Go to home page
€ 0,00 *


Drives

Filter
1x GM32U390, 7,2V planetary gear motor 390U / min. With
1x GM32U390, 7,2V planetary gear motor 390U / min. With
1x GM32U390, 7,2V planetary gear motor 390rpm. With quiet, robust planetary gear. As a drive motor for models with underfloor drive. 6mm shaft output. Successor to GM32U370 with approx. 50% more power!Motor data:Voltage: 7,2VPoles: 5Interference suppression: yesIdle speed: 6000 rpmIdle current: 250 mANominal speed: 5000 rpmNominal current: 1,6 ANominal torque: 2,5 NcmNominal power: 14,0 WBlocking current: 10 ABlocking torque: 18 NcmData for motor with gearbox:Reduction ratio: 14:1Diameter: 37mmLength: 85,6 mmWeight: 362 grShaft diameter: 6mmIdle speed: 470 rpmNominal speed: 390 rpmNominal torque: 34,6 NcmThe motor mounts 6242, 7424, 7658, 7379, 7380, 12298.

Available immediately, delivery time: 1-4 days

Product number: 9261

€ 89,50 *
1 motor suppressor consisting of capacitors and 3
1 motor suppressor consisting of capacitors and 3
1 motor suppressor consisting of 3 capacitors and application instructions. 2x 10nF, 1x 22nF capacitor.

Available immediately, delivery time: 1-4 days

Product number: 7541

€ 2,59 *
1x Motorhalter engines Pairing GM32-gear
1x Motorhalter engines Pairing GM32-gear
1x motor bracket Suitable motors to GM32-gear. Universal bracket with bolts and nuts. Width 61,5mm to match Tamiya frame.

Available immediately, delivery time: 1-4 days

Product number: 6242

€ 10,59 *
1 UAT1 holder for underfloor drive. Motor holder
1 UAT1 holder for underfloor drive. Motor holder
1 UAT1 holder for underfloor drive. Motor holder for Tamiya models with cardan shaft length > 100mm. For GM32 motors. The sheet thickness is: 2mm. This holder and a GM32 gear motor create a quiet, space-saving and almost backlash-free underfloor drive for Tamiya models. Replaces the standard three-speed gearbox. Very easy to install thanks to the special motor holder and driver. The driving speed with the GM32U360 or GM32U390 motors corresponds to the TM72 or TruckPuller2 in 1st gear. There is enough space for the correct arrangement of the tie rod. Set of motor holder and cardan driver. Dimensions: 69x62x40mm Suitable for Tamiya tractors with a long wheelbase, such as 2-axle vehicles with a European driver's cab and US three-axle vehicles with a long hood.

Available immediately, delivery time: 1-4 days

Product number: 7379

€ 25,60 *
%
1 engine f. Tilting drive (spindle motor) 6V (3-9V) 300U / min
1 engine f. Tilting drive (spindle motor) 6V (3-9V) 300U / min
1 motor for tilt drive (spindle motor) 6V (3-9V) 300rpm. Idle 500mA. Current max. 2A. Reduction ratio 50:1. 125 gr. (shipping weight 155gr.). 907066. Diameter 27,5mm/33mm (motor/gearbox). Shaft diameter 5mm flattened to 4mm. Shaft 12mm long.Motor length: 38/44mm (without/with connections)Gearbox length: 20mm.Recommended motor for the tilt spindle item 4099!Suitable as a drive for the mast double spindle of the crawler loader LR634, Carson, item 7575.You can find a suitable universal motor mount for this gear motor under item number 10697.Technical specifications:Nominal voltage: 6V DCWorking voltage: 3-9V DCIdle speed: 300rpmIdle current: 500mASpeed ​​in continuous operation: 270rpmContinuous current: 2AContinuous torque: 200mNmPeak torque: 600mNmReduction ratio: 50:1Weight: 125gr.

Available immediately, delivery time: 1-4 days

Product number: 4218

€ 52,90 * € 55,99 * (5.52% saved)
%
1x Truck Engine 7,2Volt, 6500 U / min, Poison Truck Engine
1x Truck Engine 7,2Volt, 6500 U / min, Poison Truck Engine
1x Truck Engine 7,2Volt, 6500 U / min, Poison truck engine (206023). 68mm LOA, 35mm diameter. Motor shaft 3,17x10mm. Weight 180gr. Filtered with cables and connectors.

Available immediately, delivery time: 1-4 days

Product number: 6617

€ 12,65 * € 13,49 * (6.23% saved)
RB35Plus67,12V gear motor 67 rpm. Alternative to
RB35Plus67,12V gear motor 67 rpm. Alternative to
1x RB35Plus67,12VGeared motor 67rpm. Alternative to the RB35 standard but with approx. 30% more power. Motor data:Voltage: 12VPoles: 3Interference suppressed: internally pre-suppressedIdle speed: 6200 rpmIdle current: 120 mANominal speed: 5100 rpmNominal current: 470 mANominal torque: 0,6 NcmNominal power: 3,1 WShort-term max. load speed: 3100 rpmShort-term max. load current: 1000 mAShort-term max. load torque: 1,7 NcmShort-term max. load power: 5,2 WBlocking current: 2 ABlocking torque: 3,4 NcmData for motor with gearbox:Reduction ratio: 75:1Diameter: 37mmLength: 53,5 mmWeight: 175 gShaft diameter: 6mmIdle speed: 82 rpmNominal speed: 67 rpm.Nominal torque: 29 NcmShort-term max. load speed: 50 rpm.Short-term max. load torque: (132 Ncm)Max. torque: 90 Ncm

Available immediately, delivery time: 1-4 days

Product number: 7546

€ 28,30 *
GM32U450, 12V planetary gear motor 450U / min. With a low,
GM32U450, 12V planetary gear motor 450U / min. With a low,
GM32U450, 12V planetary gear motor 450 rpm. With quiet, robust planetary gear. As a drive motor for models in WDC/TAM scale with 3:1 or 4:1 axle reduction. Motor data:Voltage: 12VPoles: 5Interference suppression: yesIdle speed: 10000 rpmIdle current: 800 mANominal speed: 8700 rpmNominal current: 4,7 ANominal torque: 4,2 NcmNominal power: 38,0 WShort-term max. load speed: 5000 rpmShort-term max. load current: 15 AShort-term max. load torque: 16,5 NcmShort-term max. load power: 88 WBlocking current: 30 ABlocking torque: 33 NcmData for motor with gearbox:Reduction ratio: 19:1Diameter: 37mmLength: 88,8 mmWeight: 362 gShaft diameter: 6mmIdle speed: 520 rpmNominal speed: 450 rpm.Nominal torque: 54,9 NcmShort-term max. load speed: 260 rpm.Short-term max. load torque: 215 NcmMax. torque: 118 Ncm

Available immediately, delivery time: 1-4 days

Product number: 7109

€ 82,10 *
%
1 TruckPuller3 electric motor 12V Rated voltage. 62W, 6300U / min,
1 TruckPuller3 electric motor 12V Rated voltage. 62W, 6300U / min,
1 TruckPuller3 electric motor 12V nominal voltage 62W, 6300rpm, 3,7-14,4V, 2 ball bearings, motor shaft 3,2mm. 1 TruckPuller3 electric motor 12V nominal voltage 62W, 6300rpm, 3,7-14,4V, 2 ball bearings, motor shaft 3,2mm. -adjustable timing-can be removed-clockwise/anticlockwise rotation-2 ball bearings-540 size-with aluminum heat sink-with SMD interference suppression boardavailable again!

Available immediately, delivery time: 1-4 days

Product number: 6505

€ 30,90 * € 31,90 * (3.13% saved)
RB35Plus51,12V gear motor 51 rpm. Alternative to
RB35Plus51,12V gear motor 51 rpm. Alternative to
RB35Plus51,12V gear motor 51 rpm. Alternative to the RB35 standard but with approx. 30% more power. Motor data:Voltage: 12VPoles: 3Interference suppression: noIdle speed: 6200 rpmIdle current: 120 mANominal speed: 5100 rpmNominal current: 470 mANominal torque: 0,6 NcmNominal power: 3,1 WShort-term max. load speed: 3100 rpmShort-term max. load current: 1000 mAShort-term max. load torque: 1,7 NcmShort-term max. load power: 5,2 WBlocking current: 2 ABlocking torque: 3,4 NcmData for motor with gearbox:Reduction ratio: 100:1Diameter: 37mmLength: 53,5 mmWeight: 175 gShaft diameter: 6mmIdle speed: 62 rpmNominal speed: 51 rpm.Nominal torque: 40 NcmShort-term max. load speed: 31 rpm.Short-term max. load torque: (112 Ncm)Max. torque: 90 Ncm

Available immediately, delivery time: 1-4 days

Product number: 6184

€ 25,14 *
%
1 TruckPuller3 electric motor 7,2V nominal voltage 48W, 6600rpm
1 TruckPuller3 electric motor 7,2V nominal voltage 48W, 6600rpm
1 TruckPuller3 electric motor 7,2V nominal voltage 48W, 6600rpm, 3,7-9,6V, 2 ball bearings, motor shaft 3,2mm. 1 TruckPuller3 electric motor 7,2V nominal voltage 48W, 6600rpm, 3,7-9,6V, 2 ball bearings, motor shaft 3,2mm. -adjustable timing-can be removed-clockwise/anticlockwise rotation-2 ball bearings-540 size-with aluminum heat sink-with SMD interference suppression boardavailable again!

Available immediately, delivery time: 1-4 days

Product number: 6434

€ 30,90 * € 31,99 * (3.41% saved)
1 UAT2 holder for underfloor drive. Motor holder
1 UAT2 holder for underfloor drive. Motor holder
1 UAT2 holder for underfloor drive. Motor holder for Tamiya models with cardan shaft length up to 100mm. For GM32 motors. The sheet thickness is: 2mm. This holder and a GM32 gear motor create a quiet, space-saving and almost backlash-free underfloor drive for Tamiya models. Replaces the standard three-speed gearbox. Very easy installation thanks to the special motor mount and driver. The motor is lower. The driving speed with the GM32U360 or GM32U370 motors corresponds to the TM72 or TruckPuller2 in 1st gear. There is enough space for the correct arrangement of the tie rod. Set of motor mount and cardan driver. For tractors with a short front end (e.g. European 3-axle vehicles), the mount must be slightly raised so that the motor does not rest on the front axle. Suitable for all Tamiya tractors with a short wheelbase - the motor is slightly lower between the frame longitudinal members. (3-axle vehicles). Dimensions: 69x62x50mm

Available immediately, delivery time: 1-4 days

Product number: 7380

€ 25,69 *
1 carrier for Tamiya cardan shaft, bore 6mm. Fitting
1 carrier for Tamiya cardan shaft, bore 6mm. Fitting
1 carrier for Tamiya-propeller shaft bore 6mm. Suitable for almost all GM32- gearmotors. With indoor 6kant- screw. Also suitable for RB35xx- gearmotors.

Available immediately, delivery time: 1-4 days

Product number: 8074

€ 6,95 *
RB35Power80,12V gear motor 80 U / min. Alternative to
RB35Power80,12V gear motor 80 U / min. Alternative to
RB35Power80,12V gear motor 80 rpm. Alternative to the RB35 standard but with approx. 3 times the power. Motor data:Voltage: 12VPoles: 5Interference suppression: 2x CLidling speed: 7300 rpmIdle current: 150 mANominal speed: 6000 rpmNominal current: 900 mANominal torque: 1,1 NcmNominal power: 7 WShort-term max. load speed: 3650 rpmShort-term max. load current: 2800 mAShort-term max. load torque: 4,25 NcmShort-term max. load power: 15,0 WBlocking current: 5,5 ABlocking torque: 8,5 NcmData for motor with gearbox:Reduction ratio: 75:1Diameter: 37mmLength: 71,1 mmWeight: 211 gShaft diameter: 6mmIdle speed: 97 rpmNominal speed: 80 rpm.Nominal torque: 54 NcmShort-term max. load speed: 49 rpm.Short-term max. load torque: (210 Ncm)Max. torque: 120 Ncm

Available immediately, delivery time: 1-4 days

Product number: 6186

€ 41,29 *
1x TM72, Truck Engine 7,2V with soft start. 6000 U / min
1x TM72, Truck Engine 7,2V with soft start. 6000 U / min
1x TM72, truck motor 7,2V with soft start. 6000 rpm when idling. Very similar to the TruckPuller 7,2V. Identical mounting diagram. Motor data:Voltage: 7,2VPoles: 5Interference suppression: 3x CLidling speed: 6000 rpmIdle current: 720 mANominal speed: 5200 rpmNominal current: 2,86 ANominal torque: 2,65 NcmNominal power: 14,0 WShort-term max. load speed: 3000 rpmShort-term max. load current: 9500 mAShort-term max. load torque: 10,5 NcmShort-term max. load power: 32 WBlocking current: 19 ABlocking torque: 21 NcmDiameter: 37mmLength: 57 mmShaft length: 75mmWeight: 218 gShaft diameter: 3,17mm

Available immediately, delivery time: 1-4 days

Product number: 6238

€ 26,60 *
1x Engine mount, suitable for geared motor Article 4218 and 75
1x Engine mount, suitable for geared motor Article 4218 and 75
1x motor bracket, suitable for gear motor items 4218 and 7577. Universal bracket with screws for fastening the motor. Suitable for vehicle frames with a width of 60mm. Motor bracket, bracket made of 2mm stainless steel. Suitable for gear motors with item numbers 4218, 7577. Suitable for fastening to vehicle frames with a width of approx. 60mm. The bracket allows 2 different installation situations for the motor. Either the output shaft is downwards or upwards.

Available immediately, delivery time: 1-4 days

Product number: 10697

€ 9,75 *
Servonaut geared motor RB35Power120
Servonaut geared motor RB35Power120
RB35Power120,12V gear motor 120 U / min. Alternative to RB35 standard but with about 3-fold power.

Available immediately, delivery time: 1-4 days

Product number: 11215

€ 41,29 *
1x DC miniature motor 6V 2224U006SR from Faulhaber. Nominal voltage
1x DC miniature motor 6V 2224U006SR from Faulhaber. Nominal voltage
1x DC small motor 6V 2224U006SR from Faulhaber. Nominal voltage 6V, output power approx. 4,55W. Idle speed approx. 8200 rpm. Sintered bearing. Shaft 2mm. Housing material: steel, black coatedWeight: 46g.Clockwise rotation, seen on output shaftDiameter: 22mmHousing length: 24,2mmShaft length: 6mmEfficiency: 82%Mounting hole circle: 12mm with 3x M2 threadAvailable from stock!This motor is often used as a drive motor in the Linde forklift truck from robbe.
1

End of life - article no longer available!

Product number: 8414

€ 72,35 *
Details
1x RB35Mega70, 7,2V geared motor. For quiet
1x RB35Mega70, 7,2V geared motor. For quiet
1x RB35Mega70, 7,2V gear motor. For quiet spindle drives up to 70 rpm. Nominal power 4,6W. Motor data:Voltage: 7,2VData for motor with gearbox:Reduction ratio: 75:1Diameter: 37mmLength: 83,0 mmWeight: 240 gShaft diameter: 6mmIdle speed: 77 rpmNominal speed: 70 rpmNominal power 4,6W, briefly 6W.

Available immediately, delivery time: 1-4 days

Product number: 9311

€ 37,79 *
Motorhalter engines Pairing RB35-gear
Motorhalter engines Pairing RB35-gear
Motor bracket Suitable motors to RB35-gear. Universal bracket with bolts and nuts. Width 61,5mm to match Tamiya frame.

Available immediately, delivery time: 1-4 days

Product number: 6239

€ 10,59 *
1 carrier for Tamiya cardan shaft, bore 5mm. Fitting
1 carrier for Tamiya cardan shaft, bore 5mm. Fitting
1 carrier for Tamiya-propeller shaft bore 5mm. Suitable for Tamiya original transmission and -Achsen.Mit indoor 6kant- screw. Also suitable for VTG390 and VTG450 transfer case.

Available immediately, delivery time: 1-4 days

Product number: 8075

€ 5,44 *
1x GM32U360, 12V planetary gear motor 360rpm. With
1x GM32U360, 12V planetary gear motor 360rpm. With
1x GM32U360, 12V planetary gear motor 360 rpm. With quiet, robust planetary gear. As a drive motor for models in WDC/TAM scale with 2:1 axle reduction. Motor data:Voltage: 12VPoles: 5Interference suppression: noIdle speed: 6000 rpmIdle current: 250 mANominal speed: 5000 rpmNominal current: 1,6 ANominal torque: 2,5 NcmNominal power: 13,0 WShort-term max. load speed: 3000 rpmShort-term max. load current: 5000 mAShort-term max. load torque: 9,0 NcmShort-term max. load power: 27 WBlocking current: 10 ABlocking torque: 18 NcmData for motor with gearbox:Reduction ratio: 14:1Diameter: 37mmLength: 85,6 mmWeight: 362 gShaft diameter: 6mmIdle speed: 428 rpmNominal speed: 357 rpm.Nominal torque: 25 NcmShort-term max. load speed: 214 rpm.Short-term max. load torque: 88 NcmMax. torque: 120 Ncm

Available immediately, delivery time: 1-4 days

Product number: 6182

€ 69,50 *
GM22U130,12V planetary gear motor 130U / min. With a low,
GM22U130,12V planetary gear motor 130U / min. With a low,
1x GM22U130,12, 130V planetary gear motor 12 rpm. With quiet, robust planetary gear. For actuators, ramps, servos, rotary drives, etc. Motor data: Voltage: 3V Poles: 150 Interference suppression: no, interference suppression material is included Idle speed: 130 rpm Nominal speed: 6,8 rpm Nominal torque: 1,5 Ncm Nominal power: 2,9 W Short-term max. load power: 22 W Data for motor with gear: Diameter: 58 mm Length: 71 mm Weight: 4 g Shaft diameter: 6241 mm The matching motor mount can be found under article XNUMX (not included!)

Available immediately, delivery time: 1-4 days

Product number: 7543

€ 33,80 *
TM120, Truck Engine 12V in with soft start 5000 U / min
TM120, Truck Engine 12V in with soft start 5000 U / min
TM120, truck motor 12V with soft start 5000 rpm at idle. Very similar to the TruckPuller 12V. Identical mounting diagram. Motor data:Voltage: 12VPoles: 5Interference suppression: no, 3x capacitors includedIdle speed: 5000 rpmDiameter: 37mmLength: 57 mmLength of the shaft stub: 5mmWeight: 245 grShaft diameter: 3,17mm

Available immediately, delivery time: 1-4 days

Product number: 7901

€ 15,40 *
RB35Pro69,12V gear motor 69 rpm. Alternative to
RB35Pro69,12V gear motor 69 rpm. Alternative to
RB35Pro69,12V gear motor 69 rpm. Alternative to the RB35 standard but with approx. 100% more power. Motor data:Voltage: 12VPoles: 3Interference suppression: 4x CLidling speed: 6000 rpmIdle current: 70 mANominal speed: 5200 rpmNominal current: 460 mANominal torque: 0,62 NcmNominal power: 3,3 WShort-term max. load speed: 3000 rpmShort-term max. load current: 1500 mAShort-term max. load torque: 2,25 NcmShort-term max. load power: 7,0 WBlocking current: 3 ABlocking torque: 4,5 NcmData for motor with gearbox:Reduction ratio: 75:1Diameter: 37mmLength: 64,5 mmWeight: 240 grShaft diameter: 6mmIdle speed: 80 rpmNominal speed: 69 rpm.Nominal torque: 31 NcmShort-term max. load speed: 40 rpm.Short-term max. load torque: 111 NcmMax. torque: 120 Ncm

Available immediately, delivery time: 1-4 days

Product number: 6185

€ 36,70 *
%
1x drive gear motor for the crawler loader LR634, Carson. For
1x drive gear motor for the crawler loader LR634, Carson. For
1x drive gear motor for the Carson LR634 crawler loader. 2 of these motors are required for operation! 1x drive gear motor for the Carson LR634 crawler loader. 2 of these motors are required for operation! Rated voltage: 6V Working voltage: 3-9V Idle speed: 114 rpm Idle current: 600mA Continuous speed: 105 rpm Continuous current 1,8A Continuous torque: 300mNm Peak torque: 900mNm Reduction ratio 125:1 Weight: 130g Total length without shaft: 69mm Overall length: 78mm Gearbox diameter: 33mm Motor diameter: 27,5mm Shaft diameter: 5mm with half-side flattening Shaft length: 9,5mm Mounting hole pattern: 3 M3 threads each 120° on a 27mm bolt circle These are the drive motors for the Carson crawler loader LR634. For general applications, a suitable motor mount is available under item number 10697.

Available immediately, delivery time: 1-4 days

Product number: 7577

€ 47,41 * € 52,49 * (9.68% saved)
1 underfloor engine compact holder for all
1 underfloor engine compact holder for all
1 underfloor motor compact holder, suitable for all Tamiya tractors. Aluminium sheet 1,5mm. Designed for the GM32Uxxx gear motors from Servonaut. Data:Length 147mmWidth 59mmHeight 40mmThe holder can accommodate a loudspeaker (e.g. item 7028), a gear motor and a servo. In addition, holes are already provided for cables to control the fifth wheel plate or for lockable axles.The holder is screwed onto the frame longitudinal members with screws (not included).

Available immediately, delivery time: 1-4 days

Product number: 7424

€ 19,50 *
%
Truck engine 7,2 volts, 6500 rpm, Venom truck engine
Truck engine 7,2 volts, 6500 rpm, Venom truck engine
Truck motor 7,2 volts, 6500 rpm, Venom truck motor (906043). 68mm length overall, 35mm diameter. Motor shaft 3,17x10mm. Weight 180g. Noise suppressed, with cables and plug.

Available immediately, delivery time: 1-4 days

Product number: 7447

€ 26,99 * € 31,49 * (14.29% saved)
GM32U430, 12V planetary gear motor 430U / min. With a low,
GM32U430, 12V planetary gear motor 430U / min. With a low,
GM32U430, 12V planetary gear motor 430 rpm. With quiet, robust planetary gear. As a drive motor for smaller models. Motor data:Voltage: 12VPoles: 5Interference suppression: 2x CLidling speed: 7300 rpmIdle current: 150 mANominal speed: 6000 rpmNominal current: 900mANominal torque: 1,1 NcmNominal power: 7,0 WShort-term max. load speed: 3650 rpmShort-term max. load current: 2800 mAShort-term max. load torque: 4,25 NcmShort-term max. load power: 15 WBlocking current: 5,5 ABlocking torque: 8,5 NcmData for motor with gearbox:Reduction ratio: 14:1Diameter: 32mmLength: 73,6 mmWeight: 231 gShaft diameter: 6mmIdle speed: 521 rpmNominal speed: 429 rpm.Nominal torque: 11 NcmShort-term max. load speed: 261 rpm.Short-term max. load torque: 42 NcmMax. torque: 120 Ncm

Available immediately, delivery time: 1-4 days

Product number: 6181

€ 49,99 *
RB35Plus34,12V gear motor 34 rpm. Alternative to
RB35Plus34,12V gear motor 34 rpm. Alternative to
RB35Plus34,12V gear motor 34 rpm. Alternative to the RB35 standard but with approx. 30% more power. Motor data:Voltage: 12VPoles: 3Interference suppression: internally pre-suppressedIdle speed: 6200 rpmIdle current: 120 mANominal speed: 5100 rpmNominal current: 470 mANominal torque: 0,6 NcmNominal power: 3,1 WShort-term max. load speed: 3100 rpmShort-term max. load current: 1000 mAShort-term max. load torque: 1,7 NcmShort-term max. load power: 5,2 WBlocking current: 2 ABlocking torque: 3,4 NcmData for motor with gearbox:Reduction ratio: 150:1Diameter: 37mmLength: 53,5 mmWeight: 175 gShaft diameter: 6mmIdle speed: 41 rpmNominal speed: 34 rpm.Nominal torque: 53 NcmShort-term max. load speed: 24 rpm.Short-term max. load torque: (132 Ncm)Max. torque: 90 Ncm

Available immediately, delivery time: 1-4 days

Product number: 7545

€ 28,30 *
GM22U65,12V planetary gear motor 65U / min. With a low,
GM22U65,12V planetary gear motor 65U / min. With a low,
GM22U65,12V planetary gear motor 65 rpm. With quiet, robust planetary gear. For actuators, ramps, servos, rotary drives, etc. Motor data:Voltage: 12VPoles: 3Interference suppression: Interference suppression kit is included!Idle speed: 8000 rpmIdle current: 50 mANominal speed: 6700 rpmNominal current: 200mANominal torque: 0,22 NcmNominal power: 1,5 WShort-term max. load speed: 4000 rpmShort-term max. load current: 500mAShort-term max. load torque: 0,65 NcmShort-term max. load power: 2,9 WBlocking current: 1 ABlocking torque: 1,3 NcmData for motor with gearbox:Reduction ratio: 455:1Diameter: 22mmLength: 55,8mmWeight: 71grShaft diameter: 4mmIdle speed: 76 rpm.Nominal speed: 65 rpm.Nominal torque: 13,7 NcmShort-term max. load speed: 9 rpm.Short-term max. load torque: (207 Ncm)Max. torque: 15 NcmYou can find the matching motor mount as article 6241 (not included!)

Available immediately, delivery time: 1-4 days

Product number: 7542

€ 33,80 *
%
Wedico Bühler motor 12V (13.055) (115). Diameter 35mm
Wedico Bühler motor 12V (13.055) (115). Diameter 35mm
Wedico Bühler Motor 12V (13.055) (115). Diameter 35mm, length 65mm without shaft, shaft 4mm (12,5mm external), speed 2.900 rpm, without load 0,4A white plastic gear, 14 teeth.Collar diameter on the motor: 17,8mm, height 2,5mm - both sides.Max. current: 6ATorque: 9,2NcmOne side with ball bearings, other side with dome bearings.Basic interference suppression by 2 chokes.Protection class: IP40.Carbon brushes, 8-part collector.Max. output power approx. 16W.Dimensions of the previous version: (no longer available)Length 71mm without shaftDiameter 40mm

Ready to ship in 5 days, delivery time 1-4 days

Product number: 4322

€ 54,95 * € 67,10 * (18.11% saved)
GM22U350,12V planetary gear motor 350U / min. With a low,
GM22U350,12V planetary gear motor 350U / min. With a low,
GM22U350,12, 350V planetary gear motor 12 rpm. With quiet, robust planetary gear. For actuators, ramps, servos, rotary drives, etc. Motor data: Voltage: 3V Poles: 421 Interference suppression: no, interference suppression material is included Idle speed: 350 rpm Nominal speed: 2,9 rpm Nominal torque: 1,5 Ncm Nominal power: 2,9 W Short-term max. load power: 22 W Data for motor with gear: Diameter: 51 mm Length: 70 mm Weight: 4 g Shaft diameter: 6241 mm The matching motor mount can be found under article XNUMX (not included!)

Available immediately, delivery time: 1-4 days

Product number: 7544

€ 33,80 *
1x small motor DC 2-6V DC for easy
1x small motor DC 2-6V DC for easy
1x small motor DC 2-6V direct current for simple applications. Weight 20g. Shaft diameter 2mm. Technical data:at 1,5V:idle 4900 rpm 0,14Aload 3375 rpm 0,29Aat 3,0V:idle 10.300 rpm 0,17Aload 7.350 rpm 0,44 AMemensions:Outer diameter: 21mmLength without shaft: 29mmLength of the output shaft: 8,5mm and diameter: 2mmSoldering tabs on the back.

Available immediately, delivery time: 1-4 days

Product number: 3034

€ 4,70 *
GM22U15,12V planetary gear motor 15U / min. With a low,
GM22U15,12V planetary gear motor 15U / min. With a low,
GM22U15,12V planetary gear motor 15 rpm. With quiet, robust planetary gear. For actuators, ramps, servos, rotary drives, etc. Motor data:Voltage: 12VPoles: 3Interference suppression: noIdle speed: 8000 rpmIdle current: 50 mANominal speed: 6700 rpmNominal current: 200mANominal torque: 0,22 NcmNominal power: 1,5 WShort-term max. load speed: 4000 rpmShort-term max. load current: 500mAShort-term max. load torque: 0,65 NcmShort-term max. load power: 2,9 WBlocking current: 1 ABlocking torque: 1,3 NcmData for motor with gearbox:Reduction ratio: 455:1Diameter: 22mmLength: 58mmWeight: 71grShaft diameter: 4mm (11mm long) with 1-sided Flattening 3,5mmIdle speed: 18 rpmNominal speed: 15 rpmNominal torque: 70 NcmShort-term max. load speed: 9 rpmShort-term max. load torque: (207 Ncm)Max. torque: 75 NcmYou can find the matching motor mount under article 6241 (not included!)Attachment is via 4 M2 screws, in threaded holes M2 on bolt circle 18mm, each offset by 90°.

Available immediately, delivery time: 1-4 days

Product number: 6180

€ 39,29 *
RB30U53,12V gear motor 53 U / min. Alternative to
RB30U53,12V gear motor 53 U / min. Alternative to
RB30U53,12V gear motor 53 rpm. Alternative to the RB35-Plus51 but with a smaller size. Motor data:Voltage: 12VPoles: 3Interference suppression: noIdle speed: 6500 rpmIdle current: 150 mANominal speed: 5300 rpmNominal current: 530 mANominal torque: 0,7 NcmNominal power: 4,2 WShort-term max. load speed: 3250 rpmShort-term max. load current: 1100 mAShort-term max. load torque: 1,85 NcmShort-term max. load power: 6,2 WBlocking current: 2,2 ABlocking torque: 3,7 NcmData for motor with gearbox:Reduction ratio: 100:1Diameter: 30mmLength: 61,6 mmWeight: 162 gShaft diameter: 5mmIdle speed: 65 rpmNominal speed: 53 rpm.Nominal torque: 46 NcmShort-term max. load speed: 33 rpm.Short-term max. load torque: (122 Ncm)Max. torque: 90 Ncm

Available immediately, delivery time: 1-4 days

Product number: 6187

€ 29,75 *
Motorhalter engines Pairing GM22-gear
Motorhalter engines Pairing GM22-gear
Motor mount suitable for GM22 gear motors. Universal bracket with screws and nuts. Width 61,5mm, suitable for Tamiya frames. The respective GM22 gear motor is attached to the motor mount with 4 screws (M2x5mm).Scope of delivery:1x motor mount4x Phillips screw M2x5mm4x Phillips screw M3x8mm4x nut M3

Available immediately, delivery time: 1-4 days

Product number: 6241

€ 10,59 *
%
1x Truck Motor Truck Torque 7,2Volt, 33T, (56526)
1x Truck Motor Truck Torque 7,2Volt, 33T, (56526)
1x Truck Motor Truck Torque 7,2Volt, 33T, (56526). 68mm length overall, 35mm diameter. Motor shaft 3,17x10mm. Weight 180g. Suppressed, with cables and plug. Recommended motor for Tamiya trucks. High-torque motor for 7,2V. Easily interchangeable with the kit motor.Features:2 ball bearingsLower power consumption than the kit motorHigh torque of up to 39,2mNcmFully suppressedIdle speed: 12.500rpm.

Available immediately, delivery time: 1-4 days

Product number: 10058

€ 54,99 * € 58,99 * (6.78% saved)
UATX holder for underfloor drive. Motor mount for Tamiya mod
UATX holder for underfloor drive. Motor mount for Tamiya mod
UATX holder for underfloor drive. Motor holder for Tamiya models with cardan shaft length >100mm. For 4-axle vehicles. The sheet thickness is: 2mm. The UATX and a GM32 gear motor create a quiet, space-saving and almost backlash-free underfloor drive for Tamiya models. Replaces the standard three-speed gearbox, very easy to install with special motor holder and KUPP6 driver. Driving speed with U390 corresponds to TM72 or TP2 in 1st gear. Sufficient space for correct arrangement of the steering rod. Set of motor holder and KUPP6 cardan driver included. Price without gear motor. This version is designed for Tamiya models with long cardan shaft (>100mm) for four-axle vehicles with European driver's cab, the length is adjustable. Dimensions: 72 x 62 x 40 mm

Available immediately, delivery time: 1-4 days

Product number: 12298

€ 34,19 *
1x GM32U280, 12V planetary gear motor 280rpm. With
1x GM32U280, 12V planetary gear motor 280rpm. With
1x GM32U280, 12V planetary gear motor 280 rpm. With quiet, robust planetary gear. As a drive motor for small models. Motor data:Voltage: 12VPoles: 3Interference suppression: noIdle speed: 6500 rpmIdle current: 150 mANominal speed: 5300 rpmNominal current: 0,53 ANominal torque: 0,7 NcmNominal power: 4,2 WShort-term max. load speed: 3250 rpmShort-term max. load current: 1100 mAShort-term max. load torque: 1,85 NcmShort-term max. load power: 6,2 WBlocking current: 2,2 ABlocking torque: 3,7 NcmData for motor with gearbox:Reduction ratio: 19:1Diameter: 32mmLength: 61,8 mmWeight: 194 gShaft diameter: 6mmIdle speed: 342 rpmNominal speed: 279 rpm.Nominal torque: 9,1 NcmShort-term max. load speed: 171 rpm.Short-term max. load torque: 24 NcmMax. torque: 118 Ncm

Available immediately, delivery time: 1-4 days

Product number: 7396

€ 41,79 *
1 UAW assembly set of motor mounts, universal joint and shaft
1 UAW assembly set of motor mounts, universal joint and shaft
1 UAW assembly set consisting of motor mount, cardan joint and shaft for GM32 motors and Wedico models. This creates a space-saving underfloor drive. Dimensions: approx. 61x52x38mm.

Available immediately, delivery time: 1-4 days

Product number: 7658

€ 63,00 *
GM42U1425, 12V planetary gear motor 1425U / min. With
GM42U1425, 12V planetary gear motor 1425U / min. With
GM42U1425, 12V planetary gear motor 1425 rpm. With quiet, robust planetary gear. As a drive motor for a 1:8 scale model with a 10:1 axle reduction Motor data: Voltage: 12VPoles: 5Interference suppression: noIdle speed: 7000 rpmIdle current: 900 mANominal speed: 5700 rpmNominal current: 5,5 ANominal torque: 7 NcmNominal power: 41,0 WShort-term max. load speed: 3500 rpmShort-term max. load current: 13 AShort-term max. load torque: 20,5 NcmShort-term max. load power: 75 WBlocking current: 26 ABlocking torque: 41 NcmData for motor with gearbox:Reduction ratio: 4:1Diameter: 45mmLength: 100 mmWeight: 456 gShaft diameter: 8mmIdle speed: 1750 rpm.Nominal speed: 1425 rpm.Nominal torque: 22 NcmShort-term max. load speed: 875 rpm.Short-term max. load torque: 66 NcmMax. torque: 150 NcmItem 11355 (not included) is available as a universal joint for this motor shaft.

Available immediately, delivery time: 1-4 days

Product number: 6188

€ 131,99 *
1x motor bracket Suitable motors to GM42-gear.
1x motor bracket Suitable motors to GM42-gear.
1x Engine mount suitable for GM42 geared motors. Universal angle with screws and nuts. Width 116mm, matching vehicle frame on the scale 1: 8.

Available immediately, delivery time: 1-4 days

Product number: 10193

€ 17,09 *
%
1 Motor CR-01 crawler engine 7,2V. 35 Turns. size 540
1 Motor CR-01 crawler engine 7,2V. 35 Turns. size 540
1 Motor CR-01 Crawler Motor 7,2V. 35 turns. Size 540. Speed ​​12000 rpm. Torque 36,7mN/m, sintered bearings. The powerful slow runner is ideal for truck and crawler models. Its 35 turns ensure a powerful torque. This motor is a perfect fit for the Tamiya crawlers and the 2- and 3-axle tractors.

Available immediately, delivery time: 1-4 days

Product number: 7443

€ 43,99 * € 57,99 * (24.14% saved)
GM42U325, 12V planetary gear motor 325U / min. With a low,
GM42U325, 12V planetary gear motor 325U / min. With a low,
GM42U325, 12V planetary gear motor 325 rpm. With quiet, robust planetary gear. As a drive motor for models in 1:8 scale with 3:1 axle reduction. Motor data:Voltage: 12VPoles: 5Interference suppression: no, interference suppression capacitors included.Data for motor with gear:Diameter: 45mmLength: 105 mm without shaft.Weight: 456 gShaft diameter: 8mmIdle speed: 400 rpmNominal speed: 325 rpmNominal torque: 79,5 NcmMax. torque: 100 NcmNominal power: 41WShort-term power: 75W.Item 11355 (not included) is available as a universal joint for this motor shaft.

Available immediately, delivery time: 1-4 days

Product number: 10556

€ 131,99 *
%
DC small motor 12V 2657W012CXR from Faulhaber
DC small motor 12V 2657W012CXR from Faulhaber
1x DC small motor 12V 2657W012CXR from Faulhaber. Nominal voltage 12V, output power approx. 34W. Idle speed approx. 5600 rpm. Sintered bearings. Shaft 4mm. 1x DC small motor 12V 2657W012CXR from Faulhaber. Nominal voltage 12V, output power approx. 34W. Idle speed approx. 5600 rpm. Sintered bearings. Shaft 4mm. Housing material: steel, black coatedWeight: 156g.clockwise rotation, seen on output shaftDiameter: 26mmHousing length: 57mmShaft length: 10mmMounting hole circle: 17mm with 3x M3 threadAvailable from stock!

Available immediately, delivery time: 1-4 days

Product number: 12137

€ 154,30 * € 163,15 * (5.42% saved)
Motorhalter engines Pairing RB30-gear
Motorhalter engines Pairing RB30-gear
Motor bracket Suitable motors to RB30-gear. Universal bracket with bolts and nuts. Width 61,5mm to match Tamiya frame.

Available immediately, delivery time: 1-4 days

Product number: 6240

€ 10,59 *
%
1x DC small motor 12V 3257G012CR from Faulhaber. Nominal voltage
1x DC small motor 12V 3257G012CR from Faulhaber. Nominal voltage
1x DC small motor 12V 3257G012CR from Faulhaber. Nominal voltage 12V, output power approx. 60W. Idle speed approx. 5700 rpm. Ball bearing. Shaft 5mm. Housing material: steel, black coatedWeight: 242g. Clockwise rotation, seen on output shaftDiameter: 32mmHousing length: 57mmShaft length: 10mmMounting hole circle: 22mm with 3x M3 threadAvailable from stock!
1

End of life - article no longer available!

Product number: 10933

€ 227,99 * € 243,35 * (6.31% saved)
Details
%
Truck engine 7,2 volts, 6500 rpm, Mighty Tuned 35T
Truck engine 7,2 volts, 6500 rpm, Mighty Tuned 35T
1x truck motor 7,2 volts, 6500 rpm, Mighty Tuned 35T (435116). 68mm length overall, 35mm diameter. Motor shaft 3,17x10mm. Weight 180g. Noise suppressed, with cables and plug. Technical data:Motor length without shaft output: 53mmMotor diameter: 36mmWeight: 176gThis motor is included in the Scania 770S 8x4/4 SLT kit as a drive motor. It can be used as a replacement motor on all Tamiya truck kits.

Available immediately, delivery time: 1-4 days

Product number: 12788

€ 44,99 * € 52,99 * (15.1% saved)
%
Wedico 550 engine 12V (12318). 16.000U. Diameter 37,3
Wedico 550 engine 12V (12318). 16.000U. Diameter 37,3
Wedico 550 motor 12V (12318). 16.000 rpm. Diameter 37,3 mm, length 667 mm. Shaft 3,17 mm (9 mm external), speed 16.234 rpm, no load 0,84 A, rated current 6,21 A. The new 550 motor in 12V is suitable for thicon and Tamiya truck gearboxes. The motor enables, for example, the installation of the thicon manual gearbox in WEDICO models with 12V operating voltage. Technical data: Nominal voltage: 12V DC Idle speed: 16234 rpm, idle current: 840mA Nominal speed: 14286 rpm, nominal current: 6,21A Efficiency approx. 75% Nominal power approx. 56W Nominal torque: 38 mNm Dimensions: Length: 66,7mm, motor shaft: 3,17 x 9mm, diameter: 37,3mm, mounting: M3x25mm, flange diameter: 12,95mm, weight: 224g

Available immediately, delivery time: 1-4 days

Product number: 13153

€ 29,94 * € 67,10 * (55.38% saved)