Go to home page
€ 0,00 *
Filter
Sleeve 4x0,5x7mm, nickel-plated, 1 piece
Sleeve 4x0,5x7mm, nickel-plated, 1 piece
1 sleeve 4x0,5x7mm, nickel-plated.

Available immediately, delivery time: 1-4 days

Product number: 6634

€ 0,70 *
1x lower layer leaf spring (short). 6mm wide, about 56mm long
1x lower layer leaf spring (short). 6mm wide, about 56mm long
1x lower layer leaf spring (short). 6mm wide, approx. 56mm long. 2 holes 3mm at a distance of 10mm from the axle mount. 1 piece. This type of spring is used in Wedico chassis as the lower layer of the AF spring sets (old chassis).

Available immediately, delivery time: 1-4 days

Product number: 6647

€ 1,34 *
1x middle layer leaf spring (middle). 6mm wide, about 69mm
1x middle layer leaf spring (middle). 6mm wide, about 69mm
1x middle layer leaf spring (medium). 6mm wide, approx. 69mm long. 2 holes 3mm at a distance of 10mm from the axle mount. 1 piece. This type of spring is used in Wedico chassis as the middle layer of the AF spring sets (old chassis).

Available immediately, delivery time: 1-4 days

Product number: 7381

€ 1,59 *
topsheet leaf spring (long 70mm). 6mm wide, about 70mm
topsheet leaf spring (long 70mm). 6mm wide, about 70mm
1x upper layer leaf spring (long, 70mm). 6mm wide, approx. 70mm long. 2 holes 3mm at a distance of 10mm from the axle mount. 1 piece. (Total length 75mm). Used on Wedico low loaders. This type of spring is used on Wedico low loaders as the main spring of the AF spring sets (old chassis). This spring layer is slightly shorter than the main spring of the standard AF spring sets.

Available immediately, delivery time: 1-4 days

Product number: 7382

€ 2,89 *
%
Stainless steel spring for standard chassis (455)
Stainless steel spring for standard chassis (455)
Stainless steel spring sets for standard chassis (455). Spring width 6mm. Spring eye distance, unloaded 80mm. 2 main springs and 2 reinforcement springs each. Incl. screws, nuts, washers and tubes. 2 spring holes (for axle attachment) 3,2mm, distance 10mm. Height of main spring in unloaded state (to the center of the eyes): 13mm.

Available immediately, delivery time: 1-4 days

Product number: 4013

€ 12,50 * € 12,95 * (3.47% saved)
Leaf spring set -ScaleDRIVE-
Leaf spring set -ScaleDRIVE-
1x leaf spring set, kit, ScaleDRIVE fits the Tamiya chassis, as front axle suspension, material: plastic and titanium bronze, fits Tamiya and Scaledrive chassis. The eye distance of the main spring is 99mm.

Available immediately, delivery time: 1-4 days

Product number: 9619

€ 41,50 *
1x upper layer leaf spring (long). 6mm wide, about 85mm long. 2
1x upper layer leaf spring (long). 6mm wide, about 85mm long. 2
1x upper layer leaf spring (long). 6mm wide, approx. 85mm long. 2 holes 3mm at a distance of 10mm from the axle mount. For standard spring package Wedico. 1 piece. (Spring 1 part 32). This type of spring is used in Wedico chassis as the upper layer of the AF spring sets (old chassis). This part is part of the standard spring package from Wedico. It does NOT fit Wedico low loaders! The mounting eye distance is approx. 79mm.

Available immediately, delivery time: 1-4 days

Product number: 9295

€ 2,84 *
1 collar sleeve for suspension. Plastic. eg for
1 collar sleeve for suspension. Plastic. eg for
1 collar sleeve for suspension. Plastic. eg for professional Federnsätze. Black.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 6642

€ 1,89 *
1x upper layer leaf spring NF, large. 6mm wide, about 83mm long.
1x upper layer leaf spring NF, large. 6mm wide, about 83mm long.
1x upper layer leaf spring NF, large. 6mm wide, about 83mm long. 2 holes 3mm at a distance of 10mm to the axle. 1 piece. (Total length about 83mm). Suspension hole distance approx. 78mm

Available immediately, delivery time: 1-4 days

Product number: 11434

€ 3,32 *
%
Spring set NF for professional frame NF (702)
Spring set NF for professional frame NF (702)
Spring Set NF for Senior frame NF (702). Spring width 6mm. Hole spacing axis: 10mm eye relief: 77mm.

Available immediately, delivery time: 1-4 days

Product number: 3371

€ 22,21 * € 24,95 * (10.98% saved)
%
CARSON Riser Kit for 3Achs Tamiya Tractors + 8mm
CARSON Riser Kit for 3Achs Tamiya Tractors + 8mm
CARSON lift kit for all Tamiya 3-axle tractors. Also fits Arocs 3348. Compatible with Tamiya axles and Carson self-locking axles. +8mm lift.

Available immediately, delivery time: 1-4 days

Product number: 11223

€ 37,98 * € 42,99 * (11.65% saved)
%
1x leaf spring set with bushes. 2 main springs, 2
1x leaf spring set with bushes. 2 main springs, 2
1x leaf spring set with bushings. 2 main springs, 2 reinforcement springs, 4 bushings. (2124). 2 axle mounting holes 3mm, hole spacing 10mm, spring width 6mm, total length of main spring 86mm, mounting spacing approx. 80mm

Available immediately, delivery time: 1-4 days

Product number: 1912

€ 13,52 * € 14,90 * (9.26% saved)
%
Leaf spring set (short) with sockets LOA 71mm
Leaf spring set (short) with sockets LOA 71mm
Leaf spring set (short) with bushings, overall length 71mm. Bushing bore 3mm. Bore spacing 60-65 mm. (220969).

Available immediately, delivery time: 1-4 days

Product number: 2620

€ 13,52 * € 13,90 * (2.73% saved)
1x lower layer leaf spring NF, small. 6mm wide, about 56mm lan
1x lower layer leaf spring NF, small. 6mm wide, about 56mm lan
1x lower layer leaf spring NF, small. 6mm wide, about 56mm long. 2 holes 3mm at a distance of 10mm to the axle. 1 piece. (Total length about 56mm). 2-fold bent at the ends.

Available immediately, delivery time: 1-4 days

Product number: 11436

€ 2,45 *
1x riser kit UNIVERSAL. Alu. 10 flat washer plates for
1x riser kit UNIVERSAL. Alu. 10 flat washer plates for
1x riser kit UNIVERSAL. Alu. 10 flat washer plates for leaf springs. To gradually lift kit to 2 - 10mm. For A axis. Incl. 4 Linsenkopf- screw M3x25mm.

Available immediately, delivery time: 1-4 days

Product number: 8287

€ 12,00 *
%
1x leaf spring set 1: 8 (216739). 2 main springs with eyes
1x leaf spring set 1: 8 (216739). 2 main springs with eyes
1x leaf spring set 1:8 (216739). 2 main springs with eyes and 5 reinforcement springs each without eyes. 10mm wide, 1mm material thickness. Spring width: 10mmInner diameter of eye: 4,5mmMaterial thickness: 1mmDistance eye-eye: 159mm (measured center eye-center eye)Bore (each in the spring center): 3,2mm

Available immediately, delivery time: 1-4 days

Product number: 1786

€ 27,76 * € 27,90 * (0.5% saved)
%
Installation kit attached drives Front Pairing Tamiya scl
Installation kit attached drives Front Pairing Tamiya scl
1x installation set for driven front axle to match Tamiya scale. 500907280. This set contains all components for mounting the front axle to the Tamiya frame. Scope of delivery: 2 stainless steel leaf spring packages, fastening material, steering servo mount (steel), steering rod.

Available immediately, delivery time: 1-4 days

Product number: 10037

€ 72,00 * € 75,99 * (5.25% saved)
1 conversion kit for Tamiya chassis air suspension. Set for 1
1 conversion kit for Tamiya chassis air suspension. Set for 1
1 air suspension conversion kit for Tamiya chassis. Set for 1 axle. No new holes need to be drilled in the frame! The set consists of:2 air cushions (rolling bellows)2 axle supports, aluminum, black anodized2 holders for longitudinal supports, aluminum, black anodized2 longitudinal supports, aluminum/brass, rotatably mountedThe upper part of the air cushions is made of aluminum (black anodized). The middle part is rubber (hollow) and adapts to the suspension. (Works without springs). The lower part is made of aluminum and presses into the rubber when loaded - like the original.The air cushion is mounted with the lower fastening screw of the frame and rear cross member (C20). The fastening eyes on the longitudinal control arms, which are used to attach to the holders, are movable and thus rotate 360 ​​degrees - an advantage for the suspension!The axle is placed in the axle support from above and screwed in. The angles for the shock absorbers and the shock absorbers are no longer required.

No longer available

Product number: 6851

€ 75,99 *
Details
%
Leaf springs (4 piece). Approximately 68x7mm. Tamiya. Fits
Leaf springs (4 piece). Approximately 68x7mm. Tamiya. Fits
1x leaf springs (4 pieces). Approx. 68x7mm. Tamiya. Suitable for refrigerated trailers, container trailers MAERSK, container trailers NYK. Can of course also be used for self-built models. Drilled with holes of 2x 3mm and 1x 2,5mm. Hole spacing 6mm in each case.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 10072

€ 7,04 * € 7,39 * (4.74% saved)
Spring plate, plastic, black for spring set NF. For Prof
Spring plate, plastic, black for spring set NF. For Prof
Spring plate, plastic, black for spring set NF. For professional spring sets. Approximately 40x7,5mm. Intermediate layer for the leaf spring elements.

Available immediately, delivery time: 1-4 days

Product number: 11437

€ 1,17 *
1x middle layer leaf spring NF, medium. 6mm wide, approx. 66mm
1x middle layer leaf spring NF, medium. 6mm wide, approx. 66mm
1x middle position leaf spring NF, medium. 6mm wide, about 66mm long. 2 holes 3mm at a distance of 10mm to the axle. 1 piece. (Total length about 66mm). 2-fold bent at the ends.

Available immediately, delivery time: 1-4 days

Product number: 11435

€ 2,59 *
Servonaut SandMaster Riser Kit for Arocs 3348 + 10mm
Servonaut SandMaster Riser Kit for Arocs 3348 + 10mm
SandMaster lift kit for Tamiya Mercedes-Benz Arocs 3348. Lift by 10mm. A cardan shaft with length compensation is required. SandMaster lift kit for Arocs 3348 main frame from Tamiya, increase +10mm, scale 1:14. When using this increase, cardan shafts with length compensation are required (not included). Also suitable for other Tamiya frames, but additional holes in the frame may then be necessary.

Available immediately, delivery time: 1-4 days

Product number: 11213

€ 29,89 *
%
1 set Truck oil pressure damper. Tamiya. Kit 2 piece
1 set Truck oil pressure damper. Tamiya. Kit 2 piece
1 set Truck oil pressure damper. Tamiya. Black. Kit 2 shock-absorber. With damper oil.

Available immediately, delivery time: 1-4 days

Product number: 9723

€ 31,99 * € 37,49 * (14.67% saved)
%
1 set Spring Perch 5mm, black, plastic,
1 set Spring Perch 5mm, black, plastic,
1 set Spring Perch 5mm, black, plastic, (220968).

Ready to ship in 5 days, delivery time 1-4 days

Product number: 2621

€ 6,85 * € 6,95 * (1.44% saved)
1 cap for spring hinge, plastic, black. For
1 cap for spring hinge, plastic, black. For
1 cap for spring hinge, plastic, black. For professional Federnsätze.

Available immediately, delivery time: 1-4 days

Product number: 6641

€ 1,93 *
%
Leaf spring connectors 1: 16 / 1: 14,5. Delivery: 1 couple
Leaf spring connectors 1: 16 / 1: 14,5. Delivery: 1 couple
Leaf spring connector 1:16/1:14,5. Scope of delivery: 1 pair. (207009). Instructions can be downloaded here.

Available immediately, delivery time: 1-4 days

Product number: 2014

€ 30,23 * € 32,90 * (8.12% saved)
1 spring hinge, plastic, black. For Senior Federnsätze
1 spring hinge, plastic, black. For Senior Federnsätze
1 spring hinge, plastic, black. For professional Federnsätze. (Wedico).

Available immediately, delivery time: 1-4 days

Product number: 6640

€ 2,40 *
1 penholder, small, plastic, black. For
1 penholder, small, plastic, black. For
1 penholder, small, plastic, black. For professional Federnsätze. (25808).

Available immediately, delivery time: 1-4 days

Product number: 9086

€ 2,80 *
%
Elevation Set (1: 14). Fits all 2-axis ZM
Elevation Set (1: 14). Fits all 2-axis ZM
Lifting set (1:14). Suitable for all 2-axle Euro tractors. This set is suitable for the axles included in the original kit, as well as the self-locking axles. Lifting set suitable for all 2-axle Euro tractors. This set is suitable for the axles included in the kit, as well as for the Carson drive concept (self-locking axles). The off-road capability of the model is increased by 8 mm.Scope of delivery: 1 set

Available immediately, delivery time: 1-4 days

Product number: 11680

€ 33,99 * € 34,99 * (2.86% saved)
Adapter for front axles for org. Tamiya spring assembly
Adapter for front axles for org. Tamiya spring assembly
Set Adapter for front axles. Accessories for Scale Drive Axle. either in original frame height or lift kit, fits all Tamiya 2- and 3-axle chassis, plastic.

Available immediately, delivery time: 1-4 days

Product number: 9624

€ 15,90 *
%
Leaf springs (4 piece). Approximately 49x7mm. Tamiya. Fits
Leaf springs (4 piece). Approximately 49x7mm. Tamiya. Fits
1x leaf springs (4 pieces). Approx. 49x7mm. Tamiya. Suitable for refrigerated trailers, container trailers MAERSK, container trailers NYK. Can of course also be used for self-built models. Drilled with holes of 2x 3mm and 1x 2,5mm. Material thickness 0,6mm. Hole spacing 6mm each.

Available immediately, delivery time: 1-4 days

Product number: 10073

€ 4,80 * € 6,79 * (29.31% saved)
1 penholder, big, black plastic. For
1 penholder, big, black plastic. For
1 pen holder, large, plastic, black. For professional pen sets. (25790).

Available immediately, delivery time: 1-4 days

Product number: 9085

€ 3,44 *
%
1x leaf spring reinforcement 1:8 (220272) suitable for
1x leaf spring reinforcement 1:8 (220272) suitable for
1x leaf spring reinforcement 1:8 (220272) suitable for leaf spring set 1:8.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 6388

€ 18,86 * € 19,90 * (5.23% saved)
SandMaster lift kit for Tamiya Mercedes-Benz Arocs
SandMaster lift kit for Tamiya Mercedes-Benz Arocs
SandMaster lift kit for Tamiya Mercedes-Benz Arocs 4151. Raises the vehicle by 10mm. Cardan shafts with length compensation are required! Mount adapter plates on the frame and attach the axles to them. The rear axle pendulum from Tamiya is raised by 10mm with the new rear axle mounts! The installation (use) of the shock absorbers is no longer possible. Cardan shafts with length compensation must be used.

Available immediately, delivery time: 1-4 days

Product number: 12308

€ 35,30 *
1x spring package front axle Oßwald FB001. For driven
1x spring package front axle Oßwald FB001. For driven
1x springs Front Oßwald FB001. Suitable for driven and non-driven axles. Delivered, the spring assembly with suspension and small parts. Axle and frame parts are not supplied!

No longer available

Product number: 5170

€ 50,00 *
Details
1x spring package front axle Oßwald FB005. Spring package
1x spring package front axle Oßwald FB005. Spring package
1x spring package front axle Oßwald FB005. Spring package (leaf springs), raised, suitable for driven and non-driven axles. The spring package is supplied with suspension and small parts. Axle and frame parts are not included in the scope of delivery! Leaf spring width: 6mm Length of the leaf springs: 92mm (hole center), 90mm, 80mm, 69mm, 59mm, 48mm.

No longer available

Product number: 6942

€ 50,00 *
Details
Spring packing for one axis AF 70mm.
Spring packing for one axis AF 70mm.
Spring packing for one axis AF 70mm.

Available immediately, delivery time: 1-4 days

Product number: 11052

€ 24,99 *
Leaf spring rear axle (2 pieces). For Tamiya rear axle.
Leaf spring rear axle (2 pieces). For Tamiya rear axle.
Leaf spring rear axle (2 pieces). For Tamiya rear axle. 309805522. Width: 7mm. Total length: 109mm. Eye-centre distance: 103mm.

Available immediately, delivery time: 1-4 days

Product number: 12307

€ 26,99 *
1x leaf spring bag. 56319. For refrigerated trailers from Tamiya.
1x leaf spring bag. 56319. For refrigerated trailers from Tamiya.
1x leaf spring bag. 56319. For Tamiya refrigerated trailers. 309400704. The bag contains: Long leaf spring 6 pieces Medium leaf spring 6 pieces Short leaf spring 6 pieces Damper cylinder 6 pieces Threaded rods and loading door rods Rear door hinges 4 pieces Release spring, retaining spring Suspension strut A and B, 4 pieces each  

Ready to ship in 5 days, delivery time 1-4 days

Product number: 8850

€ 41,39 *
%
1:14 suspension 9mm higher for driven axle
1:14 suspension 9mm higher for driven axle
Suspension for one axle raised by 9mm. Spring pack mount 10mm, axle mounting: 13mm and 8mm width. 2 spring packs with aluminum frame holder and mounting screws

Ready to ship in 5 days, delivery time 1-4 days

Product number: 12697

€ 64,90 * € 69,95 * (7.22% saved)
%
1:14 Suspension for driven front axle pair
1:14 Suspension for driven front axle pair
1:14 suspension for driven front axle pair thicon-models 1:14 suspension for driven front axle pair thicon-models

Available immediately, delivery time: 1-4 days

Product number: 13032

€ 64,90 * € 69,95 * (7.22% saved)
%
1:14 axle suspension 'air suspension' for one axle
1:14 axle suspension 'air suspension' for one axle
1:14 axle suspension 'air suspension' for one axle thicon-models 1:14 axle suspension 'air suspension' for one axle thicon-models

Available immediately, delivery time: 1-4 days

Product number: 13033

€ 139,00 * € 149,00 * (6.71% saved)