Hydraulic pumps

Hydraulic tank made of aluminum. Cube shape with 45x45x45mm, ca.50ccm

1 hydraulic tank made of aluminum. Cube shape with 45x45x45mm external dimensions. With 4 straight connection nipples for 4/2,5mm hose and 4 union nuts. With lid screwed on one side. Approx. 50cbm capacity. Article 9368 is installed as connection nipple.

Available immediately, delivery time: 1-4 days

Product number: 10862

€ 34,99 *

Subscriptions

1x hydraulic oil in plastic bottle 500ml. For the

1x hydraulic oil in plastic bottle 500ml. For use with the stainless steel hydraulic cylinders. When using the hydraulic pump Article 9373 9374 and it is strongly recommended to use this special hydraulic oil!

Available immediately, delivery time: 1-4 days

Product number: 9372

Content: 0.5 liters (39,80 €* / 1 litre)

€ 19,90 *

Subscriptions

Roxxy BL-Control 930-6. Regulator for brushless motors

1 Roxxy BL-Control 930-6. Controller for brushless motors. Forward/reverse function programmable. For internal and external rotor operation. (8630). Forward and reverse functions programmable.Governor mode, optionally programmable with or without speed controller mode.Plug-on programmer for simple and clear setting of functions.Can be set to either internal or external rotor operation.Brake can be switched on and off via programming.High clock frequency (32000 Hz) for sensitive control.Integrated temperature protection.Designed for 6-18 NC/NiMH cells or 2-6 LiPo cells.Programmable undervoltage shutdown.Coordinated with the ROXXY BL motor series, but can also be used for other BL motors.With the usual robbe protection and filter functions (POR start-up protection, RX filter).Weight: 29g.Dimensions: 49x25x10mmShort term: 35ABEC: 5,5V/max. 2A Additional functions (only with optional programmer!) - Shutdown voltage - Shutdown module - Motor timing - Acceleration - Start - Power - Braking force - Governor (speed controller mode)

Available immediately, delivery time: 1-4 days

Product number: 9070

€ 88,98 * € 93,10 * (4.43% saved)

Subscriptions

Display-CARD, servo tester and programming card Servonaut

1 display card, servo tester and programming card (Servonaut). Dimensions: 105x49x24mm. Lipo tester, servo tester, receiver tester and Servonaut programming aid.Lipo tester: for 2s, 3s and 4s LiPo, LiIo, LiFe batteries with diagnosis and care tips.Servo tester: This can be used to check the function of a servo and the function of a linkage in the model without having to set up a complete remote control. Also suitable for testing controllers.Receiver signal diagnosis: Measures the received pulse width in microseconds and percent. Multibus protocols are automatically recognized and also displayed.Programming aid for Servonaut modules with CARD interface: Menu-guided in plain text as with the Servonaut transmitter in German and English.Special feature: Built-in 2A BEC, can be powered by a 2s or 3s Lipo e.g. for the servo test.Dimensions (mm): 105 x 49 x 24

Available immediately, delivery time: 1-4 days

Product number: 12301

€ 63,00 *

Subscriptions

1x motor adapter for hydraulic pump and TruckPuller motor.

1x motor adapter for hydraulic pump and TruckPuller engine. Alu. Suitable for all electric motors of size 540 like TruckPuller3, TM72, TM120, etc. Suitable for the hydraulic pump Article 9373 and 9374.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9444

€ 36,30 * € 39,99 * (9.23% saved)

Subscriptions

1 hydraulic pump 20bar. Flow rate up to 500ml / min. Only mi

1 hydraulic pump 20 bar. Delivery rate up to 500 ml/min. Only operate with special hydraulic oil article 9372! Dimensions: 36x36x31mm without nipples. With nipples and union nuts. The pump is connected with the hydraulic hose item 9357 (not included).This pump is designed for use with the stainless steel cylinders.An electric motor with the appropriate motor adapter is required to drive the pump.Motor adapters are available under item numbers 9444, 9445, 9446.Motors in the performance class of the TruckPuller3 motors are only partially suitable for the drive!For full performance development, Faulhaber motors (item 10933 or 10934) are recommended.Working pressure: 20 barFlow rate: up to 650ml/min.Input speed: up to max. 8000 rpm.Dimensions: 36x36x31mm without nipple

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9374

€ 254,90 *

Subscriptions

1 hydraulic pump 13bar. Flow rate up to 500ml / min. Only mi

1 hydraulic pump 13 bar. Delivery rate up to 500 ml/min. Only use with special hydraulic oil item 9372! Dimensions: 30x30x30mm without nipples. With nipples and union nuts. The pump is connected with the hydraulic hose item 9357 (not included). This pump is designed for use with stainless steel cylinders. An electric motor and the appropriate motor adapter are required to drive this pump. Motor adapters are available under item numbers 9444, 9445, 9446. Working pressure: 13 bar Delivery rate up to 450 ml/min. Dimensions: 30x30x25mm Max. input speed: 8000 rpm.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9373

€ 199,99 * € 203,90 * (1.92% saved)

Subscriptions

1x Motor adapter for hydraulic pump and BrushLess motor BL

1x motor adapter for hydraulic pump and brushless motor BL 3548/09. Aluminum. Suitable for hydraulic pumps items 9373 and 9374. Suitable brushless motor: item 6574

Available immediately, delivery time: 1-4 days

Product number: 9445

€ 33,00 * € 39,99 * (17.48% saved)

Subscriptions

ScaleART hydraulic pump 240 ml, in vehicle tank (short)

Hydraulic pump 240 ml, in the vehicle tank (short), silver Hydraulic pump, in the vehicle tank (short) including tank for short telescopic cylinder, silver Unit pump in the tank including motor, soldered cables and interference suppression kit. Gear pump with integrated pressure relief valve and leak oil connection. Housing made of silver anodized aluminum, gears made of steel. Drive motor: Bell-armature motor from Faulhaber (high efficiency, high performance and very low power consumption). The complete pump and oil tank unit is integrated in the vehicle diesel tank. The pump can be flanged directly to the tank or connected to it using hoses. The pump is delivered assembled with cables and interference suppression kit.Tank length: 82mm (for three-way tipper)Oil volume: approx. 95 cm³Motor: 12VPressure: 12-14 barDischarge volume: approx. 240 ml/minCurrent consumption: 1,4ADimensions of the pump including motor: 23 x 23 x 76 mmConnection nipple and hydraulic hose are not included in delivery!Any connection nipple (straight or angled) with an M3 thread will fit. The nipple is screwed in instead of the blind screw. Total external dimensions: 84,5mm x 50mm (width) x 46mm (height).

Ready to ship in 5 days, delivery time 1-4 days

Product number: 10499

€ 398,60 *

Subscriptions

ScaleART Hydraulic oil cooler Made of brass, black

Hydraulic oil cooler Made of brass, black lacquered. Incl. Cover, support, fan, nipple, union nut, hose

Available immediately, delivery time: 1-4 days

Product number: 10563

€ 145,00 *

Subscriptions

1x motor adapter for hydraulic pump and Faulhaber motor. Al

1x motor adapter for hydraulic pump and Faulhaber motor. Alu. For Faulhaber motors 3257,3557,3863. Engine Type MUST be specified! Matching the hydraulic pump Article 9373 and 9374.

Available immediately, delivery time: 1-4 days

Product number: 9446

€ 33,00 *

Subscriptions

Hydraulic pump in the vehicle tank. ScaleArt. Silver, long

1x hydraulic pump in the vehicle tank. ScaleArt. Silver anodized. 12V. 110 cc tank, long version. Nipples with M3 thread are used. Hydraulic pump 240 ml, in the vehicle tank (long) including tank for telescopic cylinder. Long, silver. Unit pump in the tank including motor, soldered cables and interference suppression kit. Gear pump with integrated pressure relief valve and leak oil connection. Housing made of silver anodized aluminum, gears made of steel. Drive motor: Bell-armature motor from Faulhaber (high efficiency, high performance and very low power consumption). The complete unit (pump and oil tank) is integrated in the vehicle diesel tank. The pump can be flanged directly to the tank or connected to it using hoses. The pump is delivered assembled with cables and interference suppression kit.Technical data:Tank length: 105mm (for halfpipe)Oil volume: approx. 110 qcmMotor: 12VPressure: 12 barDischarge volume: approx. 240 ml/minCurrent consumption: approx. 1,4ADimensions of the pump including motor: 23 x 23 x 76 mm

Ready to ship in 5 days, delivery time 1-4 days

Product number: 12310

€ 398,60 *

Subscriptions

Fuel tank 130mm made of V2A with straps, urea tank

Fuel tank 130mm made of V2A with tank straps and frame bracket. Incl. step width: 50mm, depth 130mm, height 50mm. Can be used as a hydraulic oil tank. Fuel tank made of stainless steel for hydraulic oil with integrated steps and urea tank. The tank can also be used for hydraulic systems using the hydraulic nipples for 4mm hoses. Scope of delivery: fully assembled with tank bracket and mounting screws. Dimensions: 130 x 50 x 50mm.

Available immediately, delivery time: 1-4 days

Product number: 11367

€ 124,99 * € 129,00 * (3.11% saved)

Subscriptions