Steering axles

1 tie rod, bent steel. Improved steering response

1 tie rod, bent, steel. Improves the steering behavior. Suitable for all Tamiya Euro tractors. (500013516). Overall length 105mm with each M3 thread on both ends.

Available immediately, delivery time: 1-4 days

Product number: 6612

€ 7,49 * € 8,49 * (11.78% saved)

Subscriptions

driven rear axle with self-locking differential

1x driven rear axle with self-locking differential with/without through-drive. Tamiya scale. Officially licensed by ZF Friedrichshafen AG. 500907268 The CARSON drive concept for TAMIYA trucks in 1:14 scale. Convert your TAMIYA 2- or 3-axle TAMIYA tractor into an all-rounder with our self-locking axles. The components can be easily replaced as they are attached to the existing mounting points. A huge advantage of these axles is that no additional space is needed for a switching servo (linkages and Bowden cables), as they lock independently/automatically in the event of a loss of traction. Officially licensed by ZF Friedrichshafen AG.You decide how you want to convert your 2- or 3-axle tractor, this is possible in two stages:Configuration options for:2-axle tractors:Mercedes-Benz Actros Gigaspace 1845, MAN TGX 18.540, SCANIA R470, VOLVO FH12, Mercedes-Benz 1838LS, Mercedes-Benz 18501, 4x2 rear axle drive (with self-locking differential)- TAMIYA® 3-speed manual transmission (modular kit) with a CARSON rear axle (self-locking)2, 4x4 all-wheel drive with 2+2 speed transmission (front axle/rear axle/transfer case self-locking)- CARSON 2-speed manual transmission Compact in conjunction with the CARSON 2-speed transfer case torque compensation (self-locking), driven front axle (self-locking), rear axle (self-locking), drive shaft set 4x4.3-axle tractor: Mercedes-Benz Actros 3363, MAN TGX 26.540, SCANIA R620)1, 6x4 rear axle drive (with self-locking differential)- TAMIYA® 3-speed manual transmission (modular system) with two CARSON rear axles (self-locking), drive shaft set 6x4.2, 6x6 all-wheel drive with 2+2 speed transmission (front axle / rear axle / transfer case self-locking)- CARSON 2-speed manual transmission Compact in conjunction with the CARSON 2-speed transfer case torque compensation (self-locking), driven front axle (self-locking), two rear axles (self-locking), drive shaft set 6x6. CARSON rear axle with self-locking differentialDetailed rear axle for TAMIYA model trucks in 1:14 scale. The axle is equipped with a self-locking differential and can be built with or without a through drive; both shafts and housing covers are included in the scope of delivery. If traction is lost, the differential locks independently/automatically and generates 100% traction. A big advantage of this drive axle is that NO shift servos, Bowden cables and linkages are required for the differential locks, which also benefits the clarity and space available in the chassis. The axle components are housed in a heavy-duty reinforced plastic axle housing. Furthermore, the rear axle can also be operated in conjunction with the standard TAMIYA 3-speed manual transmission; only the 3x6 drive shaft set (4) must be used for the 500907279-axle tractors. - True to detail rear axle - Reinforced plastic axle housing - High ground clearance thanks to a "slim" differential housing (height 33 mm) - 12-fold ball bearing - Hardened steel bevel gears - Axle ratio 1:2,66 - 5 mm transmission/input shaft - Aluminum rim driver 12 mm hexagon - Easy conversion to an axle with and without through-drive (both shafts and housing cover are included in the axle kit) - Dimensions rear axle LxWxH: 44 x 135 x 33 mm - Weight approx.

Available immediately, delivery time: 1-4 days

Product number: 10032

€ 199,00 * € 235,00 * (15.32% saved)

Subscriptions

Studs conversion kit for Tamiya 1-front axle. Significant

Wheel bolt conversion kit for 1 Tamiya front axle. Significant reduction in play compared to the kit bolts. Steel. (500907091).

Available immediately, delivery time: 1-4 days

Product number: 5620

€ 15,99 * € 18,29 * (12.58% saved)

Subscriptions

2 aluminum axles with steering arm for aluminum steering axle (Artike

2 aluminum wheel axles with steering arm for aluminum steering axle (item 7592). Made of solid aluminum. Diameter of the axle stubs: 5mm Thread: M4 Length of the axle stubs with thread: 17,5mm

Ready to ship in 5 days, delivery time 1-4 days

Product number: 9143

€ 31,99 * € 36,49 * (12.33% saved)

Subscriptions

Front differential -ScaleDRIVE-

1x front differential, kit, differential axle without drive-through 10 ballraces translation 2,67: 1 not blocked! Milled steel and bronze gears.

Available immediately, delivery time: 1-4 days

Product number: 9631

€ 132,49 *

Subscriptions

Front Axle not driven -ScaleDRIVE-

1x front axle, not driven, kit. Glass fiber reinforced plastic. 4 ball bearings, 2 axle widths. Each set includes 2 axle bodies. This allows an axle width of either 165mm (Wedico scale) or 177mm (Tamiya scale) to be achieved. The spring packages (suitable for the two scales) can also be mounted with different spring package spacing.

Available immediately, delivery time: 1-4 days

Product number: 9623

€ 51,99 *

Subscriptions

1 through drive set, kit, (for 1 axle) -extends the

1 through-drive set, kit, (for 1 axle) - extends the ScaleDRIVE axles with through-drive. Double ball bearing. Drive pinion made of stainless steel. Through-drive outlet 2mm with one-sided flattening.

Available immediately, delivery time: 1-4 days

Product number: 9632

€ 16,90 *

Subscriptions

1x aluminum front axle for all Tamiya trucks. Completely

1x aluminum front axle for all Tamiya trucks. Complete with Lenkschenkel- bearings. Made of solid aluminum. 145x15x25mm.

Available immediately, delivery time: 1-4 days

Product number: 7592

€ 35,99 * € 45,99 * (21.74% saved)

Subscriptions

Front axle for standard chassis (Wedico), with steering wheel

Front axle for standard chassis (Wedico), with steering and wheels. Complete front axle with rims, tires, springs and instructions. Scope of delivery: Front axle kit Spring packages 2 tires 2 rims (chrome-plated) Steering Tie rod Assembly instructions Dimensions: Drilling distance for spring assembly: 80mm Wheel diameter: 73mm Track width: 163mm

Available immediately, delivery time: 1-4 days

Product number: 11528

€ 37,95 * € 39,95 * (5.01% saved)

Subscriptions

1x driven front axle with self-locking Differenzia

1x driven front axle with self-locking differential with/without through-drive. Wedico scale. Officially licensed by ZF Friedrichshafen AG. New drive concept for trucks in Wedico scale 1:16. Convert your 2- or 3-axle tractor into an all-wheel all-rounder with these self-locking axles. The components can be easily replaced as they are attached to the existing mounting points. A big advantage of these axles is that no additional space is required for a switching servo (linkages and Bowden cables) as they lock independently/automatically if traction is lost. The drive axle is permanently locked and opens when cornering. Officially licensed by ZF Friedrichshafen AG. Detailed front axle for model trucks in 1:16 scale. The axle is equipped with a self-locking differential and can be built with or without through-drive, both shafts and housing covers are included in the scope of delivery. If traction is lost, the differential locks independently/automatically and generates 100% traction. A major advantage of this drive axle is that NO switching servos, Bowden cables and linkages are required for the differential locks, which also benefits the clarity and space available in the chassis. The axle components are housed in a heavy-duty reinforced plastic axle housing. Furthermore, the front axle can also be operated in conjunction with manual/distribution gearboxes from various manufacturers. Details: - True to detail, reproduced front axle - Reinforced plastic axle housing - High ground clearance thanks to a slim differential housing (height 35 mm) - 13-fold ball bearings - Hardened steel bevel gears - Axle ratio 1:3 - the direction of rotation can be adapted to your model by installing the differential accordingly - 4 mm gearbox/input shaft - 6mm axle shaft with flanged wheel hub. The most common rims in 1:16 scale fit (bolt circle 22mm).- Easy conversion to axle with and without through-drive (both shafts and housing cover are included in the axle kit)- Dimensions front axle LxWxH: 57 x 167 x 35 mm- Weight approx. 160 g- Supplied as a kit with pre-assembled differential- Suitable for most axle suspensions- Incl. attachment point for swing axle suspension systems- Self-locking differential (shift servo, linkages and Bowden cables are not required)Officially licensed by ZF Friedrichshafen AG.

Available immediately, delivery time: 1-4 days

Product number: 10797

€ 209,00 * € 218,90 * (4.52% saved)

Subscriptions

Aluminium front axle, complete, front axle beams from

Aluminum front axle, complete, front axle body made of cast aluminum, track rod, steering knuckle, axle stub, all small parts, instructions. (701). The metal front axle has stainless steel axles to accommodate the Wedico plastic rims and aluminum rims with ball bearings. The front axle fits the springs 3371 and 4013. Scope of delivery: Front axle kit with construction plan. Dimensions: Width: 165mm Spring mount: 68x10mm Axle shaft: 4x12mm, M3 Distance to steering lever pivot point: 120mm

Available immediately, delivery time: 1-4 days

Product number: 4777

€ 49,94 * € 90,70 * (44.94% saved)

Subscriptions

1 countershaft set, kit (for 1 axis) increases ferrying

1 reduction gear set, kit (for 1 axle), increases the ratio of the ScaleDRIVE axle up to 5,67:1. Can be expanded with or without through drive. 4 ball bearings. All shafts made of stainless steel. Input shaft: 4mm with one-sided flattening.

Available immediately, delivery time: 1-4 days

Product number: 9633

€ 30,50 *

Subscriptions

Steering axle with planetary gear M1: 8 fully ball bearing

Steering axle with planetary gear M1:8, completely ball-bearing mounted, without drive-through with hub cap and screws/small parts, 8 ball bearings, 4 plain bearings, (220916) The steering axle is screwed directly onto the rims - no additional rim adapters are required. Suitable for the rear axle (item 3360). Suitable rims: items 4282, 4283, 6511, 4284. Front axle with external planetary gear, with additional reduction (planetary gear) on the drive axle, total reduction 10,16:1, suitable for the rear axle item no. 3360, 8-way ball bearing, 4-way plain bearing, drive and output via a hexagonal shaft SW5, no rim adapters are required, tie rod, wheel bolts and cover hubs with decorative screws are included. Dimensions: Total width 305mm Track width 282mm (measured at the rim mount)Center spring bracket 126mmDiameter planetary housing 69mmWeight 1470grSteering angle 40°

Ready to ship in 5 days, delivery time 1-4 days

Product number: 5186

€ 461,36 * € 479,00 * (3.68% saved)

Subscriptions

Front axle suspension 1:8, aluminum. (216720) All

Front axle suspension 1:8, aluminum. (216720) All connecting parts between leaf springs and frame for 1 front axle 1:8.

Available immediately, delivery time: 1-4 days

Product number: 5608

€ 35,03 * € 35,99 * (2.67% saved)

Subscriptions

1x double front axle for low loader, steerable. Wedico

1x double front axle for low loader, steerable. Wedico. Track width approx. 170mm. Steerable double front axle for low loader. The kit contains all the parts shown in the picture. With this axle combination you can convert your low loader into an extremely maneuverable trailer. Supplied with gray and chrome-plated rims.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 4632

€ 192,85 * € 193,98 * (0.58% saved)

Subscriptions

Front for Oldtimer Trucks (220994)

Available immediately, delivery time: 1-4 days

Product number: 2468

€ 38,97 * € 39,00 * (0.08% saved)

Subscriptions

Gooseneck Dolly (Kit unpainted) Wedico scale. (270)

Gooseneck dolly (unpainted kit) Wedico scale. (270). Stamped sheet metal parts, plastic molded parts, standard saddle, 2-axle mudguard made of checkered sheet metal, 4 gray plastic rims, 5 chrome-plated plastic rims, 9 tires 315/80R22.5, axles, polished aluminum rear bumper with round taillights/indicators, spring package with axle holders, 2 tool boxes with movable lid, small parts, illustrated assembly instructions.

No longer available

Product number: 4670

€ 180,00 * € 199,00 * (9.55% saved)

Subscriptions

Details

Front, not driven 1: 8, aluminum, cast, with

Front axle, not driven 1:8, aluminum, cast, with tie rod, rod ends, axle stubs. Width 258mm (steering knuckle outside without axle stub). (223874) Front axle with tie rod, front axle made of light alloy, completely assembled with linkages and axle shafts. Steel tie rod, black. Width without axle shafts 260 mm, axle diameter 6mm, axle length 18 mm, spring bracket brackets 28 x 19 mm, distance between the spring bracket brackets (center to center) 98 mm. Solid, heavy-duty design.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 5606

€ 118,75 * € 119,00 * (0.21% saved)

Subscriptions

Front axle 1:14 made of metal JX model

Tamiya steering axle made of metal almost free of play. 5mm stub axle JX model

Available immediately, delivery time: 1-4 days

Product number: 12862

€ 67,00 * € 69,95 * (4.22% saved)

Subscriptions

1x slip differential, metal 2: 1 front axle without

1x limited-slip differential, metal 2:1 front axle without drive (770). Wedico. The aluminum rim sets with the item numbers 4759 and 4758 are suitable for this driven steering axle.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 4809

€ 241,50 * € 249,00 * (3.01% saved)

Subscriptions

1 Front without through drive with locking differential, 3: 1

1 front axle without drive through with limited-slip differential, 3:1 gear ratio, metal. Switchable lock. (Wedico 767). The aluminum rim sets with the article numbers 4759 and 4758 are suitable for this driven steering axle.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 4038

€ 249,00 *

Subscriptions

Axle connection set 1 set (output) for connecting

Axis connection kit 1 rate (output) for connecting 2 driven front or rear axles, built in the first driven axle, suitable for all robbe-ALU-axis!

No longer available

Product number: 5059

€ 22,00 *

Subscriptions

Details

1 front axle with drive through and locking differential 3:1

1 front axle with through drive and limited-slip differential 3:1 reduction, metal. (763). Wecico. The aluminum rim sets with the article numbers 4759 and 4758 are suitable for this driven steering axle.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 4036

€ 277,20 *

Subscriptions

1 front axle differential WITHOUT through-drive with switchable

1 front axle differential WITHOUT through-drive with switchable differential lock. Reduction ratio 3:1. (ScaleArt). For Tamiya chassis. -unpainted-. Front axle differential WITHOUT through-drive 3:1 Tamiya variant. Do you already have a ScaleART axle? Then you can also purchase the rear axle adapter for Tamiya chassis separately from our shop. The axle is made entirely of metal, has 6-12 ball bearings and is fitted with milled steel gears. The driven front axles are equipped with constant velocity joints made of steel, which are essential for smooth driving behavior when cornering.The axle ratio of all axle variants, which is based on experience, corresponds to a factor of 3:1.All axle variants have a switchable differential lock as standard.A true-to-original appearance and absolutely stable technology were the most important criteria in the development and construction of the new ScaleART axles.Technical data:Weight approx. 185g.Input shaft: 4mm with one-sided flatteningOutput: hub adapter with 22mm bolt circleRim attachment: 10x M2 threaded holesTotal width: 184mmTotal height: 31,5mmHole spacing for spring packages: 68mm+79mm/10mm+12mmHoles for spring packages: 3mm

Ready to ship in 5 days, delivery time 1-4 days

Product number: 10184

€ 349,00 * € 369,95 * (5.66% saved)

Subscriptions

Front axle with hub reduction 170mm, lock left

Front axle with hub reduction 170mm, lock left without through drive, hub caps SX, 4 planet AFV. Axle black.

No longer available

Product number: 2656

€ 340,99 *

Subscriptions

Details

Front axle with hub reduction 155mm without lock,

Front axle with hub reduction 155mm without lock, without through drive, hub caps SX, 3 planet AFV PL-16 100-

No longer available

Product number: 2618

€ 235,00 *

Subscriptions

Details

1x slip differential, metal 2: 1 front axle with

1x limited-slip differential, metal 2:1 front axle with through-drive. (752). Wedico. The aluminum rim sets with the item numbers 4759 and 4758 are suitable for this driven steering axle.

Ready to ship in 5 days, delivery time 1-4 days

Product number: 4801

€ 277,20 *

Subscriptions