EasyBus lighting boards for 7-chamber rear lights from Carson/Veroma. Suitable for the EasyBus system. The plug & play solution. The modules are each equipped with seven SMD LEDs and have an output with a series resistor on the back for free assignment (for example, for a marker light or license plate light). They are connected to the Easybus outputs of the light assistants. Simply plug in... Done! Each of the eight outputs can be changed as usual with the Kraftwerk ControlPanel and thus adapted to your own ideas. Attention: Since we use larger and brighter LEDs, the back panel of the lamp body must be removed. Unfortunately, this also eliminates the holes for the fastening screws, which is why the lamp bodies must be glued to the model.
Holland taillights EasyBus EasyBus variant Holland taillights. They consist of three taillight - brake light - indicator combinations and a reversing light or rear fog light and are equipped with twenty LEDs! The taillights measure 50mm in width (dimensions: 50x13mm) and therefore fit on the fenders of the Tamiya models. Caution: When using on a semi-trailer/trailer, the mounting holes in the bumper may have to be moved.
1x EasyBus lighting board for Tamiya MAN 18.540 and TGX 26.540 rear. Suitable for the EasyBus system. The plug & play solution. Scope of delivery:1x lighting board for Tamiya MANs, rear, left1x lighting board for Tamiya MANs, rear, rightPlug & PlayPerfect fit for the rear lights of the Tamiya MANs.With 3-pin plug connection. Integrated series resistors.Connection wires each approx. 60cm long.Power supply comes from the receiver output.The following functions can be controlled with the LIGHT ASSISTANT main module:-Parking light/tail light-Brake light-Reverse light-American tail light-Indicator left/right-Hazard warning light-American indicator-Rear fog light
1x EasyBus lighting board for Tamiya MAN 18.540 and TGX 26.540, front. Suitable for the EasyBus system. The plug & play solution. Lighting boards for TAMIYA-MANs!Scope of delivery:1x lighting board for Tamiya MANs, left1x lighting board for Tamiya MANs, rightPlug & PlayPerfect fit for the front of the Tamiya MANs.With 3-pin plug connection. Integrated series resistors.With 3 individually usable additional outputs.Connection wires each approx. 30cm long.Power supply comes from the receiver output.The following functions can be controlled with the LIGHT ASSISTANT main module:-Parking light-Low beam-High beam-Fog light-Flash light-Left/right indicator-Hazard warning light-Xenon effect-Daytime running light-Corner light/cornering light
1x EasyBus lighting board for Tamiya ACTROS 1851 GigaSpace, rear. Suitable for the EasyBus system. The plug & play solution. Lighting boards for TAMIYA ACTROS1851!Scope of delivery:1x lighting board for Tamiya ACTROS, rear, left1x lighting board for Tamiya ACTROS, rear, rightPlug & PlayPerfect fit for the rear lights of the Tamiya ACTROS.With 3-pin plug connection. Integrated series resistors.Connection wires each approx. 60cm long.Power supply comes from the receiver output.These functions can be controlled with the LIGHT ASSISTANT main module:-Parking light/tail light-Brake light-Reversing light-American tail light-Indicator left/right-Hazard warning light-American indicator-Rear fog light
1x EasyBus lighting board for Tamiya Mercedes 1838 and 1850L. Suitable for the EasyBus system. The plug & play solution. 2 ready-to-install boards and 2 light chamber dividers.
1x EasyBus lighting board for Tamiya MB ACTROS 1851 GigaSpace, front. Suitable for the EasyBus system. The plug & play solution. Lighting board for TAMIYA MB ACTROS 1851 GigaSpace! Scope of delivery:1x lighting board for Tamiya ACTROS, left1x lighting board for Tamiya ACTROS, rightPlug & PlayPerfect fit for the front of the Tamiya ACTROS.With 3-pin plug connection. Integrated series resistors.With 3 individually usable additional outputs.Connection wires each approx. 30cm long.Power supply comes from the receiver output.The following functions can be controlled with the LIGHT ASSISTANT main module:-Parking light-Low beam-High beam-Fog light-Flash light-Left/right indicator-Hazard warning light-Xenon effect-Daytime running light-Corner light/cornering light
EasyBus lighting system KLM 4/16 for Tamiya Mercedes-Benz Actros 3363 The lighting system for the TAMIYA Actros 3363 with the new KLM 4/16, ready-to-install lighting boards and integrated infrared transmitter.The lighting boards are simply inserted into the light chambers from behind and are held in place by a press fit.The system is controlled by a KLM 4/16, which is compatible with normal forward-reverse speed controllers (with or without separate brake), cruise control controllers and all sound modules.The lighting functions can be controlled either with our control pad or in numerous other ways, for details please refer to the online manual.This starter set includes a complete lighting system for the Mercedes-Benz Actros 3363 from TAMIYA and consists of two front lighting boards with wired LEDs for the side indicators, underrun protection and marker lights, as well as a light assistant KLM 4/16.br>The lighting boards are connected directly to the KLM 4/16 and can also be configured with our Kraftwerk ControlPanel. Brightness, flashing speeds, but also the basic functionality (eg: should the high beam be switched on at the output) can be set separately for each output. Information about this can be foundHighlights & DetailsKLM 4/16 (4 servo inputs, 16 switching outputs, 5 bus outputs) Ready-to-install lighting boardsPlug & Play solution (connect and drive)Compatible with all sound modulesCompatible with all speed controllersCompatible with Tamiya MFUExpandable with a wide variety of lighting boardsExpandable with infrared for trailer lightingCan be adapted to the model down to the smallest detail using a PCNo programming knowledge requiredPC software can be downloaded free of chargeTechnical dataPower supply:via receiver power supply (BEC of the speed controller)Max. power consumption 20mA per device and 20 mA per LEDLEDs at the front (per side):