Go to home page
Wish lists
€ 0,00 *

Filter products

Speakers 4 Ohm 50x50x22 mm
Speakers 4 Ohm 50x50x22 mm
1x speaker 4 Ohm 50x50x25 mm. 88gr. Suitable for USM-RC-2, 10 watts, music output. Small design. LS-4R-10W-50 A suitable speaker housing: Article 9848 (not included).

Available immediately, delivery time: 1-4 days

Product number: 9847

€ 15,95 *
Flat speaker 8 Ohm / 5W. For 12V operation. 90x40x14mm
Flat speaker 8 Ohm / 5W. For 12V operation. 90x40x14mm
1x flat speaker 8 Ohm/5W. For 12V operation. 90x40mm. Depth 14mm. For SMT, SMX and SM7 at 12V and SM3 at 7,2V. Loud89. Dimensions approx. 90x40x14mm. Loudspeaker boxes (not included) are available for this: Item 10826 or 11283 (for high roof) or 10828 (for AROCS high roof).

Available immediately, delivery time: 1-4 days

Product number: 9854

€ 13,70 *
1x mini speaker Visaton 8 Ohm for 12V operation. 50 x
1x mini speaker Visaton 8 Ohm for 12V operation. 50 x
1x Visaton 8 Ohm mini speaker for 12V operation. 50 x 50 mm. Depth 22 mm. Rated power handling 4 W. Loudness 85. Music power handling 10 W. Dimensions approx. 50 x 50 x 25,5 mm. Optionally available (not included): Matching speaker cabinet: Items 9336, 8908 (for high roof), 12893. 5 cm full-range speaker with a square basket, soft surround, and lightweight special cone. Balanced frequency response from 250 Hz and crisp high-frequency reproduction with good omnidirectional characteristics.

Available immediately, delivery time: 1-4 days

Product number: 7028

€ 14,90 *
Speaker case for LS-4R 10W-50
Speaker case for LS-4R 10W-50
1x speaker housing for LS-4R-10W-50 Dimensions: 50x50x24 mm. Suitable for speaker with article number: 9847 (not included). Hole spacing 43mm.

Available immediately, delivery time: 1-4 days

Product number: 9848

€ 10,95 *
1x miniature speaker Visaton 4 ohms
1x miniature speaker Visaton 4 ohms
1x miniature speaker Visaton 4 Ohm for 7,2V operation. 4/8 watts. Diameter 45mm. Matching speaker box: Item 6050, 7814.

Available immediately, delivery time: 1-4 days

Product number: 6049

€ 22,49 *
1x Mini Speaker 16 Ohm, for 12V operation. diameter
1x Mini Speaker 16 Ohm, for 12V operation. diameter
1x mini speaker 16 Ohm, for 12V operation. Diameter 50mm. Depth 18mm. Nominal load capacity 2W. Music load capacity 3W. Particularly suitable in conjunction with SM3 module at 12V. Matching speaker box: Article 9786, 12895.

Available immediately, delivery time: 1-4 days

Product number: 8962

€ 8,50 *
Speakers 8 ohms Dimensions: 67x67x31 mm
Speakers 8 ohms Dimensions: 67x67x31 mm
1x speaker 8 Ohm, dimensions: 67x67x31 mm Suitable for USM-RC-2/-RC-3, 15 watt music output. Weight: 199g. LS-8R-15W-67. Suitable speaker housing: article 9853. (not included).

Available immediately, delivery time: 1-4 days

Product number: 9852

€ 16,95 *
1x speaker Box45-THD, plywood. Approximately 140x95x21mm
1x speaker Box45-THD, plywood. Approximately 140x95x21mm
1x loudspeaker box Box45-THD, plywood. Approx. 140x95x21mm. For European Tamiya driver's cabs. For speakers approx. 45mm. Installation frame kit made of 3mm plywood parts. Suitable for the mini speaker 45 (item 6049). The frame is simply put together and glued. Suitable for driver's cabs (Tamiya) MAN, Volvo, Scania. Frame is screwed into the roof from below. With screws and seal. Loudspeaker is NOT included. Suitable loudspeaker: item 6049.

Available immediately, delivery time: 1-4 days

Product number: 7814

€ 15,99 *
1x Loudspeaker THD89AR, MDF. Approximately 100x89. Kit.
1x Loudspeaker THD89AR, MDF. Approximately 100x89. Kit.
1x loudspeaker box THD89AR, MDF. Approx. 100x89. Kit. -Servonaut-. For loudspeaker 89. For AROCS driver's cab. Installation frame kit made of 3mm MDF material. Suitable for the mini loudspeaker 89 (item 9854). The frame is simply put together and glued. Suitable for the driver's cab (Tamiya) AROCS. Frame is screwed into the roof from below. With screws and seal. Loudspeaker is NOT included.

Available immediately, delivery time: 1-4 days

Product number: 10828

€ 15,99 *
Speakers 4 Ohm 90mm diameter
Speakers 4 Ohm 90mm diameter
1x speaker 4 Ohm 90mm diameter 37mm depth, 25 watt music output Suitable for sound module USM-RC-2/RC-3. Seawater-resistant plastic membrane. LS-4R-25W-90. Weight: 230g. The speaker housing fits this: Article 9850.

Available immediately, delivery time: 1-4 days

Product number: 9849

€ 26,95 *
1x speaker Box45, plywood. Approximately 75x51x30mm
1x speaker Box45, plywood. Approximately 75x51x30mm
1x loudspeaker box Box45, MDF material. Approx. 75x51x30mm. Kit. Box kit made of laser-cut MDF with fastening screws suitable for the mini loudspeaker 45 (item 6049). For better bass reproduction and higher volume. The box is simply put together and glued with superglue, for example. Scope of delivery: Kit without loudspeaker. Dimensions: 75 x 51 x 30 mm

Available immediately, delivery time: 1-4 days

Product number: 6050

€ 9,50 *
1x speaker Box85-THD, plywood. Approximately 140x95x21mm
1x speaker Box85-THD, plywood. Approximately 140x95x21mm
1x loudspeaker box Box85-THD, plywood. Approx. 140x95x21mm. For European Tamiya driver's cabs. For speakers approx. 85mm. Installation frame kit made of 3mm plywood parts. Suitable for the mini speaker 85 (item 7028). The frame is simply put together and glued. Suitable for driver's cabs (Tamiya) MAN, Volvo, Scania. Frame is screwed into the roof from below. With screws and seal. Speaker is NOT included.

Available immediately, delivery time: 1-4 days

Product number: 8908

€ 15,99 *
Speaker case for LS-8R 15W-67
Speaker case for LS-8R 15W-67
1x speaker housing for LS-8R-15W-67 Dimensions: 70x70x35mm. Suitable for speakers: item 9852 (not included).

Available immediately, delivery time: 1-4 days

Product number: 9853

€ 12,95 *
1x Loudspeaker Box89, MDF. Approximately 96x60x24,5mm. Kit.
1x Loudspeaker Box89, MDF. Approximately 96x60x24,5mm. Kit.
1x loudspeaker box Box89, MDF. Approx. 96x60x24,5mm. Kit. -Servonaut-. For loudspeaker 89. Box kit made of laser-cut MDF with fastening screws to match the loudspeaker Laut89 (item 9854)For better bass reproduction and higher volumeThe box is simply put together and glued with superglue, for example.Scope of delivery: Kit without loudspeakerDimensions: 96 x 60 x 24,5 mmSuitable loudspeaker: item 9854.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 10826

€ 12,09 *
Speaker Box16, plywood / MDF. Approximately 96x60x24,5mm
Speaker Box16, plywood / MDF. Approximately 96x60x24,5mm
1x loudspeaker box Box16, plywood/MDF. Approx. 96x60x24,5mm. Kit. -Servonaut-. For loudspeaker 16. Box kit made of laser-cut MDF with fastening screws suitable for the loudspeaker Laut16 (item 8962)For better bass reproduction and higher volumeThe box is simply put together and glued with superglue, for example.Scope of delivery: Kit without loudspeakerDimensions: 96 x 60 x 24,5 mm

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9786

€ 12,00 *
1x Loudspeaker Box-THDFH, MDF. Approximately 100x100x3mm. For euro
1x Loudspeaker Box-THDFH, MDF. Approximately 100x100x3mm. For euro
1x speaker box, MDF. Approx. 100x100x3mm. For the European cab of the Volvo FH16 from Tamiya. Suitable for the Laut45/85/89.1 speakers. 100x speaker box, MDF. Approx. 100x3x16mm. For the European cab of the Volvo FH45 from Tamiya. Suitable for the Laut85/89/45 speakers. Installation frame kit made of laser-cut MDF. Suitable for the Mini Speaker 6049 (item 7028). Also suitable for the speakers 10826 and 16. The frame is simply screwed into the roof. Suitable for the driver's cab (Tamiya) Volvo FH770 and Scania 6049S. With screws and seal. Speaker is NOT included. Suitable speakers: items 7028, 10826, 9854, XNUMX.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 11535

€ 15,99 *
1x speaker Box85, plywood. Approximately 96x56x30mm.
1x speaker Box85, plywood. Approximately 96x56x30mm.
1x loudspeaker box Box85, plywood. Approx. 96x56x30mm. Kit. -Servonaut-. For loudspeaker 85. Box kit made of laser-cut MDF with fastening screws suitable for the loudspeaker Laut85 (item 7028)For better bass reproduction and higher volumeThe box is simply put together and glued with superglue, for example.Scope of delivery: Kit without loudspeakerDimensions: 50 x 50 x 25,5 mm

Available immediately, delivery time: 1-4 days

Product number: 9336

€ 12,09 *
Loudspeaker box Box89Mini, plastic Approx. 90x40x13mm
Loudspeaker box Box89Mini, plastic Approx. 90x40x13mm
1x speaker box Box89Mini, plastic approx. 90x40x13mm. Very compact dimensions. Housing incl. screws. Matching speakers: Article 9854

Available immediately, delivery time: 1-4 days

Product number: 12894

€ 7,95 *
SFR-1 sound drive controller from BEIER. Especially for trucks
SFR-1 sound drive controller from BEIER. Especially for trucks
1x SFR-1 sound speed controller from BEIER. Specially developed for trucks. 16 switching outputs for lighting. Can be set using the Sound Teacher SFR software. WITH CD-ROM/DVD or USB stick Speed ​​controller for DC brush motor, sound module and light control module in one! Also suitable for bell-armature motors! Specially developed for trucks. Powerful BEC with 5,6V 3A. Optional load control, cruise control and brake function. Can be set in great detail using the -Sound Teacher SFR-. The speed controller is characterized by its high sensitivity. The controls are very realistic and dynamic and guarantee absolute driving fun. Thanks to a wide range of setting options, the speed controller can be easily and individually adapted to the most diverse model requirements and driving characteristics. All settings are made using the -Sound Teacher SFR- - the convenient configuration program from BEIER-Electronic. The model's lighting can be connected directly to the speed controller using the 16 light outputs. The speed controller has an extra output for connecting the IR transmitter diode for the light module SM-IR-16-2. (Article 9810). Features: - Supply voltage: 6-18V - Max. Motor current 30 A (continuous) 60 A (short-term) - PWM clock frequency 20 or 40 kHz - 16 switching outputs for the lighting - Powerful BEC 5,6 V 3 A - 6 proportional inputs (throttle, steering, control, sound, light) - 2 proportional outputs (servo outputs) - Failsafe in the event of reception interference (engine stop) - Start-up protection when switched on - Battery voltage monitoring - Temperature monitoring - Short-circuit protection for motor output stage - Short-circuit protection for BEC - Short-circuit protection switching outputs Can be selected via Sound Teacher SFR: - Load control on/off - Cruise control on/off - Braking function on/off - Handbrake function on/off - Selection of battery type: LiPo/ other type - Learning function (setup) for throttle channel on/off Can be set via Sound Teacher SFR (K-USB-2 required!):-Firmware update-Diagnosis-Channel inversion-Shutdown of undervoltage monitoring-Reduction of reversing speed-Selection of PWM clock frequency-Activation/setting of mass inertia-Activation/setting of steering inertia-Setting of handbrake hardness-Setting of throttle curve-Configuration of switching outputs (output type, brightness, xenon)-Configuration of light switch-Configuration of control channelThe speed controller is delivered with a standard configuration and is ready for use!-Battery connection 2x 1,5qmm, 25cm long, DEANS T-plug-Motor connection 2x 1,5qmm, 25cm long-2x servo cable for connection to receiver, 30cm long-Connection cable for loudspeaker, 25cm long-Cable for standby switch or volume potentiometer, 25cm-1x ribbon cable 40cm for connecting the switching outputs-Micro SD card (4GB) plus adapter-DVD with Sound-Teacher SFR-1 or USB stick (from 8/2024)-Manual SFR-1technical data:-Dimensions: 80 x 47 x 23 mm-Weight: 86g

Available immediately, delivery time: 1-4 days

Product number: 9850

€ 14,95 *
Speakers 8 ohms Dimensions: 68x53x34 mm
Speakers 8 ohms Dimensions: 68x53x34 mm
1x Speaker 8 Ohm, Dimensions: 68x53x34 mm Suitable for USM-RC-2, 8 Watts music performance. Weight: 145gr. LS-8R-8W-50

Available immediately, delivery time: 1-4 days

Product number: 9851

€ 15,95 *
1x Loudspeaker Box16-THD, plywood. Approximately 140x95x21mm. fo
1x Loudspeaker Box16-THD, plywood. Approximately 140x95x21mm. fo
1x loudspeaker box Box16-THD, plywood. Approx. 140x95x21mm. For European Tamiya driver's cabs. For speaker 16. Installation frame kit made of 3mm MDF material. Suitable for the mini speaker 16 (item 8962). The frame is simply put together and glued. Suitable for driver's cabs (Tamiya) MAN, Volvo, Scania. Frame is screwed into the roof from below. With screws and seal. Speaker is NOT included.

Available immediately, delivery time: 1-4 days

Product number: 10827

€ 15,99 *
Loudspeaker box Box85Mini, plastic Approx. 50x50x25mm
Loudspeaker box Box85Mini, plastic Approx. 50x50x25mm
1x speaker box Box85Mini, plastic approx. 50x50x25mm. Very compact dimensions. Housing incl. screws. Matching speakers: Article 7028

Available immediately, delivery time: 1-4 days

Product number: 12893

€ 8,95 *
Loudspeaker box Box16Mini, plastic Approx. 52x52x23mm
Loudspeaker box Box16Mini, plastic Approx. 52x52x23mm
1x speaker box Box16Mini, plastic approx. 52x52x23mm. Very compact dimensions. Housing incl. screws. Matching speakers: Article 8962

Available immediately, delivery time: 1-4 days

Product number: 12895

€ 9,95 *
1x Loudspeaker THD89, MDF. Approximately 140x95x21. Kit.
1x Loudspeaker THD89, MDF. Approximately 140x95x21. Kit. -Servonaut-. For speakers 89. Speaker is not included!

Available immediately, delivery time: 1-4 days

Product number: 11283

€ 15,99 *
Flat speaker 8 Ohm / 4W. For 12V operation. 61x42x13mm
Flat speaker 8 Ohm / 4W. For 12V operation. 61x42x13mm
1x Flat speaker, 8 ohms/4W. For 12V operation. 61x42mm. Depth 13mm. For SMT, SMX and SM7 at 12V and SM3, SMB, SMR at 7,2V. Laut80. Dimensions approx. 61x42x13mm. Weight: 34g.

Available immediately, delivery time: 1-4 days

Product number: 13557

€ 15,10 *