Adapter

PAGE

1x freewheel hub V3, plastic based on 2 Bearings

1x freewheel hub V3, plastic with seat for 2 ball bearings (1891). Bolt circle 25mm. 10 holes for M1,6, black ABS. Tamiya. Ball bearings are not included. See item no. 1891. Recommendation: Suitable stainless steel screws are items 3531, 6490, 2930, 6491. (depending on the length required).

Available immediately, delivery time: 1-4 days

Product number: 4554

€ 1,94 *

Subscriptions

1 freewheel hub V1, plastic with seat for 2 ball bearings

1 freewheel hub V1, plastic with seat for 2 ball bearings (1891). Bolt circle 25mm. 10 holes for M1,6, black ABS. Tamiya. Ball bearings are not included. See item no. 1891. Recommendation: Suitable stainless steel screws are items 3531, 6490, 2930, 6491. (depending on the length required).

Available immediately, delivery time: 1-4 days

Product number: 4552

€ 1,94 *

Subscriptions

1 hub drive axle V3, plastic with hexagon socket

1 hub drive axle V3, plastic with hexagon socket 12mm TAM. Bolt circle 25mm. 10 holes for M1,6, black ABS. Hub 19x19,6mm (height x diameter). Recommendation: Suitable stainless steel screws are items 3531, 6490, 2930, 6491. (depending on the length required).

Available immediately, delivery time: 1-4 days

Product number: 4551

€ 1,94 *

Subscriptions

1 freewheel hub V4, plastic with seat for 2 ball bearings

1 freewheel hub V4, plastic with seat for 2 ball bearings (1891). Bolt circle 25mm. 10 holes for M1,6, black ABS. Tamiya. Ball bearings are not included. See item no. 1891. Recommendation: Suitable stainless steel screws are items 3531, 6490, 2930, 6491. (depending on the length required).

Available immediately, delivery time: 1-4 days

Product number: 4555

€ 1,94 *

Subscriptions

1 hub drive axle, plastic with transverse slot WDC

1 hub drive axle, plastic with transverse slot WDC. Bolt circle 22mm. 10 holes for M1,6, black ABS. Version 1. 3-piece set. Additional information: When using M1,6 screws, M1,6 nuts are required on the back. If M2 screws are used, these can be screwed directly into the plastic - in this case no nuts are necessary. For 6mm axles with transverse pin for the frictional connection.

Available immediately, delivery time: 1-4 days

Product number: 5084

€ 1,75 *

Subscriptions

1 hub drive axle V1, plastic with hexagon socket

1 hub drive axle V1, plastic with hexagon socket 12mm TAM. Bolt circle 25mm. 10 holes for M1,6, black ABS. Recommendation: Suitable stainless steel screws are items 3531, 6490, 2930, 6491. (depending on the required length).

Available immediately, delivery time: 1-4 days

Product number: 4549

€ 1,94 *

Subscriptions

1 freewheel hub V2, plastic with seat for 2 ball bearings

1 freewheel hub V2, plastic with seat for 2 ball bearings (1891). Bolt circle 25mm. 10 holes for M1,6, black ABS. Tamiya. Ball bearings are not included. See item no. 1891. Recommendation: Suitable stainless steel screws are items 3531, 6490, 2930, 6491. (depending on the length required).

Available immediately, delivery time: 1-4 days

Product number: 4553

€ 1,94 *

Subscriptions

1 freewheel hub, natural aluminum with seat for 2 ball bearings (1462).

1 freewheel hub, natural aluminum with seat for 2 ball bearings (1462). Bolt circle 22mm. 10 threaded holes for M2, Wedico size. Ball bearings are not included. See article no. 1462. This hub is also available in black anodized. Diameter 25,4/14mm Total length 13,5mm Ball bearing seats: 9mm This hub is supplied without hub cap. Matching aluminum hub caps are items 10954 and 10955. These two items will also be available in black anodized aluminum from mid-May 2018. Some photos show combinations of items that are not included. Ball bearings 4 (1462 pieces required) are suitable for 2mm axles, and ball bearings 5 (5216 pieces) are suitable for 2mm axles. Some photos show use with a trailer axle and 2 ball bearings (2x item 5216) for illustrative purposes. Axle and ball bearings are not included in delivery!

No longer available

Product number: 10953

€ 6,70 *

Subscriptions

Details

1 freewheel hub V3, plastic with seat for 2 ball bearings

1 freewheel hub V3, plastic with seat for 2 ball bearings (1462). Bolt circle 22mm. 10 holes for M1,6, black ABS. Wedico. Ball bearings are not included in delivery. See article no. 1462. Additional information: When using M1,6 screws, M1,6 nuts are required on the back. If M2 screws are used, these can be screwed directly into the plastic - in this case no nuts are necessary.

Available immediately, delivery time: 1-4 days

Product number: 5083

€ 5,95 *

Subscriptions

1 freewheel hub V2, plastic with seat for 2 ball bearings

1 freewheel hub V2, plastic with a seat for 2 ball bearings (1462). 22mm bolt circle. 10 holes for M1,6, black ABS. Wedico. Ball bearings are not included. See item no. 1462. Additional information: When using M1,6 screws, M1,6 nuts are required on the back. If M2 screws are used, they can be screwed directly into the plastic—in this case, no nuts are necessary.

Available immediately, delivery time: 1-4 days

Product number: 5082

€ 4,95 *

Subscriptions

Anhängernabe with lid, aluminum, bolt circle 22mm, 10x M1,6mm

1x trailer hub with cover, aluminum, bolt circle 22mm, 10x M1,6 thread. Not included: 2 ball bearings 4x9x4 WDC size. Scope of delivery:1x aluminum hub1x aluminum hub cover1x O-ring2 ball bearings are also required (not included). For 4mm axles e.g. item 1462 (dimensions 4x9x4).

Available immediately, delivery time: 1-4 days

Product number: 10144

€ 14,95 * € 15,90 * (5.97% saved)

Subscriptions

1x hub drive axle V4, plastic with Allen

1x hub drive axle V4, plastic with hexagon socket 12mm TAM. Bolt circle 25mm. 10 holes for M1,6, black, ABS. Type: Planet SMB Recommendation: Suitable stainless steel screws are items 3531, 6490, 2930, 6491. (depending on the required length).

Available immediately, delivery time: 1-4 days

Product number: 5229

€ 1,94 *

Subscriptions

Hexagon drivers (1 pair) with internal teeth,

Hexagon driver (1 pair) with internal teeth, wrench size 12mm. Height 6mm. Aluminum. For Tamiya drive axles. Supplied in 2 pieces = 1 pair.

Available immediately, delivery time: 1-4 days

Product number: 6550

€ 5,39 * € 6,19 * (12.92% saved)

Subscriptions

1 hub drive axle V2, plastic with hexagon socket

1 hub drive axle V2, plastic with hexagon socket 12mm TAM. Bolt circle 25mm. 10 holes for M1,6, black ABS. Recommendation: Suitable stainless steel screws are items 3531, 6490, 2930, 6491. (depending on the required length).

Available immediately, delivery time: 1-4 days

Product number: 4550

€ 1,94 *

Subscriptions

Front hub with lid, aluminum, PCD 25mm, 10x

Front wheel hub with cover, aluminum, bolt circle 25mm, 10x M1,6 thread. For RÜST rims. Not included: 2 ball bearings 5x11x4 (item 888). Tamiya size. (14110). Scope of delivery: 1 hub with cover. This aluminum hub fits the original Tamiya front axle. 2 ball bearings (item 888) are required per hub (not included). Item 4443 or 4442 (with standard tires) or 4441 (for wide tires) is suitable as a front axle rim. All standard rims with a 25mm bolt circle and 10 rim bolts also fit. Mechanically, these plastic rims also fit (pay attention to the total track width!): 4539, 4540, 4541, 4543, 4544, 4545, 7138, 7139.

Available immediately, delivery time: 1-4 days

Product number: 4445

€ 17,49 *

Subscriptions

Hub cover, natural aluminum with dome and 6kant finish

1 hub cover, natural aluminum with dome and 6kant finish. Diameter 18mm. Total length 14mm. Suitable for aluminum hub 10953 (not included). This item will be available in mid-May 2018 also in aluminum, black anodized.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 10954

€ 3,95 *

Subscriptions

1 SX hub cap (1:16) made of nickel silver cast. 18mm

1 SX hub cap (1:16) made of cast nickel silver. 18mm total diameter.

Available immediately, delivery time: 1-4 days

Product number: 8380

€ 3,30 *

Subscriptions

RIM adapter (2 piece) rear wheels for Euro (WDC-size)

Rim adapter (2 pieces) rear for Euro rims (WDC size), bolt circle 22mm, (220974). Suitable for the Veroma and Seitz rims in Wedico size! Plastic, black, with cross slot. The bolt circle pattern also fits the aluminum rims (Wedico size) from RÜST. The socket wrench with the item number 2826 (3mm) fits the enclosed cap screws. Cap screws (20 pieces), nickel-plated, 1,6x7mm are included.

Available immediately, delivery time: 1-4 days

Product number: 2477

€ 12,25 * € 12,60 * (2.78% saved)

Subscriptions

Tamiya wheel hub set HA black. For rear axle (2)

Wheel hub set HA black. Can be used with the standard 4 mm wheel nuts. To create a more realistic appearance of the wheel hubs. For a rear axle, 2 pieces

Available immediately, delivery time: 1-4 days

Product number: 11765

€ 21,99 * € 24,49 * (10.21% saved)

Subscriptions

RIM adapter (2 pieces) for front wheels Euro (WDC-size)

Rim adapter (2 pieces) front for Euro rims (WDC size), bolt circle 22mm, (220975). Suitable for the Veroma and Seitz rims in Wedico size! The bolt circle pattern also fits the aluminum rims (Wedico size) from RÜST. The socket wrench with the item number 2826 (3mm) fits the enclosed cap screws.

Available immediately, delivery time: 1-4 days

Product number: 2476

€ 11,52 *

Subscriptions

1x spacer aluminum suitable for hubs and rims with 25mm

1x aluminum spacer ring suitable for hubs and rims with 25mm bolt circle. Thickness 1mm. 10 holes 1,7mm on 25mm bolt circle. Also suitable for wheel spacers. When used in pairs with the hubs (item 10438), the wheel space can be widened by 2mm.

Available immediately, delivery time: 1-4 days

Product number: 10439

€ 4,94 *

Subscriptions

Hub cover, aluminum black with dome and 6kant finish

1 hub cover, black aluminum with dome and hexagonal end. Diameter 6mm. Total length 18mm. Suitable for aluminum hub 14+10953 (not included). This article is identical to article 10967 (aluminum, natural) and has been anodized black.

No longer available

Product number: 10968

€ 4,65 *

Subscriptions

Details

1 hub cover, natural aluminum. Flat design. diameter

1 hub cover, natural aluminum. Flat design. Diameter 18mm. Total length 4mm. Suitable for aluminum hub 10953 (not included). This item will be available in mid-May 2018 also in aluminum, black anodized.

End of life - article no longer available!

Product number: 10955

€ 3,70 *

Subscriptions

Details

Wheel adapter (2 piece) rear wheels Euro (WDC-size), L

Rim adapter (2 pieces) rear for Euro rims (WDC size), bolt circle 22mm, (220972). Suitable for the robbe Cargo series, Seitz rims in Wedico size! Plastic, black, with cross slot. Scope of delivery:2x rim adapter, plastic, black, for robbe Cargo series2x cover caps20x nickel-plated cap screws M1,6x7mm

Available immediately, delivery time: 1-4 days

Product number: 10181

€ 10,84 *

Subscriptions

Rear hub with lid, aluminum, PCD 25mm, 10x

Rear wheel hub with cover, aluminum, bolt circle 25mm, 10x M1,6 thread. For RÜST rims. With aluminum hub cap, O-ring. Tamiya size (14010). Outer diameter of the hub cap: 17,8mm. These adapters fit all original Tamiya drive axles (those with the SW12 hexagon socket). The adapters also fit the self-locking drive axle from Carson (item 10031).

Available immediately, delivery time: 1-4 days

Product number: 4447

€ 18,49 *

Subscriptions

1 freewheel hub V3, plastic with seat for 2 ball bearings (1

1 freewheel hub V3, plastic with seat for 2 ball bearings (1462). Bolt circle 22mm. 10 holes for M1,6, white PLA. Wedico. Ball bearings are not included in delivery. See article no. 1462. The 10 holes on the bolt circle 22mm are intended for M1,6 screws and nuts. When using M2 screws, these can be screwed directly into the material - without the need for nuts. The choice is left to the buyer.

Available immediately, delivery time: 1-4 days

Product number: 10784

€ 5,95 *

Subscriptions

Wheel adapter (2 pieces) for trailer wheels (WDC)

Rim adapter (2 pieces) for trailer rims (WDC). Bolt circle diameter 22mm. (221258). Matching bearings 9x5x3mm - not included! The socket wrench with the item number 1,6 (7mm) fits the enclosed cap screws M11449x2826mm (item 3). Matching ball bearings (for 5mm axle) 9x5x3mm, item 5216.

Available immediately, delivery time: 1-4 days

Product number: 2478

€ 16,77 *

Subscriptions

Freewheel hub, aluminum black with seat for 2 ball bearings

1 freewheel hub, black aluminum with seat for 2 ball bearings (1462). Bolt circle 22mm. 10 threaded holes for M2, Wedico size. Ball bearings are not included in delivery. See item no. 1462. This hub is identical to item 10953 (aluminum, natural) and has been anodized black. Diameter 25,4/14mm Total length 13,5mm This hub is supplied without hub cap. Matching aluminum hub caps are items 10954 and 10955. Also available in black anodized. Some photos show combinations of items that are not included. This item replaces (together with the hub caps) the previous item 5083.

No longer available

Product number: 10967

€ 6,99 *

Subscriptions

Details

Tamiya wheel hub set VA black. For front axle (2)

Wheel hub set VA black. Can be used with standard 4 mm wheel nuts. To create a more realistic appearance of the wheel hubs. For a front axle, 2 pieces. 300056556.

Available immediately, delivery time: 1-4 days

Product number: 11764

€ 19,99 * € 21,99 * (9.1% saved)

Subscriptions

1x aluminum hub fits Tamiya-drive axles with Sechskan

1x aluminum hub suitable for Tamiya drive axles with hexagon SW12. For use with rims with 22mm bolt circle! With 1 hub cap (aluminum) with O-ring fastening. 1 pieces are required for 2 axle! This aluminum hub is suitable for mounting rims with the Wedico scale with 22mm bolt circle on a Tamiya axle with SW12 hexagon output. Suitable for all rims with 10-hole fastening with 1,6mm or 2,0mm screws. There are 10 threaded holes each with 1,6mm and 2,0mm. The different threaded holes are each offset by 18° from each other.

Available immediately, delivery time: 1-4 days

Product number: 10109

€ 18,85 *

Subscriptions

Hub for Tamiya rear axle Alu -ScaleDRIVE-

2 aluminum wheel hubs for Tamiya rear axle. For mounting the rims on the rear axle, ScaleART 10-hole drilling pattern, suitable for truck models in 1:14 scale. 2 wheel hubs turned from aluminum.

Available immediately, delivery time: 1-4 days

Product number: 9628

€ 47,49 *

Subscriptions

Hub driven front axle, V2 with hexagon socket 12mm

Driven front axle hub, V2 with 12mm TAM hexagon socket. Bolt circle 25mm. 10 holes for M1,6, black/white ABS. Hub 3D printed, cover injection molded. Lesu. Hub body: 18mm wide, 29mm diameter. Suitable for the driven steering axles from Lesu/thicon.

Available immediately, delivery time: 1-4 days

Product number: 10699

€ 6,95 *

Subscriptions

Hub driven front axle, V1 with hexagon socket 12mm

Hub driven front axle, V1 with hexagon socket 12mm TAM. Pitch circle 25mm. 10 holes for M1,6, black / white ABS. 3D printed hub, injection molded cover. Suitable for Lesu / thico.

Available immediately, delivery time: 1-4 days

Product number: 10698

€ 6,95 *

Subscriptions

Front hub with cover, aluminium, bolt circle 25mm, 10x 1,6mm

Front wheel hub with cover, aluminum, bolt circle 25mm, 10x M1,6 thread. For RÜST rims. Not included: 2 ball bearings 5x11x4 (item 888). Tamiya size. Scope of delivery: 1 hub with cover. This aluminum hub fits the original Tamiya front axle. 2 ball bearings (item 888) are required per hub (not included). Item 4443 or 4442 (with standard tires) or 4441 (for wide tires) is suitable as a front axle rim. All standard rims with a 25mm bolt circle and 10 rim bolts also fit. Mechanically, these plastic rims also fit (total track width must be taken into account!): 4539, 4540, 4541, 4543, 4544, 4545, 7138, 7139.

Available immediately, delivery time: 1-4 days

Product number: 12904

€ 17,49 *

Subscriptions

Hub cover, aluminum black. Flat design. diameter

1 hub cover, aluminum black. Flat design. Diameter 18mm. Total length 4mm. Suitable for aluminum hub 10953 + 10967 (not included). This article is identical to article 10955 (aluminum, natural) and was finally black anodized.

Available immediately, delivery time: 1-4 days

Product number: 10969

€ 4,50 *

Subscriptions

1x low loader aluminum hub with hub cover. 1 aluminum hub, 1

1x low-loader aluminum hub with hub cap. 1 aluminum hub, 1 aluminum hub cap. Suitable: 2 ball bearings 4x9x4 (not included). Suitable for plastic rims (low-loader) from Seitz-Modellbau. Scope of delivery: 1 aluminum hub 1 aluminum hub cap Outer diameter 17mm. Bolt circle diameter 14mm - 8 holes M1,2. Suitable ball bearings: item 1462 - for 4mm axles. Suitable ball bearings: item 5216 - for 5mm axles. Suitable screws: item 3145. 8 screws/rim set.

Available immediately, delivery time: 1-4 days

Product number: 8865

€ 7,10 *

Subscriptions

Rim adapter (2 pieces) front for robbe aluminum (Euro rim)

Rim adapter (2 pieces) front for robbe aluminum (Euro rim). Bolt circle diameter 22mm. (220971). With 1,6mm thread. Aluminum hubs, hub caps made of black plastic. Suitable for all rims with a bolt circle diameter of 22mm. The socket wrench with the item number 2826 (3mm) fits the enclosed cap screws. Cap screws (20 pieces), nickel-plated, 1,6x7mm are included.

Available immediately, delivery time: 1-4 days

Product number: 2624

€ 21,90 *

Subscriptions

Hub driven front axle, V4 with hexagon socket 12mm

Hub driven front axle, V4 with hexagon socket 12mm TAM. Pitch circle 25mm. 10 holes for M1,6, black / white ABS. 3D printed hub, injection molded cover. Suitable for Lesu / thicon.

Available immediately, delivery time: 1-4 days

Product number: 10700

€ 6,95 *

Subscriptions

Hub driven front axle, V2 with hexagon socket 12mm TAM

Hub driven front axle, V2 with hexagon socket 12mm TAM. Pitch circle 25mm. 10 holes for M1,6, black / white ABS. 3D printed hub, injection molded cover. Fits the driven Carson steering axle.

Available immediately, delivery time: 1-4 days

Product number: 11288

€ 6,95 *

Subscriptions

Wheel hub, aluminium, 12mm hexagon. For 4mm axles with

Wheel hub, aluminum, 12mm hexagon. For 4mm axles with cross pin 2x10mm. 4 pieces.

Available immediately, delivery time: 1-4 days

Product number: 7812

€ 9,98 * € 10,59 * (5.76% saved)

Subscriptions

Hub for Tamiya Front - Scale Drive

2 wheel hubs for Tamiya front axle ScaleART 10-hole drilling pattern. 2 wheel hubs made of GRP, 4-way ball-bearing adapter for mounting on the Tamiya front axle are included. Bolt circle of the rim bolts: 22mm.

Available immediately, delivery time: 1-4 days

Product number: 9627

€ 26,50 *

Subscriptions

Aluminum hub suitable for driven steering axle with SW12 6-kan

1x aluminum hub suitable for driven steering axles with hexagon SW12. For use with rims with 25mm bolt circle! With 1 hub cap (aluminum) with O-ring fastening. 1 hubs are required for 2 axle. Suitable for the driven, LESU steering axles. Matching wide rims with round hole motif (not included) article 4441. Outer diameter: 29,7mm Bolt circle diameter: 25mm with 10x M1,6 thread Outer diameter of hub shoulder: 18mm Drive: via hexagon socket to match the hexagon socket SW12 Central bore: 4mm With article 10439 (not included) the track width can be widened by 2mm each (when using 1 spacer ring per side). The use of VA hexagon screws (article 6) is recommended.

Available immediately, delivery time: 1-4 days

Product number: 12909

€ 16,90 *

Subscriptions

Rear axle hub for rim 37 / 34mm ALU

1 rear axle hub for rim 37/34mm ALU. Hub caps are not included. WDC scale. There are matching hub caps made of nickel silver cast for this hub: KAT design: Article 8379 SX design: Article 8380

Available immediately, delivery time: 1-4 days

Product number: 3805

€ 8,95 *

Subscriptions

1x aluminum hub suitable for Tamiya-drive axles with 6 hexagonal

1x aluminum hub suitable for Tamiya drive axles with hexagon SW12. For use with rims with 25mm bolt circle! With 1 hub cap (aluminum) with O-ring fastening. 1 hubs are required for 2 axle. Also suitable for the driven, self-locking axles (item 10032). Matching rims with round hole motif (not included) item 4441. Outer diameter: 29,7mm Bolt circle diameter: 25mm with 10x M1,6 thread Outer diameter of hub shoulder: 16,5mm Drive: via internal square to match the external hexagon SW12 Central bore: 4mm With item 10439 (not included) the track width can be widened by 2mm each (when using 1 spacer ring per side). The use of VA hexagon screws (item 6) is recommended.

Available immediately, delivery time: 1-4 days

Product number: 10438

€ 14,99 *

Subscriptions

RIM adapter trailer axle set with 2 piece. 5mm bore

Rim adapter trailer axle set with 2 pieces. 5mm bore, with plastic dummy hubs, black. robbe 33350035 Including 4 ball bearings 4x9x4mm. Suitable for all rims with a bolt circle diameter of 22mm. Ball bearings are included!

No longer available

Product number: 6493

€ 14,90 *

Subscriptions

Details

Hub for Tamiya Front Alu -ScaleDRIVE-

2 aluminum wheel hubs for Tamiya front axle. ScaleART 10-hole drilling pattern 2 wheel hubs made of aluminum. 4-way ball bearing, adapter for mounting on the Tamiya front axle is included. These hubs only fit the ScaleDrive rims! Wheel bolts M2, used as wheel studs M2 nuts on the outside. Bolt circle 22mm Required central hole on the rim: 25,5mm Outside diameter: 33mm Total width: 15,2mm 2 ball bearings per hub (1x 14/9/4,5mm 1x 4/9/4mm) For use on standard Tamiya front axles. Adapter is included.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9629

€ 47,48 *

Subscriptions

Hub driven front axle, V1 with hexagon socket 12mm TAM

Hub driven front axle, V1 with hexagon socket 12mm TAM. Pitch circle 25mm. 10 holes for M1,6, black / white ABS. 3D printed hub, injection molded cover. Fits the driven Carson steering axle.

Available immediately, delivery time: 1-4 days

Product number: 11287

€ 6,95 *

Subscriptions

Rear hub with lid, aluminum, PCD 25mm, 10x

Rear wheel hub with cover, aluminum, bolt circle 25mm, 10x M1,6 thread. For RÜST rims. With precision cast hub cover. Tamiya size. (14011). Outer diameter of the hub cover: 17,8mm. This hub only fits the RÜST differential axles with a reduction ratio of 2,66:1 and 5:1! (Item 4449, 4450, 4452, 4453)

Available immediately, delivery time: 1-4 days

Product number: 8005

€ 18,49 *

Subscriptions

Rim adapter (2 pieces) at the rear for Euro rims (robbe), aluminum

Rim adapter (2 pieces) rear for Euro rims (robbe), bolt circle 22mm, (220970). Suitable for the robbe Cargo series, Seitz rims in Wedico size! 5mm axle. Aluminum with M1,6 threaded holes. Scope of delivery:2x rim adapter, aluminum with cross slot, for robbe Cargo series2x cover caps20x nickel-plated cap screws M1,6x7mm

Available immediately, delivery time: 1-4 days

Product number: 12316

€ 20,90 * € 21,50 * (2.79% saved)

Subscriptions

Trailer hub with cover, aluminum, bolt circle 25mm, 10x 1,6mm

Trailer hub with cover, aluminum, bolt circle 25mm, 10x M1,6 thread. For Tamiya size for hexagon socket SW6. (12). This trailer hub fits perfectly with the Alcoa center rim for trailer axle (item 14001).

Available immediately, delivery time: 1-4 days

Product number: 12903

€ 16,90 *

Subscriptions

1 pair of aluminum hubs (2 pieces), suitable for the drive axle

1 pair of aluminum hubs (2 pieces), suitable for the drive axle item 2469. With cross slot, 8x M1,4 thread, for 5mm axle. Drive hub 17/11x11mm. These hubs can also be installed together with the rims item 5113 or 8544 and the drive axle item 2469!

No longer available

Product number: 8345

€ 19,00 *

Subscriptions

Details

Aluminum hub suitable for Carson powered steering axle

1x aluminum hub suitable for driven steering axles with hexagon SW12. For use with rims with 25mm bolt circle! With 1 hub cap (aluminum) with O-ring fastening. 1 hubs are required for 2 axle.Suitable for the driven, self-locking axles (item 10032).Matching wide rims with round hole motif (not included) item 4441.Outer diameter: 29,7mmBolt circle diameter: 25mm with 10x M1,6 threadOuter diameter of hub shoulder: 18mmDrive: via hexagon socket to match the hexagon socket SW12Central bore: 4mmWith item 10439 (not included) the track width can be widened by 2mm each (when using 1 spacer ring per side).The use of VA hexagon screws (item 6) is recommended.

Available immediately, delivery time: 1-4 days

Product number: 12906

€ 16,90 *

Subscriptions

Aluminum hub suitable for driven steering axles with SW12 6-ka

1x aluminum hub suitable for driven steering axles with hexagon SW12. For use with rims with 25mm bolt circle! With 1 hub cap (aluminum) with O-ring fastening. 1 hubs are required for 2 axle. Suitable for the driven steering axles from LESU. Matching narrow rims with round hole motif (not included) article 4442. Outer diameter: 29,7mm Bolt circle diameter: 25mm with 10x M1,6 thread Outer diameter of hub shoulder: 18mm Drive: via hexagon socket to match the hexagon socket SW12 Central bore: 4mm With article 10439 (not included) the track width can be widened by 2mm each (when using 1 spacer ring per side). The use of VA hexagon screws (article 6) is recommended.

Available immediately, delivery time: 1-4 days

Product number: 12910

€ 16,90 *

Subscriptions

Rim adapter (2 pieces) trailer for double tires

Rim adapter (2 pieces) trailer for double tires (WDC size), bolt circle 22mm. Suitable for the Veroma and Seitz rims in Wedico size! Aluminum, natural, with ball bearings. Rim adapter for trailers/semi-trailers with double tires. Made of aluminum, thread 1,6mm, hub cover with O-ring for easy removal. Suitable for the aluminum and plastic rims with 22mm bolt circle from Veroma or Seitz. For 4mm axles. Scope of delivery: 2 rim adapters (aluminum) with ball bearing seat 9mm 2 hub covers (aluminum), optionally plastic SAF cover 2 O-rings 20 cap screws M1,6x7mm 4 ball bearings 4x9x4

Ready to ship in 5 days, delivery time 1-4 days

Product number: 13305

€ 25,89 *

Subscriptions

Rear hub with cover, aluminum, bolt circle 25mm, black

Rear wheel hub with cover, aluminum, bolt circle 25mm, 10x M1,6 thread. For RÜST rims. With precision cast hub cap. Tamiya size. (14010). Outside diameter of the hub cap: 17,8mm. Black anodized.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 10726

€ 19,99 *

Subscriptions

Aluminum hub suitable for Tamiya drive axles black

Aluminum hub suitable for Tamiya drive axles with hexagon SW12. For use with rims with 25mm bolt circle! With 1 hub cap (aluminum) with O-ring fastening. Black anodized.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 10725

€ 16,99 *

Subscriptions

PAGE