Screw-in nipple

1 screw-M3 / 2,5. In keeping with the hose Item

1 screw-in nipple M3/2,5. Suitable for hose item no. 6781 (Leimbach hose H058). 0H023. This nipple fits the Leimbach hydraulic system.

Available immediately, delivery time: 1-4 days

Product number: 6760

€ 3,61 *

Subscriptions

1 screw-M3 / 1,5. In keeping with the hose Item

1 screw-in nipple M3/1,5mm. Suitable for hose item no. 6776 (Leimbach hose H052). 0H022. This nipple fits the Leimbach hydraulic system.

Available immediately, delivery time: 1-4 days

Product number: 6759

€ 3,61 *

Subscriptions

1 Angled nipple M3 / 2,5. Suitable for Hose

1 Angled nipple M3/1,5. Suitable for hose article no. 6776. 0H035. Overall dimensions: length 10mm, width 5mm, height: 7/8,5mm. This nipple fits the Leimbach hydraulic system.

Available immediately, delivery time: 1-4 days

Product number: 6766

€ 7,50 *

Subscriptions

1 screw-M3 / 1,0mm. In keeping with the hose Item

1 screw-in nipple M3/1,0mm. Suitable for hose item no. 7829 (Leimbach hose H050). 0H032. Through hole 0,7mm. This nipple fits the Leimbach hydraulic system.

Available immediately, delivery time: 1-4 days

Product number: 7830

€ 3,95 *

Subscriptions

ScaleART nipple straight, made of stainless steel, for 3mm hose

ScaleART straight nipple, made of stainless steel, for 3mm hose. Incl. union. Connection thread M3. New article 10/2020. Straight nipple 3mm including unionScope of delivery: 1 straight nipple 3mm 1 union 3mm 1 hollow screw M3 1x sealing washer The hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The visually and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily assembled and, above all, disassembled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections.Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.!Suitable hose: Article 11971.Suitable union wrench: Article 12024.Successor article for article 10573.

Available immediately, delivery time: 1-4 days

Product number: 12031

€ 6,90 *

Subscriptions

ScaleART nipple angled 90 °, made of stainless steel, for 3mm

ScaleART nipple angled 90°, made of stainless steel, for 3mm hose. Incl. union. Connection thread M3. New article 10/2020. Angled nipple 3mm incl. unionScope of delivery:1 angled nipple 3mm1 union 3mm1 hollow screw M32x sealing washerThe hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The optically and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily installed and, above all, dismantled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be reused without having to shorten them. All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections. Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.! Matching hose: article 11971. Matching union wrench: article 12024. Successor to article 10572.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 12028

€ 10,00 *

Subscriptions

1 Angled nipple M3 / 1,0. Suitable for Hose

1 angled nipple M3/1,0. Suitable for the hose item no. 7829 (Leimbach hose H050). 0H034 This nipple fits the Leimbach hydraulic system.

Available immediately, delivery time: 1-4 days

Product number: 8985

€ 7,98 * € 7,99 * (0.13% saved)

Subscriptions

1 screw-M4 / 2,5 mm. Suitable for Hose

1 screw-in nipple M4/2,5 mm. Suitable for hose article no. 6781 (Leimbach hose H058). 0H062 This nipple fits the Leimbach hydraulic system. Data: Thread: M4 with SW7 Hose connection: 2,5 mm

Available immediately, delivery time: 1-4 days

Product number: 6784

€ 3,75 *

Subscriptions

ScaleART nipple straight, made of stainless steel, for 4x2,5mm hose

ScaleART straight nipple, made of stainless steel, for 4x2,5mm hose. Incl. union. Connection thread M3. New article 10/2020. Straight nipple 4mm including unionScope of delivery: 1 straight nipple 4mm 1 union 4mm 1 hollow screw M3 1x sealing washer The hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The visually and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily assembled and, above all, disassembled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections.Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.Matching hose 4x2,5mm: Article 12020.Matching union wrench: Article 12025.

Available immediately, delivery time: 1-4 days

Product number: 12041

€ 6,90 *

Subscriptions

1 Angled nipple M4 / 2,5 mm. Suitable for Hose

1 angled nipple M4/2,5 mm. Suitable for the hose item no. 6781 (Leimbach hose H058). H066. This nipple fits the Leimbach hydraulic system. Data: Thread: M4 with SW7 hose connection: 2,5mm

Available immediately, delivery time: 1-4 days

Product number: 6785

€ 7,50 *

Subscriptions

ScaleART nipple angled 90 °, made of stainless steel, for 4x2,5mm

ScaleART nipple angled 90°, made of stainless steel, for 4x2,5mm hose. Incl. union. Connection thread M3. New article 10/2020. Angled nipple 4mm including unionScope of delivery: 1 angled nipple 4mm 1 union 4mm 1 hollow screw M3 2x sealing washer The hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The visually and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily assembled and, above all, disassembled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections.Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.Matching hose 4x2,5mm: Article 12020.Matching union wrench: Article 12025.

Available immediately, delivery time: 1-4 days

Product number: 12035

€ 10,20 *

Subscriptions

ScaleART union nut for 3mm hose.

ScaleART union nut for 3mm hose. Union nut for 3mm hose.Scope of delivery: 1 union nut 3mm The hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This allows higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The optically and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily installed and, above all, removed again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. Double connections can also be made using the two available sleeve screws (short and long). Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.! Matching hose: Article 11971. Matching union wrench: Article 12024.

Available immediately, delivery time: 1-4 days

Product number: 12029

€ 1,90 *

Subscriptions

ScaleART nipple straight incl. union for 3mm hose

ScaleART nipple straight, with sealing washer, including D3 union for 3mm hose. Thread M3. The matching hydraulic hose has the item number 10577. Item 10572 is available as an angled nipple.

Available immediately, delivery time: 1-4 days

Product number: 10573

€ 5,95 *

Subscriptions

ScaleART straight nipple, made of stainless steel, for 2mm hose. I

ScaleART straight nipple, made of stainless steel, for 2mm hose. Incl. union. Connection thread M3. New article 10/2020. Straight nipple 2mm including unionScope of delivery: 1 straight nipple 2mm 1 union 2mm 1 hollow screw M3 2x sealing washer The hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The visually and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily assembled and, above all, disassembled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections.Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.!Suitable hose: Article 10571.Suitable union wrench: Article 12023.

Available immediately, delivery time: 1-4 days

Product number: 12026

€ 8,43 *

Subscriptions

Screw-in nipple M5 / 2,0. (1,5-2,0mm) Suitable for Leimbach

1 screw-in nipple M5/2,0. (1,5-2,0mm) Suitable for hose item no. 6776 (Leimbach hose H052). 0H024. Discontinued item! This nipple fits the Leimbach hydraulic system. No longer available after sale!

Available immediately, delivery time: 1-4 days

Product number: 6761

€ 4,59 *

Subscriptions

ScaleART union nut for 4mm hose.

ScaleART union nut for 4mm hose. Union nut for 4mm hose.Scope of delivery: 1 union 4mm The hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This allows higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The optically and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily installed and, above all, removed again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections. Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.! Matching hose: Article 12019, 12020. Matching union wrench: Article 12025.

Available immediately, delivery time: 1-4 days

Product number: 12030

€ 1,59 *

Subscriptions

1 screw-M5 / 3,0. In keeping with the hose Item

1 screw-in nipple M5/3,0. Suitable for hose item no. 6781 (Leimbach hose H058). 0H025. DISCONTINUED ITEM! This nipple fits the Leimbach hydraulic system. Item is no longer available after sale!

No longer available

Product number: 6762

€ 3,86 *

Subscriptions

Details

ScaleART nipple straight, made of stainless steel, for 4x2mm hose

ScaleART straight nipple, made of stainless steel, for 4x2mm hose. Incl. union. Connection thread M3. New article 10/2020. Straight nipple 4mm including unionScope of delivery: 1 straight nipple 4mm 1 union 4mm 1 hollow screw M3 1x sealing washer The hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The visually and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily assembled and, above all, disassembled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections.Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.Matching hose 4x2mm: Article 12019.Matching union wrench: Article 12025.

Available immediately, delivery time: 1-4 days

Product number: 12033

€ 6,90 *

Subscriptions

ScaleART nipple angled 90 °, made of stainless steel, for 2mm socket

ScaleART nipple angled 90°, made of stainless steel, for 2mm hose. Incl. union. Connection thread M3. New article 10/2020. Angled nipple 2mm including unionScope of delivery: 1 angled nipple 2mm 1 union 2mm 1 hollow screw M3 2x sealing washer The hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The visually and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily assembled and, above all, disassembled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections.Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.!Suitable hose: Article 10571.Suitable union wrench: Article 12023.

Available immediately, delivery time: 1-4 days

Product number: 12021

€ 10,00 *

Subscriptions

1 screw-M5 / 2,5 mm. Suitable for Hose

1 screw-in nipple M5/2,5 mm. Suitable for hose article number 6781 (Leimbach hose H058). 0H057. DISCONTINUED ITEM! This nipple fits the Leimbach hydraulic system. No longer available after sale.

Available immediately, delivery time: 1-4 days

Product number: 6780

€ 4,50 *

Subscriptions

ScaleART nipple angled 90 °, made of stainless steel, for 4x2mm

ScaleART nipple angled 90°, made of stainless steel, for 4x2mm hose. Incl. union. Connection thread M3. New article 10/2020. Angled nipple 4mm incl. unionScope of delivery:1 angled nipple 4mm1 union 4mm1 hollow screw M32x sealing washerThe hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This enables higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The optically and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily assembled and, above all, disassembled again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be reused without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. The two available sleeve screws (short and long) can also be used to create double connections.Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally completely eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.!Suitable hose 4x2mm: Article 12019.Suitable union wrench: Article 12025.

Available immediately, delivery time: 1-4 days

Product number: 12032

€ 10,10 *

Subscriptions

ScaleART tool key for 3mm union. Combined G

ScaleART tool wrench for 3mm coupling. Combined open-end/ring wrench for 3mm coupling. Made of stainless steel, lasered. New article 10/2020.

Available immediately, delivery time: 1-4 days

Product number: 12024

€ 10,20 *

Subscriptions

ScaleART tool key for 4mm union. Combined G

ScaleART tool wrench for 4mm coupling. Combined open-end/ring wrench for 4mm coupling. Made of stainless steel, lasered. New article 10/2020.

Available immediately, delivery time: 1-4 days

Product number: 12025

€ 10,20 *

Subscriptions

ScaleART union nut for 2mm hose.

ScaleART union nut for 2mm hose. Union nut for 2mm hose.Scope of delivery: 1 union nut 2mm The hydraulic connection nipples from ScaleART are an absolute novelty!In contrast to the previous and commercially available connection nipples, these are not made of brass but of stainless steel! This allows higher tightening torques, which in turn guarantee greater durability, reliability and tightness of the connections. Threads that are quickly worn or over-tightened are now a thing of the past!The optically and technically very cleanly manufactured components offer another and decisive advantage:The union nuts that replaced the previous sleeves can be easily installed and, above all, removed again using a thread. This means that installed hoses can be removed from the hydraulic nipple without damage and can be used again without having to shorten them.All new connection nipples, regardless of whether they are for 2mm, 3mm or 4mm hoses, are provided with an M3 connection thread. Double connections can also be made using the two available sleeve screws (short and long). Simple assembly is made possible using tools specially developed for assembly that resemble a ring/open-end wrench. This finally eliminates the annoying and cumbersome handling of pliers, sandpaper, etc.! Matching hose: Article 10571. Matching union wrench: Article 12023.

Available immediately, delivery time: 1-4 days

Product number: 12027

€ 1,59 *

Subscriptions

ScaleART nipple straight incl. union for 4mm hose

ScaleART nipple straight, including D4 union for 4mm hose. Thread M3. DISCONTINUED ITEM! The matching hydraulic hose has the item number 10576. Item 10574 is available as an angled nipple.

Available immediately, delivery time: 1-4 days

Product number: 10575

€ 5,30 *

Subscriptions

ScaleART tool key for 2mm union. Combined G

ScaleART tool key for 2mm union. Combined fork / ring spanner for 2mm union. Made of stainless steel, lasered. New article 10/2020.

Available immediately, delivery time: 1-4 days

Product number: 12023

€ 10,20 *

Subscriptions