Black Week 2024 is underway! Look forward to great offers!

Go to home page
€ 0,00 *
Filter
%
1x Euro-bumper for Tamiya Container semitrailer. With
1x Euro-bumper for Tamiya Container semitrailer. With
1x Euro bumper for Tamiya container trailer. With 7-chamber taillights, buffer stops and illuminated license plate holder. (907074). Suitable for Tamiya containers, flatbeds, stakes/telescopic trailers. Our lighting boards with item numbers 3104, 3103, 3105 fit this.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 7878

€ 62,99 * € 79,99 * (21.25% saved)
%
1 bumper for trailer, Tamiya scale. Aluminium, milled
1 bumper for trailer, Tamiya scale. Aluminium, milled
1 bumper for trailer, Tamiya scale. Aluminum, milled. Suitable for frame width 96mm. (500907361) Suitable 7-chamber tail lights item number 1905. Suitable license plate plate item numbers 1904, 6436.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 6524

€ 23,99 * € 24,99 * (4% saved)
1x rear bumper, sheet steel 0,8mm for 1 sentence
1x rear bumper, sheet steel 0,8mm for 1 sentence
1x rear bumper, 0,8mm sheet steel for 1 set of 7-chamber tail lights. Width 185mm (Tamiya size). Multi-edged rear bumper made of 0,8mm sheet steel, bare. Width 185mmTotal height 41mmTotal depth 12mmSuitable 7-chamber tail lights: Item 1905Suitable license plate holders: Item 1904, 9092, 6436Suitable lighting boards: Item 3103, 3104, 3105All holes for fastening screws and cable feedthroughs are already included.

Available immediately, delivery time: 1-4 days

Product number: 9268

€ 14,60 *
%
FineLine rear bumper for Tamiya 3-axle models
FineLine rear bumper for Tamiya 3-axle models
FineLine rear bumper for Tamiya 3-axle models included accessories8x 2 chamber tail light 3D print3x 1 chamber tail light 3D print8x glass set (3) transparent laser engraved11x glass set (3) red laser engraved38x Phillips screw M14x Phillips screw M34x M3 nut4x 3x3mm triangular profile strip 90°1x etched handle part2x etched hinge part8x neodymium magnets 2x1mmAssembly instructionsThis is a kit with illustrated instructions.In the product photos, the article is shown partially assembled and illuminated.The license plate and the license plate lighting are not part of the setThe article is shown partially assembled on a chassis which is not part of the scope of delivery!

Available immediately, delivery time: 1-4 days

Product number: 12668

€ 124,90 * € 129,00 * (3.18% saved)
1x rear bumper, sheet steel 0,8mm for 1 sentence
1x rear bumper, sheet steel 0,8mm for 1 sentence
1x rear bumper, sheet steel 0,8mm for 1 set of 7-chamber tail lights. BLACK. Width 185mm (Tamiya size). Multi-edged rear bumper made of 0,8mm sheet steel, BLACK powder-coated! Width 185mmTotal height 41mmTotal depth 12mmSuitable 7-chamber tail lights: Item 1905Suitable license plate holders: Item 1904, 9092, 6436Suitable lighting boards: Item 3103, 3104, 3105All holes for fastening screws and cable feedthroughs are already included.

No longer available

Product number: 9282

€ 16,30 *
Details
1x rear bumper, sheet steel 0,8mm for 1 sentence
1x rear bumper, sheet steel 0,8mm for 1 sentence
1x rear bumper, sheet steel 0,8mm for 1 set of 7-chamber tail lights. WHITE. Width 185mm (Tamiya size). Multi-edged rear bumper made of 0,8mm sheet steel, powder-coated WHITE! Width 185mmTotal height 41mmTotal depth 12mmSuitable 7-chamber tail lights: Item 1905Suitable license plate holders: Item 1904, 9092, 6436Suitable lighting boards: Item 3103, 3104, 3105All holes for fastening screws and cable feedthroughs are already included.

Available immediately, delivery time: 1-4 days

Product number: 9281

€ 16,30 *
1x rear bumper, sheet steel 0,8mm f. 2 rates
1x rear bumper, sheet steel 0,8mm f. 2 rates
1x rear bumper, sheet steel 0,8mm for 2 sets of 7-chamber tail lights. WHITE. Width 185mm (Tamiya size). Multi-edged rear bumper made of 0,8mm sheet steel, powder-coated WHITE. Width 185mmTotal height 48mmTotal depth 12mmSuitable 7-chamber tail lights: 2x item 1905Suitable license plate holders: items 1904, 9092, 6436Suitable lighting boards: 2x each of items 3103, 3104, 3105All holes for fastening screws and cable feedthroughs are already included.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9283

€ 16,30 *
1x rear bumper, sheet steel 0,8mm for 2 rates
1x rear bumper, sheet steel 0,8mm for 2 rates
1x rear bumper, 0,8mm sheet steel for 2 sets of 7-chamber tail lights. Width 185mm (Tamiya size). Multi-edged rear bumper made of 0,8mm sheet steel, bare. Width 185mmTotal height 48mmTotal depth 12mmSuitable 7-chamber tail lights: 2x item 1905Suitable license plate holders: items 1904, 9092, 6436Suitable lighting boards: 2x each of items 3103, 3104, 3105All holes for fastening screws and cable feedthroughs are already included.

Available immediately, delivery time: 1-4 days

Product number: 9269

€ 13,60 *
1x rear bumper, sheet steel 0,8mm f. 2 rates
1x rear bumper, sheet steel 0,8mm f. 2 rates
1x rear bumper, sheet steel 0,8mm for 2 sets of 7-chamber tail lights. BLACK. Width 185mm (Tamiya size). Multi-edged rear bumper made of 0,8mm sheet steel, BLACK powder-coated. Width 185mmTotal height 48mmTotal depth 12mmSuitable 7-chamber tail lights: 2x item 1905Suitable license plate holders: items 1904, 9092, 6436Suitable lighting boards: 2x each of items 3103, 3104, 3105All holes for fastening screws and cable feedthroughs are already included.

No longer available

Product number: 9284

€ 16,30 *
Details
%
FineLine rear bumper Scania S770 SLT and others
FineLine rear bumper Scania S770 SLT and others
FineLine rear bumper for Tamiya Scania 770 SLT and other 3-axle models. Kit including assembly instructions. The product photos show the item partially assembled. Only the item is offered! There are also other accessories in the photos.

Available immediately, delivery time: 1-4 days

Product number: 12952

€ 89,00 * € 99,00 * (10.1% saved)
%
1 shock-rod for trailers, Tamiya scale. Alu milled,
1 shock-rod for trailers, Tamiya scale. Alu milled,
1 bumper for semi-trailer, Tamiya scale. Aluminum, milled. Suitable for frame width 96mm. With underrun protection for 3-chamber tail lights. 500907371. Bumper milled, aluminum. Prepared for the use of 3 sets of 3-chamber tail lights (item 3240), license plate holder (item 1904 or 6436) and the 1-chamber tail lights (item 3557 and 3558)! Total height 40mm.

Available immediately, delivery time: 1-4 days

Product number: 7254

€ 23,99 * € 24,99 * (4% saved)
Complete bumper 185mm with 3-chamber taillights
Complete bumper 185mm with 3-chamber taillights
Complete bumper 185mm with 3-chamber tail lights. TAM size. Black powder-coated. For trailers/semi-trailers. Made from 1mm sheet steel. 16mm high. Scope of delivery:1x bumper 185mm wide, black powder-coated4x 3-chamber tail lights 11mm diameter. (2x item 3240).1x 1-chamber tail light 11mm diameter, clear. (item 3557).1x 1-chamber tail light 11mm diameter, red. (item 3558).

Ready to ship in 5 days, delivery time 1-4 days

Product number: 5993

€ 52,00 *
%
FineLine rear bumper for Tamiya trailer
FineLine rear bumper for Tamiya trailer
FineLine rear bumper for Tamiya Scania, Volvo & Actros trailer with a frame length of 615mm included accessories8x 2 chamber tail light 3D print8x 1 chamber tail light 3D print12x glass set (3) transparent laser engraved12x glass set (3) red laser engraved48x Phillips screw M12x 3x3mm triangular profile strip 90°Assembly instructionsThis is a kit with illustrated instructions.In the product photos, the article is shown partially assembled and illuminated.The article is shown partially mounted on a chassis which is not part of the scope of delivery!

Available immediately, delivery time: 1-4 days

Product number: 12779

€ 134,90 * € 139,00 * (2.95% saved)
Bumper 185mm th for 3-chamber tail lights. TAM-size
Bumper 185mm th for 3-chamber tail lights. TAM-size
Bumper 185mm for 3-chamber tail lights. TAM size. Black powder-coated. Height 16mm. For trailers/semi-trailers. Made from 1mm sheet steel.

Available immediately, delivery time: 1-4 days

Product number: 5775

€ 13,49 *
Bumper 185mm th for 3-chamber tail lights. TAM-size
Bumper 185mm th for 3-chamber tail lights. TAM-size
Bumper 185mm th for 3-chamber tail lights. TAM-size. White powder-coated height 16mm. For trailer / semitrailer. Edging 1mm steel.

Available immediately, delivery time: 1-4 days

Product number: 5848

€ 12,90 *
Complete bumper 185mm with 3-chamber taillights
Complete bumper 185mm with 3-chamber taillights
Complete bumper 185mm with 3-chamber tail lights. TAM size. White powder-coated. For trailers/semi-trailers. Made from 1mm sheet steel. 16mm high. Scope of delivery:1x bumper 185mm wide, white powder-coated4x 3-chamber tail lights 11mm diameter1x 1-chamber tail light 11mm diameter, clear1x 1-chamber tail light 11mm diameter, red

Ready to ship in 5 days, delivery time 1-4 days

Product number: 5992

€ 54,25 *
%
FineLine rear bumper for Tamiya 3-axle models
FineLine rear bumper for Tamiya 3-axle models
FineLine rear bumper for Tamiya 2 & 3-axle models This is a kit with illustrated instructions. The product photos show the item partially assembled. Only the item is offered! There are also other accessories in the photos.

Available immediately, delivery time: 1-4 days

Product number: 13290

€ 119,90 * € 124,90 * (4% saved)
%
FineLine rear bumper for Tamiya models for Verkerk 8 RLR
FineLine rear bumper for Tamiya models for Verkerk 8 RLR
FineLine rear bumper for Tamiya 2 & 3-axle models for 8x Verkerk RLR taillights. Please note that the Verkerk RLR are not included and must be purchased separately! This is a kit with illustrated instructions. The product photos show the item partially assembled. Only the item is offered! There are also other accessories in the photos.

Available immediately, delivery time: 1-4 days

Product number: 13289

€ 44,90 * € 49,00 * (8.37% saved)
%
FineLine Danish box for Scania 770 S long-hood truck No 13
FineLine Danish box for Scania 770 S long-hood truck No 13
FineLine Danish box for Scania 770 S 3-axle No. 13 with sidebar. Illuminated pair left & right. For Torpedo long-hood conversion. This is a kit with illustrated instructions. The product photos show the item partially assembled. Only the item is offered!

Available immediately, delivery time: 1-4 days

Product number: 13288

€ 105,90 * € 120,00 * (11.75% saved)
%
FineLine rear bumper for Tamiya models with aluminum sleeves
FineLine rear bumper for Tamiya models with aluminum sleeves
FineLine rear bumper for Tamiya 2 & 3-axle models with aluminum sleeves. No LEDs are included. Rear hole 1,5mm. SMDs, 1,8mm or 3mm LEDs can be used. Please ensure that the legs are insulated. This is a kit with illustrated instructions. The product photos show the item partially assembled. Only the item is offered! There are also other accessories in the photos.

Available immediately, delivery time: 1-4 days

Product number: 13287

€ 74,90 * € 79,00 * (5.19% saved)