EasyBus Lighting System KLM 4 / 16 TAMIYA MB Arocs 3363

EasyBus lighting system KLM 4/16 for Tamiya Mercedes-Benz Arocs 3363.

The lighting system for the TAMIYA Arocs 3363 with the new KLM 4 / 16, ready-to-install lighting boards and integrated infrared transmitter.
The lighting boards are simply inserted from the back into the light chambers and hold by press fitting.
The system is controlled by a KLM 4 / 16, which is compatible with ordinary forward / reverse cruise controls (with or without a separate brake), cruise control and all sound modules.

The light functions can be controlled either with our control pad or in many other ways, details can be found in the online manual.
This starter kit includes a complete lighting system for the Mercedes-Benz Arocs 3363 from TAMIYA and consists of two front lighting boards with wired LEDs for the side indicators, underride protection and marker lights, as well as a light assistant KLM 4 / 16.br> The lighting boards are connected directly to the KLM 4 / 16 are connected and can be configured via this also with our power plant ControlPanel. Brightness, flashing speeds, but also the basic functionality (eg: should be switched on the output, the high beam) can be set separately for each output. You will find information about this

Highlights & Details

KLM 4 / 16 (4 servo inputs, 16 switching outputs, 5 bus outputs)

Ready to install lighting boards

Plug & Play solution (connect and drive)

Compatible with all sound modules

Compatible with all travel controllers

Compatible with Tamiya MFU

Expandable with different lighting boards

Extendable with infrared for trailer lighting

Adaptable to the prototype to the smallest detail via PC

No programming skills required

downzuloaden software free - PC

Technical data

Power supply:

via receiver power supply (BEC of the travel controller)

Max. Power consumption 20mA per device and 20 mA per LED

LEDs front (per side):

yellow: 1x 3mm

white: 2x 3mm, 1x 5mm

yellow wired: 2x 3mm

white wired: 1x 3mm

Ultra bright high power LEDs

Additional outputs front 3 with each 180Ohm resistor

LEDs rear (per side):

red: 1x 3mm, 1x 5mm

yellow: 1x 5mm

white: 1x 3mm

Ultra bright high power LEDs

Additional rear outputs per 2 with 180Ohm resistor

What's in the box

Lighting assistant KLM 4 / 16

four ready-to-install lighting boards (2x front, 2x rear)