Filter

1x sintered filter insert 'New' Leimbach. 0H055N

Available immediately, delivery time: 1-4 days

Product number: 6779

9,00 €

Subscriptions

1 filter unit completely. Leimbach. With filter insert and

1 complete filter unit. Leimbach. With filter insert and connections. M4. With screw-in nipple M4/2,5mm. With ANGLED connections! 0H130A. It doesn't matter which connection is used as INLET or OUTLET. However, the choice once made must be retained, otherwise the dirt particles from the filter element will be flushed back into the circuit - this must be avoided at all costs! Dimensions: Height without nipple: 33mm Height with nipple: 42mm Diameter: 24,5mm without connection parts

Available immediately, delivery time: 1-4 days

Product number: 8433

39,90 €

Subscriptions

Fumotec ventilation filter M5 Dimensions: 21,5 x 8,5mm

Vent filter. 1 piece. Holds back oil particles during tank venting. Thread: M5. Total height: 21,5mm. Max. diameter: 8,5mm.

Available immediately, delivery time: 1-4 days

Product number: 11189

6,40 €

Subscriptions

1 filter unit completely. Leimbach. With filter insert and

1 complete filter unit. Leimbach. With filter insert and connections. M4. With screw-in nipple M4/2,5mm. 0H130. It does not matter which connection is used as INLET or OUTLET. However, the choice once made must be retained, otherwise the dirt particles from the filter element will be flushed back into the circuit - this must be avoided at all costs!

Available immediately, delivery time: 1-4 days

Product number: 7355

34,90 €

Subscriptions

ScaleART Hydrauli oil filter

Hydraulic oil filter with CNC-machined and black anodized housing, including mounting brackets. Suitable for pressures up to 25 bar, M3 connection thread. Contents of the mounting kit: filter element, filter housing, O-ring, sealing washer, connection nipple with union nut, hydraulic hose, screws. Usage: Always install the oil filter in the return line between the valve block and the pump. Never install the filter in the pressure line, as this can damage it. For optimal filtration performance, the connection lines should be as large as possible. When installing the filter, pay attention to the flow direction. This is indicated by an arrow on the filter element. The arrow must always point towards the tank. A maximum of 3 lines can be connected to the filter inlet side. Any unused holes must be sealed with screws and gaskets. On the filter outlet side, the nipple is screwed directly into the filter cartridge. The cartridge may rotate within the housing when tightening. To avoid this, you need to use pliers to hold the hexagon in place so that you can tighten the nipple properly.

Available immediately, delivery time: 1-4 days

Product number: 10500

62,55 €

Subscriptions

Filter products