Manual transmission

Transmission mount for 3-speed gearbox horizontal installation

Gearbox bracket for 3-speed gearbox, horizontal installation. With this holder, the gearbox hangs in the frame (output below). (251110). Hole spacing approx 39mm. ** DISCONTINUED ITEM!

No longer available

Product number: 1735

€ 8,22 *

Subscriptions

Details

Cardan Set 60-200mm -ScaleDRIVE-

1x Cardan Set Scale Drive. adjustable from 60-210mm. For diameters 4mm and 5mm shaft, aluminum shot.

Available immediately, delivery time: 1-4 days

Product number: 9638

€ 168,49 *

Subscriptions

1x torque set for Tamiya Schaltgetr- ove. Pinion

1x torque set for Tamiya manual gearbox. Motor pinion with 8 teeth and metal gearbox face plate. 500907115. This expansion kit increases the torque by approx. 20%, the driving speed slows down accordingly. The smaller motor pinion increases the torque by approx. 20% and the speed is reduced accordingly.

Available immediately, delivery time: 1-4 days

Product number: 7940

€ 19,99 * € 23,99 * (16.67% saved)

Subscriptions

1x Pinion, 12 teeth, brass. Gear width 11mm. 1x

1x Pinion, 12 teeth, brass. Gear width 11mm. 1x threaded cross bore M3 for mounting. Interior 4,2mm. Pinion for Wedico 3-speed four-wheel drive transmission.

Available immediately, delivery time: 1-4 days

Product number: 5631

€ 11,27 * € 11,65 * (3.26% saved)

Subscriptions

1x motor pinion 12 teeth, plastic, yellow. Gear width 8m

1x motor pinion 12 teeth, plastic, yellow. Gear width 8mm. Bore 4mm with flattening for motor axle. Motor pinion for Wedico adapter. Total width 8mm. Diameter 11mm.

Available immediately, delivery time: 1-4 days

Product number: 11314

€ 4,71 *

Subscriptions

1x Pinion, plastic, white. Gear width 8mm. Bohru

1x motor pinion, plastic, white. Gear width 8mm. Bore 4mm with flattening for Bühler motor. 14 teeth. Motor pinion for Wedico standard gears. Total width 10mm. Diameter 13mm. Modulus: 0,8

Available immediately, delivery time: 1-4 days

Product number: 9890

€ 4,36 *

Subscriptions

1x motor pinion, 12 teeth, plastic. Gear width 11mm

1x motor pinion, 12 teeth, plastic. Gear width 11mm. 1x threaded cross hole M3 for fastening. Inside 4,2mm. Motor pinion for Wedico 3-speed all-wheel drive transmission. Black. This pinion is also used when using the Wedico double motor transmission.

Available immediately, delivery time: 1-4 days

Product number: 10708

€ 4,65 *

Subscriptions

Motor flange with pinion for LRP, Carson, TruckPuller

Motor flange with pinion for LRP, Carson, TruckPuller. (251140). Mounting bolt circle 25mm. Also suitable for Truckmotor Truck Torque (10058).

Available immediately, delivery time: 1-4 days

Product number: 1833

€ 9,98 * € 10,40 * (4.04% saved)

Subscriptions

3-speed gearbox without motor / flange (251100)

3-speed manual gearbox without motor/flange (251100). All metal. Output shaft 5mm. Various motors can be used with various flange adapters (not included!).Reduction ratios:1st gear: 22,65:12nd gear: 11,32:13th gear: 5,66:1The manual gearbox can be attached horizontally or hanging in the frame, depending on the space available. The gearbox holder: - 1734 (the gearbox is located between the frame profiles) is available for this purpose (not included).As standard, the gearbox is screwed onto the frame side members using the mounting brackets that are integrated in the gearbox housing. No additional bracket is required for this.The gearbox is mounted, the motor and the matching flange are attached to the gearbox from the outside using 2 clamps. Shifting is done using a servo. The max. input speed is 6.500 rpm.

Available immediately, delivery time: 1-4 days

Product number: 2489

€ 189,00 * € 192,50 * (1.82% saved)

Subscriptions

Motor flange with pinion for Mabuchi, Igarashi, TM72, TM120,

Motor flange with pinion for Mabuchi, Igarashi, TM72, TM120, Carson Poison Truck, Venom truck engine (251160).

Available immediately, delivery time: 1-4 days

Product number: 2491

€ 10,78 *

Subscriptions

Transmission mount for 3-speed transmission vertical installation

Transmission mount for 3-speed gearbox mounted vertically. With this holder the transmission is under (driven side). (251120). Hole spacing 30mm.

Available immediately, delivery time: 1-4 days

Product number: 1734

€ 8,22 *

Subscriptions

3 manual gearbox without motor with transfer case

1x 3-speed manual gearbox without motor with transfer case and self-locking differential. Output shafts 5mm. Support brackets on the gearbox housing. Various motors can be used with different motor adapters (not included). (Not included in delivery).Reduction ratios:1st gear: 22,65:12nd gear: 11,32:13th gear: 5,66:1Gearbox housing made of aluminum, gears made of steel, hardened.10-fold ball bearings. Output shafts with a diameter of 5mm.The integrated self-locking differential compensates for speed differences. The gears are switched via a servo. The maximum permissible input speed is 6.500 rpm. The attachment to the frame is made using existing brackets on the gearbox housing. The frame width should be 60-63mm. Permanent all-wheel drive, self-locking differential to compensate for the speed differences in the drive train. Scope of delivery: 1 manual gearbox with distributor Fastening screws Linkage Dimensions: Length without motor: 80mm Width: 46,6mm Height: 64mm Suitable motor adapters: (not included) Article 1833, 2490, 2491, 1923, 2630, 8344.

Available immediately, delivery time: 1-4 days

Product number: 10860

€ 309,00 * € 317,90 * (2.8% saved)

Subscriptions

3-speed manual gearbox with WITHOUT distributor

3-speed manual transmission WITHOUT transfer case with 7,2V motor TM72. (251100) Output shaft 5mm. Incl. Motor adapter 251160. Reduction ratios: 1st gear: 22,65:12th gear: 11,32:13th gear: 5,66:1 SAVINGS PACKAGE: 3-speed manual transmission with 7,2V TM72 motor and motor adapter.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 7923

€ 223,85 *

Subscriptions

1 motor flange with pinion for Faulhaber motors of series

1 motor flange with pinion for Faulhaber motors of the 2642xx/2657xx series. Suitable for the 3-speed gearbox from Veroma. Incl. 3 screws DIN912 M3x5mm. Adapter fits the Faulhaber motors with the article numbers 8327 and 8328. The pinion supplied fits as an input gear for the Veroma 3-speed manual gearbox (article no. 2489, 1832 and 10860).

Available immediately, delivery time: 1-4 days

Product number: 8344

€ 17,80 *

Subscriptions

Aluminium 2-speed manual matching Tamiya scale

1x aluminum 2-speed manual gearbox suitable for Tamiya scale. 500907265 The CARSON drive concept for TAMIYA trucks in 1:14 scale. Convert your TAMIYA 2- or 3-axle TAMIYA tractor into an all-rounder with our self-locking axles. The components can be easily replaced as they are attached to the existing mounting points. A huge advantage of these axles is that no additional space is needed for a switching servo (linkages and Bowden cables), as they lock independently/automatically in the event of a loss of traction. Officially licensed by ZF Friedrichshafen AG.You decide how you want to convert your 2- or 3-axle tractor, this is possible in two stages:Configuration options for:2-axle tractors:Mercedes-Benz Actros Gigaspace 1845, MAN TGX 18.540, SCANIA R470, VOLVO FH12, Mercedes-Benz 1838LS, Mercedes-Benz 18501, 4x2 rear axle drive (with self-locking differential)- TAMIYA® 3-speed manual transmission (modular kit) with a CARSON rear axle (self-locking)2, 4x4 all-wheel drive with 2+2 speed transmission (front axle/rear axle/transfer case self-locking)- CARSON 2-speed manual transmission Compact in conjunction with the CARSON 2-speed transfer case torque compensation (self-locking), driven front axle (self-locking), rear axle (self-locking), drive shaft set 4x4.3-axle tractor: Mercedes-Benz Actros 3363, MAN TGX 26.540, SCANIA R620)1, 6x4 rear axle drive (with self-locking differential)- TAMIYA® 3-speed manual transmission (modular system) with two CARSON rear axles (self-locking), drive shaft set 6x4.2, 6x6 all-wheel drive with 2+2 speed transmission (front axle / rear axle / transfer case self-locking)- CARSON 2-speed manual transmission Compact in conjunction with the CARSON 2-speed transfer case torque compensation (self-locking), driven front axle (self-locking), two rear axles (self-locking), drive shaft set 6x6. CARSON 2-speed gearbox Compact (without motor)This compact 2-speed gearbox is intended for use in TAMIYA 2- and 3-axle chassis in conjunction with the 2-speed transfer case. It offers you the possibility to convert your model to all-wheel drive or upgrade. It impresses with its simple installation, as existing holes/threads are used. The small design enables the installation of the driven front axle (500907267 - front axle installation kit 500907280 is required). - Compact 2-speed manual transmission - 2 gears: gear ratio 1:11,3 (1st gear) and 1:5,666 (2nd gear) - 5-fold ball bearings - CNC machined aluminum housing - Hardened steel gears - Incl. Aluminum engine mount for 540 engines (suitable for CARSON and TAMIYA standard and truck engines) - Incl. Motor pinion (3,17mm) and fastening material- Easy installation by using existing holes (2 screws) on the ladder frame- 5 mm gear/output shaft- The gears are switched via a micro servo- Dimensions of the gear (o. Motor) LxWxH: 47 x 62 x 35 mm- Weight (o. Engine) approx.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 10040

€ 189,00 * € 200,00 * (5.5% saved)

Subscriptions

1x 3-speed manual transmission without engine with transfer case,

1x 3-speed manual gearbox without motor with transfer case, (251105). Output shafts 5mm. Various motors can be used using different flange adapters. (Not included in delivery).Reduction ratios:1st gear: 22,65:12nd gear: 11,32:13th gear: 5,66:1Gearbox housing made of aluminum, gears made of steel, hardened.8-fold ball bearings. Output shafts with a diameter of 5mm.The front axle can be switched on using a servo (not included). The gears are switched using a second servo. The maximum permissible input speed is 6.500 rpm.Suitable for scales 1:16 to 1:10.No gearbox holder is required for the current version.The attachment to the frame is done using the existing brackets on the gearbox housing. The frame width should be between 60-63mm. Scope of delivery: 1x manual transmission with distributor, fastening screws, linkages, dimensions: length: 80mm (without motor), width: 46,6mm (without support brackets), height: 64mm

Available immediately, delivery time: 1-4 days

Product number: 1832

€ 285,24 * € 299,00 * (4.6% saved)

Subscriptions

3-speed manual gearbox with WITHOUT distributor

3-speed manual transmission WITHOUT transfer case with 12V motor TM120. (251100) Output shaft 5mm. Incl. motor adapter. (251160). Reduction ratios: 1st gear: 22,65:12th gear: 11,32:13th gear: 5,66:1 SAVINGS PACKAGE: 3-speed manual transmission with 12V TM120 motor and motor adapter.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 7927

€ 215,32 *

Subscriptions

1x wheel 3-speed manual transmission, metal. (765). Wedico

1x all-wheel 3-speed manual transmission, metal. (765). Wedico. Permanent all-wheel drive. Multiple ball-bearing transmission. Servo-operated gears. Reduction ratios: 1st gear 12:12nd gear 6:13rd gear 3:1Output shafts to the front and rear each 4mm diameter with flattening.Suitable servo: item 11937.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 4041

€ 193,89 * € 193,98 * (0.05% saved)

Subscriptions

1 motor flange for Faulhaber motors of series

1 motor flange for Faulhaber motors of the 2642xx/2657xx series. Aluminum. Suitable for the 3-speed gearbox from Wedico. Incl. 3 screws DIN912 M3x30mm. Adapter fits the Faulhaber motors with the article numbers 8327 and 8328. Article 5631 (pinion) fits as an input gear for the Wedico 3-speed manual gearbox (article no. 4041). The pinion 5631 is NOT included.

Available immediately, delivery time: 1-4 days

Product number: 9352

€ 14,99 *

Subscriptions

Motor flange with pinion for Faulhaber (251150)

Motor flange with pinion for Faulhaber (251150). Outside diameter 36mm. Motor flanges suitable for the 3-speed gearboxes: - Article 10860 - Article 2489 - Article 1832 Suitable for the Faulhaber motors 3557xx.

Available immediately, delivery time: 1-4 days

Product number: 1923

€ 10,78 *

Subscriptions

3-speed manual gearbox with WITHOUT distributor

3-speed manual transmission WITHOUT transfer case with 12V Faulhaber motor. 251100. Output shaft 5mm. Incl. motor adapter. (8344). Reduction ratios: 1st gear: 22,65:12th gear: 11,32:13th gear: 5,66:1 SAVINGS PACKAGE: 3-speed manual transmission with 12V Faulhaber motor and motor adapter. (Faulhaber motor 12V, 2657CR).

Ready to ship in 5 days, delivery time 1-4 days

Product number: 8352

€ 375,04 *

Subscriptions

3-speed manual transmission with switchable transfer case

3-speed manual transmission with switchable transfer case for all-wheel drive, motor adapter (251160) and 7,2V TM72 motor (251105). Output shafts 5mm. Reduction ratios: 1st gear: 22,65:12th gear: 11,32:13th gear: 5,66:1 SAVINGS PACKAGE: 3-speed manual transmission with 7,2V TM72 motor and motor adapter, switchable transfer case for all-wheel drive.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 7924

€ 309,58 *

Subscriptions

3-speed manual gearbox with WITHOUT distributor

3-speed manual transmission WITHOUT transfer case with 12V motor truck puller3. Output shaft 5mm. Incl. motor adapter 251140. (251100). Reduction ratios:1st gear: 22,65:12th gear: 11,32:13th gear: 5,66:1SAVING PACKAGE: 3-speed manual transmission with 12V truck puller3-motor and motor adapter.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 7929

€ 234,73 *

Subscriptions

3-speed manual transmission with switchable transfer case

3-speed manual transmission with switchable transfer case for all-wheel drive, motor adapter (8344) and 12V Faulhaber motor 2657CR. (251105). Output shafts 5mm. Reduction ratios: 1st gear: 22,65:12th gear: 11,32:13th gear: 5,66:1 SAVINGS PACKAGE: 3-speed manual transmission with 12V Faulhaber motor, motor adapter, switchable transfer case for all-wheel drive.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 8351

€ 458,59 *

Subscriptions

Motor pinion, plastic, white, 15 teeth. For planetary drinks

Motor pinion, plastic, white, 15 teeth. For planetary gears (Bühler).

Available immediately, delivery time: 1-4 days

Product number: 12043

€ 4,45 *

Subscriptions

3-speed manual transmission with switchable transfer case

3-speed manual transmission with switchable transfer case for all-wheel drive, motor adapter and 12V Truck-Puller3 motor. Output shafts 5mm. (251105). Adapter type: 251140. Reduction ratios: 1st gear: 22,65:12th gear: 11,32:13th gear: 5,66:1 SAVINGS PACKAGE: 3-speed manual transmission with 12V Truck-Puller3 motor and motor adapter, switchable transfer case for all-wheel drive. Adapter 1833 (251140).

Ready to ship in 5 days, delivery time 1-4 days

Product number: 7928

€ 323,98 *

Subscriptions

3-speed manual transmission with switchable transfer case

3-speed manual transmission with switchable transfer case for all-wheel drive, motor adapter (251140) and 7,2V Truck-Puller3 motor. Output shafts 5mm. (251105). Reduction ratios: 1st gear: 22,65:12nd gear: 11,32:13th gear: 5,66:1 SAVINGS PACKAGE: 3-speed manual transmission with 7,2V Truck-Puller3 motor and motor adapter, switchable transfer case for all-wheel drive.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 7931

€ 323,98 *

Subscriptions

3-speed manual transmission with switchable transfer case

3-speed manual transmission with switchable transfer case for all-wheel drive, motor adapter (2491) and 12V TM120 motor (251105). Output shafts 5mm. Reduction ratios: 1st gear: 22,65:12th gear: 11,32:13th gear: 5,66:1 SAVINGS PACKAGE: 3-speed manual transmission with 12V TM120 motor and motor adapter, switchable transfer case for all-wheel drive.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 7926

€ 300,68 *

Subscriptions

3-speed manual gearbox with WITHOUT distributor

3-speed manual transmission WITHOUT transfer case with 7,2V motor truck puller3. Output shaft 5mm. Incl. motor adapter. (251100). Reduction ratios:1st gear: 22,65:12nd gear: 11,32:13th gear: 5,66:1SAVING PACKAGE: 3-speed manual transmission with 7,2V truck puller3-motor and motor adapter (item 1833, (251140)).

Ready to ship in 5 days, delivery time 1-4 days

Product number: 7930

€ 234,73 *

Subscriptions

1x drive shaft 350 mm long. Hexagon SW6

Ready to ship in 5 days, delivery time 1-4 days

Product number: 4645

€ 9,95 *

Subscriptions

Motor flange with pinion for Bühler (new) (251130)

Motor flange with pinion for Bühler (new) (251130).

Available immediately, delivery time: 1-4 days

Product number: 2490

€ 10,78 *

Subscriptions

Motor flange with pinion for Bühler (old) (251135)

Motor flange with pinion for Bühler (old) (251135).

Available immediately, delivery time: 1-4 days

Product number: 2630

€ 10,89 *

Subscriptions

2-speed gearbox without motor reducer 1: 1 / 1: 2

2-speed manual transmission without motor, reduction ratio 1:1 / 1:2 (242424), output shaft SW 5mm. The steel universal joints with the article numbers 6512, 6452 fit this.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 4281

€ 199,18 * € 209,00 * (4.7% saved)

Subscriptions

2-speed main gearbox incl. 3 Pinion Housing made of aluminum,

2-speed main gearbox including 3 motor pinions. Housing made of aluminum, gears made of steel, all shafts with ball bearings. Shafts 4mm. Usable motors: Bühler (WDC), Faulhaber 3557C/CS. Reduction ratios: with motor pinion 15 teeth: 14,4:1 / 7,2:1 with motor pinion 20 teeth: 10,8:1 / 5,4:1 with motor pinion 25 teeth: 8,64:1 / 4,32:1 Adapter ring for motor mounting is included.

End of life - article no longer available!

Product number: 5630

€ 194,99 *

Subscriptions

Details

ScaleART 3 gear box "Duty"