Go to home page
€ 0,00 *
Filter
LED orange 1,8mm, orange diffused housing Leaded
LED orange 1,8mm, orange diffused housing Leaded
LED orange 1,8mm leaded orange diffused housing. Luminosity: 15 mcd Viewing Angle: 70 ° I = 20mA, U = 2,2V

Available immediately, delivery time: 1-4 days

Product number: 6335

€ 0,23 *
1x LED white 3mm, crystal clear housing, wired, super bright
1x LED white 3mm, crystal clear housing, wired, super bright
1x LED white 3mm, crystal clear housing, wired, super bright. Brightness: 2500 mcd Viewing Angle: 45 ° I = 20mA, U = 3,5V

Available immediately, delivery time: 1-4 days

Product number: 6339

€ 0,48 *
1x LED yellow (rectangular design 2,5 x 5mm) KINGBRIGHT
1x LED yellow (rectangular design 2,5 x 5mm) KINGBRIGHT
1x yellow LED (rectangular design 2,5 x 5mm) KINGBRIGHT L-383YDT max.8mA, 2,0-2,5 V. Diffuse yellow housing. Ideal for side lighting.

Available immediately, delivery time: 1-4 days

Product number: 1946

€ 0,39 *
1x SMD LED orange (SMD design 0805) with soldered
1x SMD LED orange (SMD design 0805) with soldered
1x SMD-LED orange (SMD design 0805) with soldered wires. 2x1,25mm, 120° beam angle, 300mcd, very small design. Delivery includes 1x SMD-LED, 1x soldered resistor. Thanks to the soldered cables, even model makers who are "at war" with soldering these small components can now use the advantages of these tiny things! -minimal space requirement (light surface 2x1,25mm) -very low power consumption (max. 10mA) -high luminosity -very low heating With these SMD-LEDs, resistors are soldered into the supply line on the anode side (PLUS POLE) (1kOhm). This means that this LED is ready for connection to a 7,2-16V supply voltage!

Available immediately, delivery time: 1-4 days

Product number: 6393

€ 1,70 *
1x SMD-LED white (SMD design 0805) with soldered wire
1x SMD-LED white (SMD design 0805) with soldered wire
1x SMD-LED white (SMD design 0805) with soldered wires. 2x1,25mm, 120° beam angle, 300mcd, very small design. Thanks to the soldered cables, even model makers who are "at war" with soldering these small components can now take advantage of the benefits of these tiny things! -minimal space requirement (light surface 2x1,25mm) -very low power consumption (max. 10mA) -high luminosity -very low heating With these SMD LEDs, resistors are soldered into the supply line on the anode side (PLUS POLE) (1,5kOhm). This means that this LED is ready for connection to a 7,2-16V supply voltage!

Available immediately, delivery time: 1-4 days

Product number: 6340

€ 1,79 *
Contour light, orange, Hella, M 1/14. 8,5 x 4mm
Contour light, orange, Hella, M 1/14. 8,5 x 4mm
Contour light, orange, Hella, M 1/14. 8,5 x 4mm. Lens and base body are glued together. Suitable for fitting with individual SMDs. We recommend using individual SMDs in ORANGE for lighting, article 6393 or 10386. These LEDs prevent an unnaturally bright spot, as can occur when using white LEDs.

No longer available

Product number: 12304

€ 2,99 *
Details
1x LED white 1,8mm, clear housing, wired
1x LED white 1,8mm, clear housing, wired
1x LED white 1,8mm, crystal clear housing, wired. Xenon effect. Luminous intensity: 2200 mcd Beam angle: 50° I=20mA, U=3,5V

Available immediately, delivery time: 1-4 days

Product number: 6332

€ 0,39 *
1x LED warm white 1,8mm, crystal clear housing Leaded
1x LED warm white 1,8mm, crystal clear housing Leaded
1x LED warm white 1,8mm, crystal clear housing, wired. Luminosity: 2800 mcd Viewing Angle: 60 ° I = 20mA, U = 3,5V

Available immediately, delivery time: 1-4 days

Product number: 6346

€ 0,35 *
1x SMD LED red (SMD design 0805) with soldered strands
1x SMD LED red (SMD design 0805) with soldered strands
1x SMD-LED red (SMD design 0805) with soldered wires. 2x1,25mm, 120° beam angle, 15mcd, very small design. LED data: 2,7V max.10mA! Thanks to the soldered cables, even model makers who are "at war" with soldering these small components can now take advantage of the benefits of these tiny things! -minimal space requirement (light surface 2x1,25mm) -very low power consumption (max. 10mA) -high luminosity -very low heating With these SMD LEDs, resistors are soldered into the supply line on the anode side (PLUS POLE) (1kOhm). This means that this LED is ready for connection to a 7,2-16V supply voltage!

Available immediately, delivery time: 1-4 days

Product number: 6341

€ 1,70 *
1x LED warm white 3mm, crystal clear housing Leaded
1x LED warm white 3mm, crystal clear housing Leaded
1x LED warm white 3mm, crystal clear housing Leaded, warm white. Luminosity: 10000 mcd Viewing Angle: 20 °. For operation on 4-19V NO series resistor is necessary!

Available immediately, delivery time: 1-4 days

Product number: 6367

€ 1,20 *
1x SMD LED yellow (SMD design 0805) with soldered strands
1x SMD LED yellow (SMD design 0805) with soldered strands
1x SMD-LED yellow (SMD design 0805) with soldered wires. 2x1,25mm, 120° beam angle, 300mcd, very small design. Thanks to the soldered cables, even model makers who are "at war" with soldering these small components can now take advantage of the benefits of these tiny things! -minimal space requirement (light surface 2x1,25mm) -very low power consumption (max. 10mA) -high luminosity -very low heating With these SMD LEDs, resistors are soldered into the supply line on the anode side (PLUS POLE) (1kOhm). This means that this LED is ready for connection to a 7,2-16V supply voltage!

Ready to ship in 5 days, delivery time 1-4 days

Product number: 6347

€ 1,70 *
Beacon, orange, and with integrated electronics
Beacon, orange, and with integrated electronics
Rotating beacon, orange, with integrated electronics and SMD LEDs, threaded base M5, square cover, scale 1/16, 4-12V 2-wire connection, approx. 35mA, 160 rpm. H=14,5mm, D=10mm. Wide voltage range 4-12V. True-to-original function. Innovative LED technology. Integrated electronics. Two-wire connection. Long service life. Easy to install. Maintenance-free. Scale look. MS pipe 3x0,3mm (item 2326) is suitable for the STECK base! We are now supplying version 2! Would you like to switch this rotating beacon on and off with the remote control? No problem! We recommend a simple and inexpensive memory switch - the PS4a (item 3022). This switch gives you 4 separately switchable outputs! So you can use it to turn this rotating beacon and 3 other light functions on and off!

Available immediately, delivery time: 1-4 days

Product number: 4957

Ab € 35,00 *
Details
%
Boards for 7 chamber taillights 7,2V. 1 pair (1x left,
Boards for 7 chamber taillights 7,2V. 1 pair (1x left,
Circuit boards for 7-chamber rear lights 7,2V. 1 pair (1x left, 1x right), trailer, fitted with SMD LEDs, common plus pole, 5 light functions, BLUE identification. Necessary resistors are integrated! Matching article 1905 - 7-chamber rear light. The insulated individual connection wires are color-coded: Wire length approx. 18cm. Red = common plus pole White = rear light Black = brake light Gray = right indicator Yellow = left indicator Green = reversing light Blue = rear fog light When using these lighting circuit boards, the following light functions are possible.

Available immediately, delivery time: 1-4 days

Product number: 3104

€ 37,00 * € 39,90 * (7.27% saved)
%
7-chamber rear light unit (1 pair) without board. Dimensions
7-chamber rear light unit (1 pair) without board. Dimensions
7-chamber rear light unit (1 pair) without circuit board. Overall dimensions: 32x12x7mm The base body is chrome-plated on the inside. (500907037) Instructions can be downloaded here. Suitable lighting circuit boards in SMD technology can be found under item number 3103 (for 12V) or 3104 (for 7,2V) or 3105 (for 4,8V). Also the lighting set for Carson trailers, item 7786. When using the lighting circuit boards (not included), the following lighting functions are possible. (suitable control required).Tail lightBrake lightReverse lightIndicator/hazard warning lightsRear fog light

Available immediately, delivery time: 1-4 days

Product number: 1905

€ 15,99 * € 19,49 * (17.96% saved)
1x LED cool white 3mm, crystal clear housing Leaded
1x LED cool white 3mm, crystal clear housing Leaded
1x LED cool white 3mm, crystal clear housing Leaded, cool white. Brightness: approx 9000mcd. Angle: 30 ° .2,8-3,8V. Max. 25mA. Standard: 20mA.

Available immediately, delivery time: 1-4 days

Product number: 8191

€ 0,68 *
1x LED yellow 3mm, yellow diffuse housing, wired
1x LED yellow 3mm, yellow diffuse housing, wired
1x LED yellow 3mm, yellow diffuse housing, wired. L-934SYD. Luminous intensity: approx. 110-250 mcd Beam angle: approx. 60°. THT mounting. Imax=30mA, U=2,0V-2,5V.

Available immediately, delivery time: 1-4 days

Product number: 6371

€ 0,25 *
LED white 3mm, clear housing, with approx. 20-25cm wires, with
LED white 3mm, clear housing, with approx. 20-25cm wires, with
1 white 3mm LED, clear housing, with approx. 20-25cm stranded wires, with series resistor. Operating voltage: 7-12V. Beam angle: 30° I=20mA. Light color: white. Housing color: clear. Size: 3mm head diameter. Operating voltage: 7,2-12V. Stranded wires: approx. 25cm with series resistor. Beam angle: approx. 30°. Current: typically approx. 20mA.

Available immediately, delivery time: 1-4 days

Product number: 12473

€ 0,95 *
1m fiber optic cable (FO cable) 0,5mm. fiber material:
1m fiber optic cable (FO cable) 0,5mm. fiber material:
1m optical fiber (fiber optic cable) 0,5mm. Fiber material: plastic (PMMA). Fiber type: step index/multimode. Outer diameter 0,5mm. Minimum bending radius: 10mm. Fiber optic cable makes it possible to bring light to places that cannot be reached with a single light source (such as a light bulb or LED). Depending on the cable thickness (outer diameter), very fine light points can be created. The color of the light point created depends exclusively on the color of the light source used (e.g. colored LED or SMD LED). This means that the finest control lights can be created in the dashboard area, for example. Supplied by the meter. If you order 3x, for example, we will deliver 3m in one piece!

Available immediately, delivery time: 1-4 days

Product number: 8891

€ 0,70 *
Details
1x SMD LED warm white (SMD type 0805) with soldered
1x SMD LED warm white (SMD type 0805) with soldered
1x SMD-LED warm white (SMD design 0805) with soldered wires. 2x1,25mm, 120° beam angle, 600mcd, very small design. LED data: 2,7V max 10mA. Thanks to the soldered cables, even model makers who are "at war" with soldering these small components can now take advantage of the benefits of these tiny things! -minimal space requirement (light surface 2x1,25mm) -very low power consumption (max. 10mA) -high luminosity -very low heating With these SMD LEDs, resistors are soldered into the supply line on the anode side (PLUS POLE) (1kOhm). This means that this LED is ready for connection to a 7,2-16V supply voltage!

Ready to ship in 5 days, delivery time 1-4 days

Product number: 6342

€ 1,70 *
Round Lens 9mm diameter, clear flat
Round Lens 9mm diameter, clear flat
Round light disc 9mm diameter, clear flat. Wedico spare part 23866. 1 piece. Height: 1,4/2,9mm. Round light disc 9mm diameter, clear flat. Wedico spare part 23866. 1 piece. Height: 1,4/2,9mm.

Available immediately, delivery time: 1-4 days

Product number: 5591

€ 1,09 *
1x LED orange 3mm, diffuse housing, wired. L-7104SED. F
1x LED orange 3mm, diffuse housing, wired. L-7104SED. F
1x LED orange 3mm, diffuse housing, wired. L-7104SED. Vaulted front. Luminous intensity: approx. 500-1100 mcd. 605nm. Beam angle: approx. 50 °. THT assembly. Imax = 20mA, U = 2,0V-2,5V.

Available immediately, delivery time: 1-4 days

Product number: 11228

€ 0,39 *
Beacon, orange, and with integrated electronics
Beacon, orange, and with integrated electronics
Rotating beacon, orange, with integrated electronics and SMD LEDs, 3mm plug-in base, square cover, scale 1/16, 4-12V 2-wire connection, approx. 35mA, 160 rpm. H=14,5mm, D=10mm. Wide voltage range 4-12V. True-to-original function. Innovative LED technology. Integrated electronics. Two-wire connection. Long service life. Easy to install. Maintenance-free. Scale optics. MS pipe 2,5x0,45mm (item 2325) is suitable for the plug-in base! Would you like to switch this rotating beacon on and off with the remote control? No problem! We recommend a simple and inexpensive memory switch - the PS4a (item 3022). This switch gives you 4 separately switchable outputs! So you can use it to switch this rotating beacon and 3 other light functions on and off!An alternative would be item 8068.

Available immediately, delivery time: 1-4 days

Product number: 4958

Ab € 35,00 *
Details
1x LED 3mm around, crystal clear housing, wired, warm-white
1x LED 3mm around, crystal clear housing, wired, warm-white
1x LED 3mm round, crystal clear housing, wired, warm white. Luminous intensity: 8000 mcd Beam angle: 30° Imax=25mA, U=2,8-3,8V at Ityp=20mA. Typical LED for the parking light function. Tiered prices: (will only be taken into account when invoicing!) From 1 piece: 0,50 euros/piece From 5 pieces: 0,40 euros/piece From 10 pieces: 0,35 euros/piece

Available immediately, delivery time: 1-4 days

Product number: 8837

Ab € 0,35 *
Details
1x LED yellow 3mm, crystal clear housing, wired, super bright
1x LED yellow 3mm, crystal clear housing, wired, super bright
1x LED yellow 3mm, crystal clear housing, wired, super bright. Luminous intensity: 2500 mcd Beam angle: 60° I=20mA, U=2,1V1x LED yellow 3mm, crystal clear housing, wired, super bright. Luminous intensity: 2500 mcd Beam angle: 60° I=20mA, U=2,1V

Available immediately, delivery time: 1-4 days

Product number: 6336

€ 0,29 *
1x LED warm white 5mm, crystal clear housing Leaded
1x LED warm white 5mm, crystal clear housing Leaded
1x LED warm white 5mm, crystal clear housing Leaded, warm white. Luminosity: 10000 mcd Viewing Angle: 20 °. For operation on 4-19V NO series resistor is necessary!

Available immediately, delivery time: 1-4 days

Product number: 6368

€ 1,25 *
5x SMD LED white (SMD design 0805) with soldered strands
5x SMD LED white (SMD design 0805) with soldered strands
5x SMD-LED white (SMD design 0805) with soldered wires. 2x1,25mm, 120° beam angle, 300mcd, very small design. With micro wires. (Pack of 5). Thanks to the soldered cables, even model makers who have trouble soldering these small components can now use the advantages of these tiny things! - Minimum space requirement (illuminated area 2x1,25mm) - Very low power consumption (max. 10mA) - High luminosity - Very little heating - Wire length approx. 18cm - Wire outer diameter approx. 0,28mm With these SMD LEDs, resistors are soldered into the supply line on the anode side (PLUS POLE) (1,5kOhm). This LED is therefore ready for connection to a 7,2-16V supply voltage! Value pack of 5 pieces!

Available immediately, delivery time: 1-4 days

Product number: 9027

€ 7,98 *
1 lens (clear) for 4-chamber rear light replacement part for
1 lens (clear) for 4-chamber rear light replacement part for
1 glass (clear) for 4-chamber rear light Spare part for article: 4725, 4726 1 piece. Approx. 12x10mm.

Available immediately, delivery time: 1-4 days

Product number: 5206

€ 1,25 *
Birnchen 6V / 50mA for beacons. Glass diameter ca
Birnchen 6V / 50mA for beacons. Glass diameter ca
6V/50mA bulb for rotating beacons. Glass diameter approx. 1,9mm, glass body approx. 6mm long. 1 piece. (222555) Spare part for items 2497,2496,1637, 1639, 95, XNUMX. Wire length approx. XNUMXmm.

Available immediately, delivery time: 1-4 days

Product number: 3817

€ 2,50 *
LED yellow 1,8mm, yellow diffused housing, wired
LED yellow 1,8mm, yellow diffused housing, wired
LED yellow 1,8mm, yellow diffuse housing, wired. Luminous intensity: 12 mcd Beam angle: 70° I=20mA, U=2,2V

Available immediately, delivery time: 1-4 days

Product number: 6333

€ 0,58 *
%
Marker lights orange, 2 piece, scale 1 / 14
Marker lights orange, 2 piece, scale 1 / 14
2x orange marker lights, suitable for 1/14 scale from 7,2-12 V. Made of plastic with glued-in SMD LED. LxWxH: 8x4x1,2mm collar: 3,2x2mm 500907382 200mm cable length. Incl. 2 resistors

Available immediately, delivery time: 1-4 days

Product number: 9906

€ 30,99 * € 34,99 * (11.43% saved)
1x LED red 1,8mm, red diffused housing, wired. Lucky
1x LED red 1,8mm, red diffused housing, wired. Lucky
1x LED red 1,8mm, red diffuse housing, wired. Lucky Light. RoHS compliant. Luminous intensity: 200-300 mcd Beam angle: 55° Imax=35mA, U=1,6-2,5V (at I=20mA). RoHS compliant. Tiered prices: (only taken into account when the invoice is processed!) From 10 pieces: 0,35 euros/piece From 25 pieces: 0,30 euros/piece Larger quantities are possible. Please enquire for price!

Available immediately, delivery time: 1-4 days

Product number: 8224

Ab € 0,30 *
Details
%
2 rectangular headlights with LED lighting for 12V
2 rectangular headlights with LED lighting for 12V
2 rectangular headlights with LED lighting for 12V. (207078). Housing made of plastic. Light disc grooved. Dimensions approx. 8,5x8,5x7mm. Total height with base approx. 14mm. Mounting base 2mm diameter 50090757 12V versionIdeal for front and rear lighting for the Carson LR634 track loader.Scope of delivery2 housings, black2 light discs, clear, grooved2 resistors with 510 Ohm are included.2 lighting boards with approx. 20cm cableInstructions

Available immediately, delivery time: 1-4 days

Product number: 7647

€ 21,99 * € 26,99 * (18.53% saved)
1x LED orange (rectangle shape 2 x 5mm) OPTOSUPPLY max.20m
1x LED orange (rectangle shape 2 x 5mm) OPTOSUPPLY max.20m
1x LED orange (design rectangle 2 x 5mm) OPTOSUPPLY max.20mA, 2,0-2,5 V. Diffuse orange housing. Ideal for side lights and front flashers. Dispersion 150 °. RoHS.

Available immediately, delivery time: 1-4 days

Product number: 11936

€ 0,43 *
1x LED red 3mm, red diffused housing Leaded
1x LED red 3mm, red diffused housing Leaded
1x LED red 3mm, red diffused housing, wired. Brightness: approx 120 mcd Viewing Angle: approximately 60 ° I = 20mA, U = 2,3V

Available immediately, delivery time: 1-4 days

Product number: 6370

€ 0,20 *
%
2 Stk. Headlight, ca.14mm diameter, total height
2 Stk. Headlight, ca.14mm diameter, total height
2 Stk. Headlight, ca.14mm diameter, total height approx 17mm (220984). (Replacement light panes: Article 4261.).

Available immediately, delivery time: 1-4 days

Product number: 1642

€ 9,29 * € 9,30 * (0.11% saved)
1 glass (red) for 4-chamber rear light spare parts for
1 glass (red) for 4-chamber rear light spare parts for
1 glass (red) for 4-chamber rear light spare parts for products: 4725, 4726, 5410 1 piece. Approximately 12x10mm.

Available immediately, delivery time: 1-4 days

Product number: 5205

€ 1,25 *
1x LED cool white 5mm, crystal clear housing Leaded
1x LED cool white 5mm, crystal clear housing Leaded
1x LED cool white 5mm, crystal clear housing Leaded, cool white, xenon. Luminosity: 10000 mcd Viewing Angle: 20 °. For operation on 4-19V NO series resistor is necessary!

Available immediately, delivery time: 1-4 days

Product number: 6369

€ 1,06 *
LED orange 1,8mm, clear transparent housing, wired.
LED orange 1,8mm, clear transparent housing, wired.
LED orange 1,8mm, clear transparent housing, wired. Brightness: 1120-1500 mcd Viewing Angle: 30 °, front arched. I = 20mA, U = 1,8-2,6V

Available immediately, delivery time: 1-4 days

Product number: 10315

€ 0,30 *
5x SMD LED orange (SMD design 0805) with soldered strands
5x SMD LED orange (SMD design 0805) with soldered strands
5x SMD LEDs orange (SMD format 0805) with soldered leads. 2x1,25mm, 120° beam angle, 300mcd, very small design. Scope of delivery: 5x SMD LEDs, 5x soldered resistors. 5x SMD LEDs orange (SMD format 0805) with soldered leads. 2x1,25mm, 120° beam angle, 300mcd, very small design. Scope of delivery: 5x SMD LEDs, 5x soldered resistors. Thanks to the soldered cables, even model builders who struggle with soldering these small components can now take advantage of the benefits of these tiny components! - Minimal space requirement (illuminating area 2x1,25mm) - Very low power consumption (max. 10mA) - High luminosity - Very low heat generation. These SMD LEDs have resistors (1kOhm) soldered into the lead on the anode side (positive pole). This makes the LED ready for connection to a 7,2-16V supply voltage.

Available immediately, delivery time: 1-4 days

Product number: 10386

€ 8,29 *
Glass (flat), red, can be used for corner lighting, 1
Glass (flat), red, can be used for corner lighting, 1
Glass (flat), red, suitable for corner lighting, 1 piece, WDC spare part no. 20306. Round lens, 9mm diameter, red. Height: 1,4/2,9mm.

Available immediately, delivery time: 1-4 days

Product number: 5689

€ 1,09 *
1x LED cool white 5mm, crystal clear housing Leaded
1x LED cool white 5mm, crystal clear housing Leaded
1x LED cold white 5mm, crystal clear housing wired, cold white. Luminous intensity: approx. 6000mcd. Beam angle: 60°. 2,8-3,4V. max. 20mA. Price-performance! Standard LED for high beam, additional headlights. Medium-wide light cone.

Available immediately, delivery time: 1-4 days

Product number: 8190

Ab € 0,55 *
Details
LED orange 3mm, clear housing, with approx. 20-25cm wires, with
LED orange 3mm, clear housing, with approx. 20-25cm wires, with
1 orange 3mm LED, clear housing, with approx. 20-25cm stranded wires, with series resistor. Operating voltage: 7-12V. Beam angle: 30° I=20mA. Light color: orange. Housing color: clear. Size: 3mm head diameter. Operating voltage: 7,2-12V. Stranded wires length: approx. 25cm with series resistor. Beam angle: approx. 30°. Current: typically approx. 20mA.

Available immediately, delivery time: 1-4 days

Product number: 12472

€ 0,95 *
Worklight variant2 7-12V for Tamiya
Worklight variant2 7-12V for Tamiya
Work light variant 2 7-12V for Tamiya models, 3-part, white LED and series resistor. 3D printing, black ABS dimensions: 8x8(12)x5,6mm.

Available immediately, delivery time: 1-4 days

Product number: 10734

€ 9,95 *
%
1 headlight 1:8, round, 25mm overall diameter, 22mm
1 headlight 1:8, round, 25mm overall diameter, 22mm
1 headlight 1:8, round, 25mm total diameter, 22mm lens. (215082). Scope of delivery:1x lamp housing, chrome-plated1x matching lens (diffuser)Hole size on the back of the housing: 2mm.

Available immediately, delivery time: 1-4 days

Product number: 6411

€ 3,08 * € 3,09 * (0.32% saved)
1x LED cool white 3mm, crystal clear housing Leaded
1x LED cool white 3mm, crystal clear housing Leaded
1x LED cold white 3mm, crystal clear housing wired, cold white. Luminous intensity: approx. 2500mcd. Beam angle: 40°. 3,5-4,0V. max. 35mA. Standard: 20mA. Front curved. Tiered prices: (Will only be taken into account when the invoice is received!) From 5 pieces: 0,80 euros/piece From 10 pieces: 0,70 euros/piece

Available immediately, delivery time: 1-4 days

Product number: 8192

Ab € 0,70 *
Details
LED reflector, plastic 5mm LED interior reflector, 6mm
LED reflector, plastic 5mm LED interior reflector, 6mm
LED reflector, plastic for 5mm LED inner reflector, 6mm high, diameter 12mm. Manufacturer: Osram

Available immediately, delivery time: 1-4 days

Product number: 1880

€ 0,74 *
%
2 rectangular headlights with LED lighting, 7,2V. Housing
2 rectangular headlights with LED lighting, 7,2V. Housing
2 rectangular headlights with LED lighting, 7,2V. Plastic housing, grooved light disc. Housing approx. 8,5x8,5x7 mm. Total height with base approx. 14mm. Mounting base 2mm diameter 50090714 7,2V versionIdeal for front and rear lighting for the Carson LR634 track loader.Scope of delivery2 housings, black2 light discs, clear, grooved2 resistors with 220 Ohm are included.2 lighting boards with approx. 20cm cableInstructions

Available immediately, delivery time: 1-4 days

Product number: 7646

€ 22,99 * € 27,99 * (17.86% saved)
1x LED red 3mm, clear case, wired.
1x LED red 3mm, clear case, wired.
1x LED red 3mm, clear case, wired. Luminous intensity: 200 mcd Beam angle: 40 ° I = 20mA, U = 2,3V

Available immediately, delivery time: 1-4 days

Product number: 6478

€ 0,38 *
1x LED cool white 5mm, crystal clear housing Leaded
1x LED cool white 5mm, crystal clear housing Leaded
1x LED cold white 5mm, crystal clear housing wired, cold white. Extremely bright! Luminous intensity: 25000 mcd Beam angle: 15°. 2,8-3,8V. max. 25mA Standard LED for high beam, additional headlights. Narrow beam. Tiered prices: (only taken into account when invoicing!) From 5 pieces: 0,72 euros/piece From 10 pieces: 0,65 euros/piece

Available immediately, delivery time: 1-4 days

Product number: 8766

Ab € 0,65 *
Details
Trailer electronics AMO, with infrared receiver, 7,2V-12V
Trailer electronics AMO, with infrared receiver, 7,2V-12V
Trailer electronics AMO with infrared receiver, 7,2V-12V, controls 6 outputs, driving light, brake light, indicator light and tail light plus a special function, 700mA per output - short-circuit proof. One servo output for switching functions (2 in conjunction with K15/30/60) two servo outputs proportional (in conjunction with AIR4 and AIR7/AIRU), integrated BEC for servos 5V/1A, suitable for all Servonaut systems and with the AIR7/AIRU also for most systems from other manufacturers. Dimensions approx. 70x30x12mm. Instructions are available for downloading this article. Downloading is free! (except your online costs).Trailer electronics with IR receiverSuitable for all Servonaut systems and with AIRU module also for most systems from other manufacturersControls 5 to 6 outputs e.g. driving light, brake light, indicator light and tail light and a special functionAlso suitable for road train applications.All outputs 700 mA short-circuit proofOne servo output for switching functions (two in conjunction with K15/30/40/60), two servo outputs proportional (in conjunction with AIR4 and AIR4/AIRU)Integrated BEC for servo 5V/1ASupply voltage: 7,2 to 12 VCurrent consumption: 20 mA (quiescent)Switching function: 5-6Switching voltage: same as supply voltageServo outputs: 3-4Protection function: short circuit, overloadDimensions: approx. 70 x 30 x 12 mmScope of delivery: Module with IR receiver and 3-stage switchIR transmitter AIR4, AIRU or LA10 are NOT included in delivery. Please order separately.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 5086

€ 95,20 *
%
4-chamber taillight unit (1 pair) without bracket
4-chamber taillight unit (1 pair) without bracket
4-chamber rear light unit (1 pair) without holder, 32x9x11mm (LxHxD) (220982). The holes for the lighting units have a diameter of approx. 2,8mm. To use standard 3mm LEDs, these may need to be drilled out a little. Replacement light lenses are available under the item numbers: 6459 (red) 6460 (orange) 6461 (clear) Complete LED boards for installation are also available under item numbers 8347/8348! Now available again from stock!

Available immediately, delivery time: 1-4 days

Product number: 2626

€ 12,90 * € 13,20 * (2.27% saved)
Contour light, white, Hella, M 1/14. 8,5 x 4mm
Contour light, white, Hella, M 1/14. 8,5 x 4mm
Contour light, white, Hella, M 1/14. 8,5 x 4mm. Lens and base body are glued together. Suitable for fitting with individual SMDs. We recommend individual SMDs in the color WHITE, article 9027 or 6340, for lighting. Alternatively, the warm white LEDs 9204 or 6342 can also be used.

No longer available

Product number: 12343

€ 2,99 *
Details
Boards for 7-chamber rear lights 12V. 1 pair (1x left,
Boards for 7-chamber rear lights 12V. 1 pair (1x left,
Circuit boards for 7-chamber rear lights 12V. 1 pair (1x left, 1x right), trailer, equipped with SMD LEDs, common plus pole, 5 light functions, RED identifier. Necessary resistors are integrated! Matching article 1905 - 7-chamber rear light. The insulated individual connection wires are color-coded: Wire length approx. 18cm. Red = common plus pole White = rear light Black = brake light Gray = right indicator Yellow = left indicator Green = reversing light Blue = rear fog light When using these lighting circuit boards, the following light functions are possible.

Available immediately, delivery time: 1-4 days

Product number: 3103

€ 36,20 *
LED orange 1,8mm, clear housing, with approx. 20-25cm wires
LED orange 1,8mm, clear housing, with approx. 20-25cm wires
1 orange LED 1,8mm, clear housing, with approx. 20-25cm stranded wires, with series resistor. Operating voltage: 7-12V. Beam angle: 30° I=20mA. Light color: orange. Housing color: clear. Size: 1,8mm head diameter. Operating voltage: 7,2-12V. Stranded wires length: approx. 25cm with series resistor. Beam angle: approx. 30°. Current: typically approx. 20mA.

Available immediately, delivery time: 1-4 days

Product number: 12468

€ 0,95 *
1 glass (orange) for 4-chamber rear light spare parts for
1 glass (orange) for 4-chamber rear light spare parts for
1 glass (orange) for 4-chamber rear light spare parts for products: 4725, 4726 1 piece. Approximately 12x10mm.

Available immediately, delivery time: 1-4 days

Product number: 5204

€ 1,25 *
1 cap, clear from Makrolen, 12x2mm match the
1 cap, clear from Makrolen, 12x2mm match the
1 cap, clear from Makrolen, 12x2mm suitable to the items 1879 1880 and.

Available immediately, delivery time: 1-4 days

Product number: 7202

€ 0,42 *