Leimbach pumps

1x rubber coupling for Leimbach pumps. Made of clear material

1x rubber coupling for Leimbach pumps. Made of clear material (formerly black). -Original spare parts.

Available immediately, delivery time: 1-4 days

Product number: 11053

€ 6,79 * € 6,80 * (0.15% saved)

Subscriptions

1 brushless motor with controller for Leimbach-hydraulic pumps

1 brushless motor with controller for Leimbach hydraulic pumps. 12V version. 0H995/12. With this upgrade option for the Leimbach hydraulic pumps, faster hydraulic movements can be achieved in a model due to the larger flow. A normal pump motor can easily be replaced with this brushless motor. The pump coupling is simply screwed onto the brushless motor. To operate, the 3-pin servo cable is plugged into the receiver. A rotary or slide controller should be used on the transmitter side. This enables continuous speed regulation. Technical data: Operating voltage 12V Speed 0-12.000 rpm Receiver supply (BEC) 5V max. 3A Attention: If the pump is operated permanently or over a longer period at an increased speed, increased wear on the pump will occur!

Available immediately, delivery time: 1-4 days

Product number: 7827

€ 199,50 *

Subscriptions

Adjusting tool for control valve eccentric (Leimbach)

Adjustment tool for control valve eccentric (Leimbach valves). Aluminum. Suitable for Leimbach standard valves.

Available immediately, delivery time: 1-4 days

Product number: 11411

€ 10,50 *

Subscriptions

1x PVC tank cover 35mm, transparent, with O-ring. For

1x PVC tank cap 35mm, transparent, with O-ring. For Leimbach hydraulic tank. -Original spare part-.

Available immediately, delivery time: 1-4 days

Product number: 9111

€ 7,50 *

Subscriptions

1 hydraulic pump 12 volt / 380 ml/min. at 12 bar

1 hydraulic pump 12 volt / 380 ml/min. Set to 12 bar. 10-16 bar. H103A gear pump. Height 35mm. Width 35mm. Length 155mm with tank. Incl. filter. With ANGLED connections. H103A. With angled connections H066 (item 6785). Pump and filter (above) are supplied with the angle nipples (H066 - item 6785). The hydraulic hose that fits this is item 6781. The connection nipples H066 (item 6785) used have the following data: Thread: M4 with SW7 Hose connection: 2,5mm

Available immediately, delivery time: 1-4 days

Product number: 7836

€ 286,00 *

Subscriptions

1 replacement motor for Leimbach pump H103. For 7,2-12V

1 replacement motor for Leimbach pump H103. For 7,2-12V. With interference suppression material. Also suitable for long-coupled H102 Diameter of the output shaft: 3,2mm without flattening Free length of the output shaft: 7mm Diameter of the motor housing: 37mm Total length of the motor without shaft: 64mm Motor type: brush motor Max. current consumption, depending on the delivery capacity: approx. 3A

Available immediately, delivery time: 1-4 days

Product number: 8819

€ 24,89 * € 24,90 * (0.04% saved)

Subscriptions

1 hydraulic pump 12 volt / 380 ml/min. at 12 bar

1 hydraulic pump 12 volt / 380 ml/min. Set to 12 bar. 10-16 bar. Gear pump. Height 35mm. Width 35mm. Length 155mm with tank. Incl. filter. With straight connections. H103. Pump and filter (above) are supplied with the connection nipples H062 (item 6784). Nipples have the following data: Total length pump/tank/motor: 149mm without connection flags of the motor. Thread: M4 with SW7 Hose connection: 2,5mm

Ready to ship in 8 days, delivery time 1-4 days

Product number: 6790

€ 269,90 *

Subscriptions

1 brushless motor with controller for Leimbach-hydraulic pumps

1 brushless motor with controller for Leimbach hydraulic pumps. 7,2V version. 0H995/72. With this upgrade option for the Leimbach hydraulic pumps, faster hydraulic movements can be achieved in a model due to the larger flow. A normal pump motor can easily be replaced with this brushless motor. The pump coupling is simply screwed onto the brushless motor. To operate, the 3-pin servo cable is plugged into the receiver. A rotary or slide controller should be used on the transmitter side. This enables continuous speed regulation.Technical data:Operating voltage 7,2VSpeed 0-12.000 rpmReceiver supply (BEC) 5V max. 3AWarning:If the pump is operated permanently or over a longer period at an increased speed, increased wear on the pump will occur!

Available immediately, delivery time: 1-4 days

Product number: 7828

€ 199,50 *

Subscriptions

1 hydraulic pump 12 volt / 450 ml/min. to 12 bar

1 hydraulic pump 12 volt / 480 ml / min. Set to 12bar. 10-16bar. Gear pump. 0H104. Width 35. Height 35mm. Length 195mm with tank. SALE items! Item is no longer available after sale!

End of life - article no longer available!

Product number: 6791

€ 248,00 *

Subscriptions

Details

1x replacement tank for Leimbach pump H103 and H104, 70mm long

1x replacement tank for Leimbach pump H103 and H104, 70mm long. Hydraulic tank. -Original spare part-. Standard tank. Scope of delivery:1x tank in the specified length2x screw-in nipple, article 67601x transparent tank cap1x O-ring for tank capMatching hose article 6781

Available immediately, delivery time: 1-4 days

Product number: 10139

€ 31,50 *

Subscriptions

1 hydraulic pump 12 volt / 200 ml/min. at 12 bar

1 hydraulic pump 12 volt / 200 ml/min. Set to 12 bar. 10-16 bar. H102A. Gear pump. Height 35mm, width 35mm. Length 150mm with tank. Incl. filter. With angled M4 connections. (H066)

Available immediately, delivery time: 1-4 days

Product number: 7442

€ 286,00 *

Subscriptions

1 hydraulic pump 7,2 volts in the truck tank. To 12 bar

1 hydraulic pump 7,2 volts in the truck tank. Set to 12 bar. 10-16 bar. Gear pump. Height 52mm. Width 42mm. Length 97mm with tank. Incl. filter. H114-7,2. 7,2V version! Delivery rate: 200-500ml/min, depending on the set speed. Tank capacity: 85 sq cm (approx. 80 sq cm usable) Delivered ready for installation with filter, tank straps, fastening material, brushless motor and controller. Ideal for tight spaces!

Available immediately, delivery time: 1-4 days

Product number: 8407

€ 598,00 *

Subscriptions

1 replacement motor for Leimbach pump H102. For 7,2-12V

1 replacement motor for Leimbach pump H102. For 7,2-12V. With interference suppression material. Diameter of the output shaft: 3,2mm without flatteningFree length of the output shaft: 7mmDiameter of the motor housing: 37mmTotal length of motor without shaft: 64mmMotor type: brush motorMax. current consumption, depending on delivery capacity: approx. 3A

Ready to ship in 8 days, delivery time 1-4 days

Product number: 8820

€ 24,89 * € 24,90 * (0.04% saved)

Subscriptions

1 hydraulic pump 12VoltBL/380 ml/min. Set to 12 bar

1 hydraulic pump 12VoltBL/380 ml/min. Set to 12 bar. 10-16 bar. Gear pump. Height 35mm. Width 35mm. Length 155mm with tank. Incl. filter. With angled connections.H193ABL12V pump and filter (above) are supplied with the connection nipples H066 (item 6785). Nipples have the following data:Thread: M4Hose connection: 2,5mm, suitable for hose item 6781Total length pump/tank/motor: 120mm without connection flags of the motor. Thread: M4 with SW7Hose connection: 2,5mmHydraulic pump unit with brushless motorThis pump is our standard pump unitH103A, on which our brushless motor (order no. 0H995) is pre-installed at the factory. As with all of our pump units, a filter unit is also included in the scope of delivery. The brushless controller included in the scope of delivery enables continuous control of the speed during operation. This allows the maximum movement speed to be set during operation via remote control by changing the pump's delivery rate. As with the standard pump unit, the operating pressure is preset to approx. 12 bar and can also be increased with the brushless motor up to a maximum of approx. 16 bar.--------------------------------------------------------------------- Due to the high flow speeds at which the oil flows back into the tank and is sucked in again, the oil can foam up. The tank should therefore be as large as possible. Please contact us if you require a larger tank. --------------------------------------------------------------------- Technical data:Speed: 0 to approx. 12.000 rpm (continuously adjustable)Flow rate: approx. 500 ml/min maximum (depending on the set speed)Current consumption: up to 6,5A at 7,2V, 16 bar (depending on the set pressure)Connections for: pressure, return, venting & fillingTank capacity: approx. 27 cc (usable volume)Pressure: up to max. 16 bar (adjustable)----------------------------------------------------------------------ATTENTION!If the hydraulic pump is operated permanently or for a long time at a higher speed, there will be increased wear on the pump, which is not covered by the statutory warranty!--------------------------------------------------------------------------------------------------------------------------------------------Important note:The installation position is crucial for the function of our pumps!Our pumps cannot suck the oil from an external tank through a hose line!Our pumps therefore only work with flanged tank and in upright installation position, with the intake hole facing downwards. ----------------------------------------------------------------------The model hydraulics may only be operated with hydraulic oil.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 11838

€ 459,99 *

Subscriptions

1 hydraulic pump 12 volts in the truck tank. To 12 bar

1 hydraulic pump 12 volt in the truck tank. Set to 12 bar. 10-16 bar. Gear pump. Height 52mm. Width 42mm. Length 97mm with tank. Incl. filter. H114-12. 12V version! Delivery rate: 200-500ml/min, depending on the set speed. Tank capacity: 85 sq cm (approx. 80 sq cm usable) Delivered ready for installation with filter, tank straps, fastening material, brushless motor and controller. Ideal for tight spaces!

Ready to ship in 8 days, delivery time 1-4 days

Product number: 7394

€ 598,00 *

Subscriptions

1x replacement tank for Leimbach pump H103 and H104, 90mm long

1x replacement tank for Leimbach pump H103 and H104, 90mm long. Hydraulic tank. -Original spare part-. Tank for higher requirements (large cylinders or many cylinders). Scope of delivery:1x tank in the specified length2x screw-in nipple, article 67601x transparent tank cap1x O-ring for tank capMatching hose article 6781

Available immediately, delivery time: 1-4 days

Product number: 10140

€ 34,90 *

Subscriptions

Motor adapter for Faulhaber motors for hydraulic pumps

Motor adapter for Faulhaber motors for hydraulic pumps. Incl. coupling. For Faulhaber motor 3557-12V-50Watt. 0H107.

Available immediately, delivery time: 1-4 days

Product number: 6793

€ 24,50 *

Subscriptions

1x brushless controller for Leimbach pump H114v / r

1x brushless controller for Leimbach pump H114v/r. Forward/reverse controller.

Available immediately, delivery time: 1-4 days

Product number: 9866

€ 120,89 *

Subscriptions

1 hydraulic pump 7,2VoltBL/380 ml/min. Set to 12 bar

1 hydraulic pump 7,2VoltBL/380 ml/min. Set to 12 bar. 10-16 bar. Gear pump. Height 35mm. Width 35mm. Length 155mm with tank. Incl. filter. With angled connections.H103ABL7,2 pump and filter (above) are supplied with the connection nipples H066 (item 6785). Nipples have the following data:Thread: M4Hose connection: 2,5mm, suitable for hose item 6781Total length pump/tank/motor: 120mm without connection flags of the motor. Thread: M4 with SW7Hose connection: 2,5mmHydraulic pump unit with brushless motorThis pump is our standard pump unitH103A, on which our brushless motor (order no. 0H995) is pre-installed at the factory. As with all of our pump units, a filter unit is also included in the scope of delivery. The brushless controller included in the scope of delivery enables continuous control of the speed during operation. This allows the maximum movement speed to be set during operation via remote control by changing the pump's delivery rate. As with the standard pump unit, the operating pressure is preset to approx. 12 bar and can also be increased with the brushless motor up to a maximum of approx. 16 bar.--------------------------------------------------------------------- Due to the high flow speeds at which the oil flows back into the tank and is sucked in again, the oil can foam up. The tank should therefore be as large as possible. Please contact us if you require a larger tank. --------------------------------------------------------------------- Technical data:Speed: 0 to approx. 12.000 rpm (continuously adjustable)Flow rate: approx. 500 ml/min maximum (depending on the set speed)Current consumption: up to 6,5A at 7,2V, 16 bar (depending on the set pressure)Connections for: pressure, return, venting & fillingTank capacity: approx. 27 cc (usable volume)Pressure: up to max. 16 bar (adjustable)----------------------------------------------------------------------ATTENTION!If the hydraulic pump is operated permanently or for a long time at a higher speed, there will be increased wear on the pump, which is not covered by the statutory warranty!--------------------------------------------------------------------------------------------------------------------------------------------This article is included in the hydraulic kit of the LR634 crawler loader.Important note:The installation position of our pumps is crucial to their function!Our pumps cannot pump the oil through a hose line from an external tank! Therefore, our pumps only work with a flanged tank and in an upright installation position, with the suction hole facing downwards. ----------------------------------------------------------------------The model hydraulics may only be operated with hydraulic oil.

Available immediately, delivery time: 1-4 days

Product number: 11840

€ 459,99 *

Subscriptions

Interference suppression capacitors (3 pieces) for Leimbach pump motors

Interference suppression capacitors (3 pieces) for Leimbach pump motors.

Available immediately, delivery time: 1-4 days

Product number: 10996

€ 2,15 *

Subscriptions

1 hydraulic pump for tipper trucks. 0H105. 12V. 200ml / min

1 hydraulic pump for tipping vehicles. 0H105. 12V. 200ml/min. Without filter. Especially for 3-way tippers. Suppression kit included. Suitable for forward/reverse operation. This pump is supplied and operated WITHOUT a filter, as the pump must run forwards and backwards. A small speed controller is required for control. To retract the cylinder, the pump should only run at 30-50% speed!

Available immediately, delivery time: 1-4 days

Product number: 6792

€ 247,00 *

Subscriptions

1 hydraulic pump 12 volt / 200 ml/min. at 12 bar

1 hydraulic pump 12 volt / 200 ml/min. Set to 12 bar. 10-16 bar. Gear pump. Height 35mm, width 35mm. Length 150mm with tank. H102.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 6789

€ 269,90 *

Subscriptions

1 Tank Holder Kit for Leimbach pumps H114xx. The sentence

1 tank holder set for Leimbach pumps H114xx. The set contains all parts for assembling 2 tank/pump holders. Incl. tank bands, rubber pads, fastening material.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 9500

€ 49,49 *

Subscriptions

1 hydraulic pump 12VoltBL/380 ml/min. Set to 12 bar

1 hydraulic pump 12VoltBL/380 ml/min. Set to 12 bar. 10-16 bar. Gear pump. Height 35mm. Width 35mm. Length 155mm with tank. Incl. filter. With straight connections. H103BL12V. Pump and filter (above) are supplied with the connection nipples H062 (item 6784). Nipples have the following data:Thread: M4Hose connection: 2,5mm, suitable for hose item 6781Total length pump/tank/motor: 120mm without connection flags of the motor. Thread: M4 with SW7Hose connection: 2,5mmHydraulic pump unit with brushless motorThis pump is our standard pump unit H103, on which our brushless motor (order no. 0H995) is pre-installed at the factory. As with all of our pump units, a filter unit is also included in the scope of delivery. The brushless controller included in the scope of delivery enables continuous control of the speed during operation. This allows the maximum movement speed to be set during operation via remote control by changing the pump's delivery rate. As with the standard pump unit, the operating pressure is preset to approx. 12 bar and can also be increased with the brushless motor up to a maximum of approx. 16 bar.--------------------------------------------------------------------- Due to the high flow speeds at which the oil flows back into the tank and is sucked in again, the oil can foam up. The tank should therefore be as large as possible. Please contact us if you require a larger tank. --------------------------------------------------------------------- Technical data:Speed: 0 to approx. 12.000 rpm (continuously adjustable)Flow rate: approx. 500 ml/min maximum (depending on the set speed)Current consumption: up to 6,5A at 7,2V, 16 bar (depending on the set pressure)Connections for: pressure, return, venting & fillingTank capacity: approx. 27 cc (usable volume)Pressure: up to max. 16 bar (adjustable)----------------------------------------------------------------------ATTENTION!If the hydraulic pump is operated permanently or for a long time at a higher speed, there will be increased wear on the pump, which is not covered by the statutory warranty!--------------------------------------------------------------------------------------------------------------------------------------------Important note:The installation position is crucial for the function of our pumps!Our pumps cannot suck the oil from an external tank through a hose line!Our pumps therefore only work with flanged tank and in upright installation position, with the intake hole facing downwards. ----------------------------------------------------------------------The model hydraulics may only be operated with hydraulic oil.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 11837

€ 445,00 *

Subscriptions

1 replacement motor for Leimbach pump H102 or H105. For 7,2-

1 replacement motor for Leimbach pump H102 or H105. For 7,2-12V. With suppressor material. Suitable for H102 (old version) with shortened shaft!

Ready to ship in 8 days, delivery time 1-4 days

Product number: 11040

€ 27,50 *

Subscriptions

1 hydraulic pump 7,2VoltBL/380 ml/min. Set to 12 bar

1 hydraulic pump 7,2VoltBL/380 ml/min. Set to 12 bar. 10-16 bar. Gear pump. Height 35mm. Width 35mm. Length 155mm with tank. Incl. filter. With straight connections. H103BL7,2V. Pump and filter (above) are supplied with the connection nipples H062 (item 6784). Nipples have the following data:Thread: M4Hose connection: 2,5mm, suitable for hose item 6781Total length pump/tank/motor: 120mm without connection flags of the motor. Thread: M4 with SW7Hose connection: 2,5mmHydraulic pump unit with brushless motorThis pump is our standard pump unit H103, on which our brushless motor (order no. 0H995) is pre-installed at the factory. As with all of our pump units, a filter unit is also included in the scope of delivery. The brushless controller included in the scope of delivery enables continuous control of the speed during operation. This allows the maximum movement speed to be set during operation via remote control by changing the pump's delivery rate. As with the standard pump unit, the operating pressure is preset to approx. 12 bar and can also be increased with the brushless motor up to a maximum of approx. 16 bar.--------------------------------------------------------------------- Due to the high flow speeds at which the oil flows back into the tank and is sucked in again, the oil can foam up. The tank should therefore be as large as possible. Please contact us if you require a larger tank. --------------------------------------------------------------------- Technical data:Speed: 0 to approx. 12.000 rpm (continuously adjustable)Flow rate: approx. 500 ml/min maximum (depending on the set speed)Current consumption: up to 6,5A at 7,2V, 16 bar (depending on the set pressure)Connections for: pressure, return, venting & fillingTank capacity: approx. 27 cc (usable volume)Pressure: up to max. 16 bar (adjustable)----------------------------------------------------------------------ATTENTION!If the hydraulic pump is operated permanently or for a long time at a higher speed, there will be increased wear on the pump, which is not covered by the statutory warranty!--------------------------------------------------------------------------------------------------------------------------------------------Important note:The installation position is crucial for the function of our pumps!Our pumps cannot suck the oil from an external tank through a hose line!Our pumps therefore only work with flanged tank and in upright installation position, with the intake hole facing downwards. ----------------------------------------------------------------------The model hydraulics may only be operated with hydraulic oil.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 11839

€ 445,00 *

Subscriptions