Semi-props

Trailer support pair (Carson FLIEGL trough trailer)

1 pair of trailer supports (Carson FLIEGL dump trailer) 1 pair, metal. Aluminum housing, steel support with guide, INCLUDING 2 MOTORS, support plate. Total height 76-114mm. (907218). This set contains the supports suitable for the Fliegl trailer (item 8537) and 2 matching motors (item 8538). The motors are designed for operation with 7,2V. This set fits almost all Carson trailer chassis (except Goldhofer trailers).

Ready to ship in 5 days, delivery time 1-4 days

Product number: 8890

€ 175,00 * € 199,98 * (12.49% saved)

Subscriptions

1x electric trailer supports Tamiya. Complete

1x electric trailer supports Tamiya. Complete set (kit) for electrically powered trailer supports suitable for all Tamiya trailers. 300056505. The extension and retraction is operated together with the servo-operated fifth wheel coupling (included in the kit - but not the servo (this must be purchased separately)). The coupling and uncoupling operation is therefore controlled from the tractor unit. The supports can also be manually extended and retracted using the emergency switch that is operated by hand.Fifth wheel plates with the option of servo operation are available as items 11198 (plastic) and 9218 (aluminum).The limit switches are available as spare parts as item 12138.

Available immediately, delivery time: 1-4 days

Product number: 7736

€ 84,20 * € 115,00 * (26.78% saved)

Subscriptions

Stem control ST.80 (1,5A). For 7,2V.

Support control ST.80 (1,5A). For 7,2V. This support control (7,2V version) can be used for all electrically operated trailer supports or ramps. Item 10676 is available as an option - this allows the supports or ramps to be operated manually. Up to 2 end position switches (1 end position switch for each end position) can be connected to the support control. This protects each support from mechanical overload when reaching the end position(s). End position buttons or switches such as our items: 6343, 6344, 7140, 7198, 9643 are preferably suitable for end position detection. These items are NOT included in the scope of delivery of the support control! The support control is supplied with illustrated installation instructions and allows simple and clean wiring on the model.

Available immediately, delivery time: 1-4 days

Product number: 10681

€ 14,99 *

Subscriptions

1 geared motor for driving Fliegl trailer supports

1 gear motor for driving Fliegl trailer supports (item 8537). 2 motors are required for one pair of supports! For 7,2V operation. (907199). In order to be able to operate the supports of the Fliegl trailer electrically, 2 of this motor are required! (Pair of supports: item 8537). Under item number 8890 you will find a complete set (with a price advantage!) consisting of supports and support motors! Technical data: Overall length: 32,8mm Length without shaft: 26,6mm Max. Diameter (motor): 13,5mmShaft diameter: 3mm with one-sided flatteningNominal voltage: 7,4V DCWorking voltage: 6,0 - 8,0V DCIdle speed: 130 rpmSpeed in continuous operation: 100 rpmContinuous current: 0,8AContinuous torque: 20mNmPeak torque: 75mNmReduction ratio: 100:1Weight: 12gr.

Available immediately, delivery time: 1-4 days

Product number: 8538

€ 33,36 * € 34,99 * (4.66% saved)

Subscriptions

Switch for column control ST.80

Switch for support control ST.80. This switch allows manual operation of trailer supports when support controls 10675 (12V) or 10681 (7,2V) are used. The switch can be installed at any desired location on the model. The connecting wires are connected to screw terminals on the support controls.

Available immediately, delivery time: 1-4 days

Product number: 10676

€ 5,25 *

Subscriptions

Trailer supports (Carson trailer) 1 pair, metal

Trailer supports (Carson trailer) 1 pair, metal. Aluminum housing, steel support with guide, thumb screw for fixing, support plate total height 76-114mm. 500907375

Available immediately, delivery time: 1-4 days

Product number: 4363

€ 36,99 * € 40,99 * (9.76% saved)

Subscriptions

Semi support HUB 2005 for Carson trailer. 7,2V

1x trailer support HUB 2005 for Carson trailer. NOT for GOLDHOFER. For operating voltage 7,2V. Trailer support suitable for the usual Carson frame dimensions. Attention: Trailer support does not fit the Carson Goldhofer trailer II (semi-trailer BAU STN-L3). The trailer support can lift a guaranteed maximum weight of 15kg. A higher weight is possible - but this can damage the mechanics! In most cases the weight is divided between the axles and the trailer support, so that a load with a significantly higher weight than 15kg is possible. Color: Painted in matt black. Other colors possible for an additional charge. Special features: Housing and racks are made of brass. Motor and gearbox from Faulhaber are splash-proof. Suitable for Tamiya models. Technical data: -Width: 96 mm (frame width) -Height retracted: 92 mm -Height extended: 130 mm (1st tooth of the rack) -Rack: 8 mm x 8 mm -Weight: 260g -Operating voltage: 7,2 (if 12V is required, note in the checkout process) Does not fit the Carson Fliegl rear tipper! For this trailer support you can find 2 support controls here: Article 10675 (for 12V operation) Article 10681 (for 7,2V operation) Article 10676 (manual switch) These items are NOT included in the scope of delivery of the support! The support control allows for simple and clean wiring.

No longer available

Product number: 9992

€ 269,00 *

Subscriptions

Details

1 pair of trailer supports (Carson FLIEGL dump trailer)

1 pair of trailer supports (Carson FLIEGL dump trailer) 1 pair, metal. Aluminum housing, steel support with guide, intended for motor drive, support plate. Total height 76-114mm. (907218). To operate the supports electrically, 2 drive motors item 8538 are required (not included!). Under item number 8890 you will find a complete set (with a price advantage!), consisting of supports and support motors! This pair of supports is suitable for: 8472 : Fliegl-Stonemaster-Rundmulde7256: Semitrailer chassis10322: 2-axle rear tipper7472: 3-axle flatbed trailer7471: 3-axle stake trailer7470: 3-axle box trailer

Available immediately, delivery time: 1-4 days

Product number: 8537

€ 119,00 * € 130,00 * (8.46% saved)

Subscriptions

Stem control ST.80 (1,5A). For 12V.

Support control ST.80 (1,5A). For 12V. This support control (12V version) can be used for all electrically operated trailer supports or ramps. The item 10676 is available as an option - this allows the manual operation of the supports or ramps. Up to 2 end position switches (1 end position switch for each end position) can be connected to the support control. This protects each support from mechanical overload when reaching the end position(s). End position buttons or switches such as our items: 6343, 6344, 7140, 7198, 9643 are preferably suitable for end position detection. These items are NOT included in the scope of delivery of the support control! The support control is supplied with illustrated installation instructions and allows simple and clean wiring on the model.

Available immediately, delivery time: 1-4 days

Product number: 10675

€ 14,99 *

Subscriptions

Trailer support for Carson Fliegl Stone Master semi-trailer

1x trailer support for Carson Stone Master trailer. For operating voltage 7,2V. Trailer support suitable for the Carson Stone Master trailer. (Semi-trailer), article 8472 (not included). It is attached to the frame with the screws provided. The trailer support can lift a guaranteed maximum weight of 15kg. A higher weight is possible - but this can damage the mechanics! In most cases the weight is divided between the axles and the trailer support, so that a load with a significantly higher weight than 15kg is possible. Color: Painted in matt black. Other colors possible for an additional charge. Special features: Housing and racks are made of brass. Motor and gearbox from Faulhaber are splash-proof. Suitable for the Carson Stone Master (rear tipper trailer). Technical data: -Width: 125 mm (frame width) -Tooth rack: 8 mm x 8 mm -Weight: 260g -Operating voltage: 7,2 (if 12V is required, please note this in the checkout process) You can find 2 support controls for this trailer support here: Article 10675 (for 12V operation) Article 10681 (for 7,2V operation) Article 10676 (manual switch) These articles are NOT included in the scope of delivery of the support! The support control allows for simple and clean wiring.

No longer available

Product number: 11344

€ 269,00 *

Subscriptions

Details

Trailer double support. For trailers. Wedico standard

Trailer double support. For trailers. Wedico scale. Can be operated via servo or with a hand crank. With articulated base. Made of plastic, black. Servo linkage is included. The support can be operated by hand using a crank or with an optional servo (not included). Prepared for servo operation with a powerful standard servo. Scope of delivery: Trailer support kit for 60mm frame Servo bracket Linkage Operating instructions

Ready to ship in 5 days, delivery time 1-4 days

Product number: 12553

€ 79,94 *

Subscriptions

Replacement engine for trailer supports Tamiya 56505

1 engine for trailer supports (Tamiya). 1x replacement engine for article 7736.

Available immediately, delivery time: 1-4 days

Product number: 9927

€ 8,09 *

Subscriptions