: 135Ncm. Actuating time approx. 0,12sec./60°. Weight 49 g. Accessories: 2 rudder levers and screws. The CARSON CS-13 MG servo is a powerful and fast servo in standard size. Ball bearings and the metal gear ensure a long service life of the servo. Ideal for use in models that require a strong steering or positioning servo.

Micro servo SES 85. 23x10x21,8mm. 8,5Ncm 0,08sec./40°. 6 gr. 4,8-6,0V. Nominal values ​​measured at 6,0V. Incl. various servo arms and mounting material.

1x Servo Futaba P S3003, analog, standard servo universally. 19,8mm thick 32Ncm 0,18sec / 45 ° 40,4x19,8x36mm, 4,8 - 6V, 37,2gr.

Extremely powerful digital servo Classification: Standard Motor: Bell-type armature Gearbox: Steel Number of teeth on output pinion: 25 Housing: Solid metal Number of ball bearings: 2 Operating voltage: 4,8 - 6,0V Setting time (sec) to 60 degrees: 0,16 at 4,8 V and 0,13 at 6,0 V Setting force (kg): 25 at 4,8 V and 30 at 6,0 V Weight (g): 80 Dimensions L/W/H (mm): 40,8 x 20,2 x 36,4 Scope of delivery: Servo including servo lever and fastening screws Area of ​​application: Airplane, car, boat Possible application examples: Steering servo for trucks (also off-road), linkages with high power requirements. Packaging: Blister, large

HITEC Servo D-625MW digital servo Dimensions: 40x20x38mm. 68g. Metal gear. 6,3/8,8/10,0kgcm. 0,20s/0,15s/0,13S/60°. Voltage 4,8-7,4Volt. Connector JR-UNI

1 servo DES-708 BB,MG, digital.Graupner. With metal gear and 2 ball bearings. Voltage 4,8-6,0V. Dimensions: 40x39x19,5mm without mounting flanges.Weight 53g. Torque 88/105 Ncm (4,8/6,0V). Graupner digital servo DES 708.Standard servo from Graupner.Toothing: 25ZThis Graupner servo is supplied with 4 servo disks and mounting material.

Digital servo Classification: Mini Motor: Brush motor Gearbox: Plastic Number of teeth on output pinion: 21 Housing: Partial metal/plastic Number of ball bearings: 1 Operating voltage: 4,8 - 6,0V Actuating time (sec) to 60 degrees: 0,16 at 4,8 V and 0,13 at 6,0 V Actuating force (kg): 3,1 at 4,8 V and 3,9 at 6,0 V Weight (g): 15,8 Dimensions L/W/H (mm): 22,8 x 12,0 x 29,4 Scope of delivery: Servo including servo lever and fastening screws Area of ​​application: Airplane, car, boat Possible application examples: Swashplate for smaller helicopters, actuation of tow bar/differential locks on truck models, fifth wheel actuation. Actuation of hydraulic valves (not suitable for every manufacturer!) Packaging: Blister, small

1x standard servo CS-5 with JR connector. Dimensions: 38,5x19x32mm. 4,8-6V voltage. Actuating torque at 4,8V: 50Ncm. Actuating time approx. 0,17sec./60°. Weight 39 g. Accessories: 2 rudder levers and screws.

1x Low-Profile-Servo CS-3 with JR connector Dimensions: 38,5x19x25mm. 4,8-6V voltage. Actuating torque at 4,8V: 31Ncm. Actuating time approx. 0,17sec./60°. Weight 39 g. Accessories: 2 rudder levers and screws. Low-Profile-Servo, waterproof. Splashproof.

FineLine steering servo mounting plate black for mounting two standard servos in front of the steering axle. 60x60x3mm.

Servo holder (lying), black for standard servos. Material: PET, very stable. For servos with a maximum length of 42mm.

FineLine steering servo mounting plate black for mounting one servo in front of the steering axle. 60x60x3mm. For standard servo size (40,5 x 20,5mm) central installation

1 Universal Servohalter, plastic. For standard servos. 1 set (2 parts). (230265).

Servo Futaba P S148. Universal servo. Standard servo universally 20,0mm thick 30Ncm 0,16sec / 45 ° 41x20x36mm, 4,8 - 6V, 44gr. Incl. Assembly parts / Servo Arm.

1x power servo CS-20 with JR connector. Dimensions: 76x54x32mm. 4,8-6V voltage. Actuating torque at 4,8V: 207Ncm. Actuating time approx. 0,2sec./60°. Weight 143g. Accessories: 2 rudder levers and screws. Powerful large model servo with metal gears. Technical data: Operating voltage 4,8-6V Actuating time at 6V 0,2 sec/60° Actuating time at 6V: 0,2 sec/60° Actuating torque: at 4,8V - 207 Ncm, at 6V - 225 Ncm Dimensions: 75,8 x 53,9 x 32,1mm Weight 143g.

1 servo HS-5625MG (Hitec). Powerful digital servo. Dimensions: 41x20x38mm. Metal gear. 2 ball bearings. 80/100Ncm 0,17s/60°. Uni/JR connector. For 4,8-6V! For applications that require a fast standard digital servo, the HS-5625MG is an excellent choice. The HS-5625MG servo is fully programmable and offers unparalleled durability thanks to its exclusive metal gear, which is particularly suitable when low backlash and high positioning precision with moderate mechanical shock are important. The HITEC servo HS-5625MG delivers maximum performance with minimal weight and with these data is sure to be a favorite for industrial applications. The long service life and the uniquely designed gear make it one of the most reliable and efficient mini servos on the market. The HS-5625MG servos for the demanding model sports enthusiast, whether in the aircraft, car or boat sector. Features: Digital MOS-FET amplifier Longlife potentiometer High holding power Two ball bearings Metal gear Technical data: Width: 20 mm Height: 38 mm Length: 41 mm Weight: 0.06 kg Servo type: Standard Special features: Digital Servo motor type: brushed Gear: Metal Operating voltage in V: 4,8-6,0 V Setting time s/60° at 4,8 volts: 0.17 Setting time s/60° at 6,0 volts: 0.14 Torque in kgcm at 4,8 volts: 8 Torque in kgcm at 6,0 volts: 10 Gearing: 24T Ball bearings: Yes Waterproof: No Recommended flight: Yes Recommended helicopter: Yes Recommended car: Yes Recommended boat: Yes  

1x special servo HSR-2645CR (Hitec). 360° servo. Dimensions: 41x20x38mm. 53gr. Endlessly rotating servo! 80/100Ncm metal gear. Uni/JR connector. For 4,8-7,4V! 46/72 rpm. Ball bearing. Endlessly rotating servo with 1 control disc (round) and fastening material. Servo rotates endlessly in both directions (suitable for drives), depending on the position of the control stick (encoder in the transmitter). Digital servo, programmable, wide-voltage: 4,8-7,4V. 2 ball bearings. 3 metal number wheels.

Servo Futaba S3114 nano, ultra-fast 11mm servo, 7,8gr., 17Ncm, 0,07sec/45° 22 x 11,0 x 20 mm. Incl. mounting material/servo arm. Operating voltage: 4,8 - 6,0VWeight: 7,8gr.Analog micro servo with plastic gearLow-wear potentiometerRobust plastic housingHigh resolutionHigh positioning accuracy

FineLine steering servo mounting plate black for mounting one servo in front of the steering axle. 60x60x3mm. For standard servo size (40,5 x 20,5mm)

1x Waterproof servo CS-6MG with JR connector. Dimensions: 38,5x19x32mm. 4,8-6V voltage. Actuating torque at 6V: 60Ncm. Actuating time approx. 0,2sec./60°. Weight 50 g. Accessories: rudder lever and screws. The waterproof CARSON CS-6 MG servo is a powerful and fast servo in standard size for use in damp and wet environments (autumn/winter). The robust metal gear ensures a long service life of the servo. Ideal for use in models that require a strong steering or positioning servo.

1 servo HS-5585MH (Hitec). Powerful digital servo. Dimensions: 40x20x38mm. 59gr. Metal gear. 2 ball bearings. 114/117Ncm 0,17s/60°. Uni/JR connector. For 4,8-8,4V! Suitable for 2s operation! Powerful digital servo. Also suitable as a steering servo. Scope of delivery: 1 servo 4 control discs/levers Fastening material

1 servo HS-5565MH (Hitec). Powerful digital servo. Dimensions: 40x20x38mm. 59g. Metal gear. 2 ball bearings. 110/140Ncm 0,11s/60°. Uni/JR connector. For 6-8,4V! Powerful digital servo. Also suitable as a steering servo.Scope of delivery:1 servo4 control discs/leversFastening materialSuitable for 2S LiPo operation.Technical data:Width: 20 mmHeight: 38 mmLength: 40 mmWeight: 59 grServo type: standardSpecial features: wide-voltage digitalMotor type servos: brushedGearbox: metalOperating voltage in V: 4,8-8,4 VSetting time s/60° at 6,0 volts: 0.11Setting time s/60° at 7,4 volts: 0.09Torque in kgcm at 6,0 volts: 11Torque in kgcm at 7,4 volts: 14Gearing: 24TBall bearings: YesWaterproof: NoRecommendation for flight: YesRecommendation for helicopter: YesRecommendation for car: YesRecommendation for boat: Yes

1 HS-7955TG servo (Hitec). Powerful premium servo. Dimensions: 40x20x37mm. 65g. Titanium gear. 2 ball bearings. 180/250Ncm. 0,19s/60°. Uni/JR connector.

1 special servo HSR-1425CR (Hitec). 360° servo. Dimensions: 41x20x37mm. 42gr. Endlessly rotating servo! 28/34Ncm nylon gear. Uni/JR connector. For 4,8-6V! 44/52 rpm. 2 ball bearings. Endlessly rotating servo with 1 control disc (round) and mounting material. Servo rotates endlessly in both directions (suitable for drives), depending on the position of the control stick (encoder in the transmitter). Width: 20 mm Height: 37 mm Length: 41 mm

FineLine steering servo mounting plate black for mounting one servo. For standard servo size (40,5 x 20,5mm) FineLine steering servo mounting plate black for mounting one servo. For standard servo size (40,5 x 20,5mm)

1x standard servo CS-9 with JR connector. Dimensions: 41x42x21mm. 4,8-6V voltage. Actuating torque at 4,8V: 80Ncm. Actuating time approx. 0,2sec./60°. Weight 58 g. Accessories: 2 rudder levers and screws. Servo with metal gear.

PWM tester for receiver output. UNI plug. Dimensions: 25x12x10mm. 6gr. CTI product. Signal display with 10 LEDs. This small module can be used to easily check on any RC receiver whether a PWM signal is arriving and with what pulse width. PWM = pulse width modulation - this signal is used to control servos, speed controllers, etc. The pulse width (in ms = milliseconds) determines the position to which the servo arm should be adjusted, for example. The LEDs provide information on how many milliseconds the signal is "long". Illuminated display: Only 1 LED on the far left corresponds to 1,0ms 2 LEDs in the middle correspond to 1,5ms (center position of a servo). Only 1 LED on the far right corresponds to 2,0ms

Servo MD250MW (Hitec). Digital 15mm servo. Dimensions: 35x15x33mm. 31gr. Metal gear. 4,9/8 kgcm. 0,16s/60° Uni/JR connector. Servo is supplied with aluminum servo arm. Magnetic encoder / Hall sensorHighest resolution of the servo travelSuper fine responseProgrammableHigh actuating forceExcellent holding forceMetal gear2 ball bearings MR106/MR8525 toothing on the servo outputServo is supplied with aluminum servo armTechnical data:Acting time: 0,2 sec/60° at 4,8V. 0,16 sec/60° at 6V0,13 sec/60° at 8,4VTriving force: 4,9 kgcm at 4,8V. 6kgcm at 6V. 8kgcm at 8,4V.Dimensions: 35x15x33 mm

SAVÖX Servo SC-1201MG digital servo. Dimensions: 40,7 x 20 x 42,4 mm. 69 grams. Powerful digital servo. Digital Servo Classification: Standard Motor: Coreless Motor Gearbox: Metal Number of Output Pinion Teeth: 25 Housing: Partial Metal/Plastic Number of Ball Bearings: 2 Operating Voltage: 4,8 - 6,0V Actuating Time (sec) to 60 Degrees: 0,15 at 6,0V Actuating Force (kg): 18,0 at 4,8V and 25,0 at 6,0V Weight (g): 69,0 Dimensions L/W/H (mm): 40,7 x 20 x 42,4 Scope of Delivery: Servo including servo arm and mounting screws Application Area: Airplane, car, boat Possible Application Examples: Steering servo in 1/8 scale buggies and truck models, 50s model aircraft, steering axle control of low-loader trailers Packaging: Large blister pack

1x Waterproof servo CS-6 MG with JR connector. Dimensions: 38,5x19x32mm. 4,8-6V voltage. Actuating torque at 6V: 60Ncm. Actuating time approx. 0,2sec./60°. Weight 50 g. Accessories: rudder lever and screws. Servo in low-profile design - when less space is available.