VAT included plus shipping and handling
Immediate dispatch, delivery time is about 1-4 days **
- Article no.: 11003
EasyBus KLM 4 / 16 lighting system for Tamiya Mercedes-Benz Actros 3363
The lighting system for the TAMIYA Actros 3363 with the new KLM 4 / 16, ready-to-install lighting boards and integrated infrared transmitter.
The lighting boards are simply inserted from the back into the light chambers and hold by press fitting.
The system is controlled by a KLM 4 / 16, which is compatible with ordinary forward / reverse cruise controls (with or without a separate brake), cruise control and all sound modules.
The light functions can be controlled either with our control pad or in many other ways, details can be found in the online manual.
This starter set includes a complete lighting system for the Mercedes-Benz Actros 3363 by TAMIYA and consists of two front lighting boards with wired LEDs for the side turn signals, underride protection and marker lights, as well as a lighting assistant KLM 4 / 16.br> The lighting boards are connected directly to the KLM 4 / 16 are connected and can be configured via this also with our power plant ControlPanel. Brightness, flashing speeds, but also the basic functionality (eg: should be switched on the output, the high beam) can be set separately for each output. You will find information about this
Highlights & Details
- KLM 4 / 16 (4 servo inputs, 16 switching outputs, 5 bus outputs)
- Ready to install lighting boards
- Plug & Play solution (connect and drive)
- Compatible with all sound modules
- Compatible with all travel controllers
- Compatible with Tamiya MFU
- Expandable with different lighting boards
- Extendable with infrared for trailer lighting
- Adaptable to the prototype to the smallest detail via PC
- No programming skills required
- downzuloaden software free - PC
Technical data
Power supply: - via receiver power supply (BEC of the travel controller)
- Max. Power consumption 20mA per device and 20 mA per LED
LEDs front (per side): - Ultra bright high power LEDs
- Additional outputs front 3 with each 180Ohm resistor
LEDs rear (per side): - red: 1x 3mm, 1x 5mm
- yellow: 1x 5mm
- white: 1x 3mm
- Ultra bright high power LEDs
- Additional rear outputs per 2 with 180Ohm resistor
LEDs above (KLB 8-20): - white 5x 3mm (lamp bracket)
- 2x 3mm (bounding gauge)
- free: 1x switching output
LEDs front bar: - white 4x 3mm
What's in the box - Lighting assistant KLM 4 / 16
- four ready-to-install lighting boards (2x front, 2x rear)
- KLB 8 - 20 with 7x 3mm LEDs white for roof lighting
- 4x 3mm LEDs for the front lighting