1x servo patch cable 10cm. Both sides JR connector. 0,14qmm. BEIER-Electronic Accessories.

Connection terminal for switching outputs For easy wiring of BEIER UFR-1230, SFR-1, UFR-1230D. AKL-8. Scope of delivery:10-pin connection terminal with spring contacts10-pin flat edge cable, color-coded, approx. 20cm long, with post couplings on both sidesOperating instructions

1 truck sound module SM3 with engine noise depending on speed and driving situation. Compressed air noise, horn, starting, stopping. 7,2-12V 3 watts at 8 ohms. A free receiving channel required! Successor sound module to the previous SMT. Half the size of the predecessor, space-saving installation. 5 engine types selectable! Previous engine types of the SMT and SMX! Reverse warning tone, adjustable idle and full throttle speed. 5 setups for US or European trucks. Mini volume control for hidden installation on the model. Starter and horn are operated using the joystick or button/switch with 3 positions on the transmitter.Wavetable sound synthesis.Can be combined with many speed controllers from other manufacturers (forward-backward controller without braking range).Power is supplied from the drive battery.With battery connector (BEC).Optional sound controller SM-EQ available as an accessory.Dimensions approx. 55x28x13mm.Instructions are available for downloading this article. Downloading is free! (except for your online costs).Recommended loudspeakers with 7,2V supply voltage:Article with 8 ohms: 7028, 9851, 9852, 9854.Recommended loudspeakers with 12V supply voltage:Article 8962.

1x data cable K-USB-2. For live diagnosis, transfer of sound projects. Connection via USB interface. The data cable is NOT required. With the data cable K-USB-2, the sound modules SFR-1, SFR-1-D, USM-HL-2, light modules LM-xx, USM-RC-2 and USM-RC-3 as well as the speed controllers UFR-1230 /UFR-1230-D can be connected to a PC via a USB interface.The data cable has two functions:1. Live diagnosisWith the help of the data cable, the sound teacher can receive and display the current diagnostic data live (e.g. position of the proportional channels, status of the inputs and outputs, nautic values, etc.). This option is very helpful when troubleshooting.Note:The sound modules SFR-xx, USM-HL-2 and USM-RC-x can also save the diagnostic data on the SD card. This recorded data can be viewed without a data cable using the Sound Teacher's diagnostic function. However, the saved values ​​have the disadvantage that you only see the "past" and not what is currently happening (live) on the module. 2. Transferring the configurations and sounds from the Sound Teacher/Drive Teacher to the SFR-x, USM-HL-2, USM-RC-x and UFR-1230/UFR-1230-D modules If a sound or a setting in the configuration is to be changed, the SD card must normally be unplugged from the module, plugged into the PC's card reader, the project data saved to the SD card using the Sound Teacher and the card plugged back into the sound module. However, if changes are made frequently, which occur particularly when the device is first put into operation or when testing new functions, unplugging and plugging can quickly become annoying. Using the data cable, all changes can be easily transferred to the sound module without having to keep re-plugging the SD card. However, transferring sounds using the data cable is relatively slow! A sound that is 10 seconds long takes around 60 seconds to transfer using the data cable. Therefore, transferring long sounds or large, new projects using the data cable is only advisable to a limited extent. The data cable is not absolutely necessary for setting up the sound module, but is often very helpful if you want to work a lot with the various setting options of the sound module.

1x servo patch cable 30 cm. Both sides JR servo connector. 0,14qmm. BEIER-Electronic Accessories.

1x Beier sound module USM-RC-2 WITH DVD. Individually programmable sound, light and movement module. Over 140 finished sound projects. Comes with DVD and instructions. The sound module was specially developed for RC model making in order to create authentic and speed-dependent sounds, extensive lighting options and additional servo movements. Functional scope: -Individually programmable sound, light and movement module -Over 140 finished sound projects with preset and customizable sounds and noises -Use of your own noises, sounds and songs possible -Speed-dependent motor and movement sounds -Optimal sound thanks to powerful amplifier -12 outputs for switching LEDs, lamps, relays etc. -Freely adjustable light sequences, e.g. for an all-round light-2 programmable servo outputs-Easy updating of the sound teacher and the firmware-Easy transfer of all settings via micro SD card The USM-RC-2 sound module is characterized by its high adaptability. All settings are saved on a micro SD card and can therefore be easily changed. All you need is a reader and the "Sound Teacher" software. There are 3 different operating modes: - Digital operation (connection to the receiver) The connection is made using a servo patch cable directly to the receiver and parallel to the speed controller. - Analogue operation (connection directly to the motor) - Mixed operation (combination of digital and analogue operation) These modes are used for speed controllers with special functions, such as cruise control. The speed of the model is measured directly from the motor. The functions can be controlled in various ways. The remote control is assigned using the sound teacher. Sound functions: - Driving and engine sounds for two motors (speed-dependent) - Additional sounds (horns, hydraulic and compressed air noises, etc.) - Random sounds (chain squeaking, animal and ambient noises) Detailed: - Starting noises (cold/warm start) - Stopping noises - Starting noises - Stopping noises - Standing noises - Braking noises - Reversing noises Only up to 2 loudspeakers need to be connected to the sound module. Light functions: The sound module offers 12 switching outputs. The individual outputs can be configured in the Sound Teacher. This enables functions such as frequent flashing, flickering or on/off control. Movement functions: The USM-RC-2 sound module also offers 2 outputs for connecting servos. Technical data: - Supply voltage: 5-14V DC - Quiescent current: approx. 90mA operation: (sound only) max. 3A, (sound and switching outputs) max. 6A-Switching inputs: 5-Switching outputs: 12-Proportional inputs: 4-Proportional outputs: 2 servo outputs-Recommended speakers: 4-8 Ohm-Volume adjustment: Via external potentiometer or remote control-Supported sound data: WAV format 8/16 bit mono/stereo, 22/44kHz-Sound output: 16 bit, mono, 44kHz-Weight: 25g-Dimensions: 66x44x17 mmScope of delivery:-Sound module USM-RC-2-Micro SD card (4GB) + adapter (item 9818)-2 pieces connection cable for speakers (25cm) (item 9814)-2 pieces servo patch cable (30cm) for connection to a receiver, item 9812-Ribbon cable (40cm) for connecting the switching outputs (item 9815)-Fuse holder + fuse 4A (item 9817)-DVD-ROM with software (sound teacher) and sounds-Operating instructions (manual, German)Sounds are available for the following vehicles:-Car - Ford F-350 (V8)-Car - Landrover Discovery TD-Car - Mercedes 320 CDI_1-Car - Mercedes 320 CDI_2-Car - Mercedes C63 AMG-Car - Mercedes G (diesel)-Car - Mercedes Sprinter-Car - V8-Car - VW Bus-Car - VW Golf GTI-Car - VW Beetle-Excavator - Liebherr-Excavator - Volvo-Airplane - Focke Wulf 190-Airplane - Me 109 G10-Airplane - Wright radial engine helicopter - Huey helicopter - Rescue helicopter dump truck - Volvo A25C crawler loader - Caterpillar locomotive - Climax locomotive - Steam locomotive - Steam locomotive_1 locomotive - Diesel locomotive - Electric locomotive - GP38 motorcycle - Harley Davidson tank - Elephant tank - Gepard tank - Gepard_1 tank - Jagdpanther tank - Jagdpanther_1 tank - KV-1 tank - Kanonenjagdpanzer tank - King Tiger tank - King Tiger_1 tank - Leopard 1 tank - Leopard 1_1 tank - Leopard 2 tank - Leopard 2A6 tank - M1 tank - M26 tank - M41 Walker Bulldog tank - MARS tank - Panther tank - Panther G tank - Panther G_1 tank - Panther_1 tank - Panzer III tank - Panzer III_1 tank - Panzer IV tank - Piranha IIIH tank - Sd.Kfz. 7-Tank - Sherman Tank - T-34 Tank - T-55 Tank - Tiger Tank - Tiger_1 Tank - Tiger_2 Tank - Tiger_3 Snowcat - PB300 Snowcat - PB600 Snowcat - PB600_2 Snowcat - Prinoth Beast Wheel Loader - Liebherr Wheel Loader - Liebherr L586 Crawler - DET250 Crawler - Liebherr PR734 Crawler - T100 Ship - Barge Ship - Steamship Ship - Steamship SS

1x volume potentiometer. For BEIER electronic modules. To adjust the volume. Wire length: 20cm. Resistance 100 kOhm. For SFR-1, USM-RC-2, USM-RC-3, USM-xx.

1x Beier sound module USM-RC-2 Individually programmable sound, light and motion module. Over 140 finished sound projects. Delivery without DVD and instructions. The sound module was specially developed for RC model making to create authentic and speed-dependent sounds, extensive lighting options and additional servo movements. Functional scope: - Individually programmable sound, light and movement module - Over 140 ready-made sound projects with preset and customizable sounds and noises - Use of your own noises, sounds and songs possible - Speed-dependent motor and movement sounds - Optimal sound thanks to powerful amplifier - 12 outputs for switching LEDs, lamps, relays etc. - Freely adjustable light sequences, e.g. for an all-round light-2 programmable servo outputs-Easy updating of the sound teacher and the firmware-Easy transfer of all settings via micro SD card The USM-RC-2 sound module is characterized by its high adaptability. All settings are saved on a micro SD card and can therefore be easily changed. All you need is a reader and the "Sound Teacher" software. There are 3 different operating modes: - Digital mode (connection to the receiver) The connection is made using a servo patch cable directly to the receiver and parallel to the speed controller. - Analog mode (connection directly to the motor) - Mixed mode (combination of digital and analog mode) These modes are used for speed controllers with special functions, such as cruise control. The speed of the model is measured directly from the motor. The functions can be controlled in various ways. The remote control is assigned using the sound teacher. Sound functions: - Driving and engine sounds for two motors (speed-dependent) - Additional sounds (horns, hydraulic and compressed air noises, etc.) - Random sounds (chain squeaking, animal and ambient noises) Detailed: - Starting noises (cold/warm start) - Stopping noises - Starting noises - Stopping noises - Standing noises - Braking noises - Reversing noises Only up to 2 loudspeakers need to be connected to the sound module. Light functions: The sound module offers 12 switching outputs. The individual outputs can be configured in the Sound Teacher. This enables functions such as frequent flashing, flickering or on/off control. Movement functions: The USM-RC-2 sound module also offers 2 outputs for connecting servos. Technical data: - Supply voltage: 5-14V DC - Quiescent current: approx. 90mA operation: (sound only) max. 3A, (sound and switching outputs) max.

1x truck sound module SM7 with turbocharger 5 engines, 5 horns to choose from compressed air noise, siren, starting, stopping, gearshift noise. 7,2-12V. 7 watts. Successor to the SMX module! Sound module for truck models - successor to the proven SMX, significantly smallerDynamic turbocharger sound in a class of its own - even closer to the originalDriving situation-dependent engine sound with turbochargerIgnition, starter and shutdown noise, reversing warning tone5 truck horns, compressed air noises, siren5 engines: Actros V6, Scania V8, TGA in-line cylinder, DAF in-line 6-cylinder, Scania in-line 6-cylinderMulti-channel sound synthesisTurbocharger, compressed air, warning tone and switching noises can be set and adjusted separately in volume via Servonaut CARD (available as an accessory)Switching noises and warning tone with K15/30/40/60, reversing warning tone and brake-synchronized compressed air also available with M20+/M24 and S20/S22, function limited with speed controllers from other manufacturersStarter and horn can be operated optionally via switching inputs (Multiswitch) or a receiver channelSound module can be connected directly to an auxiliary motor or servo motor to simulate a power take-off noiseSmall separate volume control ideal for hidden installation on the modelFor 7,2V to 12V loudspeakers from 4 ohmsPower is supplied from the drive batteryWith battery plug (matching counterpart is BECB)Can be combined with SM+ for additional soundsOptional sound control SM-EQ available as an accessoryDimensions approx. 65 mm x 35 mm x 12 mmInstructions are available for download for this article. Downloading is free! (except for your online costs).Recommended loudspeakers with 7,2V supply voltage:Article 6049.Recommended loudspeakers with 12V supply voltage:Article 7028 or 9854.

1 horn for functional models. Realistic horn sound for trucks or construction machines (e.g. excavators). Can be connected directly to the receiver output. Approx. 15x17mm, with M5 thread. Servo cable JR. Electronic horn with the sound of a truck horn. It makes sense to control it via a BUTTON on the transmitter! But of course any other control device (joystick, slider, etc.) can also be used for control. The power supply comes directly from the receiver no additional power supply necessary!

Connection terminal for switching outputs For easy wiring of BEIER UFR-1230, UFR-1230D, SFR-1. AKL-8-W connection terminal with slot for 8 series resistors. With 20cm flat cable

1x 10-pin ribbon cable for BEIER sound module USM-RC-2, USM-RC-3, as well as sound controllers of the SFR series, controllers of the UFR series, light modules LM-BT-16-4, LM-IR-16-4. Length: 100cm.

1x volume potentiometer Mini.BEIER electronic module. For adjusting the volume. Strand length: 20cm. Resistance 100 kOhm. For SFR-1, USM-RC-2, USM-RC, USM-xx. Mini version.

1x speaker cable. For connecting speakers. Suitable for BEIER sound module USM-RC-2. Length: 20 cm.

1x terminal for switching outputs For easy wiring of BEIER USM-RC-2 and 2 EXM.

1x Y-cable with fuse holder for connection to battery and speed controller with TAM plug connection, fuse (4A). For Beier sound module.

Sound controller SM-EQ. Accessory for the sound modules SM3, SM7 and SMB. Allows you to adjust bass and treble for optimal sound. Dimensions: 24x14x8mm. The sound controller remains permanently connected to the corresponding sound module when in use.

1x 10-pin ribbon cable for BEIER sound module USM-RC-2, USM-RC-3, sound speed controller of the SFR series, light modules LM-BT-16-4, LM-IR-16-4. Length: 40cm.

1x fuse holder 4A fuse to protect the Sound Module with a short circuit, Length: 30 cm. For BEIER-Electronic sound module.

1x Beier sound module USM-RC-3 WITH USB stick. Individually programmable sound, light and movement module. Over 140 finished sound projects. Delivered with USB stick and instructions. The sound module was specially developed for RC model making in order to create authentic and speed-dependent sounds, extensive lighting options and additional servo movements. Functional scope: Individually programmable sound, light and movement module Over 140 ready-made sound projects with preset and customizable sounds and noises Use of your own noises, sounds and songs possible Speed-dependent motor and movement sounds Optimal sound thanks to powerful amplifier NF amplifier: 20W 16 outputs for switching LEDs, lamps, relays, etc. Freely adjustable light sequences, e.g. for an all-round light 4 programmable servo outputs Easy updating of the sound teacher and the firmware Easy transfer of all settings via micro SD card The USM-RC-3 sound module is characterized by its high adaptability. All settings are saved on a micro SD card and can therefore be easily changed. All you need is a reader and the "Sound Teacher" software. There are 3 different operating modes: - Digital operation (connection to the receiver) The connection is made using a servo patch cable directly to the receiver and parallel to the speed controller. - Analogue operation (connection directly to the motor) - Mixed operation (combination of digital and analogue operation) These modes are used for speed controllers with special functions, such as cruise control. The speed of the model is measured directly from the motor. The functions can be controlled in various ways. The remote control is assigned using the sound teacher. Sound functions: Driving and engine sounds for the motor (speed-dependent) Additional sounds (horns, hydraulic and compressed air noises, etc.) Random sounds (chain squeaking, animal and ambient noises) Detailed: Starting noises (cold/warm start) Stopping noises Starting noises Stopping noises Standing noises Braking noises Reversing noises Only 1 loudspeaker needs to be connected to the sound module. (4 Ohm/8 Watt is recommended.)Light functions:The sound module offers 16 switching outputs. The individual outputs can be configured in the Sound Teacher. This allows functions such as frequent flashing, flickering or on/off possible. Movement functions: The USM-RC-3 sound module also offers 4 outputs for connecting servos. Technical data: Supply voltage: 5-15V DC Quiescent current: approx. 80mA operating current: depends on volume and switched load Switching inputs: 4 Switching outputs: 16 Proportional inputs: 8 Proportional outputs: 4 Servo outputs Recommended loudspeakers: 4-8 Ohm Volume adjustment: via external potentiometer or remote control Supported sound data: WAV format 8/16 bit mono/stereo, 22/44kHz Sound output: 16 bit, mono, 44kHz Weight: 25g Dimensions: 65x43x17 mm Scope of delivery: Sound module USM-RC-3 Micro SD card (32GB) + adapter (item 9818) 1 piece connection cable for loudspeaker (25cm) (item 9814) 2 pieces servo patch cable (30cm) for connection to a receiver, item 9812 1x ribbon cable (40cm) for connecting the switching outputs (item 9815 1x Fuse holder + fuse 4A (item 9817) USB stick with software (Sound-Teacher USM-RC-3) and sounds Operating instructions (manual, German) Sounds are available for the following vehicles: Car - Ford F-350 (V8) car - Landrover Discovery TD car - Mercedes 320 CDI_1 car - Mercedes 320 CDI_2 car - Mercedes C63 AMG car - Mercedes G (diesel) car - Mercedes Sprinter car - V8 car - VW Bus car - VW Golf GTI car - VW Beetle excavator - Liebherr excavator - Volvo airplane - Focke Wulf 190 airplane - Me 109 G10 airplane - Wright radial engine helicopter - Huey helicopter - Rescue helicopter dump truck - Volvo A25C crawler loader - Caterpillar locomotive - Climax locomotive - Steam locomotive locomotive - Steam locomotive_1 locomotive - Diesel locomotive - Electric locomotive - GP38 motorcycle - Harley Davidson tank - Elefant tank - Gepard tank - Gepard_1 tank - Jagdpanther tank - Jagdpanther_1 tank - KV-1 tank - Kanonenjagdpanzer tank - Königstiger tank - Königstiger_1 tank - Leopard 1 tank - Leopard 1_1 tank - Leopard 2 tank - Leopard 2A6 tank - M1 tank - M26 tank - M41 Walker Bulldog tank - MARS tank - Panther tank - Panther G tank - Panther G_1 tank - Panther_1 tank - Panzer III tank - Panzer III_1 tank - Panzer IV tank - Piranha IIIH tank - Sd.Kfz. 7-Tank - Sherman Tank - T-34 Tank - T-55 Tank - Tiger Tank - Tiger_1 Tank - Tiger_2 Tank - Tiger_3 Snowcat - PB300 Snowcat - PB600 Snowcat - PB600_2 Snowcat - Prinoth Beast Wheel Loader - Liebherr Wheel Loader - Liebherr L586 Crawler - DET250 Crawler - Liebherr PR734 Crawler - T100 Ship - Barge Ship - Steamship Ship - Steamship SS

1 volume control for sound modules from Servonaut with servo cable. 5kOhm linear.

Sound module for wheel loader and crawler SMR. Space-saving installation with 55x28x13 mm. Dynamic, situation-dependent sounds. 7,2 - 12V. 2 free reception channels required! Space-saving installationDynamic, situation-dependent soundsDynamic engine noise, hydraulics, starter, shutdown, horn, dynamic drive chainCan be controlled via two free receiver channelsNo additional battery required, can be powered directly from the drive batteryBattery voltage 7,2 to 12V NiCd/NiMH, loudspeaker from 8 ohmsMaximum output power 3 watts at 8 ohms at 7,2 VSmall, separate volume control ideal for hidden installation on the modelOptional sound control SM-EQ available as an accessoryDimensions in mm approx. 55 x 28 x 13Important: The SMR requires a transmitter with extensive mixing functions to control all functions - at least one free mixer on the sound output for each valve servo channel and, if necessary, another for pump control. Of course, the Servonaut HS12/HS16 meets this requirement, as do transmitters from Brixl, Blauzahn or ScaleART Commander. The SMR may not be usable or may only be usable to a limited extent with transmitters from model aircraft - be sure to check beforehand!

1x Beier sound module USM-RC-3 WITHOUT DVD. Individually programmable sound, light and movement module. Over 140 finished sound projects. Delivery without DVD/instructions. The sound module was specially developed for RC model making in order to create authentic and speed-dependent sounds, extensive lighting options and additional servo movements. Functional scope: Individually programmable sound, light and movement module Over 140 ready-made sound projects with preset and customizable sounds and noises Use of your own noises, sounds and songs possible Speed-dependent motor and movement sounds Optimal sound thanks to powerful amplifier NF amplifier: 20W 16 outputs for switching LEDs, lamps, relays, etc. Freely adjustable light sequences, e.g. for an all-round light 4 programmable servo outputs Easy updating of the sound teacher and the firmware Easy transfer of all settings via micro SD card The USM-RC-3 sound module is characterized by its high adaptability. All settings are saved on a micro SD card and can therefore be easily changed. All you need is a reader and the "Sound Teacher" software. There are 3 different operating modes: - Digital operation (connection to the receiver) The connection is made using a servo patch cable directly to the receiver and parallel to the speed controller. - Analogue operation (connection directly to the motor) - Mixed operation (combination of digital and analogue operation) These modes are used for speed controllers with special functions, such as cruise control. The speed of the model is measured directly from the motor. The functions can be controlled in various ways. The remote control is assigned using the sound teacher. Sound functions: Driving and engine sounds for the motor (speed-dependent) Additional sounds (horns, hydraulic and compressed air noises, etc.) Random sounds (chain squeaking, animal and ambient noises) Detailed: Starting noises (cold/warm start) Stopping noises Starting noises Stopping noises Standing noises Braking noises Reversing noises Only 1 loudspeaker needs to be connected to the sound module. (4 Ohm/8 Watt is recommended.)Light functions:The sound module offers 16 switching outputs. The individual outputs can be configured in the Sound Teacher. This allows functions such as frequent flashing, flickering or on/off possible. Movement functions: The USM-RC-3 sound module also offers 4 outputs for connecting servos. Technical data: Supply voltage: 5-15V DC Quiescent current: approx. 80mA operating current: depends on volume and switched load Switching inputs: 4 Switching outputs: 16 Proportional inputs: 8 Proportional outputs: 4 Servo outputs Recommended loudspeakers: 4-8 Ohm Volume adjustment: via external potentiometer or remote control Supported sound data: WAV format 8/16 bit mono/stereo, 22/44kHz Sound output: 16 bit, mono, 44kHz Weight: 25g Dimensions: 65x43x17 mm Scope of delivery: Sound module USM-RC-3 Micro SD card (32GB) + adapter (item 9818) 1 piece connection cable for loudspeaker (25cm) (item 9814) 2 pieces servo patch cable (30cm) for connection to a receiver, item 9812 1x ribbon cable (40cm) for connecting the switching outputs (item 9815 1x Fuse holder + fuse 4A (item 9817) There are sounds for the following vehicles: -Car - Ford F-350 (V8)-Car - Landrover Discovery TD-Car - Mercedes 320 CDI_1-Car - Mercedes 320 CDI_2-Car - Mercedes C63 AMG-Car - Mercedes G (diesel)-Car - Mercedes Sprinter-Car - V8-Car - VW Bus-Car - VW Golf GTI-Car - VW Beetle-Excavator - Liebherr-Excavator - Volvo-Airplane - Focke Wulf 190-Airplane - Me 109 G10-Airplane - Wright radial engine helicopter - Huey helicopter - Rescue helicopter dump truck - Volvo A25C crawler loader - Caterpillar locomotive - Climax locomotive - Steam locomotive locomotive - Steam locomotive_1 locomotive - Diesel locomotive - Electric locomotive locomotive - GP38 motorcycle - Harley Davidson tank - Elefant tank - Gepard tank - Gepard_1 tank - Jagdpanther tank - Jagdpanther_1 tank - KV-1 tank - Kanonenjagdpanzer tank - Königstiger tank - Königstiger_1 tank - Leopard 1 tank - Leopard 1_1 tank - Leopard 2 tank - Leopard 2A6 tank - M1 tank - M26 tank - M41 Walker Bulldog tank - MARS tank - Panther tank - Panther G tank - Panther G_1 tank - Panther_1 tank - Panzer III tank - Panzer III_1 tank - Panzer IV tank - Piranha IIIH tank - Sd.Kfz. 7-Tank - Sherman Tank - T-34 Tank - T-55 Tank - Tiger Tank - Tiger_1 Tank - Tiger_2 Tank - Tiger_3 Snowcat - PB300 Snowcat - PB600 Snowcat - PB600_2 Snowcat - Prinoth Beast Wheel Loader - Liebherr Wheel Loader - Liebherr L586 Crawler - DET250 Crawler - Liebherr PR734 Crawler - T100 Ship - Barge Ship - Steamship Ship - Steamship SS

1 excavator sound module SMB with speed and work-specific engine noises. Compressed air noise, horn/honk, starting, stopping. 7,2-12V 3 watts at 8 ohms. 2 free reception channels required! -dynamic, situation-dependent noises - engine noise, hydraulics, starter, shutdown, horn, drive chains, superstructure gearbox - can be controlled via 2 free reception channels - no additional battery necessary, supply directly from the driving battery - battery voltage 7,2-12V (10-cell NiMH), loudspeaker from 8 ohms - maximum output power 3 watts at 8 ohms at 7,2 V - small separate volume controls, ideal for hidden mounting on the model - optional tone control SM-EQ available as an accessory Dimensions: 55x28x13mm The SMB requires a transmitter with extensive mixing functions to control all functions - at least. a free mixer per servo channel (sound output). This is of course fulfilled by the Servonaut HS12 as well as transmitters from Brixl, Blauzahn or ScaleART Commander. The SMB cannot be used with transmitters from model aircraft or can only be used to a limited extent - be sure to check beforehand!

Horn 3V 49mm diameter, height 30mm 5681 / 03

1 multi-tone fanfare. Realistic multi-tone fanfare for RC models. Connect directly to the receiver output. Approx. 15x17mm. With M5 thread. Servo cable JR. No additional power supply is required if the module is connected to a receiving channel!

Terminal for switching outputs For easy wiring of BEIER USM-RC-2, 1230 UFR and EXM-2. AKL-10-W terminal with slot 10 series resistors.

1x extension module EXM-2 for the BEIER sound module USM-RC-2. Extension by 6 proportional and 10 switching outputs. At a glance: - 6 additional proportional channels - 10 additional switching outputs - 2 programmable servo outputs - Small motor controller - Easy programming via "Sound Teacher" Description: The extension module EXM-2 is connected to the proportional channel X2/1 of the sound module USM-RC-2 and increases the number of proportional channels by a further 6 channels. With the EXM-2, the sound module can be controlled via a total of 10 proportional channels. There are also 10 additional switching outputs on the EXM-2. Like the 12 switching outputs on the USM-RC-2, these can be assigned any light function and brightness. The EXM-2 contains 2 additional programmable servo outputs, which, like the two servo outputs on the USM-RC-2, can be positioned in up to 4 positions + 1 basic position. As a special feature, the EXM-2 also offers a small motor controller to which a motor for an auxiliary drive (e.g. turret rotation on a tank) can be directly connected. NOT suitable for the SFR-1 sound speed controller!

1 horn for functional models. Realistic horn sound for trucks or construction machines (e.g. excavators). Can be connected directly to the receiver output. Approx. 15x17mm, with M5 thread. Servo cable JR. Extra loud!

1x USB stick "Sound-Teacher USM-RC-3" from Beier. With contents of CD USM-RC-3.

1x Micro SD card 32GB with SD adapter.

1x Y-cable with fuse holder For connection to battery and travel controller With Dean's T-connector, fuse 4A. For Beier sound module. Matching connectors and couplings can be found as article 7835.

1x post connector for 10-pin flat cable, black. Female, 10-pin, with cable guide. Post connector 10-pin IDC, black. Connector type: IDC Connector type: female Number of pins: 10 Connector variant: with cable guide Electrical mounting: IDC Mechanical mounting: for flat cable 10-pin Flat cable pitch: 1.27mm Contact coating: gold flash Contact pitch: 2.54mm Connector output system: 2x5