Hydraulik Ventile-Leimbach

1 knurled screw for Leimbach valves. For adjustment

1 knurled screw for Leimbach valves. For adjustment.

Available immediately, delivery time: 1-4 days

Product number: 9063

€ 2,95 *

Subscriptions

1 hydraulic control valve 2 times until 10bar. Dimensions (without

1 hydraulic control valve, 2-way, up to 10 bar. Dimensions (without connection nipple): 43x29,5x24mm. 0H502 The following connection nipples are installed as standard:H022 for connections A/B (cylinder)H023 for connections P/T (pump and tank)With this directional control valve, a proportional control of the hydraulic cylinders is possible. The control valves are designed to accommodate a miniature servo. We recommend the servo with our article number 1708.

Available immediately, delivery time: 1-4 days

Product number: 6799

€ 167,50 *

Subscriptions

1 hydraulic control valve 1 times until 10bar. Dimensions (without

1 hydraulic control valve, 1-way, up to 10 bar. Dimensions (without connection nipple): 43x29,5x12mm. 0H501 connection P+T=H023, cylinder A+B=H022 The following connection nipples are installed as standard:H022 for connections A/B (cylinder)H023 for connections P/T (pump and tank)With this directional control valve, proportional control of the hydraulic cylinders is possible. The control valves are designed to accommodate a miniature servo. We recommend the servo with our article number 1708.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 6798

€ 89,50 *

Subscriptions

1 hydraulic control valve 3 times until 10bar. Dimensions (without

1 hydraulic control valve, 3-way, up to 10 bar. Dimensions (without connection nipple): 43x29,5x36mm. 0H503 The following connection nipples are installed as standard:H022 for connections A/B (cylinder)H023 for connections P/T (pump and tank)With this directional control valve, a proportional control of the hydraulic cylinders is possible. The control valves are designed to accommodate a miniature servo. We recommend the servo with our article number 1708.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 6800

€ 250,00 *

Subscriptions

Micro-hydraulic control valve 3-fold until 10bar 43x19x27mm

1 micro hydraulic control valve 3-way, up to 10 bar. Dimensions (without connection nipple): 43,5x19,2x27mm. 0H403. Connection P+T=H023, cylinder A+B=H022. These new micro control valves have the same properties as the previous valves in the "normal" size. However, the size is significantly reduced in comparison, which can be a great advantage, especially for complex models with many hydraulic functions or very small models with limited space. The following connection nipples are installed as standard: H022 for connections A/B (cylinder) H023 for connections P/T (pump and tank) This directional valve enables proportional control of the hydraulic cylinders. The control valves are designed to accommodate miniature servos. We recommend the servo with our article number 8845.

Available immediately, delivery time: 1-4 days

Product number: 11555

€ 285,01 *

Subscriptions

1x hydraulic control valve 4 times until 10bar. Dimensions (without

1x hydraulic control valve 4-way, up to 10 bar. Dimensions (without connection nipple): 43x29,5x48mm. 0H504. The following connection nipples are installed as standard:H022 for connections A/B (cylinder)H023 for connections P/T (pump and tank)With this directional control valve, proportional control of the hydraulic cylinders is possible. The control valves are designed to accommodate a miniature servo. We recommend the servo with our article number 1708.

Available immediately, delivery time: 1-4 days

Product number: 6801

€ 335,00 *

Subscriptions

Micro-hydraulic control valve 1-fold until 10bar 43,5x19x9mm

1 micro hydraulic control valve, 1-way, up to 10 bar. Dimensions (without connection nipple): 43,5x19,1x9mm. 0H401 connection P+T=H023, cylinder A+B=H022 These new micro control valves have the same properties as the previous valves in the "normal" size. However, the size is significantly reduced in comparison, which can be a great advantage, especially for complex models with many hydraulic functions or very small models with limited space. The following connection nipples are installed as standard: H022 for connections A/B (cylinder) H023 for connections P/T (pump and tank) This directional valve enables proportional control of the hydraulic cylinders. The control valves are designed to accommodate a miniature servo. We recommend the servo with our article number 8845.

Available immediately, delivery time: 1-4 days

Product number: 11553

€ 95,00 *

Subscriptions

Micro-hydraulic control valve 2-fold until 10bar 43x19x18mm

1 micro hydraulic control valve 2-way, up to 10 bar. Dimensions (without connection nipple): 43,5x19,2x18mm. 0H402. Connection P+T=H023, cylinder A+B=H022. These new micro control valves have the same properties as the previous valves in the "normal" size. However, the size is significantly reduced in comparison, which can be a great advantage, especially for complex models with many hydraulic functions or very small models with limited space. The following connection nipples are installed as standard: H022 for connections A/B (cylinder) H023 for connections P/T (pump and tank) This directional valve enables proportional control of the hydraulic cylinders. The control valves are designed to accommodate miniature servos. We recommend the servo with our article number 8845.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 11554

€ 190,00 *

Subscriptions

1 hydraulic control valve 5 times until 10bar. Dimensions (without

1 hydraulic control valve, 5-way, up to 10 bar. Dimensions (without connection nipple): 43x29,5x60mm. 0H505 The following connection nipples are installed as standard:H022 for connections A/B (cylinder)H023 for connections P/T (pump and tank)With this directional control valve, a proportional control of the hydraulic cylinders is possible. The control valves are designed to accommodate a miniature servo. We recommend the servo with our article number 1708.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 6802

€ 419,00 *

Subscriptions

1 hydraulic control valve, double, up to 2bar. Dimensions (without conn

1 hydraulic control valve, double, up to 2bar. Dimensions (without connecting nipple): 10x43x29,5mm. 24H0. DRILLED - for flanging onto existing valve block.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 11671

€ 141,75 *

Subscriptions

Cover (dummy tank) for 8-way control valve block

Cover (tank dummy) for 8-way control valve block made of aluminum sheet. Suitable for valve block 6805 (not included). Length: 122mm. Accessory for model hydraulics from Leimbach. Tank cover to make the valve block attached to the side of the frame look a little more pleasing. The cover is available in several lengths (suitable for various valve block sizes). The vehicles or vehicle parts shown are for illustration purposes only and are NOT included in the scope of delivery! Dimensions for 8-way dummy: Length: 122mm Height: 48mm Depth: 55mm

Ready to ship in 8 days, delivery time 1-4 days

Product number: 12328

€ 20,40 *

Subscriptions

Cover (dummy tank) for 9-way control valve block

Cover (tank dummy) for 9-way control valve block made of aluminum sheet. Suitable for valve block 7296 (not included). Accessory for model hydraulics from Leimbach. Tank cover to make the valve block attached to the side of the frame look a little more pleasing. The cover is available in several lengths (suitable for various valve block sizes). The vehicles or vehicle parts shown are for illustration purposes only and are NOT included in the scope of delivery! Dimensions for 9-way dummy: Length: 135mm Height: 48mm Depth: 55mm

Ready to ship in 8 days, delivery time 1-4 days

Product number: 12329

€ 22,60 *

Subscriptions

Micro-hydraulic control valve 6-fold until 10bar 43x19x54mm

1 micro hydraulic control valve 6-way, up to 10 bar. Dimensions (without connection nipple): 43,5x19,2x54mm. 0H406. Connection P+T=H023, cylinder A+B=H022. These new micro control valves have the same properties as the previous valves in the "normal" size. However, the size is significantly reduced in comparison, which can be a great advantage, especially for complex models with many hydraulic functions or very small models with limited space. The following connection nipples are installed as standard: H022 for connections A/B (cylinder) H023 for connections P/T (pump and tank) This directional valve enables proportional control of the hydraulic cylinders. The control valves are designed to accommodate miniature servos. We recommend the servo with our article number 8845.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 11558

€ 570,00 *

Subscriptions

Cover (dummy tank) for 6-way control valve block

Cover (tank dummy) for 6-way control valve block made of aluminum sheet. Suitable for valve block 6803 (not included). Length: 98mm. Accessory for model hydraulics from Leimbach. Tank cover to make the valve block attached to the side of the frame look a little more pleasing. The cover is available in several lengths (suitable for various valve block sizes). The vehicles or vehicle parts shown are for illustration purposes only and are NOT included in the scope of delivery!

Ready to ship in 8 days, delivery time 1-4 days

Product number: 12327

€ 18,00 *

Subscriptions

1 hydraulic control valve 6 times until 10bar. Dimensions (without

1 hydraulic control valve 6-way, up to 10 bar. Dimensions (without connection nipple): 43x29,5x72mm. 0H506. The following connection nipples are installed as standard:H022 for connections A/B (cylinder)H023 for connections P/T (pump and tank)With this directional control valve, a proportional control of the hydraulic cylinders is possible. The control valves are designed to accommodate a miniature servo. We recommend the servo with our article number 1708.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 6803

€ 503,00 *

Subscriptions

Micro-hydraulic control valve 4-fold until 10bar 43x19x36mm

1 micro hydraulic control valve 4-way, up to 10 bar. Dimensions (without connection nipple): 43,5x19,2x36mm. 0H404. Connection P+T=H023, cylinder A+B=H022. These new micro control valves have the same properties as the previous valves in the "normal" size. However, the size is significantly reduced in comparison, which can be a great advantage, especially for complex models with many hydraulic functions or very small models with limited space. The following connection nipples are installed as standard: H022 for connections A/B (cylinder) H023 for connections P/T (pump and tank) This directional valve enables proportional control of the hydraulic cylinders. The control valves are designed to accommodate miniature servos. We recommend the servo with our article number 8845.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 11556

€ 380,00 *

Subscriptions

Micro-hydraulic control valve 8-fold until 10bar 43x19x72mm

1 Micro Hydraulic Control Valve 8-fold, up to 10bar. Dimensions (without connection nipple): 43,5x19,2x72mm. 0H408. Connection P + T = H023, cylinder A + B = H022.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 11560

€ 760,01 *

Subscriptions

1 hydraulic control valve 8 times until 10bar. Dimensions (without

1 hydraulic control valve 8-way, up to 10 bar. Dimensions (without connection nipple): 43x29,5x96mm. 0H508. The following connection nipples are installed as standard:H022 for connections A/B (cylinder)H023 for connections P/T (pump and tank)With this directional control valve, a proportional control of the hydraulic cylinders is possible. The control valves are designed to accommodate a miniature servo. We recommend the servo with our article number 1708.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 6805

€ 670,01 *

Subscriptions

Micro-hydraulic control valve 5-fold until 10bar 43x19x45mm

1 micro hydraulic control valve 5-way, up to 10 bar. Dimensions (without connection nipple): 43,5x19,2x45mm. 0H405. Connection P+T=H023, cylinder A+B=H022. These new micro control valves have the same properties as the previous valves in the "normal" size. However, the size is significantly reduced in comparison, which can be a great advantage, especially for complex models with many hydraulic functions or very small models with limited space. The following connection nipples are installed as standard: H022 for connections A/B (cylinder) H023 for connections P/T (pump and tank) This directional valve enables proportional control of the hydraulic cylinders. The control valves are designed to accommodate miniature servos. We recommend the servo with our article number 8845.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 11557

€ 475,00 *

Subscriptions

Micro-hydraulic control valve 7-fold until 10bar 43x19x63mm

1 micro hydraulic control valve 7-way, up to 10 bar. Dimensions (without connection nipple): 43,5x19,2x63mm. 0H407. Connection P+T=H023, cylinder A+B=H022. These new micro control valves have the same properties as the previous valves in the "normal" size. However, the size is significantly reduced in comparison, which can be a great advantage, especially for complex models with many hydraulic functions or very small models with limited space. The following connection nipples are installed as standard: H022 for connections A/B (cylinder) H023 for connections P/T (pump and tank) This directional valve enables proportional control of the hydraulic cylinders. The control valves are designed to accommodate miniature servos. We recommend the servo with our article number 8845.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 11559

€ 665,00 *

Subscriptions

Covering (dummy tank) for hydraulic control valves

Cover (tank dummy) for 2-way control valve block made of aluminum sheet. Suitable for valve block 6799 (not included). Length: 50mm. Accessory for model hydraulics from Leimbach. Tank cover to make the valve block attached to the side of the frame look a little more pleasing. The cover is available in several lengths (suitable for various valve block sizes). The vehicles or vehicle parts shown are for illustration purposes only and are NOT included in the scope of delivery!

Available immediately, delivery time: 1-4 days

Product number: 12097

€ 14,49 * € 14,50 * (0.07% saved)

Subscriptions

Cover (dummy tank) for 3-way control valve block

Cover (tank dummy) for 3-way control valve block made of aluminum sheet. Suitable for valve block 6800 (not included). Accessory for model hydraulics from Leimbach. Tank cover to make the valve block attached to the side of the frame look a little more pleasing. The cover is available in several lengths (suitable for various valve block sizes). The vehicles or vehicle parts shown are for illustration purposes only and are NOT included in the scope of delivery!

Ready to ship in 8 days, delivery time 1-4 days

Product number: 12325

€ 15,90 *

Subscriptions

Cover (dummy tank) for 4-way control valve block

Cover (tank dummy) for 4-way control valve block made of aluminum sheet. Suitable for valve block 6801 (not included). Accessory for model hydraulics from Leimbach. Tank cover to make the valve block attached to the side of the frame look a little more pleasing. The cover is available in several lengths (suitable for various valve block sizes). The vehicles or vehicle parts shown are for illustration purposes only and are NOT included in the scope of delivery!

Ready to ship in 8 days, delivery time 1-4 days

Product number: 12326

€ 16,90 *

Subscriptions

1 hydraulic control valve 7 times until 10bar. Dimensions (without

1 hydraulic control valve 7-way, up to 10 bar. Dimensions (without connection nipple): 43x29,5x84mm. 0H507. The following connection nipples are installed as standard:H022 for connections A/B (cylinder)H023 for connections P/T (pump and tank)With this directional control valve, a proportional control of the hydraulic cylinders is possible. The control valves are designed to accommodate a miniature servo. We recommend the servo with our article number 1708.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 6804

€ 586,50 *

Subscriptions

1 hydraulic control valve 9 times until 10bar. Dimensions (without

1 hydraulic control valve 9-way, up to 10 bar. Dimensions (without connection nipple): 43x29,5x108mm. 0H509. The following connection nipples are installed as standard:H022 for connections A/B (cylinder)H023 for connections P/T (pump and tank)With this directional control valve, a proportional control of the hydraulic cylinders is possible. The control valves are designed to accommodate a miniature servo. We recommend the servo with our article number 1708.

Ready to ship in 8 days, delivery time 1-4 days

Product number: 7296

€ 619,00 *

Subscriptions