CARSON Reflex Stick Multi Pro LCD 2,4GHz remote control with 14 channels. 14-channel transmitter, 14-channel receiver and manual. With 15 model memories. Reflex Stick Multi Pro LCD - Professional, modern and technically high-quality 14-channel remote control system with 15 model memories for universal use in many RC vehicles and ships. 14 channels can be controlled independently via 2 joysticks and 10 switches (4x buttons / 4x step switches / 2x rotary potentiometers), for example functions such as light / sound, horn, cable winch, support legs, water pump and fire monitor.The REFLEX STICK Multi Pro 14 Channel LCD System is fully compatible with the MFC 01/03 and DMD unit from TAMIYA. Scope of delivery:14 channel 2.4 GHz transmitter, 14 channel 2.4 GHz receiver and multilingual manual.Required accessories:4x Mignon AA cells. Mignon battery set article 9492Recommended accessories:500503060 Reflex 6 / 14Ch Switch 2 (2x2.5A, max. 16V)500503061 Reflex 6 / 14Ch Switch 4 (4x2.5A, max. 16V)500503062 Reflex Switch 2/4 power distributor500606073 Plug-in charger (item 10723)Transmitter charging cable: item 9673500501544 Receiver500609042 Mignon battery set (AA)Technical data:- Operating voltage transmitter 4,8 - 6 V (4 AA cells)- 2.4G FHSS system (Frequency HoppingSpread Spectrum)- 2.4G servo reverse (reversal of the direction of rotation) and trim function for channels- 4x buttons ON/OFF/ON, 4x switches ON/OFF/ON, 2x rotary potentiometers- Power supply for the receiver 4,8 - 6 V- Plug system Graupner J/R- Dual Rate channel 1-4 (servo travel limitation)- EPA channel 1-4 (servo travel limitation)- ABS function channel 1-4 (Stutter brake)- EXP function channel 1-4 (exponential)Technical details:- 14 controllable channels- 15 model memories- Includes charging socket- 100% compatible with TAMIYA MFC 01/03 and DMD unit- Blue illuminated LC displayIt is not possible to bind several receivers at the same time with this system.Receivers that can be used with this system:Article 11259, 4-channel receiverArticle 12422, 4-channel receiver, waterproofArticle 12421, 5-channel receiverArticle 12420, 5-channel receiver, waterproof

2,4GHz receiver with 9 servo channels. RX9. Partner capable. Supports up to 2 multi-switch or multiprop modules. Servo outputs can be switched on/off remotely. Monitoring of driving voltage without accessories. This receiver of the latest generation is the successor to the previous Servonaut receivers R9 and R12 and is of course completely compatible. This receiver can be expanded to 12 or 16 channels and can be linked to TWO HS-12/HS-16 transmitters. This makes it easy to hand over a model. Receiver 55x28x9mm (without antenna). Antenna length 13cm.Note:The multiswitch/multiprop systems from Robbe and Graupner are supported by this receiver.Supply voltage: 4,8 - 7,4VBattery monitoring: for NiCd/NiMH 6 or 10 cells, LiPo/LiFePo 2 to 4 cells.Servonaut receiver of the latest generation (2018).To match this RX9 receiver, inexpensive channel extensions to 12 or 16 channels are offered.Extension by 3 channels (so 12 channels in total): article 11137Extension by 7 channels (so 16 channels in total): article 11138Extended settings possible via CARD (article 9096) or the HS-12 and HS-16 transmitters.

1x 2,4GHz receiver with 14 channels. For CARSON Reflex-Stick MULTI PRO 14 LCD. This item is NOT compatible with the Reflex-Stick MULTI-PRO 14! This receiver only fits the CARSON Reflex PRO 14 LCD! Dimensions: 52 x 32 x 13mm

1x 2,4GHz remote control with 14 channels. CARSON Reflex-Stick Multi Pro 14. 14-channel transmitter, 14-channel receiver and manual. Modern, technically high-quality 14-channel remote control for universal use in many RC vehicles and ships. 14 independent channels can be controlled via 2 joysticks, 10 switching channels (5x switches, 5x buttons). The system is fully compatible with the MFCs (multi-function controllers) and the DMD units.Technical data:Transmitter operating voltage 4,8-6VFrequency system 2,4GHzServo reverse and trim function for all joystick functionsCharging socket (positive pole inside)Receiver operating voltage 4,8-6VServo plug system: UNI (Graupner-JR)Rechargeable batteries are not included!We recommend using rechargeable batteries with low self-discharge. E.g. battery pack item 9492.Available from stock!Suitable charging cable (not included): item 9673.Suitable simple charger (not included): item 10723. Switch/button on the transmitter:Left:5x buttons with middle position. (on) - middle(off) - (on)Right:5x switches with middle position. on - middle(off) - on

BEIER Electronic Multiswitch Converter MSC-8-C-LCD. With the multiswitch converters MSC 8-C-LCD, the signals from 8 switches of the CARSON Reflex Stick MULTI PRO LCD 14 channel can be combined and transmitted collectively.The Reflex Stick MULTI PRO LCD 14 channel from CARSON-MODEL Sport is an inexpensive but fully equipped and technically high-quality 14-channel remote control system for universal use in many RC vehicles and ships. The MSC are plugged directly onto the receiver of the CARSON Reflex Stick MULTI PRO LCD 14 channel and transmit the states of 8 switches of the remote control via only one proportional channel to the sound module USM-RC-2, USM-RC-3, SFR-1 or to the UFR-1230 of the UFR series.In this way, 8 switches can be used to control various functions of the sound module or the speed controller.Technical details: MSC -8-C-LCDEvaluates 8 switchesChannels 5, 6 and 9 - 14 are connected to the receiver via the MSC-8-C-LCD occupiedChannels 1 - 4, 7 and 8 of the receiver remain free.All MSCs have dimensions (without receiver) of: 24 x 32 x 12 mm.Scope of delivery:Multiswitch converter moduleServo patch cable (30 cm )Instruction manual (German)Attention: Remote control and receiver are not included in delivery!The MSC modules work with these items:Sound speed controller SFR-1Double sound speed controller SFR-1-Double sound speed controller SFR-1-HLSound module USM-RC-2Sound module USM -RC-3Speed ​​controller UFR-1230Dual speed controller UFR-1230-D

1x 2,4GHz receiver with 14 channels. For CARSON Reflex-Stick MULTI PRO 14. This item is NOT compatible with the Reflex-Stick MULTI-PRO 14 LCD!

1x 2,4GHz remote control with 6 channels. CARSON Reflex-Stick II. 6-channel transmitter, 6-channel receiver and manual. VERSION II. VERSION II. NOT compatible with version 1! Modern, technically high-quality 6-channel remote control for universal use in many RC vehicles and ships. 6 independent channels can be controlled via 2 joysticks, 1x 2-way button and 1x 3-position switch. The system is fully compatible with the MFC (multi-function controller) and the LR-634 electronic unit.Technical data:Transmitter operating voltage 4,8-6VFrequency system 2,4GHzServo reverse and trim function for all joystick functionsCharging socket (positive pole inside)Receiver operating voltage 4,8-6VServo plug system: UNI (Graupner-JR)Rechargeable batteries are not included!We recommend using rechargeable batteries with low self-discharge. E.g. battery pack item 9492.Suitable charging cable (not included): item 9673.

4 single battery cells, Eneloop 2000mAh, without soldering tag, NiMH, HR-3U, mignon size. Very low self-discharge. Ideal for the remote control transmitters Carson Reflex items 9348, 9494 and 10326! The Eneloop cells have very low self-discharge - ie even if the transmitter is not used for a long time, the battery charge only decreases very slightly!

1x 2,4GHz receiver with 6 channels. For CARSON Reflex-Stick II. NOT compatible with Reflex-Stick Version 1!

Channel extension R+3 for 3 servo channels. This module extends the RX9 receiver to 12 channels. This receiver extension of the latest generation is the successor to the previous Servonaut receivers R9 and R12 and is of course fully compatible.Extension module: 46x19x9mmServos are also supplied by the RX9.The soldered 15cm connection cable allows flexible positioning of the module.Planned delivery time for this article: end of August 2018.Suitable for the RX9 receiver (article 11136)

Channel extension R+7 for 7 servo channels. This module extends the RX9 receiver to 16 channels. This receiver extension of the latest generation is the successor to the previous Servonaut receivers R9 and R12 and is of course fully compatible.Extension module: 52x19x9mmSeparate BEC supply for the additional 7 channels required.The connection cable to the RX9 allows flexible positioning of the module.Planned delivery time for this article: end of August 2018.Suitable for the RX9 receiver (article 11136)

BEIER-Electronic Multiswitch Converter MSC-10-C. For Multi-Pro14. With the MSC 10-C multiswitch converters, the signals from 10 switches of the CARSON Reflex Stick MULTI PRO 14 channel can be combined and transmitted collectively.The Reflex Stick MULTI PRO 14 channel from CARSON-MODEL Sport is an inexpensive but fully equipped and technically high-quality 14-channel remote control system for universal use in many RC vehicles and ships.The MSC is plugged directly onto the receiver of the CARSON Reflex Stick MULTI PRO 14 channel and transmits the states of 10 switches of the remote control via just one proportional channel to the sound module USM-RC-2, USM-RC-3, SFR-1 or to the UFR-1230 of the UFR series.In this way, 10 switches can be used to control various functions of the sound module or the speed controller.Technical details: MSC-10-CEvaluates all 10 switchesChannels 5 - 14 of the receiver are connected to the MSC-10-C occupied.Channels 1 - 4 of the receiver remain free.All MSCs have dimensions (without receiver) of: 24 x 32 x 12 mm.Scope of delivery:Multiswitch converter moduleServo patch cable (30 cm)Instruction manual (German)Please note: Remote control and receiver are not included in delivery!The MSC modules work with these items:Sound speed controller SFR-1Double sound speed controller SFR-1-Double sound speed controller SFR-1-HLSound module USM-RC-2Sound module USM-RC-3Speed ​​controller UFR-1230Double speed controller UFR-1230-D

1 transmitter console for HS-12/16 handheld transmitter, black. Kit with foldable strap brackets. Console for Servonaut handheld transmitter HS12/HS16 in grey. Kit with all required parts (additional tools required) No gluing required Is securely screwed to the transmitter Strap brackets can be folded Hand rest with foam rubber surface Low weight, only 400g without transmitter Dimensions with HS12/HS16 transmitter: 325 x 235 x 100mm

1 carrying strap for desk/desk transmitter. Black. With embroidered Servonaut logo. Padded neck support. Carrying strap 25mm. Adjustable length.

2,4GHz receiver with 6 servo channels. Supports model shutdown and telemetry. Servo outputs can be switched on/off remotely. ZWO4-R6. Receiver 54x19x10mm (without antenna). Antenna 13cm. 2.4 GHz receiver with 6 servo channels Monitoring of the drive battery voltage is possible without additional accessories (telemetry). Supply voltage: 4,8 to 7,4 V Battery monitoring: for NiCd / NiMH 6 or 10 cells, LiPo / LiFePo 2 to 4 cells Can be set via CARD: channel shift when used as a secondary receiver Note: The multi-channel / multiswitch / multiprop systems are not supported by this receiver Dimensions: Receiver 54 x 19 x 10 mm, antenna length 13 cm

FlySky PL18 EV 4D 18-channel Paladin PL18 computer remote control flagship edition. Aluminum transmitter console, 12-channel receiver, wireless charging station, 8-channel receiver, aluminum case. FlySky Paladin PL18 EV 4D Flagship Edition 18-channel computer remote controlSoftware and manual in German.The 18-channel FlySky Paladin PL18 EV with touch display and 4D joysticks is available from us in the exclusive and unrivalled Flagship Edition - that means the full package without being overly ambitious! Incl. Wireless charging station, aluminum transmitter console, 12-channel receiver + additional 8-channel receiver in a high-quality aluminum case. One thing is important for functional models - namely, a lot! Full control and a realistic operating scenario via factory-fitted self-centering 4D joysticks that are CNC-milled from high-quality aluminum, our own self-centering sensors for track drives (ergonomic and of course also made of aluminum), 2- and 3-position toggle switches in industrial quality, pressure switches (e.g. for hydraulic pump or light) and 3 rotary encoders (next to the rotary encoders on the 4D joysticks). But these are just the physical controls! The PL18 EV is at its best when the capacitive touch display comes into play. Bring the encoders to life using the simple, gesture-customizable user interface, where you can even control the content of the main screen. The channels can be freely assigned to the sensors as well as the 8 trim slide knobs, the rotary encoders and buttons. And so that you always have an overview, the channel even gets the name you have chosen, not a cryptic "CH3" but "Spoon" is written on the main screen, under the bar that shows which position the channel is currently in - full control! Trim, subtrim, channel offset, curve adjustment and linear mixer are mandatory on the PL18 EV. Tracked vehicles can be configured using the track mixer, and logic switches can be used to create logic connections. Simple example: Switch 1 on + Switch 2 on = Channel 3 on. In practice, this means, for example: crane folded up, hook attached? Upper carriage can no longer rotate! Supports above? Nobody is craned here yet!Having only one model is not a possibility for us model building enthusiasts! And anyone who has an excavator and a dump truck would prefer to first load the material into the dump truck and then drive it away, dump it and then load it again. With the PL18 EV you can do this easily via the model combination. Change the model live using a 2-position switch, and the programmed failsafe (in the transmitter, mind you, using a touch display, without the need for a bent paper clip) puts the passive model into standby, and the truck can be controlled using the transmitter configuration assigned to it. Back at the excavator you then control it again with the usual Euro assignment. 20 models can be saved with their own configuration. You will see your model collection with new eyes! With the 2 included receivers (1x 12-channel, 1x 8-channel) you get started with two options - either remote control 2 models or one model with up to 18 channels - for this the receivers are coupled and create an 18-channel receiver. The large receiver serves the small one via i-Bus as a PWM converter, i.e. channel extension. Communication is via the new bidirectional AFHDS3 radio system in 2.4GHz. Bidirectional means: data transmission in both directions, simultaneously via a single antenna and connection. Receiver voltage, range detection included, external sensor data possible - full control!Aprospros - full control on the model building site also means having the remote control under control, precise control, even over longer periods of time. This is where the included CNC-milled transmitter console with official cross strap comes into play. The ergonomic hand rests allow you to control the sticks and controls precisely and carefully. From now on, dig like a heart surgeon! And so that you always have full power, you can charge the built-in battery of the PL18 EV inductively. Simply place it on the 5V10W wireless charging station of the Flagship Edition, where you can of course also charge your smartphone. For functional models, one thing is not important - everything else! That's why the PL18 EV has omitted everything that a functional model builder doesn't need. No flight mixers, no occupancy set in stone. This system is only for trucks, construction machinery, tanks and work vessels such as pushers, floating cranes, floating dredgers, buoy layers!Scope of delivery Transmitter Paladin PL18 EV fully assembled, battery permanently integrated Receiver FGr12B Receiver FGr8B Wireless Charging Charging station incl. Micro-USB to USB cable Transmitter console kit Aluminum case Protective film for display Instructions (German exclusively from thicon partners) Receiver link cable Voltage sensor cable for both receivers Alternative handle recesses Technical specifications Number of channels: 18 Compatible receivers: Receiver with AFHDS3 Models: Trucks, construction machinery, ships Frequency: 2,4GHz Transmission power: <20dbm Radio system: AFHDS3 Permissible range: <300m (open area) Cable resolution: 4096 Battery: 1S Lithium Polymer 3,7V - 4.000nAh (permanently installed) Charging connection: Micro-USB / Wireless Charging 10W Charging time: 4h at 5V/2A or 7h at 5V/2A Wireless Estimated operating time/full charge: approx.

2,4 GHz receiver with 4 servo channels. Supports model shutdown and telemetry. Servo outputs can be switched on/off remotely. ZWO4-R4. Receiver 49x19x10mm (without antenna). Antenna 14cm. 2.4 GHz receiver with 4 servo channels. Monitoring of the drive battery voltage is possible without additional accessories (telemetry). Supply voltage: 4,8 to 7,4 V Battery monitoring: for NiCd / NiMH 6 or 10 cells, LiPo / LiFePo 2 to 4 cells Can be set via CARD: Channel shift when used as a secondary receiver. Note: The multi-channel / multi-switch / multi-prop systems are not supported by this receiver. Dimensions: receiver 49 x 19 x 10 mm, antenna length 14 cm.

Servonaut bind button for the Servonaut receivers RX9, R4, R6. Bind button for the receivers RX9, R6, R4Replaces the "Bind" jumper on the receiverAllows convenient binding of the receiver even when installedWith fastening nut, cable length 13cm

BEIER Electronic Multiswitch Converter MSC-8-C. With the MSC 8-C multiswitch converters, the signals from 8 switches of the CARSON Reflex Stick MULTI PRO 14 channel can be combined and transmitted collectively. The Reflex Stick MULTI PRO 14 channel from CARSON-MODEL Sport is an inexpensive but fully equipped and technically high-quality 14-channel remote control system for universal use in many RC vehicles and ships. The MSC is plugged directly into the receiver of the CARSON Reflex Stick MULTI PRO 14 channel and transmits the states of 8 switches of the remote control via just one proportional channel to the sound module USM-RC-2, USM-RC-3, SFR-1 or to the UFR-1230 of the UFR series. In this way, 8 switches can be used to control various functions of the sound module or the speed controller. Technical details: MSC-8-C Evaluates 8 switches Channels 5, 6 and 9 - 14 are occupied by the MSC-8-C on the receiver. Channels 1 - 4, 7 and 8 of the receiver remain free. All MSCs have dimensions (without receiver) of: 24 x 32 x 12 mm.Scope of delivery: Multiswitch converter module Servo patch cable (30 cm) Operating instructions (German)Attention: Remote control and receiver are not included in delivery!The MSC modules work with these items: Sound speed controller SFR-1 Double sound speed controller SFR-1-D Double sound speed controller SFR-1-HL Sound module USM-RC-2 Sound module USM-RC-3 Speed ​​controller UFR-1230 Double speed controller UFR-1230-D  

1 MC-28HoTT computer remote control transmitter, 16-channel, Graupner. HOTT system 2,4GHz. 16 control functions, 120 model memories. 2 4D joysticks, 10 switches/buttons, 2 proportional sliders. Four-dimensional perfection - The Graupner remote control mc-28 HoTT with 4D control sticks is designed for the functional model builder who needs additional functions on the control stick. The 4D control sticks have an additional button that can be defined as a button or switch in the software and a self-neutralizing potentiometer. This can be used, for example, to control the camera inclination and direction of a cameracopter or a crane boom. The mc-28 is suitable for almost all models. 16 control functions, 2 channels can be reprogrammed to multi-channel functions so that numerous additional switching tasks can be handled, 120 internal model memories, integrated telemetry and voice output as well as the fast and safe bi-directional transmission of the Graupner HoTT 2,4 GHz technology make the mc-28 a true all-rounder. The mc-28 remote control has an internal circular polarized patch antenna with a very high range and reliability. Two large, high-contrast displays provide information about telemetry data and parameters at all times and enable quick and easy programming. The switches and buttons on the remote control can be freely assigned and thus individually adapted. 12 mixers are available for programming. 8 switching phase programs with announcement function can be adapted and named for each model. Thanks to the micro SD card and micro USB interface, telemetry data and model memory can be imported and exported. Upgrades to the computer system are also carried out in this way.Built-in Bluetooth v2.1+ EDR module with 115200 baud for the Graupner HoTT Viewer for Android application (firmware >=2.2) for displaying telemetry data on the mobile phone and for voice output via the mobile phone.The voice output can be set to be output individually at a time.The warnings can be defined in the mobile phone.A Bluetooth® v2.1+ EDR headset can also be connected directly without a smartphone.The latest software and firmware can be found in the -Service/Help- section under -Updates- at www.graupner.de.Age recommended by the manufacturer: From 14 yearsProduct featuresCircularly polarized patch antenna4D joystickVibration alarmsCharging via MicroUSB with charging indicator via LEDModel types: model aircraft, helicopter, copter, vehicle, boatVoice output by pressing a switch or when changing (flight) phases with a selection of over 400 voice outputs and up to 40 user-definable voice outputsUp to 10 user-definable warning messages10 different vibration alarms for telemetry warnings, timer, RF signal, voltage alarmReturn channel speed adjustable for towing operation or camera copter with multiple transmitters and receivers in the modelMusic player can be started/stopped via programmable switchBidirectional communication between transmitter and receiverWireless L/S function5 different languages ​​(German, English, French, Italian, Spanish) possible via software update. Availability of the corresponding language: see download area. Storage of telemetry data with date and timeServo cycle times for digital servos can be selected from 10ms.Ultra-fast response times through direct and reliable transmission of data from the main processor to the 2.4 GHz transceiver. No additional delays due to detours via a module processor.Operation and programming based on the proven concepts of the mc-32A high-contrast blue illuminated graphic display ensures perfect control of the setting parameters such as model type, model memory, clocks and operating voltage.16 control functions2 control functions for multi-channel functions programmable with 8 (16) switching functions each.Free assignment of all switches120 model memories10 switches/buttons and 2 slide controls as well as 2 side rotary encodersMode 1 to 4 freely selectableCAP-TOUCH control panels with key-lock function to prevent unintentional operation.Numerous telemetry, programming and evaluation functions directly in the transmitter displayVoice output can be called up via freely programmable switchesExtensive programs for fixed-wing and helicopter modelsSwitch monitor for controlling all switches and control switches12 mixers, freely programmable for fixed-wing models and helicopters, each with freely selectable input and output functions, including 4 curve mixers with 5-point curve technology in 1% steps, making it easy settable and adjustable curve values ​​for max. 5 points for throttle, pitch, tail or other nonlinear adjustment ranges. The CPU computer uses a sophisticated polynomial approximation method to calculate a real, rounded, ideal MPC (multi-point curve) mixer curve. 8 phase programs with announcement function can be individually adapted and given names for each model, the switching time can be programmed separately. SUPER SERVO menu with a perfect overview of all servo setting data and simple parameter correction for 4 levels (direction of rotation, center position, separate servo travel on both sides and separate travel limit on both sides for 16 servos with a total of 96 setting options) SUPER DUAL RATE, EXPO menu with 36 possible setting variants, for 3 servo functions and 6 flight phases. Practically optimized multi-function menus for wing and helicopter models. Entering the number of aileron and flap servos automatically programs all required mixer functions in the multifunction wing menu. Differential aileron mixer, butterfly mixer, dual flap mixer, automatic gyro set function and other special functionsHeli swashplate mixer for 1-, 2-, 3- or 4-point control. Fail-safe monitor for 16 servo functionsConvenient clock menu. Stopwatch system, alarm timer, countdown timer, lap counter, etc. 2 time and 1 lap/time value can be displayed.Stop watch with history: In addition to the lap counter, there is a time 1 that records the switch-on times and a time 2 that records the ON and OFF switching times separately.Transmitter operating time timer is automatically set to zero by the transmitter's battery charging process.Switch assignment of the flight phase switches: Now 6 switches, 2 of which have a priority function. The name of each switch combination can be freely chosen. This means that the number of flight phases is independent of the number of flight phase switches.Included in the set:Graupner HoTT mc-28 desk transmitter, 16-channel with built-in 6000 mAh LiPo transmitter batteryUpdate cablemicro SD cardAluminum caseHand restsNeck restTransmitter strapBluetooth® v2.1+ EDR moduleFeatures:Linearization of swashplate servos: Electronic compensation of the non-linear path of swashplate rotary servos.Tail type normal, V-tail, delta/flying wing, 2 HR Sv 3+8 (this immediately provides 2 interconnected elevator servos without the use of free mixers/cross mixers)Number of flaps up to 4 AIRL/4 WK: Full support of 8 wing servos, now also without the use of free mixers.Switchable flight phase switching delay: The delay time can be switched off for individual channels for each flight phase (e.g. B. for engine off on electric models or head-lock activation/deactivation (helicopter).16 phase namesSurface mixer: Newly designed multi-flap menu for the simplest settings of up to 8 surface servos, flight phase-specific, in a clear manner, even without the use of free mixers.Number of flight phases: (surface: 8, helicopter: 7 + AR)Phase trimSwitchable snap-flap mixer HR->WK with new offset function for easy course corrections and quick turns3 ring limiters for Voith-Schneider drives and similarChannel sequencer for 3 channels for folding engines and landing gear flapsLogical switchesTrim memoryMulti-channel function for channel expansion for up to 14 additional channelsMusic player and internal loudspeaker for voice output and musicSwapping the servo assignment at the receiver output on the transmitter side and receiver sidePPM signal adjustable at the data outputGeneral HoTT features:Simple and extremely fast bindingRange test and warning functionLow voltage warningExtreme Wide receiver operating voltage range from 3,6 V to 8,4 V (functional up to 2,5 V) Failsafe, free channel assignment (channel mapping), mixing functions and all servo settings are easily programmable with the internal telemetry 4) mRange test and warning functionUndervoltage warningExtremely wide receiver operating voltage range from 10 V to 200 V (functional up to 75 V)Numerous fail-safe functionsKey lock function to prevent menus from being accidentally changedPrecision:Shorter response times can be set (3000ms period time)No additional delays due to module processors. The entire hopping management is carried out directly by the 32-bit main processor. Synchronous servo operation possible by simultaneously controlling the servo outputs in blocks of 4 Pilot feeling: Largely delay-free control reactions through direct processing Telemetry evaluation in real time Optional voice output of the clocks, telemetry data and warnings via headphone output Repeat function and further function of the voice output programmable via freely assignable switches Pre-selection of voice outputs Separately adjustable volume for beeps and voice output Integrated telemetry display with 8 x 21 characters or 128 x 64 dots, optionally in text or graphic form Duration of the display lighting: ALWAYS, 30s, 60s, 90s, 120s Micro SD card slot for storing the telemetry data similar to a black box and for expanding the model memory PC software for evaluating or displaying the telemetry data via download Sum signal at the highest receiver output for L/S function, satellite receiver, Simulators, paddleless stabilization systems, etc. programmableModel memory-dependent binding, except for copied model memoriesWireless teacher/student function3 flight phases programmableSwashplate limiterMotor off functionNumerous surface model and helicopter mixersOther features:Simple and extremely fast bindingFree channel assignment (channel mapping), transmitter and receiver mixing functions as well as all servo settings are easily programmableBinding of any number of receivers for channel extension (max. 16 channels). The last bound receiver sends the telemetry data.Future-proof thanks to update capability via PC interfaceTechnical data:Control function: 16Width [mm]: 228 mmHeight [mm]: 66 mmTemperature range [°C]: -15 ... 55 °CAntenna: PatchTotal weight [g]: 1250 gFrequency: 2400 ... 2484,5 MHzRange approx.

KO-PROPO remote control set MC-8. 8-channel remote control including receiver. 2,4GHz technology. 8-channel remote control system: transmitter with micro receiver (27 x 28 x 15 mm) Ergonomically shaped like a game controller 2 additional buttons (channel G & H) 4 micro (AAA) batteries are required for operation. Uni/Fut plug-in system. Compatible with TAMIYA MFC-01, -02 and -03 as well as DMD/MF units Technical details: Digital trimmers for the main channels (A & B and C & F) 3D joystick (left and right) with button function (channel E & F)  

1x transmitter HS-12, with 3D sticks, color black. 12-channel transmitter, 2,4GHz. Dimensions: 222x176x53mm without stick. Weight 830g. Battery: Eneloop 2000mAh 4,8V. Running time approx. 8 hours. Matching charging cable and SD memory card are includedZwo4 handheld transmitter HS12 - the transmitter for functional model building+ Compatible: supports existing multiswitch/multinaut decoders and lighting systems + Clear: give each channel and each function in the transmitter a name (for several models) + Flexible: use multifunction buttons as buttons, rockers, switches or step switches + Convenient: almost like a touchscreen, softkeys for menu operation - no turning, less clicking + Simple: clear menu structure, universal multi-channel mixers Technical data / equipmentJoystick control channels: 2 levels each with 6 keyboard control channels: 2 levels each with 6 controls or 12 buttons Usable receiver channels without multiswitch: 12 Usable channels with multiswitch decoder in the model: 11+8 Resolution proportional channels: 2048 steps / multiswitch channels: 256 steps Receiver per model Master: 1 / Slave: any Number of servos that a control can control: Max. 3 Number of sensors that can be mixed on one servo: any Telemetry: drive battery voltage, receiver voltage Display (anti-reflective, illuminated): 128 x 64 pixels, 70 x 35 mm Processor type: 32 bit Freescale Coldfire / Memory: 8 MBit Frequency band / transmission power / radio standard: 2,4 GHz / 10 mW / 802.15.4 Battery / running time: 2 Ah 4,8 V Eneloop NimH / approx. 8 hours Weight: 830g Dimensions: 222 x 176 x 53 without stick Multifunction buttons replace rotary controls and trim and toggle switches Multifunction buttons control the menu and all special functions All Servonaut Zwo4 receivers can be used (exception: with E15/18 only first level) Matching receivers: Servonaut-E4: Article 6403 Servonaut-E6: Article 6402 Servonaut-R9: Article 6610Servonaut-R12: Article 7031Or ask about our complete sets!

Transmitter HS-12, with 3D sticks, color black. 12-channel transmitter, 2,4GHz. Dimensions: 222x176x53mm without sticks. Weight 830g. Battery: Eneloop 2000mAh 4,8V incl. RX9 receiver Transmitter HS-12 with 3D sticks plus receiver RX9! Matching charging cable and SD memory card are includedZwo4 handheld transmitter HS12 - the transmitter for functional model building+ Compatible: supports existing multiswitch/multinaut decoders and lighting systems + Clear: give each channel and each function in the transmitter a name (for several models) + Flexible: use multifunction buttons as buttons, rockers, switches or step switches + Convenient: almost like a touchscreen, softkeys for menu operation - no turning, less clicking + Simple: clear menu structure, universal multi-channel mixer Technical data / equipmentJoystick control channels: 2 levels, 6 each Both joysticks with 3D function (turning): 2 prop channels 1 button each on top of the rotary sticks: 2 touch/switch functions Keyboard control channels: 2 levels, 6 controls or 12 buttons Usable receiver channels without multiswitch: 12 Usable channels with multiswitch decoder in the model: 11+8 resolution Proportional channels: 2048 steps / multiswitch channels: 256 steps Receiver per model Master: 1 / Slave: any Number of servos that a transmitter can control: max. 3 Number of transmitters that can be mixed to a servo: any Telemetry: drive battery voltage, receiver voltage Display (anti-reflective, illuminated): 128 x 64 pixels, 70 x 35 mm Processor type: 32 bit Freescale Coldfire / memory: 8 MBit Frequency band / transmission power / radio standard: 2,4 GHz / 10 mW / 802.15.4 Battery / running time: 2 Ah 4,8 V Eneloop NimH / approx. 8 hours Weight: 830g Dimensions: 222 x 176 x 53 without stick Multifunction buttons replace rotary controls and trim and toggle switches Multifunction buttons control the menu and all special functions All Servonaut Zwo4 receivers can be used (exception: with E15/18 only first level)Matching receivers:Servonaut-R4: Article 11342Servonaut-R6: Article 11343Servonaut-RX9: Article 11136Servonaut-R12: Article 7031Or ask about our other complete sets!We are happy to put together other complete sets according to your needs.

8 single cell batteries, SANYO Eneloop 2000mAh without soldering tag, NiMH, HR-3U, mignon size. Very low self-discharge. Ideal for item 7681 (Carson Reflex Stick) as a transmitter battery set.

HS-16 transmitter, with 3D sticks, color black. 16-channel transmitter, 2,4GHz. Dimensions: 222x176x53mm without stick. Weight 830g. Battery: Eneloop 2000mAh 4,8V. Running time approx. 10 hours Matching charging cable and SD memory card are includedZwo4 handheld transmitter HS16 - the transmitter for functional model building+ Compatible: supports existing multiswitch/multinaut decoders and lighting systems + Clear: give each channel and each function in the transmitter a name (for several models) + Flexible: use multifunction buttons as buttons, rockers, switches or step switches + Convenient: almost like a touchscreen, softkeys for menu operation - no turning, less clicking + Simple: clear menu structure, universal multi-channel mixer Technical data / equipmentJoystick control channels: 3 levels each with 6 keys Keyboard control channels: 3 levels each with 6 controls or 12 keys Usable receiver channels without multiswitch: 16 Usable channels with multiswitch decoder in the model: 14+2x8 Resolution Proportional channels: 2048 steps / Multiswitch channels: 256 steps Receivers per model Master: 1 / Slave: any number Servos that a transmitter can control: max. 4 Number of transmitters that can be mixed on a servo: any Telemetry: drive battery voltage, receiver voltage Display (anti-reflective, illuminated): 128 x 64 pixels, 70 x 35 mm Processor type: 32 bit Freescale Coldfire / memory: 8 MBit Frequency band / transmission power / radio standard: 2,4 GHz / 10 mW / 802.15.4 Battery / running time: 2 Ah 4,8 V Eneloop NimH / approx. 10 hours Weight: 830g Dimensions: 222 x 176 x 53 without stick Multifunction buttons replace rotary controls and trim and toggle switches Multifunction buttons control the menu and all special functions All Servonaut Zwo4 receivers can be used (exception: with E15/18 only first level) Matching receivers: Servonaut-E4: Article 6403 Servonaut-E6: Article 6402Servonaut-RX9: Article 11136Or ask about our complete sets!

Switching gate for Reflex-StickII 14-channel. Made of 2mm VA steel. Switching gate for MFC-0x. Attached with double-sided adhesive tape (not included) Material: VA (stainless steel)Outer diameter: 49,4mmThickness: 2,0mm

HS-16 transmitter, with 3D sticks, color gray. 16-channel transmitter, 2,4GHz. Dimensions: 222x176x53mm without stick. Weight 830g. Battery: Eneloop 2000mAh 4,8V. Running time approx. 10 hours Matching charging cable and SD memory card are includedZwo4 handheld transmitter HS16 - the transmitter for functional model building+ Compatible: supports existing multiswitch/multinaut decoders and lighting systems + Clear: give each channel and each function in the transmitter a name (for several models) + Flexible: use multifunction buttons as buttons, rockers, switches or step switches + Convenient: almost like a touchscreen, softkeys for menu operation - no turning, less clicking + Simple: clear menu structure, universal multi-channel mixer Technical data / equipmentJoystick control channels: 3 levels each with 6 keys Keyboard control channels: 3 levels each with 6 controls or 12 keys Usable receiver channels without multiswitch: 16 Usable channels with multiswitch decoder in the model: 14+2x8 Resolution Proportional channels: 2048 steps / Multiswitch channels: 256 steps Receivers per model Master: 1 / Slave: any number Servos that a transmitter can control: max. 4 Number of transmitters that can be mixed on a servo: any Telemetry: drive battery voltage, receiver voltage Display (anti-reflective, illuminated): 128 x 64 pixels, 70 x 35 mm Processor type: 32 bit Freescale Coldfire / memory: 8 MBit Frequency band / transmission power / radio standard: 2,4 GHz / 10 mW / 802.15.4 Battery / running time: 2 Ah 4,8 V Eneloop NimH / approx. 10 hours Weight: 830g Dimensions: 222 x 176 x 53 without stick Multifunction buttons replace rotary controls and trim and toggle switches Multifunction buttons control the menu and all special functions All Servonaut Zwo4 receivers can be used (exception: with E15/18 only first level) Matching receivers: Servonaut-E4: Article 6403 Servonaut-E6: Article 6402Servonaut-RX9: Article 11136Or ask about our complete sets!

Switching gate for Reflex-StickII 6-channel. Made of 2mm VA steel. Switching gate for MFC-0x. Attached with double-sided adhesive tape (not included). Material: VA (stainless steel)Outer diameter: 44,6mmThickness: 2,0mm

1x transmitter HS-12, with cross joysticks, color black. 12-channel transmitter, 2,4GHz. Dimensions: 222x176x53mm without joystick. Weight 830g. Battery: Eneloop 2000mAh 4,8V. Running time approx. 8 hours. Matching charging cable and SD memory card are includedZwo4 handheld transmitter HS12 - the transmitter for functional model building+ Compatible: supports existing multiswitch/multinaut decoders and lighting systems + Clear: give each channel and each function in the transmitter a name (for several models) + Flexible: use multifunction buttons as buttons, rockers, switches or step switches + Convenient: almost like a touchscreen, softkeys for menu operation - no turning, less clicking + Simple: clear menu structure, universal multi-channel mixers Technical data / equipmentJoystick control channels: 2 levels each with 4 Keyboard control channels: 2 levels each with 6 controls or 12 buttons Usable receiver channels without multiswitch: 12 Usable channels with multiswitch decoder in the model: 11+8 Resolution proportional channels: 2048 steps / multiswitch channels: 256 steps Receiver per model Master: 1 / Slave: any Nu