Go to home page
€ 0,00 *
Filter
Sleeve 4x0,5x7mm, nickel-plated, 1 piece
Sleeve 4x0,5x7mm, nickel-plated, 1 piece
1 sleeve 4x0,5x7mm, nickel-plated.

Available immediately, delivery time: 1-4 days

Product number: 6634

€ 0,70 *
1x eye bolt M2x11, MS nickel-plated. 1 piece. head 4mm
1x eye bolt M2x11, MS nickel-plated. 1 piece. head 4mm
1x eyebolt M2x11, nickel-plated brass. 1 piece. Head 4mm outside. Bore 1,7mm. If not available, we may supply M2x16mm!

Available immediately, delivery time: 1-4 days

Product number: 3629

€ 0,87 *
1x lower layer leaf spring (short). 6mm wide, about 56mm long
1x lower layer leaf spring (short). 6mm wide, about 56mm long
1x lower layer leaf spring (short). 6mm wide, approx. 56mm long. 2 holes 3mm at a distance of 10mm from the axle mount. 1 piece. This type of spring is used in Wedico chassis as the lower layer of the AF spring sets (old chassis).

Available immediately, delivery time: 1-4 days

Product number: 6647

€ 1,34 *
1x middle layer leaf spring (middle). 6mm wide, about 69mm
1x middle layer leaf spring (middle). 6mm wide, about 69mm
1x middle layer leaf spring (medium). 6mm wide, approx. 69mm long. 2 holes 3mm at a distance of 10mm from the axle mount. 1 piece. This type of spring is used in Wedico chassis as the middle layer of the AF spring sets (old chassis).

Available immediately, delivery time: 1-4 days

Product number: 7381

€ 1,59 *
topsheet leaf spring (long 70mm). 6mm wide, about 70mm
topsheet leaf spring (long 70mm). 6mm wide, about 70mm
1x upper layer leaf spring (long, 70mm). 6mm wide, approx. 70mm long. 2 holes 3mm at a distance of 10mm from the axle mount. 1 piece. (Total length 75mm). Used on Wedico low loaders. This type of spring is used on Wedico low loaders as the main spring of the AF spring sets (old chassis). This spring layer is slightly shorter than the main spring of the standard AF spring sets.

Available immediately, delivery time: 1-4 days

Product number: 7382

€ 2,89 *
%
Stainless steel spring for standard chassis (455)
Stainless steel spring for standard chassis (455)
Stainless steel spring sets for standard chassis (455). Spring width 6mm. Spring eye distance, unloaded 80mm. 2 main springs and 2 reinforcement springs each. Incl. screws, nuts, washers and tubes. 2 spring holes (for axle attachment) 3,2mm, distance 10mm. Height of main spring in unloaded state (to the center of the eyes): 13mm.

Available immediately, delivery time: 1-4 days

Product number: 4013

€ 12,50 * € 12,95 * (3.47% saved)
1 Kingpin Tamiya size. From V2A (stainless steel), with
1 Kingpin Tamiya size. From V2A (stainless steel), with
1 king pin Tamiya size. Made of V2A (stainless steel), with fastening screw. Diameter 11mm, height 10mm, collar diameter 6,4mm. With 1 countersunk screw M3x16mm.

Available immediately, delivery time: 1-4 days

Product number: 7747

€ 3,69 *
%
2 aluminum U-profile, 1m long 21x7x1,5mm material thickness
2 aluminum U-profile, 1m long 21x7x1,5mm material thickness
2 aluminum U-profiles, 1m long, 21x7x1,5mm, material thickness 1,5mm, drawn from bright aluminum. Rounded edges. Dimensions correspond to the Tamiya frame profile. (500907063). 2x 1m pieces.

Available immediately, delivery time: 1-4 days

Product number: 7652

€ 21,99 * € 24,49 * (10.21% saved)
1 sentence fender holder (4 pieces) for a fender. As
1 sentence fender holder (4 pieces) for a fender. As
1 set of fender brackets (4 pieces) for ONE fender. 3mm round material or pipe is suitable as a support rod (not included!). Brass. 4 pieces on the cast branch. Scope of delivery: 4x fender brackets (cast brass on the cast branch) each approx. 18x4mm 8x hexagon screw, brass, M6x1,6mm, SW6mm head height 2,5mm 1,2x nut, brass, M8, SW1,6 height 2,5mm - Suitable socket wrench SW1,5 article 2,5 (not included!)

Available immediately, delivery time: 1-4 days

Product number: 9942

€ 7,90 *
Leaf spring set -ScaleDRIVE-
Leaf spring set -ScaleDRIVE-
1x leaf spring set, kit, ScaleDRIVE fits the Tamiya chassis, as front axle suspension, material: plastic and titanium bronze, fits Tamiya and Scaledrive chassis. The eye distance of the main spring is 99mm.

Available immediately, delivery time: 1-4 days

Product number: 9619

€ 41,50 *
1x upper layer leaf spring (long). 6mm wide, about 85mm long. 2
1x upper layer leaf spring (long). 6mm wide, about 85mm long. 2
1x upper layer leaf spring (long). 6mm wide, approx. 85mm long. 2 holes 3mm at a distance of 10mm from the axle mount. For standard spring package Wedico. 1 piece. (Spring 1 part 32). This type of spring is used in Wedico chassis as the upper layer of the AF spring sets (old chassis). This part is part of the standard spring package from Wedico. It does NOT fit Wedico low loaders! The mounting eye distance is approx. 79mm.

Available immediately, delivery time: 1-4 days

Product number: 9295

€ 2,84 *
1 collar sleeve for suspension. Plastic. eg for
1 collar sleeve for suspension. Plastic. eg for
1 collar sleeve for suspension. Plastic. eg for professional Federnsätze. Black.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 6642

€ 1,89 *
Brake air coupling (1 pair) on MS casting branch. For scale
Brake air coupling (1 pair) on MS casting branch. For scale
Brake air coupling (1 pair) on the MS casting branch. Can be used for scales 1:8 to 1:16, can be coupled, -without function-. Compressed air connection (dummy).

Available immediately, delivery time: 1-4 days

Product number: 3003

€ 7,90 *
1x upper layer leaf spring NF, large. 6mm wide, about 83mm long.
1x upper layer leaf spring NF, large. 6mm wide, about 83mm long.
1x upper layer leaf spring NF, large. 6mm wide, about 83mm long. 2 holes 3mm at a distance of 10mm to the axle. 1 piece. (Total length about 83mm). Suspension hole distance approx. 78mm

Available immediately, delivery time: 1-4 days

Product number: 11434

€ 3,32 *
Set of fender holders (8 pcs.) For TWO fenders. stainless steel
Set of fender holders (8 pcs.) For TWO fenders. stainless steel
1 set of fender brackets (8 pieces) for TWO fenders. 3mm round material or tube is suitable as a support rod (not included!). Made of stainless steel. Universal fender bracket suitable for all fenders! 2 retaining clips each hold a 3mm round material. The retaining clips are screwed to the fender with 1,6mm screws (eg item 6490) and nuts (eg item 2579).

Available immediately, delivery time: 1-4 days

Product number: 12180

€ 8,20 *
%
Trailer support pair (Carson FLIEGL trough trailer)
Trailer support pair (Carson FLIEGL trough trailer)
1 pair of trailer supports (Carson FLIEGL dump trailer) 1 pair, metal. Aluminum housing, steel support with guide, INCLUDING 2 MOTORS, support plate. Total height 76-114mm. (907218). This set contains the supports suitable for the Fliegl trailer (item 8537) and 2 matching motors (item 8538). The motors are designed for operation with 7,2V. This set fits almost all Carson trailer chassis (except Goldhofer trailers).

Ready to ship in 5 days, delivery time 1-4 days

Product number: 8890

€ 175,00 * € 199,98 * (12.49% saved)
%
1x electric trailer supports Tamiya. Complete
1x electric trailer supports Tamiya. Complete
1x electric trailer supports Tamiya. Complete set (kit) for electrically powered trailer supports suitable for all Tamiya trailers. 300056505. The extension and retraction is operated together with the servo-operated fifth wheel coupling (included in the kit - but not the servo (this must be purchased separately)). The coupling and uncoupling operation is therefore controlled from the tractor unit. The supports can also be manually extended and retracted using the emergency switch that is operated by hand.Fifth wheel plates with the option of servo operation are available as items 11198 (plastic) and 9218 (aluminum).The limit switches are available as spare parts as item 12138.

Available immediately, delivery time: 1-4 days

Product number: 7736

€ 84,20 * € 115,00 * (26.78% saved)
%
1 aluminum locking for cab for all European
1 aluminum locking for cab for all European
1 aluminum lock for driver's cab for all European Tamiya tractors (with tilting cab). Small parts included. Existing frame holes can be used. 907156.

Available immediately, delivery time: 1-4 days

Product number: 9219

€ 30,99 * € 38,99 * (20.52% saved)
%
Spring set NF for professional frame NF (702)
Spring set NF for professional frame NF (702)
Spring Set NF for Senior frame NF (702). Spring width 6mm. Hole spacing axis: 10mm eye relief: 77mm.

Available immediately, delivery time: 1-4 days

Product number: 3371

€ 22,21 * € 24,95 * (10.98% saved)
%
1 fender set, black plastic. 2 semicircle-fenders
1 fender set, black plastic. 2 semicircle-fenders
1 set of mudguards, plastic, black. 2 half-round mudguards for Tamiya scale. 35mm wide, bevelled on both sides. Length 96mm. With fastening material. (500907137). 2 plastic mudguards, half-round, black, 96x35x48mm4 steel spacers4 screws, 4 nuts, 4 washersInstructions

Available immediately, delivery time: 1-4 days

Product number: 8823

€ 27,99 * € 28,99 * (3.45% saved)
%
CARSON Riser Kit for 3Achs Tamiya Tractors + 8mm
CARSON Riser Kit for 3Achs Tamiya Tractors + 8mm
CARSON lift kit for all Tamiya 3-axle tractors. Also fits Arocs 3348. Compatible with Tamiya axles and Carson self-locking axles. +8mm lift.

Available immediately, delivery time: 1-4 days

Product number: 11223

€ 37,98 * € 42,99 * (11.65% saved)
Servo kit "" kit "" -ScaleDRIVE-
Servo kit "" kit "" -ScaleDRIVE-
1 servo installation kit, kit, ScaleDRIVE for switching and steering servo fits Tamiya chassis for standard servos made of aluminum, black anodized

Available immediately, delivery time: 1-4 days

Product number: 9621

€ 37,00 *
%
Leaf spring set (short) with sockets LOA 71mm
Leaf spring set (short) with sockets LOA 71mm
Leaf spring set (short) with bushings, overall length 71mm. Bushing bore 3mm. Bore spacing 60-65 mm. (220969).

Available immediately, delivery time: 1-4 days

Product number: 2620

€ 13,52 * € 13,90 * (2.73% saved)
%
1x leaf spring set with bushes. 2 main springs, 2
1x leaf spring set with bushes. 2 main springs, 2
1x leaf spring set with bushings. 2 main springs, 2 reinforcement springs, 4 bushings. (2124). 2 axle mounting holes 3mm, hole spacing 10mm, spring width 6mm, total length of main spring 86mm, mounting spacing approx. 80mm

Available immediately, delivery time: 1-4 days

Product number: 1912

€ 13,52 * € 14,90 * (9.26% saved)
Stem control ST.80 (1,5A). For 7,2V.
Stem control ST.80 (1,5A). For 7,2V.
Support control ST.80 (1,5A). For 7,2V. This support control (7,2V version) can be used for all electrically operated trailer supports or ramps. Item 10676 is available as an option - this allows the supports or ramps to be operated manually. Up to 2 end position switches (1 end position switch for each end position) can be connected to the support control. This protects each support from mechanical overload when reaching the end position(s). End position buttons or switches such as our items: 6343, 6344, 7140, 7198, 9643 are preferably suitable for end position detection. These items are NOT included in the scope of delivery of the support control! The support control is supplied with illustrated installation instructions and allows simple and clean wiring on the model.

Available immediately, delivery time: 1-4 days

Product number: 10681

€ 14,99 *
%
1 geared motor for driving Fliegl trailer supports
1 geared motor for driving Fliegl trailer supports
1 gear motor for driving Fliegl trailer supports (item 8537). 2 motors are required for one pair of supports! For 7,2V operation. (907199). In order to be able to operate the supports of the Fliegl trailer electrically, 2 of this motor are required! (Pair of supports: item 8537). Under item number 8890 you will find a complete set (with a price advantage!) consisting of supports and support motors! Technical data: Overall length: 32,8mm Length without shaft: 26,6mm Max. Diameter (motor): 13,5mmShaft diameter: 3mm with one-sided flatteningNominal voltage: 7,4V DCWorking voltage: 6,0 - 8,0V DCIdle speed: 130 rpmSpeed ​​in continuous operation: 100 rpmContinuous current: 0,8AContinuous torque: 20mNmPeak torque: 75mNmReduction ratio: 100:1Weight: 12gr.

Available immediately, delivery time: 1-4 days

Product number: 8538

€ 33,36 * € 34,99 * (4.66% saved)
1 Kingpin Wedico size. From V2A (stainless steel), with
1 Kingpin Wedico size. From V2A (stainless steel), with
1 king pin Wedico size. Made of V2A (stainless steel), with fastening screw. Diameter 7mm, height 7,6mm, collar diameter 4,8mm. With 1 countersunk screw M3x12mm.

Available immediately, delivery time: 1-4 days

Product number: 7748

€ 3,55 *
Details
1x Traverse1 for Senior frames, aluminum, (751 loud Plan)
1x Traverse1 for Senior frames, aluminum, (751 loud Plan)
1x Traverse1 for professional frame, aluminum, (751 loud Plan).

Available immediately, delivery time: 1-4 days

Product number: 5146

€ 7,49 *
%
Fittings and tool box, 1 piece approx. 78x50x34mm,
Fittings and tool box, 1 piece approx. 78x50x34mm,
Fittings and tool box, 1 piece approx. 78x50x34mm, black, plastic. (402).

Ready to ship in 5 days, delivery time 1-4 days

Product number: 4264

€ 14,45 * € 14,95 * (3.34% saved)
%
1x aluminum clutch lever plate. 2/3 axis. Aluminum. Set includes
1x aluminum clutch lever plate. 2/3 axis. Aluminum. Set includes
1x aluminum clutch lever plate. 2/3-axle. Aluminum. Set contains 1x clutch lever plate made of aluminum and required fastening material. The plate is intended to be exchanged for the plastic plate from the kit of all 2- and 3-axle Tamiya tractors. This plate can also be used as a servo mount for the release servo for the fifth wheel coupling. Due to the universal attachment of the servo, any 40mm servo can be used to operate the fifth wheel plate release. E.g. item 3163 (Servo S148) or 10525 (Graupner DES-577).

Available immediately, delivery time: 1-4 days

Product number: 10637

€ 21,99 * € 29,99 * (26.68% saved)
1x lower layer leaf spring NF, small. 6mm wide, about 56mm lan
1x lower layer leaf spring NF, small. 6mm wide, about 56mm lan
1x lower layer leaf spring NF, small. 6mm wide, about 56mm long. 2 holes 3mm at a distance of 10mm to the axle. 1 piece. (Total length about 56mm). 2-fold bent at the ends.

Available immediately, delivery time: 1-4 days

Product number: 11436

€ 2,45 *
Switch for column control ST.80
Switch for column control ST.80
Switch for support control ST.80. This switch allows manual operation of trailer supports when support controls 10675 (12V) or 10681 (7,2V) are used. The switch can be installed at any desired location on the model. The connecting wires are connected to screw terminals on the support controls.

Available immediately, delivery time: 1-4 days

Product number: 10676

€ 5,25 *
1x clamping plates (plastic) for servo traverse. (761
1x clamping plates (plastic) for servo traverse. (761
1x clamping plates (plastic) for servo traverse. (761 according to construction plan), Wedico.

Available immediately, delivery time: 1-4 days

Product number: 5151

€ 0,95 *
Plastic storage box with lid. Dimensions: 62x40x38
Plastic storage box with lid. Dimensions: 62x40x38
Plastic storage box with lid 1x storage box, 1x lid, 2x handle, 2x hinge. PLA 3D printed. Dimensions: 62x40x38.

Available immediately, delivery time: 1-4 days

Product number: 10298

€ 13,95 *
1x riser kit UNIVERSAL. Alu. 10 flat washer plates for
1x riser kit UNIVERSAL. Alu. 10 flat washer plates for
1x riser kit UNIVERSAL. Alu. 10 flat washer plates for leaf springs. To gradually lift kit to 2 - 10mm. For A axis. Incl. 4 Linsenkopf- screw M3x25mm.

Available immediately, delivery time: 1-4 days

Product number: 8287

€ 12,00 *
%
FineLine fifth wheel grip for mounting on fifth wheel
FineLine fifth wheel grip for mounting on fifth wheel
FineLine fifth wheel handle for mounting on Tamiya standard fifth wheel coupling. Black polystyrene. 1 piece. The product photos show the item partially assembled. Only the item is offered! There are also other accessories in the photos.

Available immediately, delivery time: 1-4 days

Product number: 12712

€ 4,90 * € 5,70 * (14.04% saved)
Aluminum U-profile, 1m long, 21x7x1,5mm material thickness 1,5
Aluminum U-profile, 1m long, 21x7x1,5mm material thickness 1,5
Aluminium U-profile, 1m long 21x7x1,5mm material thickness 1,5 mm, folded and 1 FEW, dimensions correspond Tamiya profile. 1 FEW = 2 piece. Aluminum, black anodized.

No longer available

Product number: 6954

€ 29,50 *
Details
%
Trailer supports (Carson trailer) 1 pair, metal
Trailer supports (Carson trailer) 1 pair, metal
Trailer supports (Carson trailer) 1 pair, metal. Aluminum housing, steel support with guide, thumb screw for fixing, support plate total height 76-114mm. 500907375

Available immediately, delivery time: 1-4 days

Product number: 4363

€ 36,99 * € 40,99 * (9.76% saved)
%
1x leaf spring set 1: 8 (216739). 2 main springs with eyes
1x leaf spring set 1: 8 (216739). 2 main springs with eyes
1x leaf spring set 1:8 (216739). 2 main springs with eyes and 5 reinforcement springs each without eyes. 10mm wide, 1mm material thickness. Spring width: 10mmInner diameter of eye: 4,5mmMaterial thickness: 1mmDistance eye-eye: 159mm (measured center eye-center eye)Bore (each in the spring center): 3,2mm

Available immediately, delivery time: 1-4 days

Product number: 1786

€ 27,76 * € 27,90 * (0.5% saved)
1x king pin for Wedico saddle plate (professional), metal
1x king pin for Wedico saddle plate (professional), metal
1x king pin for Wedico saddle plate (professional), metal.

Available immediately, delivery time: 1-4 days

Product number: 5782

€ 6,30 *
2x aluminum U-profile, 1mtr., 21x7x1,5mm material thickness 1,
2x aluminum U-profile, 1mtr., 21x7x1,5mm material thickness 1,
2x aluminum U-profile, 1mtr., 21x7x1,5mm material thickness 1,5 mm, edged, (1 pair) dimensions according to the Tamiya Profile, 1 pair = 2 piece. Aluminum, untreated

No longer available

Product number: 4411

€ 19,50 *
Details
%
Installation kit attached drives Front Pairing Tamiya scl
Installation kit attached drives Front Pairing Tamiya scl
1x installation set for driven front axle to match Tamiya scale. 500907280. This set contains all components for mounting the front axle to the Tamiya frame. Scope of delivery: 2 stainless steel leaf spring packages, fastening material, steering servo mount (steel), steering rod.

Available immediately, delivery time: 1-4 days

Product number: 10037

€ 72,00 * € 75,99 * (5.25% saved)
1 conversion kit for Tamiya chassis air suspension. Set for 1
1 conversion kit for Tamiya chassis air suspension. Set for 1
1 air suspension conversion kit for Tamiya chassis. Set for 1 axle. No new holes need to be drilled in the frame! The set consists of:2 air cushions (rolling bellows)2 axle supports, aluminum, black anodized2 holders for longitudinal supports, aluminum, black anodized2 longitudinal supports, aluminum/brass, rotatably mountedThe upper part of the air cushions is made of aluminum (black anodized). The middle part is rubber (hollow) and adapts to the suspension. (Works without springs). The lower part is made of aluminum and presses into the rubber when loaded - like the original.The air cushion is mounted with the lower fastening screw of the frame and rear cross member (C20). The fastening eyes on the longitudinal control arms, which are used to attach to the holders, are movable and thus rotate 360 ​​degrees - an advantage for the suspension!The axle is placed in the axle support from above and screwed in. The angles for the shock absorbers and the shock absorbers are no longer required.

No longer available

Product number: 6851

€ 75,99 *
Details
%
1x aluminum saddle for semi-trailer truck.
1x aluminum saddle for semi-trailer truck.
1x aluminum saddle for semi-trailer truck. Rockinger suitable for remote-controlled unlocking (700). For Wedico models. The servo set with item number 12673 is recommended for RC operation.

Available immediately, delivery time: 1-4 days

Product number: 3458

€ 80,99 * € 98,50 * (17.78% saved)
%
Leaf springs (4 piece). Approximately 68x7mm. Tamiya. Fits
Leaf springs (4 piece). Approximately 68x7mm. Tamiya. Fits
1x leaf springs (4 pieces). Approx. 68x7mm. Tamiya. Suitable for refrigerated trailers, container trailers MAERSK, container trailers NYK. Can of course also be used for self-built models. Drilled with holes of 2x 3mm and 1x 2,5mm. Hole spacing 6mm in each case.

Available immediately, delivery time: 1-4 days

Product number: 10072

€ 7,04 * € 7,39 * (4.74% saved)
Tip
1 pair Aluminium fender for 2 axles with twin tires
1 pair Aluminium fender for 2 axles with twin tires
1 pair of aluminum fenders for 2 axles with twin tires (Tamiya scale). Total length approx. 203mm, width 55mm, height 51mm. Supplied without holder. NEW PRODUCT 2015! Aluminum, smooth. Material thickness 1mm. Supplied with protective film. Flanged on one side. Supplied without holes. We offer items 1 and 9942 as holding clamps. Both items can be used with 7415mm round material.

Available immediately, delivery time: 1-4 days

Product number: 9072

€ 27,70 *
Spring plate, plastic, black for spring set NF. For Prof
Spring plate, plastic, black for spring set NF. For Prof
Spring plate, plastic, black for spring set NF. For professional spring sets. Approximately 40x7,5mm. Intermediate layer for the leaf spring elements.

Available immediately, delivery time: 1-4 days

Product number: 11437

€ 1,17 *
Plastic storage box with lid. Dimensions: 92x40x38
Plastic storage box with lid. Dimensions: 92x40x38
Plastic storage box with lid storage box 1x, 1x lid 2x handle 2x hinge. PLA 3D printed. Dimensions: 92x40x38

Ready to ship in 14 days, delivery time 1-4 days

Product number: 10299

€ 18,94 *
Plastic storage box with lid. Dimensions: 42x40x38
Plastic storage box with lid. Dimensions: 42x40x38
Plastic storage box with lid 1x storage box, 1x lid, 1x handle, 1x hinge. PLA 3D printed. Dimensions: 42x40x38

Ready to ship in 14 days, delivery time 1-4 days

Product number: 10297

€ 9,95 *
1 pair Aluminium fender for 1 axle with twin tires
1 pair Aluminium fender for 1 axle with twin tires
1 pair of aluminum mudguards for 1 axle with twin tires (Tamiya scale). Total length approx. 100mm, width 55mm, height 55mm. Supplied without holder. NEW PRODUCT 2015! Material thickness 1mm. Supplied with protective film. Flanged on one side. Supplied without holes. We offer items 1 and 9942 as holding clamps. Both items can be used with 7415mm round material.

No longer available

Product number: 9071

€ 21,99 *
Details
1x middle layer leaf spring NF, medium. 6mm wide, approx. 66mm
1x middle layer leaf spring NF, medium. 6mm wide, approx. 66mm
1x middle position leaf spring NF, medium. 6mm wide, about 66mm long. 2 holes 3mm at a distance of 10mm to the axle. 1 piece. (Total length about 66mm). 2-fold bent at the ends.

Available immediately, delivery time: 1-4 days

Product number: 11435

€ 2,59 *
%
1 Kingpin Tamiya. For oxidized steel,
1 Kingpin Tamiya. For oxidized steel,
1 king pin Tamiya. Made of oxidized steel, with fastening screw. Diameter 11mm, height 10mm, collar diameter 6,5mm. 500907362 With screw M3x15.

Available immediately, delivery time: 1-4 days

Product number: 6618

€ 7,39 * € 7,99 * (7.51% saved)
%
1x Euro-bumper for Tamiya Container semitrailer. With
1x Euro-bumper for Tamiya Container semitrailer. With
1x Euro bumper for Tamiya container trailer. With 7-chamber taillights, buffer stops and illuminated license plate holder. (907074). Suitable for Tamiya containers, flatbeds, stakes/telescopic trailers. Our lighting boards with item numbers 3104, 3103, 3105 fit this.

Available immediately, delivery time: 1-4 days

Product number: 7878

€ 62,99 * € 79,99 * (21.25% saved)
Servonaut SandMaster Riser Kit for Arocs 3348 + 10mm
Servonaut SandMaster Riser Kit for Arocs 3348 + 10mm
SandMaster lift kit for Tamiya Mercedes-Benz Arocs 3348. Lift by 10mm. A cardan shaft with length compensation is required. SandMaster lift kit for Arocs 3348 main frame from Tamiya, increase +10mm, scale 1:14. When using this increase, cardan shafts with length compensation are required (not included). Also suitable for other Tamiya frames, but additional holes in the frame may then be necessary.

Available immediately, delivery time: 1-4 days

Product number: 11213

€ 29,89 *
Fender holder (4 pieces) for ONE fender. MS cast
Fender holder (4 pieces) for ONE fender. MS cast
1 set of fender brackets (4 pieces) for ONE fender. 3mm round material or tube is suitable as a support rod (not included!). Cast brass. Universal fender bracket suitable for all fenders! 2 retaining clips each hold a 3mm round material. The retaining clips are screwed to the fender with 1,6mm screws (eg item 6490) and nuts (eg item 2579).Scope of delivery:4 retaining clips on the cast brass branch

Available immediately, delivery time: 1-4 days

Product number: 12193

€ 5,00 *
Traverse2 for Senior frames, aluminum, (752 loud Plan)
Traverse2 for Senior frames, aluminum, (752 loud Plan)
Traverse2 for Senior frames, aluminum, (752 loud Plan)

Ready to ship in 5 days, delivery time 1-4 days

Product number: 5147

€ 16,10 *