Plumber

Hydraulic Hose AD 3 mm / iD 1,5 mm. 1m. Max. Pressure 18

Hydraulic hose OD 3,15mm / ID 1,5mm 1mtr. Max. pressure 18 bar at 25°C and undamaged hose! 0H052.

Available immediately, delivery time: 1-4 days

Product number: 6776

3,90 €

Subscriptions

1 screw-M3 / 2,5. In keeping with the hose Item

1 screw-in nipple M3/2,5. Suitable for hose item no. 6781 (Leimbach hose H058). 0H023. This nipple fits the Leimbach hydraulic system.

Available immediately, delivery time: 1-4 days

Product number: 6760

3,61 €

Subscriptions

Hydraulic Hose AD 4 mm / iD 2,3 mm. 1m. Max. Pressure

Hydraulic hose OD 4 mm / ID 2,3 mm. 1 m. Max. pressure 18 bar at 25°C and undamaged hose! 0H058.

Available immediately, delivery time: 1-4 days

Product number: 6781

4,50 €

Subscriptions

Screw-in nipple M3/1,5. Suitable for hose item 6776.

1 screw-in nipple M3/1,5mm. Suitable for hose item no. 6776 (Leimbach hose H052). 0H022. This nipple fits the Leimbach hydraulic system.

Available immediately, delivery time: 1-4 days

Product number: 6759

3,61 €

Subscriptions

1 seal for 4mm nipples (O-ring) 4x1. Suitable for the

1 seal for nipple 4mm (O-ring) 4x1. Suitable for the Leimbach nipples with M4 thread. Replacement sealing ring for items 6785, 6784.

Available immediately, delivery time: 1-4 days

Product number: 7177

0,65 €

Subscriptions

ScaleART sealing washer IN-233-706 for screw nipple

ScaleART Sealing washer IN-233-706 for screw nipples.

Available immediately, delivery time: 1-4 days

Product number: 10578

0,55 €

Subscriptions

Angled nipple M3/1,5. Fits hose 6776

1 Angled nipple M3/1,5. Suitable for hose article no. 6776. 0H035. Overall dimensions: length 10mm, width 5mm, height: 7/8,5mm. This nipple fits the Leimbach hydraulic system.

Available immediately, delivery time: 1-4 days

Product number: 6766

7,50 €

Subscriptions

ScaleART nipple straight, made of stainless steel, for 3mm hose

ScaleART straight nipple, made of stainless steel, for 3mm hose. Incl. union. Connection thread M3. New article 10/2020. Straight nipple 3mm incl. unionScope of delivery:1 straight nipple 3mm1 union 3mm1 hollow screw M31x sealing washerThe hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The optically and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily installed and, above all, dismantled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be reused without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections.Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.!Suitable hose: Article 11971.Suitable union wrench: Article 12024.Successor article for article 10573.

Available immediately, delivery time: 1-4 days

Product number: 12031

6,90 €

Subscriptions

1 screw-M3 / 1,0mm. In keeping with the hose Item

1 screw-in nipple M3/1,0mm. Suitable for hose item no. 7829 (Leimbach hose H050). 0H032. Through hole 0,7mm. This nipple fits the Leimbach hydraulic system.

Available immediately, delivery time: 1-4 days

Product number: 7830

3,95 €

Subscriptions

Locking sleeves 3 mm (10 piece). Suitable for Hose

Locking sleeves 3 mm (10 piece). In keeping with the hose Article no. 6776. 0H020.

Available immediately, delivery time: 1-4 days

Product number: 6757

8,50 €

Subscriptions

1x Mounting kit for folding loading crane on TAMIYA vehicles

1x Mounting kit for folding loading crane on TAMIYA vehicles. Increasing the construction position. 09405.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 7829

4,86 €

Subscriptions

ScaleART nipple angled 90 °, made of stainless steel, for 3mm

ScaleART nipple angled 90°, made of stainless steel, for 3mm hose. Incl. union. Connection thread M3. New article 10/2020. Angled nipple 3mm incl. unionScope of delivery:1 angled nipple 3mm1 union 3mm1 hollow screw M32x sealing washerThe hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The optically and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily installed and, above all, dismantled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be reused without having to shorten them. All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections. Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.! Matching hose: article 11971. Matching union wrench: article 12024. Successor to article 10572.

Available immediately, delivery time: 1-4 days

Product number: 12028

10,00 €

Subscriptions

Seal M 3 (10 piece). For all screw-in with

Seal M 3 (10 pieces). For all screw-in nipples with M3 thread 0H053. Outside diameter: 5mm, thickness: 0,35mm.

Available immediately, delivery time: 1-4 days

Product number: 6777

5,50 €

Subscriptions

Screw-in nipple M4/2,5 mm. Suitable for hose 6781.

1 screw-in nipple M4/2,5 mm. Suitable for hose article no. 6781 (Leimbach hose H058). 0H062 This nipple fits the Leimbach hydraulic system. Data: Thread: M4 with SW7 Hose connection: 2,5 mm

Available immediately, delivery time: 1-4 days

Product number: 6784

3,75 €

Subscriptions

Locking sleeves 4 mm (10 piece). Suitable for Hose

Locking sleeves 4 mm (10 piece). In keeping with the hose Article no. 6781. 0H021.

Available immediately, delivery time: 1-4 days

Product number: 6758

8,50 €

Subscriptions

ScaleART hydraulic hose 2mm

ScaleART hydraulic hose, 2mm. Sold by the meter: 1m. Max. 22 bar. Outer diameter: 2mm, inner diameter: 1,2mm. The 2mm hose is highly flexible and easy to install. Due to its small cross-section, the flow rate and therefore the cylinder speed are reduced. It is ideal for connecting small cylinders with piston diameters up to 8mm. For system pressures above 16 bar, we recommend using an additional oil cooler. The following fittings are compatible with this hose: - Item 10569 (angled) - Item 10570 (straight)

Available immediately, delivery time: 1-4 days

Product number: 10571

3,50 €

Subscriptions

ScaleART nipple straight, made of stainless steel, for 4x2,5mm hose

ScaleART straight nipple, made of stainless steel, for 4x2,5mm hose. Incl. union. Connection thread M3. New article 10/2020. Straight nipple 4mm incl. unionScope of delivery:1 straight nipple 4mm1 union 4mm1 hollow screw M31x sealing washerThe hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The optically and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily installed and, above all, dismantled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections.Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.!Suitable hose 4x2,5mm: Article 12020.Suitable union wrench: Article 12025.

Available immediately, delivery time: 1-4 days

Product number: 12041

7,00 €

Subscriptions

1 hydraulic union nut. Suitable for 4/2,5mm

1 hydraulic union nut. Suitable for the 4/2,5 mm hydraulic hose for stainless steel hydraulic cylinders with 10, 12, and 15 mm piston diameters. With a 5 mm fine thread. Suitable for the hydraulic hose with item number 9357. The screw-in thread is a 5 mm fine thread. Suitable hydraulic nipples: 9365, 9368, and 9369.

Available immediately, delivery time: 1-4 days

Product number: 9359

1,56 € 1,80 € (13.33% saved)

Subscriptions

ScaleART union nut for 3mm hose.

ScaleART Union Nut for 3mm Hose. Union nut for 3mm hose. Scope of delivery: 1 union nut 3mm. The hydraulic connection nipples from ScaleART represent an absolute innovation! Unlike previous and commercially available connection nipples, these are made of stainless steel instead of brass! This allows for higher tightening torques, which in turn guarantee greater durability, reliability, and a tight seal. Stripped or damaged threads are now a thing of the past! The visually and technically very cleanly manufactured components offer another crucial advantage: The union nuts, which replace the previous sleeves, can be easily installed and, above all, removed thanks to their threaded design. This means that hoses can be removed from the hydraulic nipple without damage and reused without having to shorten them. All new connection nipples, whether for 2mm, 3mm, or 4mm hose, are equipped with an M3 connection thread. Double connections can also be achieved thanks to the two available sleeve screws (short and long). Easy assembly is made possible by specially designed tools similar to a ring/open-end wrench. This finally eliminates the tedious and cumbersome handling of pliers, sandpaper, etc.! Suitable hose: Item 11971. Suitable union wrench: Item 12024.

Available immediately, delivery time: 1-4 days

Product number: 12029

1,90 €

Subscriptions

1 Angled nipple M3 / 1,0. Suitable for Hose

1 angled nipple M3/1,0. Suitable for the hose item no. 7829 (Leimbach hose H050). 0H034 This nipple fits the Leimbach hydraulic system.

Available immediately, delivery time: 1-4 days

Product number: 8985

7,98 €

Subscriptions

1m hydraulic hose 4x2,5mm, black. Suitable for the

1m hydraulic hose 4x2,5mm, black. Suitable for stainless steel hydraulic cylinders with 10, 12, 15mm pistons. Permissible pressure up to 20 bar with undamaged hose. Suitable union nuts (lock nuts) can be found under item number 9359. Suitable hydraulic nipples: items 9365, 9368, 9369.

Available immediately, delivery time: 1-4 days

Product number: 9357

4,20 € 5,49 € (23.5% saved)

Subscriptions

ScaleART nipple angled 90 °, made of stainless steel, for 4x2,5mm

ScaleART nipple angled 90°, made of stainless steel, for 4x2,5mm hose. Incl. union. Connection thread M3. New article 10/2020. Angled nipple 4mm incl. unionScope of delivery:1 angled nipple 4mm1 union 4mm1 hollow screw M32x sealing washerThe hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The optically and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily assembled and, above all, disassembled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be reused without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections.Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.!Suitable hose 4x2,5mm: Article 12020.Suitable union wrench: Article 12025.

Available immediately, delivery time: 1-4 days

Product number: 12035

10,50 €

Subscriptions

Angled nipple M4/2,5 mm. Fits hose 6781.

1 Angled nipple M4/2,5 mm. Suitable for hose item no. 6781 (Leimbach hose H058). H066. SW7. This nipple fits the Leimbach hydraulic system. Specifications: Thread: M4 with SW7. Hose connection: 2,5 mm

Available immediately, delivery time: 1-4 days

Product number: 6785

7,50 €

Subscriptions

ScaleART hydraulic hose 3mm

ScaleART hydraulic hose 3mm. By the meter: 1m. Pressure up to 16 bar. Outside diameter 3,1mm inside diameter 1,9mm.

Available immediately, delivery time: 1-4 days

Product number: 10577

3,00 €

Subscriptions

1 2,5 mm Y-connector. In keeping with the hose Article no. 6781

1 2,5 mm Y-connector. In keeping with the hose Article no. 6781 (Leimbach hose H058). 0H015.

Available immediately, delivery time: 1-4 days

Product number: 6754

10,50 €

Subscriptions

1 connector without valve for 0H059 (small). M3.Separable

1 plug without valve for 0H059 (small). M3. Detachable hydraulic connection. 0H060. To connect a hydraulic hose, an additional nipple with M3 thread is required: for 1mm hose item 7830 for 1,5mm hose item 6759 for 2,5mm hose item 6760 In theory, angled nipples with M3 thread can also be used. The matching counterpart to this article is item 6782.

Available immediately, delivery time: 1-4 days

Product number: 6783

9,50 €

Subscriptions

Swivel nipple M3/2,5. Suitable for hose item no. 6781

1 Swivel nipple M3/2,5. Suitable for hose item no. 6781 (Leimbach hose H058). 0H028. Technical data: Screw-in thread: M3 Hose connection: 2,5 mm Design: Swivel nipple Suitable accessories: Hydraulic hose: 6781 Safety sleeve: 6758

Available immediately, delivery time: 1-4 days

Product number: 6764

8,98 € 8,99 € (0.11% saved)

Subscriptions

ScaleART hydraulic hose 4mm. Sold by the meter: 1m. Up to max. 30

ScaleART hydraulic hose, 4mm. Sold by the meter: 1m. Up to max. 30 bar. Outer diameter 4mm, inner diameter 2mm. This 4x2mm hose is primarily used for systems with increased flow rates. Examples include the pressure line between the pump and valve block, as well as for connecting telescopic cylinders. It is relatively stiff and somewhat bulky to install. This makes it less prone to kinking on bends and quite robust. An oil cooler should be used above 20 bar.

Available immediately, delivery time: 1-4 days

Product number: 12019

7,50 €

Subscriptions

1 Y connector 1,5-2,0 mm. In keeping with the hose Item

1 Y connector 1,5-2,0 mm. In keeping with the hose Article no. 6776 (Leimbach hose H052). 0H014.

Available immediately, delivery time: 1-4 days

Product number: 6753

10,50 €

Subscriptions

Rubber coupling for Leimbach pumps. Made of clear material.

1x rubber coupling for Leimbach pumps. Made of clear material (formerly black). -Original spare parts.

Available immediately, delivery time: 1-4 days

Product number: 11053

6,79 € 6,80 € (0.15% saved)

Subscriptions

T-connector 2,5 mm. Suitable for hose item no. 6781

1x T-connector 2,5 mm. In keeping with the hose Article no. 6781 (Leimbach hose H058). 0H017.

Available immediately, delivery time: 1-4 days

Product number: 6756

5,90 €

Subscriptions

ScaleART hydraulic hose 3mm. By the meter: 1m. Print up to 20

ScaleART hydraulic hose 3mm. By the meter: 1m. Pressure up to 20 bar. Outside diameter 3,1mm inside diameter 1,9mm.

Available immediately, delivery time: 1-4 days

Product number: 11971

5,30 €

Subscriptions

ScaleART nipple straight, made of stainless steel, for 4x2mm hose

ScaleART straight nipple, made of stainless steel, for 4x2mm hose. Incl. union. Connection thread M3. New article 10/2020. Straight nipple 4mm incl. unionScope of delivery:1 straight nipple 4mm1 union 4mm1 hollow screw M31x sealing washerThe hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The optically and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily installed and, above all, dismantled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections.Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.!Suitable hose 4x2mm: Article 12019.Suitable union wrench: Article 12025.

Available immediately, delivery time: 1-4 days

Product number: 12033

7,00 €

Subscriptions

1 2 just spout mm. (Connector) Suitable for Hose

1 2 just spout mm. (Connector) Suitable for hose Article no. 6776 (Leimbach hose H052). 0H046.

Available immediately, delivery time: 1-4 days

Product number: 6773

4,30 €

Subscriptions

ScaleART hydraulic hose 4x2,5mm. By the meter: 1m. Max. 12

ScaleART hydraulic hose 4x2,5mm. Sold by the meter: 1m. Max. 12 bar. Outside diameter: 4mm, inside diameter: 2,5mm. Polyurethane hose. The 4x2,5mm hose is highly flexible and can be laid very easily. However, it tends to kink quickly in tight radii. If the hose kinked during assembly, you should replace it, as it will burst at this point later. The larger inside diameter makes it ideal as a return line between the valve block and the pump. Since there is no pressure here, the low pressure resistance is not a problem.

Available immediately, delivery time: 1-4 days

Product number: 12020

5,30 €

Subscriptions

1 swivel nipple M3 / 2,0. For hose 3 / 1,5-2,0mm. Fits

1 swivel nipple M3/2,0. For hose 3/1,5-2,0mm. Suitable for hose item no. 6776 (Leimbach hose H052). H027.

Available immediately, delivery time: 1-4 days

Product number: 6763

8,98 € 8,99 € (0.11% saved)

Subscriptions

Hydraulic union nut. Fits 3/2mm hose. 1 pc.

1 hydraulic union nut. Fits 3/2mm hydraulic hose for stainless steel hydraulic cylinders with 8mm piston diameter. With 4mm fine thread. Compatible with hydraulic hose part number 9358. The thread is a 4mm fine thread. Matching hydraulic nipples: part numbers 9369 and 9367.

Available immediately, delivery time: 1-4 days

Product number: 9360

1,50 € 1,96 € (23.47% saved)

Subscriptions

ScaleART nipple straight incl. union for 3mm hose

ScaleART nipple straight, with sealing washer, including D3 union for 3mm hose. Thread M3. The matching hydraulic hose has the item number 10577. Item 10572 is available as an angled nipple.

Available immediately, delivery time: 1-4 days

Product number: 10573

5,95 €

Subscriptions

1 T-connector 2,0 mm. In keeping with the hose Article no. 6776

1 T-connector 2,0 mm. Suitable for hose Article no. 6776 (Leimbach hose H052). 0H016. Lights diameter 1,4mm.

Available immediately, delivery time: 1-4 days

Product number: 6755

5,90 €

Subscriptions

ScaleART straight nipple, made of stainless steel, for 2mm hose. I

ScaleART straight nipple, made of stainless steel, for 2mm hose. Incl. union. Connection thread M3. New article 10/2020. Straight nipple 2mm including unionScope of delivery: 1 straight nipple 2mm 1 union 2mm 1 hollow screw M3 2x sealing washer The hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The visually and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily assembled and, above all, disassembled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections.Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.!Suitable hose: Article 10571.Suitable union wrench: Article 12023.

Available immediately, delivery time: 1-4 days

Product number: 12026

8,43 €

Subscriptions

Locking sleeves 2 mm (10 piece). Suitable for Hose

Locking sleeves 2 mm (10 piece). In keeping with the hose Article no. 7829. 0H031.

Available immediately, delivery time: 1-4 days

Product number: 7831

9,95 €

Subscriptions

1m hydraulic hose 3x2mm, black. Matching the

1m hydraulic hose 3x2mm, black. Suitable for stainless steel hydraulic cylinders with 8mm pistons. Matching union nuts (lock nuts) can be found under item number 9360. Matching hydraulic nipples can be found under item numbers 9369, 9367.

Available immediately, delivery time: 1-4 days

Product number: 9358

4,70 € 5,49 € (14.39% saved)

Subscriptions

Hydraulic oil 500 ml, for Leimbach system. 0H005

Hydraulic oil 500 ml, for Leimbach system. 0H005. HVI-32.

Available immediately, delivery time: 1-4 days

Product number: 6751

Content: 0.5 liters (€27,98 / 1 liter)

13,99 €

Subscriptions

Seal M 5 (10 piece). For all screw-in with

Seal M 5 (10 piece). For all screw-with-threaded 5H0 M054.

Available immediately, delivery time: 1-4 days

Product number: 6778

5,50 €

Subscriptions

Locking sleeves 4 mm (10 piece). Suitable for Hose

4 mm locking sleeves (10 pieces). Suitable for hose item no. 6781. 0H021-1. Special version for T and Y connectors. For hose H058.

Available immediately, delivery time: 1-4 days

Product number: 11402

9,40 €

Subscriptions

1 Hydraulic nipple, straight. For 3 / 2mm

1 hydraulic connection nipple, straight. For 3/2mm hydraulic hose. Suitable for stainless steel cylinders with 10, 12 and 15mm pistons. The hydraulic hose with item number 9358 fits this hydraulic nipple. The screw-in thread is a 5mm FINE THREAD. Matching union nut: item 9360.

Available immediately, delivery time: 1-4 days

Product number: 9369

2,50 € 7,60 € (67.11% saved)

Subscriptions

ScaleART union nut for 4mm hose.

ScaleART Union Nut for 4mm Hose. Union nut for 4mm hose. Scope of delivery: 1 union nut 4mm. The hydraulic connection nipples from ScaleART represent an absolute innovation! Unlike previous and commercially available connection nipples, these are made of stainless steel instead of brass! This allows for higher tightening torques, which in turn guarantee greater durability, reliability, and a tight seal. Stripped or damaged threads are now a thing of the past! The visually and technically very cleanly manufactured components offer another crucial advantage: The union nuts, which replace the previous sleeves, can be easily installed and, above all, removed thanks to their threaded design. This means that hoses can be removed from the hydraulic nipple without damage and reused without having to shorten them. All new connection nipples, whether for 2mm, 3mm, or 4mm hose, are equipped with an M3 connection thread. Double connections can also be achieved thanks to the two available sleeve screws (short and long). Easy assembly is made possible by specially designed tools similar to a ring/open-end wrench. This finally eliminates the tedious and cumbersome handling of pliers, sandpaper, etc.! Suitable hose: Item 12019, 12020. Suitable union wrench: Item 12025.

Available immediately, delivery time: 1-4 days

Product number: 12030

1,59 €

Subscriptions

Y-distributor with connection nipples. Suitable for hose 9357

1 Y-distributor with connection nipples. Suitable for the stainless steel cylinders. This Y-distributor is supplied with 3 straight connection nipples and 3 union nuts. The hydraulic hose (item 9357) 4x2,5mm fits this distributor.

Available immediately, delivery time: 1-4 days

Product number: 11078

17,80 €

Subscriptions

1 Hydraulic nipple, straight. For 4 / 2,5mm

1 hydraulic connection nipple, straight. For 4/2,5mm hydraulic hose. Suitable for stainless steel cylinders with 12, 15mm pistons. With 5x0,5mm thread. The hydraulic hose with item number 9357 fits this hydraulic nipple. The screw-in thread is a 5mm FINE THREAD. Matching union nut: item 9359.

Available immediately, delivery time: 1-4 days

Product number: 9368

2,50 €

Subscriptions

Locking sleeves 3 mm (10 piece). Fits the hose Artik

Retaining sleeves 3 mm (10 pieces). Suitable for hose item no. 6776. 0H020-1. Special version for T and Y connectors. For -old- hose H052. For 3mm hose with T or Y connector

Available immediately, delivery time: 1-4 days

Product number: 11401

8,21 €

Subscriptions

ScaleART nipple angled 90 °, made of stainless steel, for 2mm socket

ScaleART 90° angled nipple, made of stainless steel, for 2mm hose. Includes union nut. M3 connection thread. New item 10/2020. Angled nipple 2mm incl. union nut. Scope of delivery: 1 angled nipple 2mm, 1 union nut 2mm, 1 banjo bolt M3, 2 sealing washers. The hydraulic connection nipples from ScaleART are an absolute innovation! Unlike previous and commercially available connection nipples, these are made of stainless steel, not brass! This allows for higher tightening torques, which in turn guarantee greater durability, reliability, and leak-proof connections. Threads that strip or strip are now a thing of the past! The visually and technically very cleanly manufactured components offer another crucial advantage: The union nuts, which replace the previous sleeves, can be easily installed and, above all, removed thanks to their threaded design. This allows hoses to be removed from the hydraulic nipple without damage and reused without needing to be shortened. All new connection nipples, whether for 2mm, 3mm, or 4mm hoses, are equipped with an M3 connection thread. Double connections can also be created using the two available sleeve screws (short and long). Easy installation is made possible by specially designed tools similar to a ring/open-end wrench. This finally eliminates the tedious and cumbersome handling of pliers, sandpaper, etc.! Suitable hose: Item 10571. Suitable union wrench: Item 12023.

Available immediately, delivery time: 1-4 days

Product number: 12021

10,00 €

Subscriptions

1x sintered filter insert 'New' Leimbach. 0H055N

Available immediately, delivery time: 1-4 days

Product number: 6779

9,00 €

Subscriptions

Pressure gauge set 0-25bar. Incl. Hose. 0H151S

1x pressure gauge set 0-25 bar. Incl. hose. 0H151S. Outside diameter: 39mm. Thickness 27mm. Total length 67mm (with nipple). Scope of delivery:1 pressure gauge up to 25 bar1 connection nipple H023 M3/2,5mm (item 6760)2 safety sleeves 4mm (item 6758)approx. 70cm hose (item 6781) H058 4/2,3mmInstructions

Available immediately, delivery time: 1-4 days

Product number: 6795

37,90 €

Subscriptions

Hydraulic oil 250 ml, for Leimbach system 0H002

Hydraulic oil 250 ml, for Leimbach system 0H002. Shipping weight 240 g.

Available immediately, delivery time: 1-4 days

Product number: 6750

Content: 0.25 liters (€34,00 / 1 liter)

8,50 €

Subscriptions

1 screw-M5 / 3,0. In keeping with the hose Item

1 screw-in nipple M5/3,0. Suitable for hose item no. 6781 (Leimbach hose H058). 0H025. DISCONTINUED ITEM! This nipple fits the Leimbach hydraulic system. Item is no longer available after sale!

No longer available

Product number: 6762

3,86 €

Subscriptions

Details

1 screw-M5 / 2,5 mm. Suitable for Hose

1 screw-in nipple M5/2,5 mm. Suitable for hose article number 6781 (Leimbach hose H058). 0H057. DISCONTINUED ITEM! This nipple fits the Leimbach hydraulic system. No longer available after sale.

End of life - article no longer available!

Product number: 6780

4,50 €

Subscriptions

Details

Filter products