Black Week 2024 is underway! Look forward to great offers!

Go to home page
€ 0,00 *
Filter
%
1x Truck Engine 7,2Volt, 6500 U / min, Poison Truck Engine
1x Truck Engine 7,2Volt, 6500 U / min, Poison Truck Engine
1x Truck Engine 7,2Volt, 6500 U / min, Poison truck engine (206023). 68mm LOA, 35mm diameter. Motor shaft 3,17x10mm. Weight 180gr. Filtered with cables and connectors.

Available immediately, delivery time: 1-4 days

Product number: 6617

€ 12,65 * € 13,49 * (6.23% saved)
1 TruckPuller3 electric motor 12V Rated voltage. 62W, 6300U / min,
1 TruckPuller3 electric motor 12V Rated voltage. 62W, 6300U / min,
1 TruckPuller3 electric motor 12V nominal voltage 62W, 6300rpm, 3,7-14,4V, 2 ball bearings, motor shaft 3,2mm. -adjustable timing-removable-clockwise/anticlockwise rotation-2 ball bearings-540 size-with aluminum heat sink-with SMD interference suppression boardavailable again!

Available immediately, delivery time: 1-4 days

Product number: 6505

€ 29,99 *
%
1 TruckPuller3 electric motor 7,2V nominal voltage 48W, 6600rpm,
1 TruckPuller3 electric motor 7,2V nominal voltage 48W, 6600rpm,
1 TruckPuller3 electric motor 7,2V nominal voltage 48W, 6600rpm, 3,7-9,6V, 2 ball bearings, motor shaft 3,2mm. -adjustable timing-removable-clockwise/anticlockwise rotation-2 ball bearings-540 size-with aluminum heat sink-with SMD interference suppression boardavailable again!

Available immediately, delivery time: 1-4 days

Product number: 6434

€ 29,39 * € 29,99 * (2% saved)
1x TM72, Truck Engine 7,2V with soft start. 6000 U / min
1x TM72, Truck Engine 7,2V with soft start. 6000 U / min
1x TM72, truck motor 7,2V with soft start. 6000 rpm when idling. Very similar to the TruckPuller 7,2V. Identical mounting diagram. Motor data:Voltage: 7,2VPoles: 5Interference suppression: 3x CLidling speed: 6000 rpmIdle current: 720 mANominal speed: 5200 rpmNominal current: 2,86 ANominal torque: 2,65 NcmNominal power: 14,0 WShort-term max. load speed: 3000 rpmShort-term max. load current: 9500 mAShort-term max. load torque: 10,5 NcmShort-term max. load power: 32 WBlocking current: 19 ABlocking torque: 21 NcmDiameter: 37mmLength: 57 mmShaft length: 75mmWeight: 218 gShaft diameter: 3,17mm

Available immediately, delivery time: 1-4 days

Product number: 6238

€ 26,60 *
1x DC miniature motor 6V 2224U006SR from Faulhaber. Nominal voltage
1x DC miniature motor 6V 2224U006SR from Faulhaber. Nominal voltage
1x DC small motor 6V 2224U006SR from Faulhaber. Nominal voltage 6V, output power approx. 4,55W. Idle speed approx. 8200 rpm. Sintered bearing. Shaft 2mm. Housing material: steel, black coatedWeight: 46g.Clockwise rotation, seen on output shaftDiameter: 22mmHousing length: 24,2mmShaft length: 6mmEfficiency: 82%Mounting hole circle: 12mm with 3x M2 threadAvailable from stock!This motor is often used as a drive motor in the Linde forklift truck from robbe.

No longer available

Product number: 8414

€ 72,35 *
Details
TM120, Truck Engine 12V in with soft start 5000 U / min
TM120, Truck Engine 12V in with soft start 5000 U / min
TM120, truck motor 12V with soft start 5000 rpm at idle. Very similar to the TruckPuller 12V. Identical mounting diagram. Motor data:Voltage: 12VPoles: 5Interference suppression: no, 3x capacitors includedIdle speed: 5000 rpmDiameter: 37mmLength: 57 mmLength of the shaft stub: 5mmWeight: 245 grShaft diameter: 3,17mm

Available immediately, delivery time: 1-4 days

Product number: 7901

€ 15,40 *
%
Truck engine 7,2 volts, 6500 rpm, Venom truck engine
Truck engine 7,2 volts, 6500 rpm, Venom truck engine
Truck motor 7,2 volts, 6500 rpm, Venom truck motor (906043). 68mm length overall, 35mm diameter. Motor shaft 3,17x10mm. Weight 180g. Noise suppressed, with cables and plug.

Available immediately, delivery time: 1-4 days

Product number: 7447

€ 26,99 * € 31,49 * (14.29% saved)
%
Wedico Bühler motor 12V (13.055) (115). Diameter 35mm
Wedico Bühler motor 12V (13.055) (115). Diameter 35mm
Wedico Bühler Motor 12V (13.055) (115). Diameter 35mm, length 65mm without shaft, shaft 4mm (12,5mm external), speed 2.900 rpm, without load 0,4A white plastic gear, 14 teeth.Collar diameter on the motor: 17,8mm, height 2,5mm - both sides.Max. current: 6ATorque: 9,2NcmOne side with ball bearings, other side with dome bearings.Basic interference suppression by 2 chokes.Protection class: IP40.Carbon brushes, 8-part collector.Max. output power approx. 16W.Dimensions of the previous version: (no longer available)Length 71mm without shaftDiameter 40mm

Ready to ship in 5 days, delivery time 1-4 days

Product number: 4322

€ 54,95 * € 67,10 * (18.11% saved)
1x small motor DC 2-6V DC for easy
1x small motor DC 2-6V DC for easy
1x small motor DC 2-6V direct current for simple applications. Weight 20g. Shaft diameter 2mm. Technical data:at 1,5V:idle 4900 rpm 0,14Aload 3375 rpm 0,29Aat 3,0V:idle 10.300 rpm 0,17Aload 7.350 rpm 0,44 AMemensions:Outer diameter: 21mmLength without shaft: 29mmLength of the output shaft: 8,5mm and diameter: 2mmSoldering tabs on the back.

Available immediately, delivery time: 1-4 days

Product number: 3034

€ 4,70 *
%
1x Truck Motor Truck Torque 7,2Volt, 33T, (56526)
1x Truck Motor Truck Torque 7,2Volt, 33T, (56526)
1x Truck Motor Truck Torque 7,2Volt, 33T, (56526). 68mm length overall, 35mm diameter. Motor shaft 3,17x10mm. Weight 180g. Suppressed, with cables and plug. Recommended motor for Tamiya trucks. High-torque motor for 7,2V. Easily interchangeable with the kit motor.Features:2 ball bearingsLower power consumption than the kit motorHigh torque of up to 39,2mNcmFully suppressedIdle speed: 12.500rpm.

Available immediately, delivery time: 1-4 days

Product number: 10058

€ 54,99 * € 58,99 * (6.78% saved)
%
1x DC miniature motor 12V 2642W012CR from Faulhaber. Nominal voltage
1x DC miniature motor 12V 2642W012CR from Faulhaber. Nominal voltage
1x DC small motor 12V 2642W012CR from Faulhaber. Nominal voltage 12V, output power approx. 21W. Idle speed approx. 6400 rpm. Ball bearing. Shaft 4mm. Housing material: steel, black coatedWeight: 114g. Clockwise rotation, seen on output shaftDiameter: 26mmHousing length: 42mmShaft length: 10mmMounting hole circle: 17mm with 3x M3 threadAvailable from stock!

No longer available

Product number: 8328

€ 139,00 * € 155,77 * (10.77% saved)
Details
%
1 Motor CR-01 crawler engine 7,2V. 35 Turns. size 540
1 Motor CR-01 crawler engine 7,2V. 35 Turns. size 540
1 Motor CR-01 Crawler Motor 7,2V. 35 turns. Size 540. Speed ​​12000 rpm. Torque 36,7mN/m, sintered bearings. The powerful slow runner is ideal for truck and crawler models. Its 35 turns ensure a powerful torque. This motor is a perfect fit for the Tamiya crawlers and the 2- and 3-axle tractors.

Available immediately, delivery time: 1-4 days

Product number: 7443

€ 43,99 * € 57,99 * (24.14% saved)
%
DC small motor 12V 2657W012CXR from Faulhaber
DC small motor 12V 2657W012CXR from Faulhaber
1x DC small motor 12V 2657W012CXR from Faulhaber. Nominal voltage 12V, output power approx. 34W. Idle speed approx. 5600 rpm. Sintered bearings. Shaft 4mm. Housing material: steel, black coatedWeight: 156g. Clockwise rotation, seen on output shaftDiameter: 26mmHousing length: 57mmShaft length: 10mmMounting hole circle: 17mm with 3x M3 threadAvailable from stock!

Available immediately, delivery time: 1-4 days

Product number: 12137

€ 154,30 * € 163,15 * (5.42% saved)
%
1x DC small motor 12V 3257G012CR from Faulhaber. Nominal voltage
1x DC small motor 12V 3257G012CR from Faulhaber. Nominal voltage
1x DC small motor 12V 3257G012CR from Faulhaber. Nominal voltage 12V, output power approx. 60W. Idle speed approx. 5700 rpm. Ball bearing. Shaft 5mm. Housing material: steel, black coatedWeight: 242g. Clockwise rotation, seen on output shaftDiameter: 32mmHousing length: 57mmShaft length: 10mmMounting hole circle: 22mm with 3x M3 threadAvailable from stock!

Available immediately, delivery time: 1-4 days

Product number: 10933

€ 227,99 * € 243,35 * (6.31% saved)
%
Truck engine 7,2 volts, 6500 rpm, Mighty Tuned 35T
Truck engine 7,2 volts, 6500 rpm, Mighty Tuned 35T
1x truck motor 7,2 volts, 6500 rpm, Mighty Tuned 35T (435116). 68mm length overall, 35mm diameter. Motor shaft 3,17x10mm. Weight 180g. Noise suppressed, with cables and plug. Technical data:Motor length without shaft output: 53mmMotor diameter: 36mmWeight: 176gThis motor is included in the Scania 770S 8x4/4 SLT kit as a drive motor. It can be used as a replacement motor on all Tamiya truck kits.

Available immediately, delivery time: 1-4 days

Product number: 12788

€ 44,99 * € 52,99 * (15.1% saved)
%
1x DC small motor 12V 3863H012CR from Faulhaber. Nominal voltage
1x DC small motor 12V 3863H012CR from Faulhaber. Nominal voltage
1x DC small motor 12V 3863H012CR from Faulhaber. Nominal voltage 12V, output power approx. 110W. Idle speed approx. 5600 rpm. Ball bearing. Shaft 6mm. Housing material: steel, black coatedWeight: 390g. Clockwise rotation, viewed from output shaftDiameter: 38mmHousing length: 64mmShaft length: 14 + 22mm (output on both sides!)Mounting hole circle: 22mm with 3x M3 threadAvailable from stock!

Ready to ship in 5 days, delivery time 1-4 days

Product number: 10934

€ 409,99 * € 437,56 * (6.3% saved)
%
Wedico 550 engine 12V (12318). 16.000U. Diameter 37,3
Wedico 550 engine 12V (12318). 16.000U. Diameter 37,3
Wedico 550 motor 12V (12318). 16.000 rpm. Diameter 37,3 mm, length 667 mm. Shaft 3,17 mm (9 mm external), speed 16.234 rpm, no load 0,84 A, rated current 6,21 A. The new 550 motor in 12V is suitable for thicon and Tamiya truck gearboxes. The motor enables, for example, the installation of the thicon manual gearbox in WEDICO models with 12V operating voltage. Technical data: Nominal voltage: 12V DC Idle speed: 16234 rpm, idle current: 840mA Nominal speed: 14286 rpm, nominal current: 6,21A Efficiency approx. 75% Nominal power approx. 56W Nominal torque: 38 mNm Dimensions: Length: 66,7mm, motor shaft: 3,17 x 9mm, diameter: 37,3mm, mounting: M3x25mm, flange diameter: 12,95mm, weight: 224g

Available immediately, delivery time: 1-4 days

Product number: 13153

€ 29,94 * € 67,10 * (55.38% saved)